Problem with QT Pro v7.4

Hi,
My Windows XP Pro Registry reports a problem in that the HKEYCLASSESROOT\CLSID .....link refers to Flash9d.ocx, whereas QT v 7.4 has installed Flash9e.ocx in Windows\System32\....
I have uninstalled/installed my registered QTPro several times without a cure.
How can I solve this?
len21

Hi Members,
Please accept my apologies for wasting your time.
I have now determined the problem is not related to Quicktime (Windows).
Problem solved.

Similar Messages

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Refer below link once
App doesn’t open | Progress wheel spins continually

Does anyone still have problems with Premier Pro on Maverick? and is there any known fix?

Does anyone still have problems with Premier Pro on Maverick? and is there any known fix?

I know OSX 10.9 Mavericks introduced a power saving feature called App Nap which is meant to slow down applications that it determins are inactive (or when minimized). This would mostly likely cause problems if you're dynamically linking After Effects comps to your timeline or sometimes exporting to Media Encoder.
Try disabling App Nap for all your Adobe App files...
Go to your Applications folder
Go into individual Adobe app folders (ie. Adobe Premiere Pro CC)
Right-click on the Adobe app file (ie. Adobe Premiere Pro CC.app) and select Get Info
When the info window opens up, add a checkmark beside "Prevent App Nap"
Restart the application
This fixed all my performance issues.
-Pete

HI, I just bought Photoshop CS5 and I have a problem with HDR pro

HI, I just bought Photoshop CS5 and I have a problem with HDR pro . when I am trying to mount 3 images together it act in a strange way ( the images appear and disappear many times) then when the window with the result appear and I say ok it open up in photoshop as a single image ( in the layers there is just 1 photo) and when I am trying to work it up with the Plug in/filter HDR Effex Pro (Nik softwear) a pop up window appear saying that the file is missing and the operation it is not possible. Why and what is happening ? Someone can help me ?

This is normal operation. The output from HDR pro does not produce a layered file. You make all your adjustments in the Nik Plug-in. Once Nik has finished you then make any rinal changes in Photoshop. Trying to use NIK again on the image in Photoshop is not the way to do this.
When HDR pro comes up do you see all the presets and controls? Presets on the left and controls on the right
MK

I have a problem with macbook pro OS 10.5.8 and cannot play youtube anymore, before Yes

i have a problem with macbook pro mac os 10.5.8 and cannot play youtube but before ther is no problem abou this. now there is warning sign to install adobe flash player, but when i install adobe it said cannot be compatible, and I went to the apple store, they sid need to upgrade the system to mac IOS 10.6 and i dont want to spend much... somebody to help me this

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
This, Adobe Flash Player 12.0.0.70, is the current version of Flash. It should work with Snow Leopard or later.

We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...

We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...

Your Acrobat is running in Trial Mode. Try this KB: Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
If it doesn't work you need to contact Adobe Support for assistance.

Having problem with MacBook Pro launching mission control without prompting

Having problem with MacBook Pro, launching mission control without prompting. Please advise. Thank you.

It may be a swipe that's doing this > Mac Basics: Mission Control

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps freezing and Crashing. A simple thing like leaving the project idle for about 15 minutes, you come back and find that it has frozen. Also if you drag out a clip on the timeline you will find that the whole application freezes. Any possible solutions would be much appreciated.

Could be several factors at play here. This ARTICLE might give you some tips on getting your computer ready for an editing session. Note that there are some added tips on Win7, thanks to Black Viper, near the end.
If nothing is helping, then the tips in this ARTICLE might help you find some clues amongst the breadcrumbs left behind with a hang, or crash.
The link in this ARTICLE will give you some general troubleshooting tips.
If nothing improves, then please post back with more details. This ARTICLE will give you tips on what would be helpful.
Good luck,
Hunt

Problems with officejet pro 8100 and Lion?

I just bought a new HP Officejet Pro 8100 Wireless and I have not been able to get it to work correctly. It's hooked up and all the software seems to work but it prints very, very slowly. It takes about 2 minutes to print a color page. Is there some known problem with OJPRO8100s and Macs with OS X Lion on them? I downloaded v12.14.0 of the printer package from HP, uninstalled what came with the printer, and installed the latest and greatest. Didn't make a bit of difference.

Officejet Pro 8500a extremely slow printing with Lion Mac OSX 10.7
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-Pro-8500 a-extremely-slow-printing-with-Lion-Mac-OSX-10/td-p/1030521

SSD-problem with MacBook Pro 13" (Early 2011)

Hi there,
I've tried to use two different SSDs in my MacBook Pro 13" (early 2011). The first one (Samsung 840 Series, 500GB) crashed after two days: the beachball appeared and after a restart there was this question mark-symbol on my screen: no system found. Had to send this SSD back to Amazon. A few days later I've bought a new one, a SanDisk Extreme with 450GB. I've used it for two days, then my system crashed again and after a restart of my Mac I couldn't get any further than to the grey apple-symbol. Even the recovery partition didn't work anymore. Does anyone of you have the same problem with his (or her) MacBook Pro 13" (early 2011) - and any ideas for a solution?
Thanks for your answers!
Torsten

can you confirm if this is ok to buy:
http://www.ebay.ca/itm/New-HDD-Hard-Drvie-Cable-for-13-MacBook-Pro-A1278-MD101-M D102-821-1480-A-2012-/181269577616?pt=LH_DefaultDomain_0&hash=item2a34823f90&_u h b=1
or
http://www.ebay.ca/itm/NEW-MacBook-Pro-Unibody-13-A1278-2012-md101-102-HDD-Hard- Drvie-Cable-821-1480-A-/121183868039?pt=LH_DefaultDomain_0&hash=item1c371f1487& _ uhb=1
or this one..??
http://www.ebay.ca/itm/for-APPLE-MacBook-Pro-13-A1278-HDD-Hard-Drvie-Cable-MD101 -MD102-821-1480-A-2012-/331060187298?pt=LH_DefaultDomain_0&hash=item4d14b990a2& _ uhb=1
i guess i aint gotta buy those brackets again..?
Thanks
Anjillan

Printer problems with Officejet Pro 8500 A910

Dear all,
I have been given as a present an Officejet Pro 8500 A910 (serie number CN16LDM020 and product number CM756A). The people whom I have got it from already had some problems with the printer heads. I have accepted the printer, because I want to have it working again. I do encounter some problems however. I hope you kind people on the forum can help me out and get this thing working again. As a side note: I am only interested in using the scanner, printer (only black and white - I do not print in colour) and e-printing (I understand that it is possible to email documents to printer, so that they are printed whilst you are somewhere else).
Upon installation I have conneted the internet to my wi-fi. Upon installation it made some test prints, whereby the black dots were good, but the cyan and other colours were not. When I now turn off the installed printer and switch it on again it takes the printer about 5 - 7 minutes to initialize. On the touch screen of the printer it is said "Checking printer, this might take 5 minutes", "Checking printheads", "Aligning printheads" and alike notifications. After 5 - 7 minutes the printer gives the following notification: " Failure notice. Alignment failed. Refer to device documentation for details." When I then push the question mark on the touch screen the following notidication is given: " Alignment failed. Check printer quality of the current print job. If it is not satisfactory, try aligning the printer to see if that improves the quality. To align the printhead again, touch (home), touch (arrow right), touch Tools, and then touch Align Printhead." When I follow these instructions, the same thing happens. I have tried the option "Clean printheads" under "Tools". The test prints that come out are again good in black and white and not good in colour.
The ink level of the cartridges is very low for Yellow, Magenta and Cyan. For Black the printer gives a question mark. The expiry date of the cartridges is in 2015. The information on the Self Test Diagnostic Page (you get when you print a report from checking the ink cartridges) gives the following status:
Printhead status
Printhead health: Good (for both Black/Yellow and Magenta/Cyan)
Serial: 7735960 (Black/Yellow) and 7744345 (Magenta/Cyan)
End of warranty: mid-2013
Accumulated ink usage (ml): Black 99/Yellow 71, Magenta 57/Cyan 58
Refilled supply:
Detected in printhead/printer? For all cartidges "yes".
When I try to print a document from Word on my MacBook (which runs on Mac OS X 10.6.8) and the printer is on stand-by, Word recognizes the printer, starts with the print order but then comes with the notifications "Printer offline" and "Cannot find printer" and postpones the print order. Today I reset the printer and the print job that I had before the reset (which was postponed) came out.
Today, I printed a document whilst the printer was not on stand-by (the touch screen was on home menu) and the print was well (it was only black and white). After the print, the printer also made a print report. Again, the colour was bad, but black ink was good. After that print report, the printer started aligning again. After 5 minutes it gave the above-mentioned failure notice (" Failure notice. Alignment failed. Refer to device documentation for details.").
I would assume that the first thing that I should do is get new cartridges. However, since I only print black and white, can't I just buy the Black Ink and disable the other cartridges? Then, I am thinking of not buying HP cartridges (since the warranty term is already over). What cartridges do you reccomend (price-quality)? If new cartridges are installed (previous owner had same problems with full cartridges) and the problems (with print heads) are not solved, what should I do?
On a second note, I want to use the option of printing online. In other words, give a print order on my Iphone to the printer so that it starts printing at home. How do I set this up? How can I test this?
I would be very obliged with your feedback on the above.
Kind regards,
Onno

Hey Onno,
I see you have several items listed about your Officejet Pro 8500a (A910 series) printer. The main issue that stands out is the print quality issue. I would advise starting here with your printer.
From your information I can see that refill or remanufacture cartridges have been used in this printer at some point. It is possible that the ink from these cartridges have damaged the internal ink system of the printer. If you have performed all the troubleshooting steps for the print quality issue you are experiencing, then the next step is going to be replacing the printheads of the unit.
Troubleshooting Print Quality Issues
The 8500a requires all cartridges be available even if you are simply printing in B&W. If the cartridges are low, then you will have to replace the cartridges as needed. Typically by the design of this printer, however, print quality issues do not follow ink levels in the cartridges as ink is piped to the internal printheads, thus even with empty cartridges there is some ink remaining in the system.
The printheads for the 8500a can be found at most HP certified retailers if you decide to attempt replacing them as a step towards resolving the issue. As to the cartridges, I would advise using genuine HP cartridges as HP ink is designed with HP printers in mind. For information about refilled/remanufactured cartridges please click here.
Hope this helps in getting the print quality issue alleviated,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Printing problem with Acrobat Pro 10.1

I get an "Insufficient memory" message on my LaserJet printer when trying to print certain PDFs using Acrobat Pro 10.1, but the PDFs are printed without any problem from Acrobat Pro 9 or Preview. Does anybody else have this problem?

Thanks for responding I was using an MS Excel spreadsheet to merge details to produce labels in a programme called NiceLabel Pro. The information from the spreadsheet was very simple - a readable code number and a QR code. In the Nice Label document setup you nominate the printer - in my case this was the Adobe PDF printer - to produce a Press Ready quality PDF file. I tried several times to print this file and each time ended up with page 1. As the job was urgent and I had a deadline to meet, I ended up installing a programme called Nitro - which also produces PDF - to complete the job, without a problem. However, I would prefer to stick with my Adobe Acrobat software as the other alternative is limited in its pre-press options. Hope this information will enable a solution to the problem.
- Thanks, Lynne
Hi again Dov - have you been able to come up with an answer to my Acrobat problem. Would like to begin 2015 with workable Acrobat.
Many thanks - Lynne

Problem with Logic Pro and Soft eLicenser on Mountain Lion?

Hi!
I have a bunch of Arturia synths, which requires the Soft eLicenser to work. This has always worked great with Lion, never any problems with eLicenser (never had to open it etc.)
Now - I upgraded to Mountain Lion, and tested my synths to make sure everything was OK, experienced a bunch of problems, and did a full recovery to clean Mountain Lion.
After installing the Arturia synths, and adding my licenses, I installed Logic. Everything worked fine!
BUT!
When I closed an Arturia synth within Logic, or closed Logic after running a project with one of these synths, I couldn't reopen any of these synths within Logic afterwards - In fact, I couldn't open the stand-alones either! And when I tried to open the eLicenser Control Center, it would just say "Reading eLicensers" forever. After a reboot, everything is OK.
I can open and close eLicenser Control Center and standalone synths as many times as I want, as long as I don't open Logic, and then Arturia synths as an AU in Logic.
I found a workaround: Open the eLicenser Control Center, and let in run in the background (cmd+H), and then open Logic. Then I could open Arturia synths and close them, close Logic and reopen etc. without any problems at all. NO PROBLEMS.
Until I close the eLicenser Control Center, then I have to reboot to be able to start it again.
I hope you understand what I mean here. It's a bit hard to explain.
In short terms: Logic makes Soft eLicenser crash when a eLicenser synth has been opened as an AU.
The same problem is when scanning the AU with AU manager. eLicenser window should be open before scanning.
Does ANYBODY have the same problems? Can anyone who has these applications test it out?

So it definitely seems to be a issue with Logic.
I can't force this error in 10.7.X no matter how hard I try, but in 10.8.2 it's definitely Logic messing things up.
Could it be auvaltool which has a bug? Or is that only run with AU manager on validation?
Hopefully this discussion can get some attention, and maybe it could be corrected. I guess a lot of Logic Pro users also has eLicenser Control Center for validation of their products.

If I install the update to Adobe Reader 10, will that cause problems with Acrobat Pro 9?

Firefox (version 15.0.1) is telling me I need to install an update to Adobe Acrobat 9.4 in order to view pdf files in my browser. I use Acrobat Pro 9. The update is actually Adobe Reader 10, and I am wondering if I install this, will it cause problems with my version of Acrobat Pro?
Because I am not sure if this is so, I have temporarily disabled the plug-in and now pdf files download automatically rather than display in my browser. I would prefer they open in my browser but do not want to upgrade to Acrobat X.
My OS is Windows Vista. I did not include the "troubleshooting information" file because I'm not sure what specific info is being requested.
Thanks for any help.

Hi WMdotcom
did you try to view pdf with your acrobat pro 9 ?
see
[https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file Change what Firefox does when you click on or download a file]
[https://support.mozilla.org/en-US/kb/set-how-firefox-handles-different-file-types
Set how Firefox handles different types of files]
thank you

Problem with Acrobat Pro - install, etc.

I have problem with my Acrobat Pro (in Adobe Design Standard CS6 edition) - Regularly once a month throughout the software crashes and will not turn on. Only helps to re-install. Now I additionally happened that when reinstalling does not load serial number. It made me very disgruntled. Can you please help? Acrobat Pro I still need to work and this is me terribly resides. My customer identification number is : 168735979. Thank you.

Thank you but unfortunately the process does not work. It makes the same thing as before. When I install and enters the serial number, it writes: We are unable to verify the product serial number Creative Suite 6 Design Standard. Please contact Customer Support.
When I deactivated Photoshop and re-activated by the process, everything went without a problem. The problem is only with Acrobat Pro. Acrofix - after running only flashes a command prompt window, otherwise nothing happens. I do not know what to do ....

Problem with Adobe Pro and Reader on terminal server

Hi,
We have have a Terminal Server environment with Adobe Pro and Reader. We have security for Adobe Pro, so only certain user has access to Adobe Pro and all users has access to Adobe Reader.
Some users receive many email with pdf's attachments in Outlook and need to print these attachments. They use the Outlook function to print email and attachment automatically. The users who has access to Adobe Pro can print attachment automatically with no problem.
The problem is user who only have access to Adobe Reader. The user can't print attachment automatically with the email, only the email is printed. But, they can open attachment and print with Adobe Reader. But, it's impossible to open each attachment because there are so many.
Thanks for your help.
Jonathan

Hi,
So if I understand correctly,
1. You have installed Acrobat Pro & Reader on a Terminal server.
2. You have created a security group in your Active Directory Users & Computers for users having access to Acrobat
3. You have set permissions on C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe and C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrotray.exe on the terminal server and provided access only to the security group created above.
4. Users are accessing the Terminal server through RDWeb or connecting remotely through MSTSC (RDP) or using a .RDP file
5. Users get emails with PDF attachments and print the mail directly without opening the PDF in Reader.
Users check the box to print the attachments with the mail (see snapshot below):
Some questions:
1. What is the OS and platform (x86 or x64) of the terminal server?
2. What are the versions of Acrobat & Reader on the terminal server?
Thanks,
Vinod

Problem with QT Pro v7.4

Similar Messages

Maybe you are looking for