Problem with radio manual search

Hi,
problem searching radio wave, some of them i'pod can find automatic, but in manual search i can make step by 0.2 only, like 99.9 fm and then goes only 100.1, so can't use my favorite radio 101.00 because after 100.09 goes it 101.1 and don't play it. Ether in automatic search waves can't be found.
what is a solution in this case?

Hi Ravi,
As a starting point, search <a href="http://service.sap.com/notes">SAP Notes</a> with the search criteria "CRMD_ORDER_INDEX performance".
Regards,
Patrick.

Similar Messages

Problems with radio stations on Apple TV

Anyone having problems with radio stations on Apple TV (2nd gen)? Since this last weekend the unit just searches for radio stations but no luck. Internet connection is good, home zone in operation. Anyone having the same problems?

Me too on ATV1. Problem since 3/26/14. See https://discussions.apple.com/message/25316269

Has anyone had a problem with the spotlight search not working sometimes?

Has anyone had a problem with their "spotlight search" not working? If I restart the phone it will work for a few days then not work again.

It's more likely the OP's router. I have a wifi only iPad 2, yet location services work just fine on my iPad. If I open maps, my location is found quite nicely. I have seen that some routers do not provide location services and I suspect the OP has such a router.

Problem with full-text search in RH8

Hi All,
I've just upgraded from RH6 to RH8 (laptop running Windows XP SP3; RH6 still present on the computer but the RH8 setup program did not seem to have a problem with that: identified an earlier version was present, asked for its serial number, and then proceeded).
RH8 is working just fine, except for one thing: in the WebHelp output I generate, the Search tab displays: "Error: Failed to initialize database".
As a matter of fact, the generation details in RH8 output view state:
Processing Full-text-search data...
Finished processing Full-Text-Search data in 0 sec(s)
This is the case for legacy projects that RH8 upgraded from RH6, but also when I create a project from scratch in RH8.
Now, to add to my confusion, before buying RH8, I had downloaded RH8 trial version and installed it on a spare computer (so it would not interfere with my RH6 installation and projects). The tests with this version were OK (hence the decision to buy the upgrade), and guess what: there was no problem whatsoever with full-text search, neither on legacy projects nor on new projects.
So before I go into the pains of uninstalling / reinstalling (hello registry, it's me again, trying to clean things up ;-), I'd like to know if anyone has any idea why this is happening.
Just to be clear: The RH8 version I bought and installed was a new download, distinct from the initial trial download.
The 3 differences between the trial version and the current working version are:
Trial was on a Vista computer (working version is on XP SP3)
Trial did not have RH6 present on the computer
Trial was version 8.0.0.203, whereas the working version is 8.0.2.208 (immediately after it was installed, RH prompted me to install the updates)
Thanks in advance for any help or advice.

Hi All,
Just for the record, IT people here were eventually able to have RH8 full-text search feature working on my laptop by:
1/ Installing an XP virtual machine from scratch, and then installing RH8 on it (we created a small project and generated the webhelp output, just to make sure the search feature did work in that environment).
2/ Using a software virtualization application to capture that RH8 install and deploy it on my laptop.
The problem is not solved, because we still don't know what caused it (conflicting DLLs?), but it looks like we have a workaround - although certainly not a quick and easy one ;-)

Recruiting problem with the candidate search by trex with questionnaires

Hi Gurus,
I am trying to search candidates using trex in recruiting by candidate_questionnaires but the trex does not show any result. How can I solve it?
When candidates register theirselves on internet, they complete questionnaires that I have added in the apllication wizard.
But the problem starts when I want to search candidates by the answers that they have complete in this questionnaire. So I select the criteria search candidate questionnaire, then I select the questionnaire and then the answer and I run the searh. I know that the results shown are always about others requisitions and not the one that I am doing the search. But in my case candidates are assigned in other requisition with the same process template so I do not know where is the problem, because other sort of search works fine. This is the only one that it does not work.
In addition, I have run the report RCF_CHECK_SEARCH_SETTINGS but the result is that all the parameters are fine except that I have not implement the badi HRAHAP00_FOLLOW_UP_SES. May I have to implement?
Moreover I have seen that when I select the answer to search, any operator (element of selection mask) is assigned but I have read that it is correct because I am using the search profile "int_cand" with the category "candidate_document" that it use in the mask search candidate_questionnaire.
In conclusion, I don't know how I can solve this problem with trex? Any idea?
Thanks in advance,
Juanjo Garcin.

I've already done it.
Do you think this will help?
I doubt that Apple will listen to us. Users with a problem that occurs quite a lot.

Nokia 5800. Headphone problems with Radio (1 earph...

Hi, I have a trouble with radio.
MP3: works both earphones, Radio: left - works OK, right - very quietly.
Can you help me?

This isn't the solution but such an issue reported earlier...
/t5/Nseries-and-S60-Smartphones/Nokia-5800-Radio-Problem/m-p/627245/highlight/true#M193050

Problems with radio, not save my choice

I'm creating a radio-based artist. Listening to music on this radio. Press the "I like" I continue to listen to music. This song appears again. But my choice is not saved.And it always happens on any radio. At the same android phone. How can I fix it? Radio listening is not possible

OK this is Cormacin Texas - these idiots have put me through the hoops, effectively locking me out of the support forum. Anyway I've solved the problem - it took 3.5 hours, involved a trip to the Genius bar at the local Apple store, and one and a half hours escalating through the dial-in help support - which was about the only thing the Genius was good for.
What you need to know is:
1. Apple are having problems with their servers, but have not published the fact - we've all wasted a lot of time because these guys want to keep their Customer Sat scores high, I guess. (I'm starting to feel like one of their Chinese factory workers!)
2. This server problem is compounded by the fact that it only affects a few random servers
3. It in turn can lead to problems sending emails which require you to change your Apple Mail password, and in my case surgically remove bad records for various hidden email and library folders. (Good luck with that!)
So, a problem that they hide, a knock-on set of work that the problem indirectly causes, which they also hide, and a support structure that is geared for hardware, not the services that they are now selling.
My suggestion is to change your mail password using the web (icloud.com) access to Mail and see if that works. After that, remove and reset up your Apple email (Preferences) and pray that you don't have to join endless telephone answering lines where some of the folks will cut you off because they can't be arsed.
The two guys that finally helped me were brilliant, knew their stuff and could not have done a better job. The key guy was Danny - if you get him, your golden!

I have problem with my network searching . Please help me how to search my mobile network?

y

Hi, Amit Kumar pradhan.
Thank you for visiting Apple Support Communities.
It sounds like you are experiencing an issue with your iPhone searching for service. If you have not resolved this issue, I would recommend trying the troubleshooting steps in the article below.
If you see No Service or Searching in the status bar of your iPhone or iPad
http://support.apple.com/kb/ts4429
Cheers,
Jason H.

Communications problem with radio link

A customer has a network composed from a LAN shared-media (with hub 8-ports), a router linked to three modems wich link to three 9.6 kbps radio links. These radio links have linked to another three modems and PC remotes. The problem is that in LAN side, we communicate with only one remote PC, and the other two remote PC can't do it. What could be the source of the problem? Maybe CSMA/CD?
Thanks for the help.
Filippo Ceruti

Hi,
r these three pc's are in the same subnet... or did u done any routing in the router...... Just chk whether u r getting atleast the mac-entries of those PC in router......
rgs

Problem with radio in Nokia5800 52.0.007 .

Hello,
I have installed firmware 52.0.007.
when I am switching radio stations radio application freezes and I am unable to turn radio off with taskmanager. I must turn off and turn on my phone.
What should I do with this?

I am not sure if it is RDS related - I tried to disable RDS but there is no possibility to do this.
user ITEXNZ in thread /t5/Software-Updates/Nokia-5800-updated-to-V40-0-005-Radio-RDS/td-p/607102 described exactly my problem but with one difference I can't close or 'kill' the app using Taskman. Radio app still results in being frozen and unresponsive - only a phone switch off/on will get it working again.

Has anyone else had a problem with the Artist search buttons search peramiters changing after Apples latest ipod update ? I synced my ipod touch recently and it came up with a message saying a new update was available for the ipod but might take an hour .

Last time I synced my ipod touch it ofered me an update for the pod that could take about an hour , I did it and now it doesnt search properly . When I used the Artist tab at the bottom of my ipod before it would find every single song on the ipod by that artist (ie it searched by TRACK Artist) . Now it only find the songs by any given artist that are on Albums by that Artist (ie it searches by ALBUM Artist) What that means is it wont find any song by any Artist on a Various Artist CD . HAS ANYNOE ELSE GOT THIS PROBLEM OR A SOLUTION?

Hi AP_In_Surbiton,
I am really sorry that you have had so much trouble getting your Caller ID up and going. I'll be happy to help you out with this and get it working for you.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Problem with respect to Search Help AND Dialog Progg

Dear All,
I have a screen 0100, wherein Input-output field 'Veh_num' is created.
Also there are another Input-output fields ( S_Date and S_time).
Now end-user just displays records in screen when puts Veh_num(Vehicle number) in the field and clicks DISPLAY.
Now problem arises when two Veh_NUM(Vehicle numbers) are present on same date but different on different time.
i created a SEARCH HELP for the input-out field VEH_NUM(vehecle number).............where both records are displayed. But when user select any record of the two, always only a particular record is displayed on the screen.
I Think the problem lies when User selects a row from the search help, Only VEH_NUM gets transferred to the screen. I think If along with the Vehicle number, If S_time is also transferred then the problem will get solved.
Search Help has 1 input(Veh_num).......and 3 Output fields( Veh_num, S_Date and S_time.).
Pls suggest.
Thanks in advance

hi dsilva,
Is ur Requirement is, that u need to select vehicle number and values corresponding to that
number i,e Date and Time should get displayed on the screen?.
Use Dictionary Fields if U Have, to define ur input/output fields
OR.
follow the below steps.
1) First Check the serach help which u have created works as per ur requirement.
2) The screen which u have designed has an input field(Vehicle Number).U may Have taken the
field from Progarm or any other variable to define it.Don't do that.
3) First Create a structure from SE11 and Define fields Vehicle Number and Date and Time.
4) Assign Search help to the field Vehicle Number in the Structure.
5) Use this Struture in your screen desigining.
6) Then it automatically picks up the values and dislplays on the screen for a corresponding vehicle number.

Problems with collation when searching

Hi,
We have set up our database with the collation Danish_Norwegian_CI_AS, but we are having trouble when searching for data containing 'AA'. In order to get the rows out, we need to change the collation to eg. SQL_Latin1_General_CP1_CI_AS
I have set up a fiddle, to show the problem, please run each select and match the result:
http://sqlfiddle.com/#!6/4218c/10/0
Does anyone know how to fix this without changing the server collation.
Thanks
H_H

A little searching reveals that AA has a special meaning in Danish:
AA and danish collation
like AA
Note that you can dynamically set the collation for sorting or comparision purposes using the collate clause in your query. While we're at it, collation is set at the COLUMN level, though higher level settings exist but only have an effect
in certain circumstances. Changing the server collation will not solve your problem since it will not affect your existing databases, tables, and columns within those tables. And be careful about changing collation since it will affect sorting.

I am having problems with the Mail search engine.

Here is what is happening. When I attempt to search my Mac Mail sent folders using the Mac Mail's search function, the message window simply goes blank after I enter the second letter into the space next to the magnifying glass icon. This only happens when I try to search my sent folders. It will still search my received mail folders just fine.
I have tried rebuilding the Spotlight index, and also rebuilding the Mac Mail database. Neither worked.
I have read some suggestions that one use Terminal with a command such as sudo hdutil -i on "/Volumes/Macintosh HD.
Although I am loathe to type anything into Terminal, I tried to enter this command, then it asks me for my administrator password, and then refuses to allow me to enter it, so that is an entirely new problem that I would have to figure out.
I am using OS 10.6.8 on a MacBook Pro.
What if I just reinstall Mac Mail? Would that work?
Thanks for your help.

Spam filters work in different ways on different computers and different email providers, so why one message does go to the Spam/Bulk mailbox, and why it doesn't all depends on the Spam filtering criteria that that provider or product set up.
Any messages you want that appear in the Bulk Mailbox, you would be best off learning how to train the software or the email provider that it's good mail and not spam. Once you do that, the emails that you've been flagging as good emails will begin to come back into your normal email boxes.
If you still need more help with this, please provide:
1) The email software you're using on your computer, and the system software on your computer -- example: Outlook 2010 and Windows 7
2) The email provider you're having trouble with -- example: yahoo mail, a work exchange email account

Problem with Radio Button

Dear Expert,
I had a problem while using the syntax SUBMIT.
I created a report which displays in Grid. In output we have Material Number, Plant, Storage Location, Date.
By clicking the Material Number, I am submitting to RM07MLBD (MB5B) with material number, plant, storage location and selection date. But some times when clicking the material number, its going to dump giving as "More than one radio button active"
I can call the Transaction by Call Transaction MB5B, But i need to send the Date also. When sending the Storage Location, in MB5B Transaction we had to activate the Stock Type (Storage Locatin/Batch Lock) Radio Button. But giving the dump.
Please help me to solve this issue.
Kindly give me any other way to call MB5B transaction.
Thanks & Regards,
Srini

Hi,
you will find something related infor at,
Submit with exorting list to memory and return
also in program RM07MLBD, below is the decalaration of the radio buttons. check if you are passing correct values etc..
using clear statement properly etc...
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS LGBST LIKE AM07M-LGBST RADIOBUTTON GROUP BART DEFAULT 'X'.
SELECTION-SCREEN COMMENT 4(50) TEXT-010 FOR FIELD LGBST.
Text-010: Lagerort-/Chargenbestand
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS BWBST LIKE AM07M-BWBST RADIOBUTTON GROUP BART.
SELECTION-SCREEN COMMENT 4(50) TEXT-011 FOR FIELD BWBST.
Text-011: bewerteter Bestand
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS SBBST LIKE AM07M-SBBST RADIOBUTTON GROUP BART.
SELECTION-SCREEN COMMENT 4(50) TEXT-012 FOR FIELD SBBST.
Text-012: Sonderbestand
SELECTION-SCREEN END OF LINE.
Thanks,
Chandra

Problem with radio manual search

Similar Messages

Maybe you are looking for