PROBLEM WITH PT880 Neo WHEN INSTALL NEW 36GB RAPTOR SATA HD

I JUST BOUGHT NEW SYSTEM: PT880NEO, P4 3.2GHZ, 800MHZ, 512 KB L2 CACHE. I HAVE 2 PROBLEMS:
1. WHEN I INSTALLED BRAND NEW WD 200GB ULTRA ATA/100 WITH WINDOW XP PRO, XP ONLY REGCONIZED MY HARD DRIVE: 127 GB ONLY EVEN I CONNECTED MY HD THROUGH PROMISE ULTRA 100 PCI CARD.
2. WHEN I TRY TO INSTALL XP PRO ON THE OTHER BRAND NEW 36GB WD RAPTOR SATA, THE MOBO SYSTEM SAW THE HD BUT THE WINDOW XP DID NOT REGCONIZED MY SATA HD.  
I REVIEWED SOME IDENTICAL PROBLEMS FROM THE FORUM BUT I AM STILL CONFUSING. ANYONE CAN SHOW ME EXACTLY WHAT SHOULD I DO. THANKS ALOT.

first things first, read the Moan Guide, and also check out the Rules Of The Forum as the forum users will reply more often and faster.
Hoping everything will boot up soon for ya.

Similar Messages

  • I have a problem with Apple store when installing large application: The system crashes. Any suggestion?

    I have a problem with Apple store when installing large application (example xCode): The system crashes.
    It begun with 10.8 usualy with few tries it work but with 4.6 no succes.
    Any suggestion?

    If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • Problem with PT880 NEO & Prescott 2.8 ghz

    Hello everyone, I've got a big problem, I've just bought a new motherboard VIA PT 880 NEO and also a CPU Intel Pentium IV 2.8 ghz System Bus 800 Mhz (Prescott) and finally, 2 memories DDR 400 mhz of 512 Mb each
    My problem is that everything turns on and it seems to be ok but when it should boot it hangs and nothing else happens, sometimes it shows a blue screen saying that the system was stopped to avoid damages and some other times the screen remains black with the cursor on the upper left corner and nothing else, and some other times it shows strange symbols on the screen
    I've tryed to boot with a hard disk and with a bootable cd and the result is the same.
    I'm desperate!!!!!!. Can anyone help me????
    Thanks
    Martin
    P.S.: sorry about my english, I'm from Argentina and I don't speak it very well
    P.S.2: something else, I've tried the motherboard with other CPU and Memory and works fine and I've tried the CPU and memories with other motherboard and it also works fine

    Your in the same situation I was in a month ago.
    You need a Northwood processor to flash your bios to 1.5, your motherboard or my motherboard does not support the 800fsb prescott, until you flash bios to latest.
    So I see you say you tried another processor on the board, so use that to flash bios. Live Update will do it for you.

  • Problem with PT880 NEO-V

    I have a board PT880 (MSI-7043) I always have problem with the the board detecting the new SATA HDD, currently I'm currently using fedora 10.
    right now it doesnt detect any new hdd with or withour OS, please help me with this

    Read >>Posting Guide<<
    Have you setup the SATA drive to SATA 1?

  • Error With Configuration Assitant When Installing New Oracle10g

    hello,
    when installing oracle10g enterprise edition for win32, I am recieving the following read errors. I have tried downloading the installation file several times, and even saving/installing oracle to different drives, but the same error always appears. I have successfully installed oracleXE on this machine (it is still installed). is there a work around for this? this did not appear to be a known error-
    the errors ---
    ERROR at line 1:
    ORA-19624: operation failed, retry possible
    ORA-19501: read error on file "C:\ORACLE\PRODUCT\10.2.0\DB_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE.DFB", blockno 384 (blocksize=8192)
    ORA-27070: async read/write failed
    OSD-04016: Error queuing an asynchronous I/O request.
    O/S-Error: (OS 1450) Insufficient system resources exist to complete the requested service.
    ORA-19870: error reading backup piece C:\ORACLE\PRODUCT\10.2.0\DB_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE.DFB
    ORA-19501: read error on file "C:\ORACLE\PRODUCT\10.2.0\DB_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE.DFB", blockno 128 (blocksize=8192)
    ORA-27070: async read/write failed
    OSD-04016: Error queuing an asynchronous I/O request.
    O/S-Error: (OS 1450) Insufficient system resources exist to complete the requested service.
    ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 5149
    ORA-06512: at line 16

    Hi,
    have tried downloading the installation file several times
    First uninstall enterprise software complete and install WITHOUT database option.
    and after installation CREATE MANUALLY DATABASE.
    http://dbataj.blogspot.com/2006/11/manually-database-creation.htmlregards
    Taj

  • Problem with adobe reader when installing on mac book. "Internal error occured".

    Both me and my friend installed Adobe reader on our mac books this week, and it doesn't work. The only thing that happens when we try to open the program is an text message with "Internal error occured". And that's it. The PDF-file is not the problem, and I have the latest version of Mac operating system, so that's not the problem eighter. Mac support told me to contact you. Please help me as soon as possible. Thanks! /Amanda

    Hello,
    Please try to download the new installer from this location and see if that works -Adobe - Adobe Reader download - All versions
    ~Deepak

  • Problem with User settings when installing Adobe Creative Suite

    Interesting problem which seems more related to the Mac OS than to the Adobe installer. Each time I tried to install the Suite I kept getting the error message: "Installer Failed to Initialize" immediately.
    I tried the remedies on the Adobe website with no help.
    Finally I found a discussion thread that suggested I try creating a new Administration User - log into that account and try installing the suite from there .
    It worked like a charm and installed properly. Since the programs were installed in the Application folder I was able to switch back to MY User account and use the programs fine.
    Can anyone hazard a guess as to what "evil" files in my Home folder caused this problem?
    Could it happen to other program installations with similar files?
    Thanks.

    We cannot know. Your information is hugely insufficient. Check Your Windows Event Viewer and tell us the "fault module" plus provide detailed specs for your computer. Runtime errors usualyl mean that A DLL is missing, a security tool is blocking critical functions or that the processor is not compatible in teh first place. Just as well this could be a driver issue with your SATA bus or whatever.
    Mylenium

  • Problems with external/usb after installing new hard drive

    After having a new hard drive installed (from Mac 10.5.2 to 10.6.8) I have experienced 2 problems so far:
    1. I am getting no response (from anything connected from my usb port) ie. mouse.  But plugging in the mouse directly into the mac works fine.
    2. After a few minutes, the sound from my production speakers (connected: macbook->usb cord->sound card-> production speakers) starts to skip and then no sound at all, however my soundcard is still working as I see the light is on.
    Can anyone let me know how this can be fixed?  I never had these problems before getting the new hard drive.

    try doing a PRAM/NVRAM reset.......
    that might sort out your issues.......
    good luck.....hope it works for you...

  • Problem with license create when installing WEB AS 6.20

    I'm getting the following error message when doing the install. I'm about 91% completed when this happens.
    Info: InstController MakeStepsDeliver 2 718
    Creating the SAP System License
    Info: DBR3LICENSECREATE SyCoprocessCreate 2 718
    Creating coprocess C:\MiniWAS\saplicense ...
    Info: DBR3LICENSECREATE ExecuteDo 2 718
    RC code form SyCoprocessWait  = -112 .
    Error: DBR3LICENSECREATE ExecuteCheck 2 718
    Exit code from C:\MiniWAS\saplicense: -112.
    Error: DBR3LICENSECREATE InternalInstallationDo 2 718
    Phase failed.
    Error: DBR3LICENSECREATE InstallationDo 2 718
    Phase failed.
    Error: Main {} 2 718
    I'm on the internet when doing this. Are there some settings I have to change? I would appreciate any ideas on what is going on. Thank you.

    Hi Steven,
    Looks like the temporary license for 4 weeks during the
    installation of WAS 620 is not being created.
    This might help
    http://help.sap.com/saphelp_webas620/helpdata/en/a7/512d23407a11d1893b0000e8323c4f/frameset.htm
    Also you may as well want to check sapinst_dev.log, keydb.xml, control.xml, dev_slic etc.
    Regards
    Srikishan

  • I have a problem with IOS 7 when I am installing app on App Store. I must read and accept new terms and condition. However, I read all new terms that I don't see Agree button to accept. Can you check help me this problem?

    I have a problem with IOS 7 when I am installing app on App Store. I must read and accept new terms and condition. However, I read all new terms but I still don't see "Agree" button to accept. Can you check help me this problem?

    If it says 'Open' in the App Store, then it's on your device.  What happens when you press the 'Open' button in the App Store?
    The App is on your phone, somewhere.  Use Spotlight to find it, or you can reset your Home Screen layout, and then you'll definitely find it.

  • Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

    Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

    I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.

  • When installed JDK but I have problem with System vars may install bundle

    When installed JDK but I have problem with System vars may install bundle [netbeans&JDK] WITHOUT UNISTALLING initial JDK or needed uninstall first ?

    With the word 'automatically', yes you do need pulseaudio. I'm sure you could cook up some udev or related rule to do that in Alsa, but pulseaudio would be easier.

  • Problem with repaired neo fis2r

    I am experiencing performance problems with my neo tha t I am not sure where to begin trouble shooting. I had an video card falure(delaminated pin on agp ) which resulted in damage to the agp slot I rma 'd my neo and it returned marked repaired with a grey agp slot , bios 1.4 ( had 1.6 installed) and the same serial #. I reinstalled all components. noted the retrograde bios and flashed to 1.8. then I attempted to return all settings to theyre original state only to find that I can't overclock! previously I got 250mhz clock with perf mode set to ultra turbo and ram set to 333mhz . now I can't get past perf mode fast and 205mhz no matter what. I see references to bios 1.8 as being not very overclockable.this may be the problem but  the waters have been muddied by the multitude of events. I am not an expert and do not know where to start. I was so thrilled with the performance of my neo and now I am at a loss . Is the bios responsible for this abysmal performance or is my system still compromised? I don't know what to do to determine its state. my system is as follows:-
    neo fis2r( of course)
    2.4c p4 with zalman alcu 7000
    ati 8500dv
    512mb samsung 400mhz ram
    seagate barracuda sata 150 raid 0
    pci modem card
    thermaltake xaser2 case
    any suggestions would be greatly appreciated
    kev

    essentially I am not just concerned about it's current inability to overclock. but more in the fact that b4 the repiar of the board I was able to overclock with no difficulty and no special considerations. in fact when I look at my little log of bios settings the agp clock was set at 66.6/33.3 after all the overclocking. and now with EXACTLY the same components( ati card repalced but physically identical)  none of those same settings work. did the failure damage other components whose failure is not yet critical path or has the bios upgrade caused instability?

  • Error 2324 when installing new version

    Got the following error when installing new version.
    The installer has encountered an unexpected error. This may indicate a problem with this package. The error code is 2324                   
    Also Tried to uninstall after this so I could install from scratch but that failed too. Now, iTunes is in a complete mess where I cannot use, uninstall or install.
    No idea what to do now.

    Greetings stain3565,
    If you are having an issue with installing an update for iTunes for Windows, I would suggest that you troubleshoot using the steps in this article - 
    If you can't install or update iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • Problems with iwork09 opening on my new macbookair

    I have a problem with opening iwork09 on my new mac book air. I didnt purchase it online, i had the installing CD and it worked great on my old mac, now I moved it from the old one to the new one and even after the update, when I try to open the pages or numbers, the window pops up saying what you can see on the pic.. any suggestions?
    Thanks,m

    What version is Pages now?
    The latest version is 4.3
    And how did you transfer iWork from the old to the new Mac? Migration Assistant does not do a good job of transfering the iWork Apps.
    You need to install from scratch and update that.
    Peter

Maybe you are looking for