Problem with R3 4.6C Installation on RHEL4 x86_64

Hello Experts,
We currently have the 4.6C system on Solaris (64 Bit) and the plan is to migrate to RHEL4 x86_64. I am trying to do a vanilla install of 4.6C SR2 (4.6D EXT kernel) with Oracle 10.2.0.2 on the Linux box as the first step.
I have gone through notes 946141 and 816145 and adapted the changes mentioned there. The installation has progressed smoothly until the database creation step.
What I've completed so far:
SAP Binaries extracted successfully
Oracle Database Software installed successfully
Oracle 10.2.0.2 Patchset installed successfully
I then continue the installation with R3setup and it creates the database successfully BUT I've noticed that its creating an older version of the tablespace which causes my installation to fail at the ORADBUSR_IND_ORA phase.
I have replaced the oradbusr.sql file from the one in note 573042. I have also confirmed that the DBSIZE.TPL and DDLORA.TPL in the installation directory are copied from the Export CD and have the latest tablespace names.
The last couple of lines from the oradbusr.log are:
. Oracle Version:                     10.2.0.2.0
. Parametervalue os_authent_prefix:   OPS$
. Schema Id:                          R3
. Database User (Schema):             SAPR3
. SAP R/3 Administrator:              OPS$DW1ADM
unable to assign default tablespace to user: SAPR3
begin
ERROR at line 1:
ORA-00959: tablespace 'PSAPUSER1D' does not exist
ORA-06512: at line 90
The tablespaces created in the database so far are:
SQL> select tablespace_name from dba_tablespaces;
TABLESPACE_NAME
SYSTEM
PSAPUNDO
SYSAUX
PSAPTEMP
PSAPR3
PSAPR346C
PSAPR3USR
The last three tablespaces (PSAPR3*) are really old and do not exist in my current environment.
Any ideas on how I could get over this problem? I could create the PSAPUSER1D manually but would prefer not to do it this way.
Thanks,
Cheng

We currently have the 4.6C system on Solaris (64 Bit) and the plan is to migrate to RHEL4 x86_64. I am trying to do a vanilla install of 4.6C SR2 (4.6D EXT kernel) with Oracle 10.2.0.2 on the Linux box as the first step.
To do a migration you need to export your source system using R3load and import that exported system (heterogeneous migration). You can´s use backup/restore method due to endianess differences and you need a certified migration consultant on-site to assist you in the migration (http://service.sap.com/osdbmigration).
I have replaced the oradbusr.sql file from the one in note 573042. I have also confirmed that the DBSIZE.TPL and DDLORA.TPL in the installation directory are copied from the Export CD and have the latest tablespace names.
This is really strange - it should use the one you copied to the installation directory. Can you check if it´s using the correct one? Not that R3setup is re-copying it from the installation CD again...
Markus

Similar Messages

Problems with running HTTP-Server (opmn) on RHEL4 x86_64

I have installed Oracle 10g DB R2 on RHEL4 x86_64 and HTTP-Server from Companion CD
After running opmn appears problems:
1. The system message: "ip_conntrack: table full, dropping packet"
2. I have thousands established TCP-session on 127.0.0.1 to port 6100
And the network on my server more died than alive :-(
What is it?

Hi Hema,
There could be various things that explain this, but from your symptoms it looks like the engine is hung processing this report. This could be as simple as a PL/SQL trigger that is in an infinite loop. Anyway, a simple thing to do is to add TRACEFILE=filename&TRACEMODE=append&TRACEOPTS=TRACE_ALL onto your URL. This will create the specified file and dump information into it about what Reports is doing as it is processing your report. If it is hung in an infinite loop, you should be able to see how far it got when you kill it.
Also, you can see the status of the reports job queue by using the http://.../rwcgi60?showjobs command. If the report is executing forever, you'll see it sitting there in the job queue.
regards,
Stewart

Problem with SAPSERVER.CMD during installation, nothing happens

In the process of installing in our test environment but I seem to have problems with the Oracle 9i installation. When i double click the file sapserver.cmd nothing happens.
I have tried the workaround with renaming "symcjit.dll" and changing parameter JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m in oraparam.ini file. Then rerun installation with command "install\win32\setup.exe -J-Dsun.java2d.noddraw=true".
This time error message "Could not initialize the Java virtual machine. Program will exit!" occurred.
Can anyone please help me how to fix the problem. Thanks.

I am also facing same problem--
I have got IDES 4.7 CDs..
I am trying to install Oracle RDBMS 9.2 NT thru first CD... when I am running SAPSERVER.CMD it does nothing except showing wait pointer for few seconds.
it is actually creating three folders in TEMP folder images, jre, oui
I have tried running SAPSERVER.CMD from command prompt also but there was no luck.
When I tried to run SETUP.EXE there was same situation.
Even i tried to run setup.exe from \NT\I386 directory on command prompt with following command ...
SETUP.EXE -RESPONSEFILE E:\NT\I386\response\sapserver.rsp
but nothing could help me out...
I checked everywhere but could not find and LOG file which could explain me that what went wrong..
this is an appeal to all are techies.. plz help me..
I have tried it on two machines:
1) p4 2.66 512 ram 80+40 gb HDD 2000 server with sp4 and ie6, JRE, .NET framework 2.0
2) Dual core with 1 gb RAM 300 GB HDD 2003 Server with SP2 JRE, .NET framework 2.0
There was exactly same situation on both the machines..
Thank in advance

Trying to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

This has been fixed. Answer is that I needed to go to "Apple Software Update" and repair it. (From my Control Panel).

Problems with WAS 6.40 Installation on Oracle - Phase 11 of 34

Hello,
Problems with WAS 6.40 Installation on Oracle (Phase 11 of 34)
with the installation of the Web Application server 6,40 SR1 on a Oracle server I get in phase 11 of 34 (Create Oracle Database) the following error-message:
CJS-00084 - SQL statement or script failed. Diagnosis: Error message: ORA-12547: TNS:lost contact.
error while loading shared library: libodm9.so : cannot open shared object file: No such file or dirctory.
Best Reagrds,
Ralf Steffens

hi Ralf
i've found one composite note for Oracle <a href="https://websmp203.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001366932002">505630</a>
hope this solves...
Symptom
ORA-12547: TNS:lost contact
Brbackup, brarchive, brrestore or brconnect may terminate with errors similar to the following:
BR301E SQL error -12547 at location BrDbConnect-1
BR301E SQL error -12547 at location dbf_info_get-1
Sapdba returns the following error, for example:
SAPDBA: ORACLE error -12547 occurred while checking instance status!
The R/3 work processes or R3trans return the following error at Connect:
C *** ERROR => CONNECT failed with sql error '12547'
Other terms
TNS-12547, TNS-00517
Reason and Prerequisites
As part of the Net8 Connect, a program such as the R/3 kernel, R3trans, svrmgrl, sqlplus or ODMA establishes a connection to the Oracle database. If the connection terminates due to problems at the server end, it can result in ORA-12547.
Additional information for the error is often available in sqlnet.log. In many cases, other messages that are not reported by all tools precede ORA-12547. If ORA-12547 occurs when the ODMA accesses the old Oracle-Home during a database upgrade, for example, it may make sense to temporarily restart ORACLE_HOME on the old Oracle-Home for test purposes and then to execute sqlplus or svrmgrl.
Even if sapdba or the BR tools terminate with an ORA-12547 when calling sqlplus or svrmgrl recursively, you should, for test purposes, call sqlplus or svrmgrl manually with the operating system user that was used.
Hopefully, a more informative error message will appear in addition to ORA-12547, for example:
ld.so.1: oracleC11: fatal: relocation error: file
 /oracle/C11/817_64/libx8.so: symbol ksunsga_:
 referenced symbol not found
If you find accompanying error messages of this type, start a note search with the corresponding search terms since we are often aware of the problem and a solution may already be available. If you do not find any significant error messages or a suitable note, check the following possible causes for ORA-12547:
1. UNIX: Incorrectly linked Oracle tools
2. UNIX: Problems with XPG4 compliance and s-bit
3. Too many requests to the listener at the same time
4. HP-UX, Oracle 8.1: Missing OS patch
5. Use of CRYPTO parameters in sqlnet.ora
6. AIX: I/O Async is deactivated
7. Resource problems
8. The CONNECT_TIMEOUT_LISTENER parameter in listener.ora is too low
9. Activated Oracle trace
10. UNIX: Incorrect oracle executable authorization
11. SOLARIS: LD_LIBRARY_PATH set when you call ODMA
12. AIX: Problem with post/wait kernel enhancement
13. UNIX: Problems with the libobk library
14. SOLARIS: Incorrect search sequence in the path variable
15. UNIX: Conflicts between 32-bit and 64-bit files
Solution
1. Relink the Oracle software as ora<sid> with
cd $ORACLE_HOME/rdbms/lib
make -f ins_rdbms.mk install
 or
relink all
1. See Note 88884.
2. If individual work processes terminate with ORA-12547 when you start an R/3 instance, See Note 131561.
3. See Note 399610.
4. You can set security parameters that begin with SQLNET.CRYPTO_ in sqlnet.ora as part of the Advanced Security Option. Oracle releases < 8.1.7 cannot process these parameters correctly and result in ORA-12547. In this case, delete these types of parameters from sqlnet.ora.
5. If I/O is deactivated on AIX Async, the Net8 Connect fails with ORA-12547. In this case, activate I/O Async by using smitty.
6. Insufficient resources such as available memory on the database server can cause ORA-12547. For more information, see 384839.
7. In individual cases, it may make sense to increase the CONNECT_TIMEOUT_LISTENER parameter in listener.ora (for example, by 5 seconds, so from 10 to 15). Although a value of 10 seconds should usually be sufficient to establish a connection.
8. Delete the log files written by the Oracle trace in accordance with Note 92537.
9. Check to see whether the executable in $ORACLE_HOME/bin has the "rwsr-s--x" authorizations and the ora<sid> owner and correct this if necessary.
10. If you call ODMA on SOLARIS as part of a database upgrade and if LD_LIBRARY_PATH is set explicitly (on the lib directory of the target release), calling the old Oracle software through ODMA may fail with ORA-12547. If you use the old ORACLE_HOME to list sqlplus or svrmgrl, you get the following error:
ld.so.1: oracle<sid>: fatal: relocation error:
 file /oracle/<sid>/817_64/libx8.so: symbol ksunsga_:
 referenced symbol not found
ORA-12547: TNS:lost contact
 In this case, permanently delete LD_LIBRARY_PATH from the environment. This does not have any negative effects since the libraries are automatically found in the correct directories as of Oracle 8.1.
 If problems occur with the post/wait extension on AIX, the following type of errors will be displayed:
exec(): 0509-036 Cannot load program oracleC11 because of the
following errors:
 0509-130 Symbol resolution failed for oracle because:
 0509-136 Symbol pw_post (number 2524) is not exported
 from dependent module /unix.
 0509-136 Symbol pw_wait (number 2525) is not exported
 from dependent module /unix.
 0509-136 Symbol pw_config (number 2526) is not exported
 from dependent module /unix.
 0509-192 Examine .loader section symbols with the
 'dump -Tv' command.
ORA-12547: TNS:lost contact
1. If the libobk library was created incorrectly, the following type of errors may occur:
/oracle/C11/817_64/bin/oracle: /sbin/loader:
 Fatal Error: Cannot map library libobk.so
/usr/lib/pa20_64/dld.sl: Unable to find library
 '/oracle/C11/lib64/libobk.sl
exec(): 0509-036 Cannot load program oracleC11 because of the
 following errors:
0509-150 Dependent module /oracle/C11/817_64/lib/libobk.a(shr.o)
 could not be loaded.
0509-152 Member shr.o is not found in archive
ORA-12547: TNS:lost contact
 Check to see whether libobk exists and, if it is a link, that it points to a valid object. Note 142635 contains more information about this. The libobk link may point to this if a libsbtsh8.* file exists in the Oracle library directory. If you are using a third-party Backint tool, contact the relevant supplier, since libobk often has to point to a backint-specific library.
1. If an error such as
ld.so.1: ./svrmgrl: fatal: libucb.so.1: open failed:
 No such file or directory
ORA-12547: TNS:lost contact
 occurs, the PATH has probably been set incorrectly. For more information, see Note 44361.
1. If an error such as
ld.so.1: oracle<sid>: fatal: <library> wrong ELF class: ELFCLASS64
ORA-12547: TNS:lost contact
 concerning "wrong ELF class" occurs, check whether the <library> mistakenly has a different bit size than the tool that was called. You can determine this using
file <library>
file <tool>
 All the files involved must uniformly be either 32-bit or 64-bit.

Regards
Arunkumar

Problems with Java 1.5_X installs help required.

Hi All,
Having problems with multiple machines with Java 1.5_X installs, the install ppears to complete successfully, and the version checking on the Java Website says that Java is installed however the checking of the Java Virtual Machine using the webpage on the Java site fails, ends up with a red cross in the right hand corner and opening the java console receive this list of messages:
load: class testvm2/Main.class not found.
java.lang.ClassNotFoundException: testvm2.Main.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Have tried uninstalling and reinstalling to no effect, have tried uninsalling and reinstalling IE to no effect. Please note the problem does not happen when I install 1.6 versions on the same machine but unfortunately I need to get 1.5 working on these machines.
Any help is appreciated.

This is silly. Just because you don't know Vuze doesn't mean there's no problem with this update. My friends are having the same issue, of course we are looking at possible problem from Vuze's part but we cannot really say this update has 100% nothing to do with Vuze's launch failure, can we?
P.S. Since Vuze is not banned by law, it's still legal to use it. It's up to people if they want to use it for good or bad.
dogquake

Problems with Cluster Ready Service installation (RAC) in Oracle 10g R1

Hello
I have got problems with this installation. I am starting Oracle user
At the end of the installation I get a mesage when all Configuration Assistants are failed
I have got 2 computers with Windows 2000 PRO, two networks (private and public)
As a shared disk I use one external disk (with USB) attached to one computer.
What to do here?
please for a reply
Martin
PROT-1: Failed to initialize ocrconfig
SCLS error 1 reading current privileges.
Internal Error Information:
Category: 1234
Operation: scls_iddb_has_privgrp_by_name
Location: NetLocalGrou
Other: get local group failed
Dep: 0
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
ignoring upgrade failure of ocr(-1)
failed to configure Oracle Cluster Registry with CLSCFG, ret 102
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Launched configuration assistant 'Oracle Notification Server Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/racgons.exe add_config migi:4948'
Start output from spawned process:
End output from spawned process.
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Launched configuration assistant 'Oracle Private Interconnect Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/oifcfg.exe setif -global "public"/10.0.0.0:cluster_interconnect "public"/192.168.1.0:public'
Start output from spawned process:
PRIF-12: failed to initialize cluster support services
End output from spawned process.
Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
PRIF-12: failed to initialize cluster support services
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Error:*** Alert: Some of the configuration assistants failed. However these are optional assistants, so they are not required for the correct configuration of your system. If you want to try to run those assistants again, select the failed assistants and click the 'Retry' button. ***
User Selected: Yes/OK
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Cluster Ready Services Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/install/crssetup.config.bat'

Also you clusterware installation installs to an ORACLE_HOME.
Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
Sebastian

Is Anyone Else Having Problems With Key Chains After Installation?

My installation went ok but I'm having all kinds of problems with Key Chains now that I didn't before. In addition to them being corrupted, it won't let me save corrected names and passwords even when it asks for them.

Is there a fix if you don't have your Key Chains folder from before the 10.6 installation? I keep having to re-type my MobileMe and student Gmail passwords in Mail, and if I check remember password in Key Chain, I keep having to re-type the password until I uncheck the box, but then that means I have re-type the password every time I send an email or put the computer to sleep.
Also, Keychain Access's First Aid shows that there are no problems whatsoever. When I click on MobileMe in my System Preferences I get 8 or so consecutive errors stating "Keychain Error. There was a problem saving to your keychain. Try again or use Keychain Access to verify your keychain." When I look at my login within Keychain Access, it says my MobileMe keychain is restricted (even after entering my administrator password).

Fixing problems with the Microsoft Windows Installer Cleanup Utility

Sorry for the long subject. I am having what appear to be common problems with my acrobat reader for which the only solution appears to be using the microsoft windows installer cleanup thing.
I have acheived downloading the utility to my desktop but when I try to run it I get an error message as follows:
Across the top of the message it says 'WINDOWS SCRIPT HOST' and in the box it says:
Script: C:\DOCUMEN~1\Karen\LOCAL~1\Temp\IXP000.TMP\StartMsi.vbs
Line: 1
Char: 1
Error: The specified module could not be found
Code: 800700E
Source: (Null)
Does anyone have any clues as to where I can go from here as I am stuck with a program I can neither use or uninstall, and a reascue plan that doesn't want to cooperate either. And please treat me like a 2 yr old with the technical stuff. Thanks. :-)
Karen

Can you try to download it again, perhaps to the C:\ drive rather than the Desktop? Delete the Desktop download, then open Windows Explorer, and run the installer from the C:\ drive.
P.S. do you have administrative privileges on your system?

Is there a problem with the Itunes Windows Installer Programme?

The reason I ask is because I had a perfectly working Itunes programme on my external hard drive, from which I then deleted all the double ups of songs I had and then could not gain auto. updates of the dsongs I wished to add to itunes.
It said to reinstall Itunes, which I tried to do and since this time the installation stops when installing the registry components and the following message appears -
There is a problem with the Windows Installer Package. A programme required for this to install could not be run. Comntact your support personall or package provider.
Can anyone help please?
Thank you in advance for any help forwarded
MrG
P.S. - Not that well versed in computer speak, so laymans terms welcomed.

This message often relates to a problem with Apple software update.
Go to Add remove programs and find Apple Software update. Try repairing it.
Select Change>>repair.
That probably will not work
Then try uninstalling any instance you find of Apple Software update. That probably will not work either.
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
http://support.microsoft.com/kb/290301/
To run the program – All Programs>>Windows Install Cleanup
Remove any instance you find of Apple software update with the cleanup utility.
Download a fresh copy of the iTunes installer and save it on your desktop.
http://www.apple.com/itunes/download/
Restart your computer and try installing iTunes.

Problem with New HDD and installation of Qosmio Player

Hi All,
Hope someone can help, I have had my Qosmio for 2 1/2 years now and recently had a problem with the hard disk. I decided to replace the hard disk as this was the quickest solution. The problem I have now is that I cannot receive TV on media center. I was trying to install qosmio player on the HDD to see if it made any difference but when I run the recovery disk supplied the software tells me that there is not enough disk space!!. The laptop came with a 60G hard disk and the new HDD made by the same manufacturer is a 150GB, can anyone help me out with this one would be appreciated.
Thanks
ED.

Qosimo F10.
Sorry my previous entry was garbled. I upgraded the HDD to 120, could not get the Qosimo player to reload, same error, No space on HDD.
I then upgraded to Vista and downloaded the new Vista Qosimo drivers, created the ISO image and booted from it. Still did not work.

Satellite Pro A120: I have problems with the graphics driver installation for W2k

I have installed windows 2000 on an A120 the system is fully service packed and up to date before I even begin installing the required drivers I am unable to restart the system. Once I install the drivers as recommended I have problems with the graphics driver as it will not install because it requires a restart and then I am unable to install any new programs that require a restart as the driver has not installed correctly.
The laptop is a A120 Pro, 1 week old and came with XP home, because of this toshiba will not offer me support as I have changed the O/S even though they obviously support 2000 on this laptop as they supply the drivers.
Any ideas would be greatly appreciated.

the reason the driver is not working is down to a problem with the windows 2000 not having the ability to reboot.
When you select restart the system appears to power down then stays switched on. Now if I try to install software I get an error saying that the system needs to complete a restart to finish the install of the driver.
The restart problem happens as soon as win2k is installed as although I have now shipped the laptop to the sales team I have another one which has just had a clean install of win2k without any drivers and the fault is present on this one.
I am thinking it could be to do with power management but I'm not to sure as I have never come across this as I normally purchase machines which accept just about any O/S.

Problem with nokia e51 plugin installation

hey guys!
i have a problem concerning the installation of the plugin for the usage of the nokia e51 with apple isync. (nokia_e51_1v1.dmg)
i have mac osx 10.4.11 and isync 2.4.
when i tried to install the plugin i got the message that i have to upgrade to the latest version of isync using apple software update. i am a little bit confused cause my system actually matchs the requirements for the installation.
at the nokia website is stated that the minimum requirements are max osx 10.4.9 and isync 2.4 to use the plugin.
could somebody please help!?
Solved!
Go to Solution.

hi!
i have the answer to the problem. i had moved the isync application into a subfolder. after i had removed the application into the application main folder the installation worked.
thanks a lot anyway ...
cheers
daniel

Problems with EPM 11.1 installation

Hi,
I started the new installation of EPM 11.1 verion on my laptop with below products.
- shared services
- epm architect
- worksapce
- hfm
- reporting & analysis (financial reporting & web analysis)
I configured above components and see no major issues either from the EMP configurator panel or from logs. At the end of the process, I can log into shared services and workspace. However, from workspace, I cannot see HFM application from navigation as that in 9.3.1 version. I then tried to re-install those products and tried to configure a couple of times (actually more then 5 times). Even worse, cannot log into workspace (I encountered error msgs like auth_cssexception or gsm cannot acquire lsm).
FYI. Everytime I configured all components, I could successully log into shared services and see those products sitting under //project/foundation/shared services/epm system registry; however, in //project/foundation/shared services/registration, i have only shared service under applications folder and HUB-9.5.0 under products folder.
Is there anything I did wrong or I missed? Please help. Many thanks.

Hi, got the problem solved after running EPM system configuration as below suggestion from installation guide.
Can open HFM application from workspace now.
If you have already configured Oracle Enterprise Performance Management Workspace, Fusion
Edition and you deploy any additional products that are in EPM Workspace, you must run EPM
System Configurator again and select the EPM Workspace “Configure Web Server” task. In this
release, the following products and components are integrated in EPM Workspace:
● Reporting and Analysis
● Oracle Hyperion Planning, Fusion Edition
● Oracle Hyperion Financial Management, Fusion Edition
● Oracle Hyperion EPM Architect, Fusion Edition
● Oracle Hyperion Performance Scorecard, Fusion Edition
● Oracle Hyperion Profitability and Cost Management, Fusion Edition
● Hyperion Calculation Manager

Problem with minisap 4.6 installation..Please help..URGENT!!

Hi,
Can somebody help me with this problem? when i start to install the minisap into my windows XP, i encounter this problem. may i know what shoud i put into the field?
<img src="http://i35.photobucket.com/albums/d194/keyepvc/minisap1.jpg">
This is the next step after the above screen. May i know what to enter into the field?
<img src="http://i35.photobucket.com/albums/d194/keyepvc/minisap2.jpg">
Or is there anything wrong with my PC? btw, i just reformat my window.
Thank you.. Your help is much appreciated.

Hi,
Check the link below links
http://www.christianfeichtner.com/documents/install_mbs.html
Mini SAP Installation
http://www.sap-img.com/basis/common-mini-sap-installation-question-and-answers.htm
Hope this will help u..
Regards,
Omkar.

Problem with R3 4.6C Installation on RHEL4 x86_64

Similar Messages

Maybe you are looking for