Problem with Queue Table while dropping schema

Hi,
I want to DROP a schema, but it gives the following error while trying to drop it:
ORA-00604: error occurred at recursive SQL level 1
ORA-24005: must use DBMS_AQADM.DROP_QUEUE_TABLE to drop queue tables
From TOAD, I found that no queue or queue_table exists in the database presently.
I'm using 10.2.0.2 RAC database.
Can anyone help me to drop the schema?
Thanks in advance..
Regards,
Anjan

I have followed the doc 203225.1..
Now getting the following error:
ORA-00081: address range [0x60000000000A89A0, 0x60000000000A89A4) is not readable
ORA-00600: internal error code, arguments: [kzdukl3], [24], [], [], [], [], [], []

Similar Messages

Full Export/Import Errors with Queue tables and ApEx

I'm trying to take a full export of an existing database in order to build an identical copy in another database instance, but the import is failing each time and causing problems with queue tables and Apex tables.
I have used both the export utility and Data Pump (both with partial and full exports) and the same problems are occurring.
After import, queue tables in my schema are unstable. They cannot be dropped using the queue admin packages as they throw ORA-24002: QUEUE_TABLE <table> does not exist exceptions. Trying to drop the tables causes the ORA-24005: must use DBMS_AQADM.DROP_QUEUE_TABLE to drop queue tables error
As a result, the schema cannot be dropped at all unless manual data dictionary clean up steps (as per metalink) are done.
The Apex import fails when creating foreign keys to WWV_FLOW_FILE_OBJECTS$PART. It creates the table ok, but for some reason the characters after the $ are missing so the referencing tables try to refer to WWV_FLOW_FILE_OBJECTS$ only.
I am exporting from Enterprise Edition 10.2.0.1 and importing into Standard edition 10.2.0.1, but we are not using any of the features not available in standard, and I doubt this would cause the issues I'm getting.
Can anyone offer any advice on how I can resolve these problems so a full import will work reliably?

Thanks for the lead!
After digging around MetaLink some more, it sounds like I'm running into Bug 5875568 (MetaLink Note:5875568.8) which is in fact related to the multibyte character set. The bug is fixed in the server patch set 10.2.0.4 or release 11.1.0.6.

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Problems with a table in PDF`S footer

Dear sirs,
We are having problems when trying to run a PDF with Adobe LiveCycle Designer tool.
We are working with a PDF which is composed of a header, the main body and a footer. We have created a table (table1) at the footer and
another one at the main body (table2). This last table (table2) may overflow therefore it will genarate two pages for our PDF.
On both pages appear the header and the footer correctly but in the last page it does not write the data from the table included in the footer (table1).
We have no problems with the table included in the main body
In the attachments, I send you the screenshots of both pages in which I have marked in red the part where we have error.
May you help us to solve our problem?
Thanks in advance your help.
Edited by: emgaitan on Mar 16, 2010 2:18 PM

Wardell,
Check the data in RSA3 for the extractor that you use to bring data .
You must be using the data source 0CO_OM_CCA_09. Check the data and reconcile and you will get it.
Let me know if you need anything else.
Thanks
Ravi Thothadri
[email protected]

Problem with Progress DB while using to connect using JDBC Adapter

Hi,
I am facing Problem with Progress DB while using to connect using JDBC Adapter. I am getting the following error in auditlog file like,
Error during database connection to the database URL jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db using the JDBC driver "com.progress.sql.jdbc.JdbcProgressDriver" : com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL " jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db "
I tried using the following all URLs,
1. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.
2. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.db
3.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.
4.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db.
Can anyone please help me out in solving this issue.
May be the cause for this is :
1) The Wrong URL format
2) CLASSPATH is not setted properly..
Can you look more into this stuff.
Thanks,
Soorya.

Hi,
To access any database fromm XI, using the JDBC adapter, the corresponding drivers have to be installed on the XI server.
Just check this note 831162.
Also, check this PDF to install Drivers in XI,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

Hi i'm using iphone 4 and i have problem with viber apps while i'm installing

hi i'm using iphone 4 and i have problem with viber apps while i'm installing & registration process its says error on system mainternance. can you please help me out?
thank you.

OK, let's try again. Wind is NOT a supported carrier. In order to use tethering, it must be supported and activated by your carrier for the iPhone. This usually involves an additional fee. You will have to ask your carrier if they can enable it. Odds are, since they are not a supported carrier, they can not. If you want to use tethering, you will most likely have to switch to a supported carrier that offers this feature on the iPhone.
A list of supported carriers can be found here: http://support.apple.com/kb/ht1937

I am getting problem with internal table & work area declaration.

I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
TYPES : BEGIN OF ty_makt,
         matnr TYPE makt-matnr,
         spras TYPE makt-spras,
         maktx TYPE makt-maktx,
         maktg TYPE makt-maktg,
         celltab TYPE lvc_t_styl,
       END OF ty_makt.
DATA : i_makt TYPE TABLE OF ty_makt.
DATA : wa_makt TYPE ty_makt .
    But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.

Hi Nagasankar,
TYPES : BEGIN OF TY_MATNR,
              MATNR TYPE MAKT-MATNR,
              SPRAS TYPE MAKT-SPRAS,
              MAKTX TYPE MAKT-MAKTX,
              MAKTX TYPE MAKT-MAKTG,
              CELLTAB TYPE LVC_T_STYL, " Its Working perfectly fine..
             END OF TY_MAKT.
DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
          WA_MAKT TYPE TY_MAKT.
Its working perfectly fine. if still you are facing any issue post your complete code.
Thanks,
Sandeep

Problem with a table control

Hi gurus,
I´ve a problem with a table control. It has 3 columns which one is a checkbox.
I can fill all fields but in the moment I mark the checkbox this line must be unwritable. How can I do it?
Thanks for all
Dani

Assign a function code to the checkbox column....
so when u check / uncheck any entry, PAI + PBO will be triggered....
In the PBO during the loop of table control, check the checkbox field value. if it is 'X', make the row readonly
by looping at screen and setting screen-input = 0 for rest of the columns.
like ...
LOOP AT tc_itab
       WITH CONTROL tc_test
       CURSOR tc_test-current_line.
   module set_row_readonly. " loop at screen and set input = '0' if checkbox is checked...
ENDLOOP.

Problem with maintain table views SM30 Transaction

Hello All,
i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
the ZIV_DP_PLCHAR_LA is the name of my table...
can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
SM30 "maintain table views: initial screen"
if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
to have a new screen?
thanks for all
Bilal

Hi
First delete the old table maintainence generator.
Now Recreate the screen and your table is good to go..
These error messages come when we add new fields and different version of the table maintainence generator in database.

Problem with Pivot Table with Graph: Line Bar Combo

Hello people!
I have a problem with pivot table and line bar combo (all in the same view (pivot table))
I have some measures and one dimension in my report.
--------------measure1---measure2---measure3
Dim A.1
Dim A.2
Dim A.3
If I choose my graph line bar combo automatically choose "line" measure 3 (last measure in "Show Controls"). How can I do if I want my measure1 for line and I don't want modify my pivot table?
Thank you very much!

Ok, I'll explain my problem again. In my pivot table I add graph vision and I want in the same view (Pivot table). My graph is "Line Bar Combo" and I don't know how but the last of my measures belongs to right AXIS, if I change order of my measures I can see in my graph the measure that I want in my right axis BUT also it changes the order of my pivot table.
This is my problem. I think that I can do that with different views but I lose my selector view to view graphic and my pivot table at the same time.

Problem with truncate table in procedure ora -00054

hi do anybody know where is mistake ???
the procedure has problem with truncate table
ora - 00054: resource busy and acquire with NOWAIT specified
ora - 06512 at "POVAPSYS.HMAN_P_REFRESH", line 6
ora - 06512 at "POVAPSYS.POVAPSYS", line 6
ora - 06512 at line 1
this is my procedure....
AS
BEGIN
execute immediate 'TRUNCATE TABLE hman_t_max';
INSERT INTO hman_t_max SELECT * FROM hman_v_max;
COMMIT;
END;

2.MAKE SURE THAT OTHER THAN YOU ANYBODY IS TRYING TO
COMPILE AND RUN THE PROCEDUREShould he make sure that anybody is running the procedure?
3.MAKE SURE THAT ANY PARALLEL QUERY IS RUNNING IN THE
SERVER SIDE,THATS KEEPS THE RESOURCE BUSYShould he make sure any parallel query is running in the server side to keep the resource busy?
Gita,
I COULDN'T RESIST HAVING ONE SUGGESTION FOR YOU. Please look at the impact of your English in the reply before posting. Check if that sends reverse message!
Cheers
Sarma.

Problems with partition tables

Hi all,
I've got some problems with partition tables. The script at the bottom run but when I wanna insert some values it returns me an error
(ORA-06550: line 1, column 30: PL/SQL: ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored)
and I can't understand why!
There's something incorrect in the script or not?
Please help me
Thanks in advance
Steve
CREATE TABLE TW_E_CUSTOMER_UNIFIED
ID_CUSTOMER_UNIFIED VARCHAR2 (27) NOT NULL ,
START_VALIDITY_DATE DATE NOT NULL ,
END_VALIDITY_DATE DATE ,
CUSTOMER_STATUS VARCHAR2 (255)
PARTITION BY RANGE (START_VALIDITY_DATE)
SUBPARTITION BY LIST (END_VALIDITY_DATE)
PARTITION M200909 VALUES LESS THAN (TO_DATE('20091001','YYYYMMDD'))
(SUBPARTITION M200909_N VALUES (NULL), SUBPARTITION M200909_NN VALUES (DEFAULT)),
PARTITION M200910 VALUES LESS THAN (TO_DATE('20091101','YYYYMMDD'))
(SUBPARTITION M200910_N VALUES (NULL), SUBPARTITION M200910_NN VALUES (DEFAULT)),
PARTITION M200911 VALUES LESS THAN (TO_DATE('20091201','YYYYMMDD'))
(SUBPARTITION M200911_N VALUES (NULL), SUBPARTITION M200911_NN VALUES (DEFAULT)),
PARTITION M200912 VALUES LESS THAN (TO_DATE('20100101','YYYYMMDD'))
(SUBPARTITION M200912_N VALUES (NULL), SUBPARTITION M200912_NN VALUES (DEFAULT)),
PARTITION M201001 VALUES LESS THAN (TO_DATE('20100201','YYYYMMDD'))
(SUBPARTITION M201001_N VALUES (NULL), SUBPARTITION M201001_NN VALUES (DEFAULT)),
PARTITION M201002 VALUES LESS THAN (TO_DATE('20100301','YYYYMMDD'))
(SUBPARTITION M201002_N VALUES (NULL), SUBPARTITION M201002_NN VALUES (DEFAULT)),
PARTITION M210001 VALUES LESS THAN (MAXVALUE))
(SUBPARTITION M210001_N VALUES (NULL), SUBPARTITION M210001_NN VALUES (DEFAULT))
;

Hi Hoek,
the DB version is 10.2 (italian version, then SET is correct).
...there's something strange: now I can INSERT rows but I can't update them!
I'm using this command string:
UPDATE TW_E_CUSTOMER_UNIFIED SET END_VALIDITY_DATE = TO_DATE('09-SET-09', 'DD-MON-RR') WHERE
id_customer_unified = '123' and start_validity_date = TO_DATE('09-SET-09', 'DD-MON-RR');
And this is the error:
Error SQL: ORA-14402: updating partition key column would cause a partition change
14402. 00000 - "updating partition key column would cause a partition change"
*Cause: An UPDATE statement attempted to change the value of a partition
key column causing migration of the row to another partition
*Action: Do not attempt to update a partition key column or make sure that
the new partition key is within the range containing the old
partition key.
I think that is impossible to use a PARTITION/SUBPARTITION like that: in fact the update of "END_VALIDITY_DATE" cause a partition change.
Do u agree or it's possible an update on a field that implies a partition change?
Regards Steve

Problem with the table control BDC in FV60 transaction

Hi All,
I got the problem with the table control in FV60 transaction.
This is working for 900 line items.After 900 line items it is giving the problem like it is 1000th line item.You can post only 999 line items.
I know we can post only 999 line items,but in my file only 920 line items.
Please give me solution,if anybody come across this situation.
Thanks & regards,
rakesh.

Hello Rakesh ,
your file may have only 920 line items , but based on those line items, SAP may create few more new lines ( based on the clearing recon accounts , inter company transaction ...etc )...
regards
Prabhu

Problem with automatic table of contents Level headings

I am having trouble with the Table of contents in Adobe Indesign. When I create my automatic table of contents one of the Level headings that is supposed to appear under Chapter 1 instead appears under the Introduction heading. On the actual page where the heading paragraph styles have been defined the 2nd Level heading is as it should be underneath Chapter 1. So what I end up having to do is move them manually in the TOC. But I don’t want to have to do this and it would be great if Indesign instead did the automatic table of contents correctly.
I wonder if it has anything to with the fact that our template is set up with headings (that sit outside the body text to the left) as text boxes which we place inside the main body text box (they have anchored object settings on them so the heading sits off to the side). Whilst the anchored text box is exactly in the right sequence, maybe indesign senses and reads the anchored text box last?
I have an example of the file and the problem that is occurring in the pdf, it can be downloaded from:
Is there a solution to this? If anyone has any ideas I would be very grateful.

I've been playing with this for a while, and quite honestly I don't understand why it's doing things the way it is. It's working correctly on Page 11, which seems to me to have exactly the same structure, except for the subtitle. It also works correctly if I copy the frames from page 14 and paste into a new doc.
Things I tried that did not work: Export as .inx and move the pages to a new doc. You might try copying the text and pasting into a new doc.

Problem with Queue Table while dropping schema

Similar Messages

Maybe you are looking for