Problem with Pxe on IBM ThinkCenter

I am having a problem getting Zen 7 Imaging to work on IBm ThinkCenter 6072
desktops. I receive an ip address and going through the process seems to
work up until it actually goes into the Zen bash prompt to start the
program. The error reads "no network device found. Load network module
first". We run Zen 7 sp1 ir2 on a NW6.5 sp5 server. My ultimate goal is to
be able to run multcast image operations on the new IBM machines we just got
in.
Mike

Most of the new ibms, laptops and desktop will not pxe boot. Any
thoughts????
"Mberg" <[email protected]> wrote in message
news:mJbHj.933$[email protected]..
> One more thing. These machines will pxe boot with a bootcd and allow me to
> image.
>
>
> "Mberg" <[email protected]> wrote in message
> news:lIbHj.931$[email protected]..
>>I am having a problem getting Zen 7 Imaging to work on IBm ThinkCenter
>>6072 desktops. I receive an ip address and going through the process seems
>>to work up until it actually goes into the Zen bash prompt to start the
>>program. The error reads "no network device found. Load network module
>>first". We run Zen 7 sp1 ir2 on a NW6.5 sp5 server. My ultimate goal is to
>>be able to run multcast image operations on the new IBM machines we just
>>got in.
>>
>> Mike
>>
>
>

Similar Messages

Problem With PXE Across Subnets

I'm having a problem with PXE across subnets. The workstation boots,
finds the dhcp server, finds the tftp server, downloads linux.1 and
linux.2 with no problem. It is unable to download linux3.tgz, however.
I've tried two different zen servers. I can tftp the file from either
zen server in windows with no problem. I can tftp it from maintenance
mode if I use a workstation as a tftp server. I can tftp it in PXE on
the same subnet with no problems.
A packet trace on the workstation shows that it gets so far into the
download and then begins getting ICMP 'destination unreacable' packets
from the server with the 'port unreachable' flag set.
It sounds as if the server is closing the conversation on that port.
Can anyone shed any light on this for me?
Dave Thomas
Rivercrest Technologies, Inc.

Could you send me that trace? I would like to have a quick look
Ron
[email protected]
<[email protected]> wrote in message
news:iNOie.234$[email protected]..
> The source address is the zen server. I'm relatively certain there is
> not routing issue because I can tftp the file from windows with no issues
> etc. Also there are a lot of other services crossing the subnets that
> would fail if there is a routing issue.
>
> The 'port unreachable' flag seems to indicate that the zen server has
> stopped listening on the port that is being used for the transfer.
>
> Dave Thomas
>
> > Where do these ICMP "destination unreacable" come from? could there be a
> > routing issue to get to the imaging server?
> >
> > Ron
> >
> > <[email protected]> wrote in message
> > news:[email protected] oups.com...
> > > I'm having a problem with PXE across subnets. The workstation boots,
> > > finds the dhcp server, finds the tftp server, downloads linux.1 and
> > > linux.2 with no problem. It is unable to download linux3.tgz,
> however.
> > >
> > >
> > > I've tried two different zen servers. I can tftp the file from either
> > > zen server in windows with no problem. I can tftp it from maintenance
> > > mode if I use a workstation as a tftp server. I can tftp it in PXE on
> > > the same subnet with no problems.
> > >
> > > A packet trace on the workstation shows that it gets so far into the
> > > download and then begins getting ICMP 'destination unreacable' packets
> > > from the server with the 'port unreachable' flag set.
> > >
> > > It sounds as if the server is closing the conversation on that port.
> > >
> > > Can anyone shed any light on this for me?
> > >
> > > Dave Thomas
> > > Rivercrest Technologies, Inc.
> > >
> >
> >
>

Problem with PXE install of T500

At my firm we have got a T500 for test and we are trying to make it run with our PXE environment.
We run PXE boot with Dos, and get a failure upon unattended installation of XP, something like "The Installation has run out of memory, and can not continue" roughly translated from danish.
We already have about 12 different machines in our setup, like T43, T60, T61 and they all run flawlessly in our setup. However this T500 kills the installation right after copying files to the partitioned harddrive.
We had this problem before and had to trim down bios functions to get enough memory free for the installation. But what can we trim on the bios of the T500? (type 2241-CTO)
Hope to get a fast reply
Kind regards
//Cosmodk

Disable Intel ATM from bios. This should free some memory.
Also fixes so issues with altiris pxe server if you are using it?

Problems with PXE boot for clients

Hi,
I have an environment where I have clients on av VLAN connected to a Cisco 2960X (WS-C2960X-48LPD-L ) with layer 3 configuration. The clients do a PXE boot to get configuration. The thing is that this does not work on all switches. The switches have the exact same configuration, the only thing that differs is Hardware Board Revision Number. (That I can find..) The ones that works has 0x05 and the ones that doesn´t work has 0x12. The PXE server is connected on a different VLAN in the same switch.
I have configured spanning-tree portfast on the interfaces. I have ip-helper on the VLAN. The PXE server is also the DHCP server.
Any suggestions?
Regards,
Carina

It seems NIC teaming was configured really incorrectly in this case. Different switches require different configuration with specific settings on the Windows Server side. Sometimes incorrect configurations work when network traffic is low but start behaving
funny when it increases. The reason behind this is Windows hosts sending back answers to its peers via different physical links, and the switch doesn't expect it and drops "incorrect" frames.
You can find detailed description of different teaming modes here:
http://www.aidanfinn.com/?p=14004
If you use LACP, be sure to set up port channel on Cisco switches or LACP trunk on HP switches. Otherwise you might want to use the Switch Independent mode.
Evgeniy Lotosh
MCSE: Server infractructire, MCSE: Messaging

Problems with *.zmg Image deploy via PXE

Hi all,
I am currently faced with the following problem unfortunately:
We use ZCM pre boot (pxe) to image our clients with a windows7.zmg image which was configured with sysprep.
The image is created on a PC, which has a 300GB HDD. The windows partition is over the total size of the hdd.
This imaging process on a new pc is as following script shows:
Code:
# Delete + MBR partition table
dd if = /dev/zero of=/dev/sda bs=512 count=1
# partition
fdisk /dev/sda << EOF
w
EOF
# imaging
img rp server IP path/to/image.zmg
This works quite well so far, with the only problem, that the partition on the new PC has the maximum of 300 GB. So if I image this image on a pc, which hdd has 500 GB, 200 GB will remain unpartitioned.
I have redesigned the imaging now follows:
Code:
# imaging
img pc1 NTFS
img rp server IP path/to/image.zmg a1: p1
img pa1
Now the entire HDD is used for the partition, but after the imaging the PC doesn`t boot, and stops with a black screen and a blinking cursor.
I am typing this on a problem with the mbr, but does not know how to fix it: (
I have to modify the imaging-process, that i can use the image on every HDD size with the result, that always the max partitionsize is used.

hi all, i am having an issue where found out that Imaging Script cannot be used to multicast so i am running in to a problem now. If i push out an image via zcm script bundle it works fine with your suggestions but i cannot seem to figure out why the image wipes out all the hard drives in the systems during multicast image set or a single image load via pxe boot.
First problem:
if i push out an image via Zenworks Image preboot bundle file set is set to 1 it wipes out all the hardrvie in the system (tow hard drive, disk 0 and disk 1. i can certainly fix the disk resizing issue by adding a script to unattaned file after the image is loaded to resize the disk automatically using diskpart commands. which works fine.
Second problem:
here is what i did:
1. created an multicast Image Set
2. number of clients needed set to 1
3. Time out in five minutes
It does not load the image znd waits for session to start.
how can i automate this via zcm to make sure on pxe boot the both pcs receive the image as scheduled in zcm.
Please assist.
thank you.

Microphone problems with IBM ViaVoice OS X 10.4.6

Hello,
I use a dictation program called IBM ViaVoice for medical dictation. It uses a USB mic called Andrea.
All was working fine until I upgraded to OS X 10.4.6 from 10.4.5 over the weekend, and come Monday AM, when I go to use the program it states "microphone is being used exclusively by another application", and no longer works in the app.
There's nothing wrong with the mic itself, and it checks out in the sound control panel
This is an older app. that IBM no longer directly supports. It still continues to be marketed and supported by a third party company. They "officially"don't support the product past OS X 10.2
I've tried changing configs. in the Sound and Speech control panels to no avail.
I "archived and restored" back to OS X 10.4.5 and it works fine again.
I have the same problem with a new Intel MacBook Pro (OS X 10.4.6) and thought it had to do with the the new architecture, but when this happened to the older powerbook, after the upgrade, obviously it's the software.
Anyone have an idea for a work around? I'd like to continue to upgrade my system and this program is a must for work.
Thanks in advance for any help
Nick Stratton

Nick,
You might want to have a look at my post:
http://discussions.apple.com/thread.jspa?threadID=431700&start=15&tstart=0
As we all know, ViaVoice is a rather quirky piece of software. For unknown reasons, reinstalls often seems to do miracles. But DO NOT FORGET to backup your "temp" and "user" files BEFORE YOU REINSTALL! And be sure to install the patch to version 10.2 (available on Nuance's site).
If you do a lot of dictating, you might also want to consider using a microphone set-up like the one I recommend in the thread mentioned above. I think it improves accuracy and it certainly frees me from the "can't find the microphone" and similar problems I had with my USB microphone. BUT … don't throw away that Andreas line-in to USB converter!! As I said, ViaVoice is quirky software. There are some situations (like creating a new voice model, if my recollection is correct) where VV insists on connection to a USB microphone. If you don't have one handy, you're out of luck. That's why that USB converter can be a godsend, even years after you've written it off to the cobwebbed corners of the basement.
Powerbook 17" 1.33 GHz Mac OS X (10.4.7)

Events problem with (Java and ActiveX)

Hi,
I use an ActiveX component with Java and i've got a problem with events.
Java classes were generated with Bridge2Java (IBM).
In order to manage events I added a listener in my application :
javaMyActiveX = new MyActiveX();
javaMyActiveX.add_DMyActiveXEventsListener(new _DMyActiveXEventsAdapter());
I also added a constructor in the _DMyActiveXEventsAdapter class and I fill the body of methods.
The ActiveX generates two types of events :
- The ones are directly generated by methods.
- The others are generated by a thread.
With MS Products (VB, Visual C++, Visual J++), I catch all events.
With java (jdk 1.4), I catch only events generated by methods.
Can anyone help me.

I'm not 100% sure, but the last time I used that bridge, it only worked if you ran your Java app within a Microsoft VM.

Problem with installing CUCM on MCS-7816-I5

Hi to all.
I have a problem with installing CUCM 8.6.1 on new MCS-7816-I5 (IBM) hardware. The problem is that installation loops in restart after upgrading MCS firmware. Actualy, installation does not sucessfully upgrade firmware, so every time it detects old firmware and trying to upgrade it.
I also tried update MCS firmware with downloaded Firmware Update Utility 3.6.5 CD from Cisco downloads, but it also fails.
Does anyone have idea what's going on? Is this a Cisco failure or IBM server failure?
Here is some details from log file generated with this Firmware Update Utility 3.6.5:
==============
Initial Selection
Machine Type: 4251 OS: SLES 10 Arch: 64 bit
IsPartition: 0
Update:   IBM System x uEFI update for x3200 M3 /3250 M3
Severity: Critical
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_uefi_gye142a_linux_32-64 Requisite:None
Version: 1.08 (GYE142A)
Install: 1.06 (GYE135A)
Select:    Yes
Update:   IBM Dynamic System Analysis
Severity: Recommended
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_dsa_3.20_dsyt75x_linux_32_64
Requisite:None
Version: 3.20 (DSYT75X)
Install: 3.01 (DSYT60K)
Select:    Yes
Update:   IBM Online SAS/SATA Hard Disk Drive Update Program
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_hdd_sas-1.08.01_linux_32-64
Requisite:None
Name:     WD2502ABYS-23B7A0 (/dev/sg0)
Version: 02.03B07
Install: 02.0
Select:    Yes
Update:   Integrated Management Module Update
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_imm_yuoo84c_linux_32-64 Requisite:None
Version: 1.22 (YUOO84C)
Install: 1.10 (YUOO57H)
Select:    Yes
IBM Command Line IMM Flash Update Utility v1.05.03 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
LAN-over-USB device not configured.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 3
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
(C) Copyright IBM Corp.2010. All Rights Reserved.
FdrvWL -- Flash Drive(s)                                     3.10.08.19
   1 Ada:0 SID:0   PN:44E9172:42C0463 SN:1J242783 FW:02.03B07              T:13 FW:Ok
AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
0(onBoard)           1       0   0    0          0
                       1       0   0    0          0 Error(s)
Update completed successfully. <-- THIS SUCCESS, BUT EVERY TIME IT UPGRADEING AGAIN FROM OLD VERSION, LIKE NEVER REALY UPGRADED TO NEWER VERSION
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
===========================
Thanks,
Sinisa.

Hi Sinisa,
It almost sounds like this bug;
CSCtn81201
Incorrect "Hardware Configuration Error" due to hardware setup errors
Symptom:
Refresh upgrade stops with IMM device detection, and then server being reported as unsupported
Conditions:
in-band USB interface was disabled, which is configurable via IBM system X or IMM (browser) interfaces.
Workaround:
change the in-band usb interface settings to enabled.
Related Bug
Status
Fixed
Severity
4 - minor
Last Modified
Aug 17,2011
Product
Cisco Unified Communications Manager (CallManager)
Platform
Dependent
Technology
nav
1st Found-in
8.6(0.99081.3)
Fixed-in
8.6(1.96000.1), 9.0(0.95070.38), 9.0(0.95070.39), 8.6(1.99989.1), 8.6(1.95050.1), 9.0(0.96000.1), 8.6(1.97011.2), 8.6(1.95190.40), 8.6(1.97011.1), 8.6(0.95180.9), 9.0(0.95010.1), 8.6(1.95020.1), 8.6(1.95040.1), 8.6(0.98000.50), 8.6(0.98000.17), 8.6(0.99981.2), 8.6(1.10000.1), 8.6(1.99986.1), 8.6(1.95020.58), 8.6(1.96000.51), 8.6(1.10000.43)
Cheers!
Rob

Problem with SLD and Creation of JCo

Hello everyone!
I have a problem with the SLD and the Creation of JCo on the Portal, in trying to create the JCo always tells me that the name used there in the SLD, being that the facility is new.
Who performs the installation, set in the SLD the ECC 6 PRD, delete it to see if I could create a JCo but still the error again when creating the ECC 6 PRD in the SLD I said that already exists and can not create it.
I found a forum which recommended re-import the cimsap .... .... zip and zip CR_Content which would clean everything, I managed to import the zip cimsap ... but in trying to raise CR_Content gives me the following message "All incremental updates of the selected aggregate import for export SAP_CR line have already been loaded before. You require a newer import to update your current content SAP_CR version 4.11." .
I recommend, do the installation again, reload the cimsap.zip and CR_Content.zip a copy homogeneous.
from already thank you very much
Text of error to create JCo destination
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
    at at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
    at at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionGoForward(ButtonBar.java:505)
    at at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:280)
    at at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    ... 28 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; InfoPath.1)
Version null
DOM version null
Client Type msie7
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0017.20081210091801.0000 (release=NW04S_17_REL, buildtime=2009-01-12:09:43:27[UTC], changelist=52884, host=pwdfm114), build date: Tue Apr 28 19:28:39 CLT 2009
J2EE Engine 7.00 patchlevel 48199.450
Java VM IBM J9SE VM, version:2.2, vendor: IBM Corporation
Operating system Linux, version: 2.6.18-92.el5, architecture: amd64
Session & Other
Session Locale en
Time of Failure Fri Aug 28 11:43:53 CLT 2009 (Java Time: 1251474233677)
Web Dynpro Code Generation Infos
sap.com/tcwdtools
No information available null
sap.com/tcwddispwda
No information available null
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
java.lang.NullPointerException
     at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
     at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
     at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionGoForward(ButtonBar.java:505)
     at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:280)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:207)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

Hello!!
The "SLD" with which I am working up to Portal, the "ECC" installs itself as "ABAP.
Who did the installation and initial configuration, do not leave any documentation about it.
Now I need to create the systems and "JCo" necessary to enable them to implement the "ESS", but errors are presented above.
Some days ago I managed to update the CR_Content, which allowed me to create the "JCo" but at the time of the test, says' com.sap.mw.jco.JCO $ Exception: (103) RFC_ERROR_LOGON_FAILURE "name or password incorrect .
I managed to also create the portal systems, "System Administration -> System Configuration -> Content Portal" and to test it fails on "Test Connection with Connector", which as noted is associated with the connectors "JCo".
For the creation of the system, I think I should create something in the Visual Administrator ", but within the documentation that I do not see anything about it.
thanks for your help!

Anyone having a problem with links in Safari after upgrading?

okay, Before the upgrade to os5, we were able to go to the website to get the e-edition of our local paper. The way their website is designed you first see part of the first page and then there is a link to take you to the full page. Everything worked just fine. Then after the upgrade, last Saturday, i am able to get the first part of the page, but when I click on the link to access the full page it goes to a blank page -about:blank. I do have safari on my laptop (an ibm) and the link works fine there. Is it a problem with Safari, the settings on my ipad or what? Please help?

Is your problem with iMovie as the title suggests or with iDVD?

Problem with streaming video

Hi!
I have a problem with my project. Please help me!
I tried to send a video streaming between 2 computers. I used socket connection and AVReceive2, AVTransmit. When received computer display 59 seconds, it stop the connection, socket is closed and program send a error report.
I list here:
=========================================================================
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x070b17ff, pid=1180, tid=2176
# Java VM: Java HotSpot(TM) Client VM (1.5.0_13-b05 mixed mode, sharing)
# Problematic frame:
# C [jmmpegv.dll+0x17ff]
--------------- T H R E A D ---------------
Current thread (0x02cdf930): JavaThread "Loop thread: com.sun.media.parser.RawBufferParser$FrameTrack@27391d" daemon [_thread_in_native, id=2176]
siginfo: ExceptionCode=0xc0000005, reading address 0x0d2451f8
Registers:
EAX=0x0000008e, EBX=0xfffffffd, ECX=0x070c2a68, EDX=0x0000ffff
ESP=0x078ff8a4, EBP=0x0000000d, ESI=0x016c0000, EDI=0x077451f8
EIP=0x070b17ff, EFLAGS=0x00010202
Top of Stack: (sp=0x078ff8a4)
0x078ff8a4: 00000001 00000164 07110650 00000000
0x078ff8b4: 00000005 0000010f 070c2a34 00000003
0x078ff8c4: 00000003 070b65c8 070c250f 070c2b3c
0x078ff8d4: 07740048 00000002 00000000 00000000
0x078ff8e4: 00000000 00000000 070b66c0 07740048
0x078ff8f4: 07740048 070b6c3b 00000001 07740048
0x078ff904: 071101a0 07740048 078ff990 00000000
0x078ff914: 00000000 070b74b5 07740048 078ff97c
Instructions: (pc=0x070b17ff)
0x070b17ef: fc 01 0c 07 0b d7 8b 3d c0 2d 0c 07 c1 fe 03 45
0x070b17ff: d9 04 b7 8b 35 44 36 0c 07 8b f9 d8 0c 86 d9 1c
Stack: [0x078c0000,0x07900000), sp=0x078ff8a4, free space=254k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [jmmpegv.dll+0x17ff]
[error occurred during error reporting, step 120, id 0xc0000005]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j com.ibm.media.codec.video.mpeg.MpegVideo.videoDecode(J[BIIILjava/lang/Object;JII[I[I[I[I[I[I)I+0
j com.ibm.media.codec.video.mpeg.MpegVideo.process(Ljavax/media/Buffer;Ljavax/media/Buffer;)I+574
J com.sun.media.BasicFilterModule.process()V
J com.sun.media.BasicOutputConnector.writeReport()V
J com.sun.media.BasicFilterModule.process()V
J com.sun.media.BasicOutputConnector.writeReport()V
J com.sun.media.SourceThread.process()Z
j com.sun.media.util.LoopThread.run()V+14
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x02cdd008 JavaThread "Loop thread: com.sun.media.parser.RawBufferParser$FrameTrack@cec0c5" daemon [_thread_blocked, id=3104]
0x02d1df88 JavaThread "Loop thread: com.sun.media.renderer.audio.DirectAudioRenderer@2ce908" daemon [_thread_blocked, id=1176]
=>0x02cdf930 JavaThread "Loop thread: com.sun.media.parser.RawBufferParser$FrameTrack@27391d" daemon [_thread_in_native, id=2176]
0x02ce0890 JavaThread "Loop thread: com.sun.media.renderer.video.DDRenderer@14a8cd1" daemon [_thread_blocked, id=2296]
0x02c5e920 JavaThread "Progress Slider thread" daemon [_thread_blocked, id=3172]
0x02d18c58 JavaThread "Loop thread" daemon [_thread_blocked, id=2920]
0x00ab5a50 JavaThread "DirectSound Request Thread" daemon [_thread_blocked, id=3984]
0x00a80480 JavaThread "Progress Slider thread" daemon [_thread_blocked, id=3180]
0x02c89d18 JavaThread "Loop thread" daemon [_thread_blocked, id=788]
0x02d37098 JavaThread "JMF thread: SendEventQueue: com.sun.media.PlaybackEngine" daemon [_thread_blocked, id=3328]
0x02c8bc28 JavaThread "JMF thread: SendEventQueue: com.sun.media.content.unknown.Handler" daemon [_thread_blocked, id=2916]
0x02c78720 JavaThread "RTPStream" daemon [_thread_blocked, id=3400]
0x02db1d90 JavaThread "JMF thread: SendEventQueue: com.sun.media.PlaybackEngine" daemon [_thread_blocked, id=3032]
0x02c73c10 JavaThread "JMF thread: SendEventQueue: com.sun.media.content.unknown.Handler" daemon [_thread_blocked, id=1440]
0x02c7d930 JavaThread "RTPStream" daemon [_thread_blocked, id=2664]
0x02d195e0 JavaThread "RTCP Reporter" daemon [_thread_blocked, id=2416]
0x02d19008 JavaThread "SSRC Cache Cleaner" daemon [_thread_blocked, id=592]
0x02d24a30 JavaThread "RTP Forwarder for address 192.168.1.34 port 1627" daemon [_thread_in_native, id=376]
0x02c5fa30 JavaThread "RTCP Forwarder for address192.168.1.34 port 1628" daemon [_thread_in_native, id=3840]
0x02c5f008 JavaThread "RTPEventHandler" daemon [_thread_blocked, id=2516]
0x02c60440 JavaThread "RTCP Reporter" daemon [_thread_blocked, id=2820]
0x02c602b8 JavaThread "SSRC Cache Cleaner" daemon [_thread_blocked, id=3816]
0x02d403d0 JavaThread "RTP Forwarder for address 192.168.1.34 port 1625" daemon [_thread_in_native, id=2272]
0x02d0de20 JavaThread "RTCP Forwarder for address192.168.1.34 port 1626" daemon [_thread_in_native, id=1500]
0x00a64e30 JavaThread "RTPEventHandler" daemon [_thread_blocked, id=3852]
0x02c9d6e8 JavaThread "TimerQueue" daemon [_thread_blocked, id=2472]
0x00035c78 JavaThread "DestroyJavaVM" [_thread_blocked, id=2776]
0x02cbbb10 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=364]
0x02c58478 JavaThread "AWT-Shutdown" [_thread_blocked, id=1008]
0x02c58898 JavaThread "AWT-Windows" daemon [_thread_in_native, id=3548]
0x00aabf08 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=2440]
0x00a716d0 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3644]
0x00a702b0 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3348]
0x00a6f598 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1184]
0x00a6a300 JavaThread "Finalizer" daemon [_thread_blocked, id=2556]
0x00a68e78 JavaThread "Reference Handler" daemon [_thread_blocked, id=1296]
Other Threads:
0x00a67c38 VMThread [id=1956]
0x00a6f440 WatcherThread [id=3560]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 640K, used 501K [0x22a70000, 0x22b20000, 0x22f50000)
eden space 576K, 76% used [0x22a70000, 0x22adde88, 0x22b00000)
from space 64K, 96% used [0x22b10000, 0x22b1f758, 0x22b20000)
to space 64K, 0% used [0x22b00000, 0x22b00000, 0x22b10000)
tenured generation total 8172K, used 6973K [0x22f50000, 0x2374b000, 0x26a70000)
the space 8172K, 85% used [0x22f50000, 0x2361f4e0, 0x2361f600, 0x2374b000)
compacting perm gen total 8192K, used 2098K [0x26a70000, 0x27270000, 0x2aa70000)
the space 8192K, 25% used [0x26a70000, 0x26c7ca90, 0x26c7cc00, 0x27270000)
ro space 8192K, 67% used [0x2aa70000, 0x2afd23e0, 0x2afd2400, 0x2b270000)
rw space 12288K, 47% used [0x2b270000, 0x2b81f450, 0x2b81f600, 0x2be70000)
Dynamic libraries:
0x00400000 - 0x0040d000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\java.exe
0x7c900000 - 0x7c9b0000      C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f4000      C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f01000      C:\WINDOWS\system32\RPCRT4.dll
0x77c10000 - 0x77c68000      C:\WINDOWS\system32\MSVCRT.dll
0x6d740000 - 0x6d8dd000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\client\jvm.dll
0x77d40000 - 0x77dd0000      C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f56000      C:\WINDOWS\system32\GDI32.dll
0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
0x6d300000 - 0x6d308000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\hpi.dll
0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
0x6d710000 - 0x6d71c000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\verify.dll
0x6d380000 - 0x6d39d000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\java.dll
0x6d730000 - 0x6d73f000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\zip.dll
0x6d070000 - 0x6d1da000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\awt.dll
0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
0x76390000 - 0x763ad000      C:\WINDOWS\system32\IMM32.dll
0x774e0000 - 0x7761c000      C:\WINDOWS\system32\ole32.dll
0x305e0000 - 0x305f6000      C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\miscr3.dll
0x77f60000 - 0x77fd6000      C:\WINDOWS\system32\SHLWAPI.dll
0x30480000 - 0x3048e000      C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\fssync.dll
0x78130000 - 0x781cb000      C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.42_x-ww_0de06acd\MSVCR80.dll
0x5ad70000 - 0x5ada8000      C:\WINDOWS\system32\uxtheme.dll
0x73760000 - 0x737a9000      C:\WINDOWS\system32\ddraw.dll
0x73bc0000 - 0x73bc6000      C:\WINDOWS\system32\DCIMAN32.dll
0x6d2b0000 - 0x6d300000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\fontmanager.dll
0x7c9c0000 - 0x7d1d4000      C:\WINDOWS\system32\shell32.dll
0x773d0000 - 0x774d2000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll
0x5d090000 - 0x5d127000      C:\WINDOWS\system32\comctl32.dll
0x6d540000 - 0x6d553000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\net.dll
0x71ab0000 - 0x71ac7000      C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000      C:\WINDOWS\system32\WS2HELP.dll
0x6d560000 - 0x6d569000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\nio.dll
0x60300000 - 0x60307000      C:\PROGRA~1\Yahoo!\MESSEN~1\idle.dll
0x7c340000 - 0x7c396000      C:\PROGRA~1\Yahoo!\MESSEN~1\MSVCR71.dll
0x71a50000 - 0x71a8f000      C:\WINDOWS\system32\mswsock.dll
0x662b0000 - 0x66308000      C:\WINDOWS\system32\hnetcfg.dll
0x71a90000 - 0x71a98000      C:\WINDOWS\System32\wshtcpip.dll
0x10000000 - 0x10015000      C:\WINDOWS\system32\jmutil.dll
0x76f20000 - 0x76f47000      C:\WINDOWS\system32\DNSAPI.dll
0x30460000 - 0x3047b000      C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\dnsq.dll
0x76fb0000 - 0x76fb8000      C:\WINDOWS\System32\winrnr.dll
0x76f60000 - 0x76f8c000      C:\WINDOWS\system32\WLDAP32.dll
0x76fc0000 - 0x76fc6000      C:\WINDOWS\system32\rasadhlp.dll
0x05540000 - 0x0554d000      C:\WINDOWS\system32\jmacm.dll
0x77be0000 - 0x77bf5000      C:\WINDOWS\system32\MSACM32.dll
0x58420000 - 0x58427000      C:\WINDOWS\system32\imaadp32.acm
0x72cf0000 - 0x72cf7000      C:\WINDOWS\system32\msadp32.acm
0x58330000 - 0x58335000      C:\WINDOWS\system32\msg711.acm
0x58300000 - 0x58308000      C:\WINDOWS\system32\msgsm32.acm
0x582d0000 - 0x582d4000      C:\WINDOWS\system32\tssoft32.acm
0x73b70000 - 0x73b77000      C:\WINDOWS\system32\tsd32.dll
0x58310000 - 0x5832d000      C:\WINDOWS\system32\msg723.acm
0x58340000 - 0x5838d000      C:\WINDOWS\system32\msaud32.acm
0x582e0000 - 0x582fe000      C:\WINDOWS\system32\sl_anet.acm
0x581a0000 - 0x581d9000      C:\WINDOWS\system32\iac25_32.ax
0x58390000 - 0x5841a000      C:\WINDOWS\system32\l3codeca.acm
0x056d0000 - 0x056dc000      C:\WINDOWS\system32\jmdaud.dll
0x73f10000 - 0x73f6c000      C:\WINDOWS\system32\DSOUND.dll
0x77c00000 - 0x77c08000      C:\WINDOWS\system32\VERSION.dll
0x06d50000 - 0x06dae000      C:\WINDOWS\system32\jmmpa.dll
0x06c20000 - 0x06c2b000      C:\WINDOWS\system32\jmvcm.dll
0x75a70000 - 0x75a91000      C:\WINDOWS\system32\MSVFW32.dll
0x070b0000 - 0x070c6000      C:\WINDOWS\system32\jmmpegv.dll
0x07210000 - 0x07218000      C:\WINDOWS\system32\jmddraw.dll
0x073e0000 - 0x0748c000      C:\WINDOWS\system32\jmvh263.dll
0x6d3e0000 - 0x6d3e6000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\jawt.dll
0x07340000 - 0x07349000      C:\WINDOWS\system32\jmfjawt.dll
0x76c30000 - 0x76c5e000      C:\WINDOWS\system32\WINTRUST.dll
0x77a80000 - 0x77b14000      C:\WINDOWS\system32\CRYPT32.dll
0x77b20000 - 0x77b32000      C:\WINDOWS\system32\MSASN1.dll
0x76c90000 - 0x76cb8000      C:\WINDOWS\system32\IMAGEHLP.dll
0x72d20000 - 0x72d29000      C:\WINDOWS\system32\wdmaud.drv
0x72d10000 - 0x72d18000      C:\WINDOWS\system32\msacm32.drv
0x77bd0000 - 0x77bd7000      C:\WINDOWS\system32\midimap.dll
0x73ee0000 - 0x73ee4000      C:\WINDOWS\system32\KsUser.dll
VM Arguments:
java_command: FrameLogin
Launcher Type: SUN_STANDARD
Environment Variables:
CLASSPATH=.;.;C:\PROGRA~1\JMF21~1.1E\lib\sound.jar;C:\PROGRA~1\JMF21~1.1E\lib\jmf.jar;C:\PROGRA~1\JMF21~1.1E\lib;
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
USERNAME=Tung
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 1 Stepping 2, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 1 (cores per cpu 1, threads per core 1) family 15 model 1 stepping 2, cmov, cx8, fxsr, mmx, sse, sse2
Memory: 4k page, physical 245280k(6040k free), swap 2279684k(1755548k free)
vm_info: Java HotSpot(TM) Client VM (1.5.0_13-b05) for windows-x86, built on Sep 25 2007 19:11:52 by "java_re" with MS VC++ 6.0
==============================================================================
Is it a problem with jre or a problem with socket connection?
Please help me! Thanks!

rohitmadiwal, don't post on old threads. If you have a problem, post a new thread.
The above error was caused by a bug in the JNI code inside of JMF. The best solution to such problems is to reboot your system, and if that doesn't work, reinstall JMF.
If neither of those 2 things fix it, it cannot be fixed.

There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

Hello,
I have an issue with connecting client SB1H on Windows, the scenario is as follows:
1.- Server:
     Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
     NDB and Server are review 69 SP06
2.- Client:
     Windows 8 Pro Virtual Machine on Microsoft Hyper-V
     SB1H PL 11 version 32bits
     SAP HANA Studio version 1.0.60
When I run SB1H the following message appears:
There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
Any idea what could be the solution?

Hi,
Please check SAP notes:
   1993392 - Server components setup wizard: New default values for certificates and single sign-on option
1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
Thanks & Regards,
Nagarajan

Problem with configuring the application in websphere

Hi,
We have taken the back up of war file which was working and have deployed the same,We are using websphere as the application server due to some problem with the configuration we are getting the following error when we are trying to run the application.
Could any one please suggest on the same.
[7/22/08 5:04:30:766 EDT] 9f0473c WebGroup E SRVE0026E: [Servlet Error]-[GAServlet]: java.lang.NoClassDefFoundError: Error while defining class: com.xxrx.ga.al.GAServlet
This error indicates that the class: com.objectframe.servlet.OFServlet
could not be located while defining the class: com.xxrx.ga.al.GAServlet
This is often caused by having the class at a higher point in the classloader hierarchy
Dumping the current context classloader hierarchy:
==> indicates defining classloader
*** indicates classloader where the missing class could have been found
==>[0]
com.ibm.ws.classloader.CompoundClassLoader@1fec073f
Local ClassPath: C:\Documents and Settings\XG\Desktop\MyWorkspace\XG_Pilot\WebContent\WEB-INF\classes;C:\Documents and Settings\XG\Desktop\MyWorkspace\activation1;C:\Documents and Settings\XG\Desktop\MyWorkspace\classes121;C:\Documents and Settings\XG\Desktop\MyWorkspace\CLIENT-GDDRel40-QA.71;C:\Documents and Settings\XG\Desktop\MyWorkspace\cos1;C:\Documents and Settings\XG\Desktop\MyWorkspace\ejs1;C:\Documents and Settings\XG\Desktop\MyWorkspace\fscontext1;C:\Documents and Settings\XG\Desktop\MyWorkspace\jfoundations1;C:\Documents and Settings\XG\Desktop\MyWorkspace\JRAPI-GDDRel40-QA.71;C:\Documents and Settings\XG\Desktop\MyWorkspace\LOADER-GDDRel40-QA.71;C:\Documents and Settings\XG\Desktop\MyWorkspace\log4j1;C:\Documents and Settings\XG\Desktop\MyWorkspace\mail1;C:\Documents and Settings\XG\Desktop\MyWorkspace\MAILER-GDDRel40-QA.71;C:\Documents and Settings\XG\Desktop\MyWorkspace\mvcf-1.0.21;C:\Documents and Settings\XG\Desktop\MyWorkspace\providerutil1;C:\Documents and Settings\XG\Desktop\MyWorkspace\REPORT-GDDRel40-QA.71;C:\Documents and Settings\XG\Desktop\MyWorkspace\XG_Pilot\WebContent;
Delegation Mode: PARENT_FIRST
[1] com.ibm.ws.classloader.JarClassLoader@531728191 Local Classpath: Delegation mode: PARENT_FIRST
[2] com.ibm.ws.classloader.ExtJarClassLoader@1932756796 Local ClassPath: E:\XIP\IBM\WebSphere Studio\Application Developer IE\v5.1\runtimes\ee_v51\lib\app; Delegation Mode: PARENT_LAST
[3] com.ibm.ws.classloader.ProtectionClassLoader@723a473c
[4] com.ibm.ws.bootstrap.ExtClassLoader@3822873d
[5] sun.misc.Launcher$AppClassLoader@383fc73d
[6] sun.misc.Launcher$ExtClassLoader@3833c73d
---Original exception---
java.lang.NoClassDefFoundError: com/objectframe/servlet/OFServlet
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code))
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:446)
at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:300)
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at java.beans.Beans.instantiate(Beans.java:201)
at java.beans.Beans.instantiate(Beans.java:62)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadServlet(WebAppServletManager.java:188)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.getServletReference(WebAppServletManager.java:455)
at com.ibm.ws.webcontainer.webapp.WebApp.getServletReference(WebApp.java:652)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcherInfo.calculateInfo(WebAppRequestDispatcherInfo.java:187)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcherInfo.<init>(WebAppRequestDispatcherInfo.java:68)
at com.ibm.ws.webcontainer.webapp.WebApp.getRequestDispatcher(WebApp.java:1462)
at com.ibm.ws.webcontainer.webapp.WebApp.getRequestDispatcher(WebApp.java:1421)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:268)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:618)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:443)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:672)
--- end Original exception----

Hi Guillaume,
I have been "playing" with section you mentioned since yesterday, but I could reach my goal :(
An example of the problem is as following:
Manager 1 is added to both “Project Managers” and “Resource Managers”. Accordingly he is added to “My Projects” category permission.
Manager2.TeamLead1 (not a descendent of Manager 1) is added to only “Project Managers” and accordingly he is added to “My Projects” category permission.
I want (Manager2.TeamLead1)’s projects to viewable only for his Manager 2 (and the Director), not for Manager 1, because the Manager1 is not responsible for managing his work
How can I achieve that ?? :)
Thanks,

Airport Extreme Utility problem with Vista (works with XP, MacOS)

Hi,
I just setup a new Airport Extreme network at my house, and most things are working fine. I have wirelessly connected at various points an Airport Express (using WDS), a MacBook Pro (OSX) and an IBM Thinkpad. I have several wired machines as well.
My problem: The wired machine I use to configure and setup everything is a Vista Ultimate machine. Unfortunately, the Airport Utility won't connect to the Airport Extreme (or Airport Express for that matter) from Vista. The utility works fine from XP or OSX, but not from Vista. Note that I'm using this in a wired capacity. The Vista machine is directly connected to the Airport Extreme, while several other machine are connected through a GBit switch.
Any help would be much appreciated? Is this a Vista security problem or an Airport Utility problem with Vista?

It's most likely a security issue with Windows Vista. Vista has the ability to set "compatibility modes" for applications.
Try:
1. right mouse clicking the Airport Utility's .exe file.
2. Click the Compatibility tab. Change the Compatibility mode to Windows XP (Service Pack 2).
3. Now go down to "Privilage Level" and check the "Run this program as an administrator"
Apple never tells you this but you must connect to the Airport Extreme wirelessly. Now run the Airport Utility. You should see it.

Is Apple doing anything to fix the problem with displaylink in Mavericks?

I have been doing the Beta track for several years. Apple has been fairly good about ironing out the bugs before a release (as compared to Microsuck and other OS alternatives). But this problem with DisplayLink and Mavericks is about to kill me. I've been running multiple displays for several years and never had problems with prior OSX versions. My work computer (Macbook Pro) is still running Lion and works perfectly with DisplayLink and two 27" Samsung HD monitors. I would really love to get back to using the monitor setup with my Dev environment, however I can't even get a 2013 model Mavericks Macbook Pro to recognize that the DisplayLink device (IBM USB3.0 dock) is connected.
Once or twice I've gotten one monitor to show up after using the computer for a random amount of time. On that occasion, suddenly the main screen blinked and the second monitor came to life. I was reading webmail with Safari at the time and no other apps were running or had been started when it happened. This sort of thing isn't what I would classify as release-ready.
Every seed announcement I keep hoping for a fix, but after 3 since the Mav release, I'm beginning to lose hope. Anyone have info on how this might be made to work?
Thanks
David

DisplayLink also points fingers at Apple, which may be completely valid, but expecting Apple to put much effort into problems that only affect third-party hardware using an unsupported interface seems a bit of wishful thinking.
However, rumor sites indicate a focus on graphics in the next update : http://www.macrumors.com/2014/03/06/apple-seeds-first-os-x-10-9-3-build-to-devel opers/

Problem with Pxe on IBM ThinkCenter

Similar Messages

Maybe you are looking for