Problem with putting shadow on text over another object

Hi!
See the attached file on the following link https://dl.dropboxusercontent.com/u/21034413/TEST_PROBLEM.indd.
I try to give a outer glow effect on text that goes over a white rectangle; in the real case it's an image with a white background. As you can see, the shadow effect does not apply on the parts going over the rectangle. I can't find out which configuration it is that influences this.
Thanks in advance and best wishes,
Max

I believe the problem here is that the rectangle is filled with the [Paper] swatch. The outer glow you've applied to the text uses the Screen blending mode and will only show against a darker background or no background at all.

Similar Messages

Problem with putting music onto my iPod

Hi,
Recently I,ve been having problems with putting music on my iPod. Anytime I click to sync my iPod so I can put new songs onto it the songs never show up. Plus all the playlists in the playlist section on my iPod are all repeated over and over again(theres more than one). Theres no problem with my USB ports as I,ve tested them with other MP3 players and theres also nothing wrong with my cable as it shows up on my PC as connected. I,ve also resetted it! I just don't understand whats wrong with it I also have it fully charged when I'm trying to put the songs onto it.
Can anyone help please?!!!

" Anytime I click to sync my iPod so I can put new songs onto it the songs never show up."
This Apple knowledge-base article may help address that issue.
Windows confuses iPod with network drive.

Many problems with the 'Export to Text' (.txt) in CR Xi

Hi,
I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
- Multi-columns layout do not export as Multi-column (export only a one column);
- Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
- Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
- Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
- 'Keep Group Together' flag is not working.
- 'Reset Page Number After' simply does not works when exported to text;
- 'Keep object together' on TextBox/Section is not working.
- Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
If still supported, when will these bugs be fixed???
Thanks

Hi Rene
Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
Regards
Sourashree

Problems with downloading pics from text?

Hi - is anyone else having problems downloading pics attached to text after running the 4.1.2 upgrade?
I've tried powering on and off - turning off wi-fi and just having data...(and vice versa)...to no avail. the text and pictures are coming from another verizon user....they have a "non-smart" phone.

Have you performed a System Cache wipe since the JB update? I would try it, it will not wipe your phone, you will not lose anything. If you are going to do this, make sure you follow the instructions exactly, as failure to do that could wipe the phone by accident.
Turn the phone off and perform Clear Partition. Clearing the partition will remove any temporary files that may be causing the problem, but will not delete your files or settings.
- Power the phone down.
- Hold the volume up and down and power key down all at the same time until you see the Boot Mode Selection Menu. This should happen within a couple of seconds.
- Press the volume down key until "Recovery" is highlighted. Press the volume up key to select.
- Wait until you see a triangle with an exclamation point in it.
- Press and hold the volume down key. While doing that, press and hold the volume up key then release them. This should put you into the Android system recovery.
- Press the volume down key until wipe cache partition is highlighted.
- Press the power button to select. You will be brought back to the Android system recovery utility when it is complete.
- Press the power button to select "reboot system now". Wait for the phone to boot.
Check to see if it cleared the problem. This fixed a couple of app issues with my RAZR after the update.

Problems with the selection of text or objects

dear fireworks community!
unfortunately i have problems with my running version fireworks (CS6) and i can't find any solution or even get help via the customer support.
i can't switch between objects with a click, when i've choosen one already. i also can't cancel the entire selection. the only way (to select a new item) is to click on an empty space, hold it and pull the selection over a new item.
another thing is that i cant select a textfield with a doubleclick or switch beteween choosen tools within the usage of a shortcut …
what i already tried:
updating, deinstalling, re-storing preferences, "cleaning" the libraries, installing (this entire scenario for at least three times)
i hope someone of you can help me!
thanks in advance!

incredible!
thank you so much!

Problem with focus and selecting text in jtextfield

I have problem with jtexfield. I know that solution will be very simple but I can't figure it out.
This is simplified version of situation:
I have a jframe, jtextfield and jbutton. User can put numbers (0-10000) separated with commas to textfield and save those numbers by pressing jbutton.
When jbutton is pressed I have a validator which checks that jtextfield contains only numbers and commas. If validator sees that there are invalid characters, a messagebox is launched which tells to user whats wrong.
Now comes the tricky part.
When user presses ok from messagebox, jtextfield should select the character which validator said was invalid so that user can replace it by pressing a number or comma.
I have the invalid character, but how can you get the focus to jtextfield and select only the character which was invalid?
I tried requestFocus(), but it selected whole text in jtextfield and after that command I couldn't set selected text. I tried with commands setSelectionStart(int), setSelectionEnd(int) and select(int,int).
Then I tried to use Caret and select text with that. It selected the character I wanted, but the focus wasn't really there because it didn't have keyFocus (or something like that).
Is there a simple way of doing this?

textField.requestFocusInWindow();
textField.select(...);The above should work, although read the API on the select(...) method for the newer recommended approach on how to do selection.
If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)",
see http://homepage1.nifty.com/algafield/sscce.html,
that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
Don't forget to use the "Code Formatting Tags",
see http://forum.java.sun.com/help.jspa?sec=formatting,
so the posted code retains its original formatting.

Problem with tabs in xml text

I have a problem with my XML setup here
i use Tab key to aligh up info in the xml text for aligned
display in the program
hoever i tested on several computers and get different
resolts.
how can i fix this.
Please view the linked Image
http://img129.imageshack.us/img129/8394/flashtextproblemti4.jpg
this is what happenes even thow all run xp and all run same
latest flash version.
Anyone got an ideer how i can solve this.
BTW the font is verdana.
This is my actionscript ....
// Function to parse an address
f_parseAddress = function () {
// Set the text
_root.stageholder.textfield.htmlText =
this.firstChild.firstChild.firstChild.nodeValue;
// Create the XML object
XML_address = new XML();
// Set up the XML object
XML_address.ignoreWhite = true;
// Add the handlers
XML_address.onLoad = f_parseAddress;
// Load the XML file
XML_address.load("./Data/xml/kontakt.xml");
This is my XML file
<?xml version="1.0" encoding="iso-8859-1"?>
<text>
<address>
<![CDATA[
Company name
Company name
address
address
Dir. tlf. + xx xx xx xx xx
+ xx xx xx xx xx
Mobil + xx xx xx xx xx
+ xx xx xx xx xx
web: <a href="
http://www.xxxxxxxxxxxxx.xx">www.xxxxxxxxxxxxx.xx</a>
E-mail: <a
href="mailto:[email protected]">[email protected]</a>
]]>
</address>
</text>
If anyone got a solution on how i can get my text to allign
corect
i would like to hear about it
Best reguards
Mis

alrighty then try this xml structure.
Note: formatting information like b, or linkage tags should
not be part of the xml.
The XML format is a universal format for data, if you fill it
with style information this is not good practive (in general, there
are of course scenarios where it makes sense, also since (x)html IS
also XML).
In your case you want to put the information about multiple
companies in a xml file, but you let the flash decide how to
display format this information.
so if you use the sugested XMl structure you will have full
control of the layout within flash, because you can grab every
piece of information from the xml and place it jsut where you want
in flash and format it within flash.
Of course this process is more coding work than your previous
attempt, but it pays of when you have a lot of data to process and
when you want to have full control of the final layout.
But maybe its overkill for your application (I don't know how
many companies will be stored in your xml and how complex the rest
of the app is).

HT4623 is anyone else having problems with receiving and sending text messages. most people in my contacts are not getting messages that i send to them.

is anyone else experiencing problems with (SMS) text messaging. Most all of my daily contacts dont receive my messages.

Make sure you have checked off iCloud contacts in your Contacts app under Groups in upper left corner.

Problem with unicode in MIME text/html

Hi;
I have a java program that sends email by sending it to our exchange server using SMTP. The email has both a To and a Bcc in the single email sent.
The bcc addressee receives the email fine.
The to address however has a problem with chars that are > 0x7f in the html. The html uses utf-8. But the displayed characters look as though the utf-8 part was ignored.
Also weird, if I go to view, options in Outlook for the bcc email (which is good) it shows:
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="----=_Part_0_32437168.1135634913407"
Return-Path: [email protected]
X-OriginalArrivalTime: 26 Dec 2005 22:08:33.0366 (UTC) FILETIME=[E94D1F60:01C60A68]
------=_Part_0_32437168.1135634913407
Content-Type: text/plain; charset=Cp1252
Content-Transfer-Encoding: quoted-printable
------=_Part_0_32437168.1135634913407
Content-Type: text/html; charset=Cp1252
Content-Transfer-Encoding: quoted-printable
------=_Part_0_32437168.1135634913407--
But for the to email (which has the problem), it only shows:
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="----=_Part_0_32437168.1135634913407"
Return-Path: [email protected]
X-OriginalArrivalTime: 26 Dec 2005 22:08:33.0366 (UTC) FILETIME=[E94D1F60:01C60A68]
Does javamail do anything weird when it gets an email with a to and a bcc and split it up wrong? I just download and installed the latest mail.jar and activation.jar.
thanks - dave

OK...this didnt quite cure it for me...but having done this AND then this...
MimeBodyPart htmlText = new MimeBodyPart();
final String htmlStuff = "<?xml version=\"1.0\" encoding=\"utf-8\"?>"
+ "<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.0 Strict//EN\" \"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd\">"
+ "<html xmlns=\"http://www.w3.org/1999/xhtml\" xml:lang=\"en\" lang=\"en\">"
+ "<head>"
+ "<title>Stuff.</title>"
+ "<meta http-equiv=\"Content-Type\" content=\"application/xhtml+xml; charset=utf-8\"/>"
+ "</head><body>"
+ "Currency Symbols: \u00A3\u00A2\u20A3\u20AC$"
+ "</body></html>";
DataSource htmlSource = new DataSource()
private String stuff = htmlStuff;
private Charset cset = Charset.forName("utf-8");
public String getContentType() { return "text/html"; };
public java.io.InputStream getInputStream() throws IOException
return new ByteArrayInputStream(cset.encode(stuff).array());
public String getName()
return null;
public OutputStream getOutputStream() throws IOException
throw new IOException();
htmlText.setDataHandler(new DataHandler(htmlSource));
htmlText.addHeader("Content-Transfer-Encoding","base64");
This works for me as shown by the Unicode chars in the html.
If you intend to take this to production create a decent external DataHandler class and avoid the use of the anonymous class - which then avoids the need for the final String and the string can come from anywhere then.
Hope this helps,
Barry

2.1: problem with Highlights & Shadows

The 2.1 update is amazing. But there seems to be a pretty serious problem with the H&S brick: pushing the Mid Contrast slider too high now results in what looks like solarized blacks. Here's an example: http://homepage.mac.com/leary/Bug/large-1.html
Obviously this is pushed way too high, but the problem is apparent even at lower values and is new to 2.1.
This is from a RAW D40 file but the problem is the same on D80 and D300.
Anyone else seeing this?

Also, with proper use of the recovery and black point sliders, I'd think it would be pretty rare to really crank those "Advanced" values.
There's a creative side to this brick that I find goes beyond simple recovery. I admit to using it less now that we have the definition slider, but it still allows for a certain "look" that I can't get with the other controls. For that, I use the advanced settings a lot and this is a problem that is entirely new to 2.1.
The problem seems to only be dependent on the Mid slider - the amount in the Shadow slider doesn't seem to matter at all. Even at 1.0 on the Shadow slider, pushing Mid C creates this effect.
Obviously going back to Black Point Comp can alleviate the problem, but there's a limit that didn't exist before.
I just noticed that playing with Radius affects it as well. Of course all of this is tied to the black levels in the picture but again, it didn't used to be this way.

Problem with italicizing/underlining/bolding text

When I'm typing notes, press enter and attempt to start a new line with italicized/underlined/bolded text, it's very unreliable. Sometimes it works, most times it does not. The format tab in the bar at the top will briefly flash blue, but nothing happens. I've dealt with the same problem in Pages, and in both iWork '09 and the latest version. I always wind up having to type some text first, then go back and do whatever I want with the formatting, which is a significant waste of time and a major annoyance. Am I doing something wrong or is this just a case of terrible software design on Apple's part?

MX6.0 or 6.1?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"anglefish" <[email protected]> wrote in
message
news:gqjj44$l98$[email protected]..
> Pulling my hair out stage - I have installed Dreamweaver
Mx on my vista
> laptop
> and created a website but all the text has an underline
which I am unable
> to
> get rid of. The underline option is not selected it just
appears. Is this
> a
> compatibility problem. Any help would be much
appreciated.
>

Problem with inverted commas in texts in WAD

Hi all,
I've a problem with description texts in WAD. In a graph where one of the columns have the description, let's say something like ' bla"bla ' (in Hebrew we've texts with inverted commas in the middle of the word) and when I point with my mouse on the point to see the value in numbers the text is cut. let's say 'bla"bla' had 15 value it wouldn't show it, but it would show 'bla'. if the text is ' bla ' with value 18, it shows ' bla 18' .
How can i solve it?
thank you,
Yoav.

Hi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André

Problems with displaying dynamic Arabic text

We have a problem with a navigation system we are building
which has to be able to display dynamic Arabic text. We are pulling
in the Arabic text using XML. The problem we are having is that the
character are not displaying joined up where they should be (for
instance in the middle of words). Arabic characters have different
shaping according to the position they take up within a word. What
we are producing is apparently unreadable. Has anyone come accross
this problem before? Is it solveable?

Hi:
Is there any possible chance that Adobe would do something to asist us Fl8 users with international character support.
Everyone has some work-around, except Abode, and they are all usually related to XML.
My setup is PHP (CMS supporting many languages) -> MySQL -> PHP -> Flash8 (Dynamic Text Fields) and the olpart that does not work is when I inject an extended character into the string - Flash stops displaying anything from that character on.
If Adobe has or did have some component / solution or anything other than the usual System.useCodePage = true (which never seems to actually work), please let me know.
Best Regards,

Problem with After effects present text animations

When I want to use the text animation presets I get an error message, an example is when I want to use a text "animate in" preset and got the following error message: After Effects error: Can't import file "Fly In From Bottom.ffx": unsupported filetype or extension. ( 0 :: 1 ). I have check my bridge script settings and they are activated for After effects.

Sounds like you are trying to import a FFX file instead of applying an animation preset. Some users are reporting problems with Bridge. Just type the name of the animation preset into the Effects and Presets panel and apply it from inside AE.

Problem with Put Key Command

Hi everyone
I'm woking on Gem Xpresso card which support scp 02.
I can Authenticate successfully and Install and load my applet on it. but I have problem in put key command.
my first key set is:
47454d5850524553534f53414d504c45
and this is the key that I want to set as my new key:
404142434445464748494a4b4c4d4e4f
with the algorithm that I use the encrypt value of this key will be :
33173C8ECDA55BDF7E50625531BE4FC5
and its check value will be :
8BAF47
so this is the APDU that I send for Put Key command:
80D800814301811033173C8ECDA55BDF7E50625531BE4FC5038BAF47811033173C8ECDA55BDF7E50625531BE4FC5038BAF47811033173C8ECDA55BDF7E50625531BE4FC5038BAF47
but I recieve error 94 85 (invalid check value)
do I calculate my check value wrong?
does different versions of jcdk or different versions of globalplatform hav different ways for calculating check value and keys encrypted values?
I'll appreciate any help
Best Regards,
Shilan

Try visit Gemplus forum or mailing-list.

Problem with putting shadow on text over another object

Similar Messages

Maybe you are looking for