Problem with Quiz created in Captivate 4 imported to Captivate 5

Good day,
I finally got upgraded to the eLearning Suite so I am now using Captivate 5. I have a course that has a quiz built in Captivate 4. It is designed that if the user scores less than 80%, they are returned to the start of the quiz. If they pass, it is supposed to jump them to the "completion" screen" I have created. However, since I imported this into Captivate 5 and I view the quiz, on the first fail, it takes me back to the beginning of the quiz on my first try. However, on the second try if I fail it again, it just goes to a white screen. I have changed the "On Fail" settings to 999 and indefinite. Neither seem to have an impact. Not sure what else I could try.
The thought of rebuilding the quiz makes me wish we had more than three stories in this building!
Here is a link to my captivate 5 file. http://coventry.mzinga.com/content/ss/TestSCORMFiles//Enhanced_Authorization_Integration/w orkers_comp_just_the_quiz.cptx
Any help would be GREATLY appreciated.
Thanks,
Eric

Hi Eric
While it may make you feel like you have accomplished something by asking if Adobe has updates, what you have done is the equivalent of walking into the waiting area of the service department of a car dealership and asking aloud if there are any updates on your vehicle. The other customers are likely the only ones that hear you ask and they just look back at you with puzzled expressions on their faces.
The thing is, this forum is a bit unusual in that members of the actual Adobe Captivate development team visit here occasionally. But you can't count on that being the case. They do have other work to do.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Similar Messages

Authorization problem with VF01 "Create Billing Documents"

Dear All,
We face following problem with VF01 "Create Billing Documents".
Transaction: VF01
User: Joe
Authorization of Joe:
     VKORG Sales Organization: A, B (authorization object V_VBRK_VKO)
     FKART Billing Type: 1, 2 (authorization object V_VBRK_FKA)
The objective for Joe:
   Joe is qualified to create bills in
      sales org A only for billing type 1 and in
      sales org B only for billing type 2.
   Joe should not be able to create bills for
      sales org A with billing type 2 and in
      sales org B with billing type 1.
How can we solve this problem?
We already searched for userexits without any success.
Any help or ideas are very appreciated.
Regards
Markus Wilhelm
Project Manager ERP

Dear,
There are standard authority-checks based on Sales organization (authorisation object V_VBRK_VKO) and/or Billing type (V_VBRK_FKA).
An option would be to create a new billing type, define specific authorisations and use the new billing type for these documents.
The bad thing is that you would also need a special (new) sales order type, because the billing document type is unique per sales order.
So maybe it is easier to have a different sales organization.
Another option would be to create a new authorization object and check it in the billing documents.
If you wish, you could modify program LV60A005 & LV60A006.
Then you might check various user/customer exits.
Some functions to check: EXIT_SAPLV60A_001/002,
EXIT_SAPLV60B_001 - 008, EXIT_SAPLV60B_010 - 011.
Regards,
R.Brahmankar

Problem with implicitly created Oracle pipes

Hi, I am having a problem with implicitly created Oracle pipes. I am not sure if this is the correct forum for this topic, but I could not see one which suited better..
I am using Oracle pipes as a commiunication mechanism between processes (some are written in PL/SQL and other in PRO*C).
The general problem I have is that if a timeout occurs during the communication process, I end up with 1 or perhaps 2 implicitly created pipes.
The biggest problem for me is that I am unable to determine if a create is implicitly created (via dbms_pipe.send_message or receive_message). This causes problems, since these implicitly created pipes are left behind and not deleted. I'll show you the basic flow of the processes and you shall see my problem.
server: create request pipe "req_pipe"
server: listen for request on requests pipe.
client: create two pipes for comms with server.
client: send request and the names of the newly created pipes to the server.
server: read request and pipename from request pipe (from this point all comms between the client and server are now done over the 2 pipes the client created).
server: send ack message to client to ensure they are still there (since requests can be queued in the request pipe and clients could have timed out before the request is received)
client: send "i'm still here" ack back to the server.
server: process request and send result back to client.
client: send ack back to server to let server know we have received the response.
server: send ack back to client to show that work is now committed.
OK thats the general event flow. I use the rule, that pipes created by a process are removed by a process. So the client always removes the pipes it created in all situations. But since this can happen at any point we can get in the situation:
client: timeout occurs, delete pipes.
server: send message to client (creates an implicit pipe) and therefor works (no errors raised)
server: do a read for response from previous message. (implicitly creates pipe) (will fail).
Now we have two implicitly created pipes! These pipes will exist until the database instance is shutdown, and in a poorly performing environment, we could get thousands of these pipes lying around... not a good situation.
How can I either stop pipes being implicilty created, or how do I detect if a pipe was implicitly created.
I have tried a couple of things, like using v$db_pipes to check if a pipe exists before doing send/reveive calls but this is FAR to slow to do a select on that view.
We have also looked at keeping a record of pipes created by the client then have some process (perhaps the server) clean up these pipes after some time frame. This is a workable solution but is not favourable since it adds extra overhead having to check these pipes often, and created an extra level of complexity which is not required..
Any suggestions will be greatly appreciated.
Feel free to email me with any suggestions on my email provided below, or just post a reply to this formum..
Many thanks,
Karl Bridger
[email protected]

I solved the problem by changing the SOAP massage format from Document/Wrapped to Document/Literal

Import Manager - Problem with 0..n field in Import Manager

Iu2019m having problems with XMLs that contain multiple or single tags in MDIS process. For example: I did the map using a XML with multiple tags for Address:
<address>
<item>
u2026
</item>
<item>
u2026
</item>
</address>
When I send two address or more Address, the Import Server work fine, but when I send only one Address, the address is not imported.
<address>
<item>
</item>
<item>
</item>
</address>
Opening the xml file with only one Address in Import Manager, I saw that the fields isnu2019t mapped, but when I open a xml file with multiple Address itu2019s open correctly.
The XSD cardinality for the Address\Item is 0..n

Hi Evandro ,
If it is processing the input file correctly through the Manul Import manager process then update your latest Map by using SAVE As option or else save this correct map with a new name altogether and use this new map in the port for automatic importing.
If your file is able to process correctly through the Import manager without showing any errors till the Import step in the Import manager then this map must be correct and shoul automate the importing correctly.
Provided you are using the similar file for automatic importing as well.The file name and the fields as well as the value mapping as saved in this corrected map must not differ with the input file else this saved map will not be able to import correctly.
Check to see if you have made correct setting for automatic importing by refering the below link:
http://help.sap.com/saphelp_mdm550/helpdata/en/43/12036df94c3e92e10000000a1553f6/frameset.htm (Automatic importing MDIS - Import manager ref guide>MDM import server(MDIS)>MDIS Consfiguration)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8973bcaf-0801-0010-b7a7-f6af6b1df00e(mdm import and syndication server)
Also check the exception folders if your import is not taking place automatically:
http://help.sap.com/saphelp_mdm550/helpdata/en/43/12036df94c3e92e10000000a1553f6/frameset.htm (Exceptions- MDM Import Manager MDIS-Exception handling)
Hope It Helped
Thanks & Regards
Simona Pinto

Problem with ASP "Create form wizard" or "Update form wizard" and "Upload file"

Until now it used version 3,7 and dinamyc had never had problems with "Create form wizard" or "Update form wizard" and "Upload file" but now when I create the form and shipment a file leaves an error to me:
Error:
Error al borrar directorio. Error de seguridad.
Developer Details:
Error al borrar directorio. Error de seguridad. El directorio 'E:\web\eds\maqueta\' esta fuera del directorio base 'E:\web\eds\maqueta\fotosactivi2\'. (FOLDER_DEL_SECURITY_ERROR)
tNG Execution Trace - VIEW
* tNG_insert.executeTransaction
o STARTER.Trigger_Default_Starter
o tNG_insert.doTransaction
+ BEFORE.Trigger_Default_FormValidation
+ tNG_insert.prepareSQL
+ tNG_insert.executeTransaction - execute sql
+ tNG_insert.postExecuteSql
+ AFTER.Trigger_FileUpload*
+ ERROR.Trigger_Default_Insert_RollBack
* tNG_insert.getRecordset
* tNG_insert.getFakeRsArr
* tNG_insert.getLocalRecordset
* tNG_insert.getFakeRecordset
* tNG_insert.getFakeRecordset

Hello,
Please see this thread http://www.adobeforums.com/cgi-bin/webx/.3bc3c678/2
for the same problem.
Regards,
Razvan RACASANU

Problems with DVD created in iDVD

I have a project I put together using Final Cut Express and Logic Pro. I created the DVD project using iDVD, and am having problems with the disks that I burn - they hang part-way through on various devices (after multiple burns).
I then saved the image to an .IMG file and tried to burn it on 2 different computers using different media (DVD+R and DVD-R) and at different burn speeds through Disk Manager. The disk burns ok, but fails validation with the message "Unable to burn ... (Verification of the burn failed.)"
When I mount the image on my local hard drive and play it through DVD Player, I experience no problems. This is really, really strange.
Brian

Nope. Can't do it that way. Much better to do a fresh install to each mac......or Unless you made a bootable clone of your existing HD with CCC or SuperDuper on a like mac system. Did you do this?
In other words, to clone an existing HD you'd have to format the ext. HD to mac os extended and then move the ext. HD to a similar mac from which you would boot you mac from like this:
Click Here
Hope this helps but if not just comer on back.

I have a problem with my iPhoto: I want to import my photo's from my iphone to my Mac, but the program of iPhoto stucs what to do?

I can't go further with importing my photo'sfrom my iphone > Who can help me?

If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Problem with quiz results.

Hey guys, i have a problem with a quiz that i need to do, i've been using this template: http://www.permadi.com/tutorial/flashMXQuiz/index.html
But what i need and it doesnt include is how to put a message at the end of the game which tells you that you won or lost depending if you had at least two questions right or less than two right.
I´ve been searching and have not found any code that i could just add to my ActionScript.
I also have been trying with variables like this:
if(numofQuestionsAnsweredCorrectly>=2){gotoAndPlay(3)}
else
{gotoAndPlay(6)}
..and stuff like that. I'm sorry if that's completely wrong..I'm just starting to learn.
I hope anybody can help me with this.
Thanks

Page 3 of the tutorial shows you the SummaryScreen. They calculate the percent correct there:
userScore=(numOfQuestionsAnsweredCorrectly * 100) / (numOfQuestionsAnsweredIncorrectly + numOfQuestionsAnsweredCorrectly);
It's right there you should stick your code to change to the frame you desire. Make sure you're changing the correct clips playhead.
Do note they're using a lot of frame labels (and they're using flash player 6 with some ancient ActionScript 1.0 coding). There's a chance this quiz won't work in the future. Even ActionScript 2.0 has been depreciated and is currently unsupported by the latest version, Flash CC. It doesn't mean the browser plugin doesn't support it but eventually it may. It's long overdue..
For the 1.0 code though, at the point I mentioned you should be able to do it with what you have (if you want to switch the main timeline to those frames via _root.
if (numofQuestionsAnsweredCorrectly >= 2)
_root.gotoAndPlay(3)
else
_root.gotoAndPlay(6)
If you want "some other" clip to move to that frame then add the instance name after _root, e.g. _root.myClip.gotoAndPlay(3);, etc..

Programming Web Item. Problem with URL creating

Hi,
I am trying to programm a own Web Item.
I derived from the class CL_RSR_WWW_ITEM_VIEW.
Everything is worken fine. I just have a problem with
the creation of links.
In the WAD there is the very nice way of using SAP BW URLs
like:
<SAP_BW_URL cmd="PROCESS_HELP_WINDOW"
help_service="ZPRINTING"
item="TABLE_1"
suppress_repetition_texts=""
P_PREVIEW_MODE=" ">
Is the a method or something similar to do the same with abap?
Greetings
Mike

I found out mayself!
You just have to use the object CL_RSR_PARAMETER.
There you can add parameters.
Then use the method get_url of the object CL_RSR_WWW_PAGE to make a URL string out of it.
Mike

Problems with opening/creating projects

Hi all, this is my first post so Welcome
I have a problem with Photoshop CS4 Extendet. After installing it under Windows 7 when I'm trying to start a new project or open a graphic in Photoshop the only thing which happens is a gray window of project without any graphic, without possibility to work on it etc. I know that graphic is loaded but I can't work on it. When I'm trying to move/large window, it crashes. Here you can see what I see when I load any graphic: http://img231.imageshack.us/img231/6120/61404388.jpg - you can see that photograph is loaded in layers menu section but in window it doesn't appear.
I have used this Photoshop under Windows 7, even same computer some time ago, but with different hard disc. And then it worked properly without any problems. I don't know why now after installing it I have such problems. What can I do? Is it a metter of drivers for graphic cards ot something like that? I'm useing the latest drivers for graphic card and all drivers for Windows and it's components are the newest one.
Here is ma computer specification:
Processor Intel Core i7 920 2.67GHz, 6GB ram, two graphic cards NVIDIA GeForce GTX 285, motherboard Asus P6T Intel X58 Windows 7 Home edition 64 bit.
What should I do now?

As is so often suggested here, check the nVidia web site for updated video drivers for your card. Chances are very good they have already fixed this problem.
-Noel

Problems with translated text in captivate 7

I want to create a multilingual e-learning version. I can translate all texts. Unfortunately I can not change the selected text in the pop up window. I have no idea how I can change this text. Can someone give me a tip.

Hellou guys, Somethink similar: After installing 7.0.1 patch the project created 7.0, lose translated text inside Succes/Failure etc. captions and show default English texts, for example in quizes captions. Hmmm... In preferences dialog default labels are still translated, but after publishing project, the captions are English. So I used trick - Find/Replace dialog - and change manually all text captions with translated version. After publishing works fine. When I create new project directly in 7.0.1, there are no problem Perhapse, small bug. Can live with it because the new enhacements inside 7.0.1 is much important.:)
best regards
Yarik

Problems with context-sensitive HTML made from importing FM 10 to RH9

This worked in October and it doesn’t work now.
Start with a clean, well-formatted Frame 10 book with multiple chapters. Chapters, Heading 1, 2 and 3 headings have various FM Markers TopicAlias with ID for calling the help.
Example of FM marker: ID_HELP_SYSTEM_DEFAULT
Import FM book to RH 9 –pointed to an AllStyles.fm doc as a template, pagination on the above 4 headings, cross-refs mapped, on the Other Settings page the Context Sensitive Help Marker is set to TopicAlias.
Import looks spiffy; great TOC, Index, formatting, links, everything is exactly like I expected. Create chm file help. It looks great too. This part works well IMO.
My.h file is formatted with Hex number to match the application’s call.
Example:
#define ID_HELP_SYSTEM_DEFAULT 0x3F131
#define ID_HELP_EDITDATASET_TOOLBAR 0x3F132
Rename my mapping h file to BSSCDefault.h and put in root directory replacing the one RH makes. [When RoboHelp makes an h file, the numbers it assigns do not match what my application calls for. Changing these is not an option. I have hundreds of mapped IDs.]
Reopen RH and view the BSSCDefault. h file from RH. It has magically changed the Hex numbers to 6 digit numbers.
Example:
ID_HELP_SYSTEM_DEFAULT              258353      Saving Project Defaults as System Defaults
ID_HELP_EDITDATASET_TOOLBAR 258354      Editing Datasets Using the Mouse
The Mapped IDs are blue and are not locked. My FM TopicAlias Markers are all listed as Map IDs, I have Map#s for them and they point to the correct topic. The center panel shows Assign as grayed out. The project that worked in October looked just like this too, I checked.
Recomplie. Place new chm file in application. It will open from the menu item for Help, it will open from F1 but it will not open from any of the mapped Help buttons.
I uninstalled/reinstalled RH 9 and tried reimporting/compileing with an unpatched version. No change, still borked.
There has not been a change in the application; there are no new IDs in this version. I tried the new compiled help in an older version of my application and it will not work. Same behavior.
Any suggestions? Anyone else have this problem? What am i missing?

I dont use the settings file, I use a FrameMaker doc as a template. It has all my styles and I set the others before the import. There arent very many.
But, since you import from Frame, would you look at this and verify?
Looking at Map File in the Edit Map IDs dialog On the left the panel the Map ID is listed, then the Map # and finally the topic title.
Do your Topics show a notation at the end?
Example: Averaging Datasets #CSH_71
Then on the Topic panel if you find that same topic you see
Topic symbol -Averaging Datasets   [and the Topic properties show “no map ids for this topic]
Bookmark symbol -Averaging Dataset#CSH_71 [topic properties show the map id when you select it]
Bookmark symbol -Averaging Datasets#IX_averaging_datasets
Bookmark symbol-Averaging Datasets#XREF_25075_Averaging Datasets
I understand the Index and cross ref markers, but the isolated book mark is odd. You would think the notation would be on the topic
The chm file from October works in my latest build, and the developers swearz they changed NOTHING in the way it is called. I still have to talk to QM who do the builds just in case.

Problem with quiz

Can anyone help me out. i am fairly new to using Aurthorware
and have created a training demo which has 2 quizzes in it.
The problem I am having is that when I run the package only
one or the other quiz will work. Whichever one I go to first will
work and the other will just show up with the summary saying 0
questions etc.
Any help or advice would be appreciated.
Karen

You can initialize the specific variables that are being
used...
"Mike Baker **Adobe Community Expert**"
<[email protected]> wrote in
message news:f0812b$8u0$[email protected]..
>I believe you're right Erik. IIRC the quiz KO is designed
to only have one
> per file. I seem to recall some solutions using
"Initialize" before the
> beginning of the second one, but you'd lose all the
contents of all the
> variables in the whole file. Might be better to break
the quizzes out of
> the
> file and jump to them.
>
> HTH,
> Mike
>
> "Erik **AdobeCommunityExpert**"
<[email protected]> wrote in
> message news:f07vf9$6va$[email protected]..
>> Agreed with Mark. As a WAG, I think two Quiz KOs
have been used and one
>> is picking up the progress of the other. I'm not
sure if this is typical
>> behavior or what, not having used the KOs much at
all... I'd assume it's
>> some KO setting?
>> Erik
>>
>> kjuniper wrote:
>> > Can anyone help me out. i am fairly new to
using Aurthorware and have
> created a
>> > training demo which has 2 quizzes in it.
>> >
>> > The problem I am having is that when I run the
package only one or the
> other
>> > quiz will work. Whichever one I go to first
will work and the other
>> > will
> just
>> > show up with the summary saying 0 questions
etc.
>> >
>> > Any help or advice would be appreciated.
>> > Karen
>> >
>>
>
>

Problem with dynamically created columnchart (FB 4 and 4.5)

I have an application (written in FB4 but I've imported to FB4.5 with no difference in behaviour) which dynamically creates cartesian charts. The total column values should be the same but the user can group them according to different fields. This works fine except for one of the possible grouping options. When that is used, I can see that all the data is present in the dataprovider, but one of the groups is just not shown - or rather when you hover over the column it shows "0" as the value for that group.
This is the code I run when the HTTP query comes back:
private function gotGroupHistory():void{
    if (hsGroupHistory.lastResult.list.item is mx.utils.ObjectProxy) {
        histModelSource = new ArrayCollection;
        histModelSource.addItem(hsGroupHistory.lastResult.list.item);
    } else {
        histModelSource = hsGroupHistory.lastResult.list.item;
    var grouparray:Array=new Array();
    var cset:ColumnSet = new ColumnSet;
    cset.type="stacked";
    var csplan:LineSeries=new LineSeries();
    csplan.displayName="Target";
    csplan.yField="plan";
    for each(var thisitem:String in chartgroups) {
        var cs:ColumnSeries=new ColumnSeries();
        cs.yField=thisitem;
        cs.displayName=thisitem;
        cset.series.push(cs);
        columnchart1.series=[cset];
        columnchart1.series.push(csplan);
        columnchart1.invalidateSeriesStyles();
        columnchart1.series=columnchart1.series;
        legend1.dataProvider=columnchart1;
As I said everything appears to be correct - the data provider has the data for all the groups but just 1 of them is not displayed. The legend also shows the name of the missing group. I really cannot figure out what is going on. Can anyone suggest my next line of investigation please?
Thanks
Martin

This problem is solved after updating to IOS 7.

Problem with file created through GUI_DOWNLOAD

Hello,
I have the following code
REPORT zprueba.
START-OF-SELECTION.
TYPES: BEGIN OF t_type,
    field1(20),
    field2(20),
END OF t_type.
DATA: lt_data TYPE STANDARD TABLE OF t_type,
        ls_data TYPE t_type.
ls_data-field1 = '1'.
ls_data-field2 = 'UNO'.
APPEND ls_data TO lt_data.
CLEAR ls_data.
ls_data-field1 = '2'.
ls_data-field2 = 'DOS'.
APPEND ls_data TO lt_data.
CLEAR ls_data.
ls_data-field1 = '3'.
ls_data-field2 = 'TRES'.
APPEND ls_data TO lt_data.
CLEAR ls_data.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
*   BIN_FILESIZE                    =
      filename                        = 'C:\Users\jochavez\Desktop\Algo.txt'
   filetype                        = 'DAT'
*   APPEND                          = ' '
*   WRITE_FIELD_SEPARATOR           = ' '
*   HEADER                          = '00'
*   TRUNC_TRAILING_BLANKS           = ' '
*   WRITE_LF                        = 'X'
*   COL_SELECT                      = ' '
*   COL_SELECT_MASK                 = ' '
*   DAT_MODE                        = ' '
*   CONFIRM_OVERWRITE               = ' '
*   NO_AUTH_CHECK                   = ' '
*   CODEPAGE                        = ' '
*   IGNORE_CERR                     = ABAP_TRUE
*   REPLACEMENT                     = '#'
*   WRITE_BOM                       = ' '
*   TRUNC_TRAILING_BLANKS_EOL       = 'X'
*   WK1_N_FORMAT                    = ' '
*   WK1_N_SIZE                      = ' '
*   WK1_T_FORMAT                    = ' '
*   WK1_T_SIZE                      = ' '
*   WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
*   SHOW_TRANSFER_STATUS            = ABAP_TRUE
* IMPORTING
*   FILELENGTH                      =
    TABLES
      data_tab                        = lt_data.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
In one machine the file is like
1 UNO
2 DOS
3 TRES
In my machine it is
1 UNO2 DOS 3 TRES
As you can see all is in one line.
Both machines are Windows Vista same version, same model (hehe).
Any idea of why this differente?
Best Regards

My problem comes from report CRMD_UI_ROLE_PREPARE
This report generates a file that can be uploaded to PFCG. When I try to load the file I receive an error message. I saw the file and the generated file has the same problem.
So I create this test program to see if it is a program error or it is something wrong with my computer.
The test gave me the same result. NO carriage returns.
So I need to solve this issue to run again CRMD_UI_ROLE_PREPARE and get a correct file.
So I think it is configuration of my user or with my computer.
Any idea?
Best Regards

Problem with Quiz created in Captivate 4 imported to Captivate 5

Similar Messages

Maybe you are looking for