Problem with RD-XV47 HDD/DVD recorder

I've baught this HDD/VCR/DVD recoder and I am faced with the following problem :
I have not found how to record a progam while watching an other program.
Usualy there is on the remote control a key allowing to switch between TV and Recorder, I have not found such a key yet on Toshiba recorder.
Any help will be welcome
Thanks
Edgar

*> {quote:title=DennisFarina wrote:}{quote}Sorry, sounds maybe stupid from me, but did you already checked the MANUAL? Sometimes there are not just funny stories in there, there could also be the functions of your electronical device described you have BOUGHT.*
>
> *Please read the manual and then, IF YOU REALLY DON`t know further, come here back.*
>
> **Hi Dennis*,*
I am back and I do not see lot of help from you.
I did not feel offended at first, but now I am wondering what allow you to give me this reply.X-(
Do not hesitate to point to me where I can find the answer to my problem in Toshiba manual.

Similar Messages

Problem with iDVD - cannot burn DVD.

Problem with iDVD - cannot burn DVD.
Self has a MacBook Pro, which al new software.
My problem is, when my burn a slideshow, prop process ever before burning.
Box show: Multiflexing and burning: write Lead-in, then the process stops and ejects the disc.
I have burn a Movie test – no problems.
Self use Verbatim DVD-R
Who can help - what should I do?

How did you create the slideshow and get it in iDVD?
As a general comment try following this workflow to separate the encoding and burning processes:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Problem with showing a group of records in dynamic page (PLS-00428 error)

Hi
I have problems with viewing a group of records from db. I've created Page, which "Page Type" attribute is "PL/SQL". In "PL/SQL Code" field, I've written very simple SQL query: "SELECT * FROM PORTAL_DEMO.EMP ;"
I'd like to generate HTML table with it's result. Unfortunately, every time I get the same Exception:
Error 30584: DBMS_SQL has raised an unhandled exception. ORA-06550: line 1, column 7: PLS-00428: an INTO clause is expected in this SELECT statement
Is it necessary to write a COURSOR (and use HTP function) to realize this functionality? I succeed, trying this way - but it is very uncomfortable ( a lot of code ).
What I have done in wrong way?
Please help me.
Best regards
Mario

How do I handle this?

A few months ago I bought an imac 27 inch late 2013 ... ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ...

a few months ago I bought an imac 27 inch late 2013 .. §16GB - and flash memory) - 3,3 Ghz Intel Core 15
ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ... it is not a HDD problem, because it occurs with my 3TB WD HDD (Time Machine), my 1TB WD and 1TB IOMEGA
any one have a solution? anyone dealt with this problem in the apple care program?

You are still under warranty and/or have AppleCare. Call them. Let them deal w/it.

Problem with restoring my HDD from .dmg image

Hello,
I encountered a problem with boot camp which couln't make a new partition for windows, because it couldn't move some files. It was a problem of defragmentation which i found surprisingly hard to solve. I'm a new mac user, and i was unable to find any defragmentation utility. Even the boot camp ask me to make and image of HDD, reformat it, and then restore from image. It was quite easy when i was reading it but after all i end up with new instalation of MacOS X without access to my files stored on HDD image.
Here's what i did:
1. I made images of HDD and and partition. To make images smaller i previously copied all of my multimedia files to PC. Images were created as read only, not compressed. They were stored on PC
2. I have used disc utility after booting up from MacOS X CD, and made a new partition. It's name is the same as the one i made image from.
3. Now it's the point when i should restore my partition from image but i encountered some problems. I copied images to mac again and was trying to restore partition from it but disc utility said it doesn't have any checksums or something like that. I read that it was a problem of verifying image with disc utility (the first button on the upper left side called verify.) It have checked image and made checksums but i still was unable to restore partition from it.
Now, i know it might be silly to try restore HD from image on the same HD but shouldn't it shows some oder errors? After booting up from CD i can't connect to PC to browse it's resources and writing address (http://pcname/folder/partition.dmg) in source line in restore tab does not do anything.
Is the only solution to connect a firewire hard drive to my mac with images on it? Or it is a problem with my images (making image process didn't showed any errors with HDD image and partition image).
Moreover i cant access those images on my MBP cos it's says that there are no mountable file system. Does it means that this image is bad?
Please help, I'm running out of options as i don't have firewire HDD and i'm really annoyed cos things like defragmentation are so easy on Windows and i don't get it why it's must be so complicated on Mac
Sincerely
PS sorry for my english
Message was edited by: pazera

*It said that my image don't have scan information and it needs to be imagescanned.

Problem with "The Movies" game DVD

Ok, here is my problem.
I bought the game "The Movies", at first it was working fine, but one evening, I tried to upload a movie and it just didn't do it. I tried 3 or 4 times, but I could never upload my movie.
So I stop trying and the day after when I tried to play, I put my DVD in my computer, when I tryed to play, it says put the DVD in the computer, but the DVD was already in, so I took it out, cleaned it and put it back, but then the DVD never appeared on the desktop.
I tried many other DVD/CD and everything works just fine.
Then I delete everything from the game (maybe I shouldn't have) and tried again, but nothing.
Later I learn that a Flip4Mac update was causing some problem with the game and I did something when installing a mod, I had the french version, but the .txt in the mod was in english, so I add, the english (en-UK) in a file.
Now, I rebought the game + the expansion (The Movies + The Movies Stunts & Effects, the english version this time) and the same thing is going on, the "The Movies" DVD won't appear on the desktop, but when I put "Stunts & Effects" in it works fine.
What can I do?
Please help.

"I tried to upload a movie and it just didn't do it. I"
How much free drive is on your Mac? Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better.
Boot from your restore disk and make sure the boot disk is free of errors. Restart your Mac while holding down the C key, pressing the power button and inserting your restore disk all at the same time. An Installer window will open, but do not proceed with any installations. Instead, from the Menu Bar, select Utilities/Disk Utility. In the Disk Utility window click First Aid, and then click Verify. If Disk Utility reports errors, click Repair. When Disk Utility is finished, from the Menu Bar, select Utilities/Startup Disk. Select MacintoshHD 10.x.x and click Restart.
Carolyn

Problem rec FCP movie to dvd recorder

Tried to record a FCP3 movie to a dvd recorder but it came up with a warning that "this recording is not allowed". The movie is one I cut on FCP and exported to my mini-dv deck. It transfers fine to VHS, but not to dvd recorder. Any comments appreciated.

The FCP movie is entirely original, edited from 5 hours of mini-DV tapes from my camcorder, and exported to a fresh mini-DV tape. So there's no copyright possiblities.
It's a Sylvania, a friend of mine's, I wanted to burn a couple of DVD's quickly rather than the usual 6 hrs or so on my G4.
It seems odd, don't know why his dvr didn't want to recognize the source tape.

Premere CC Capture settings with Pinnacle Dazzle HD DVD Recorder

Can I use the Pinnacle Dazzle HD DVD Recorder to transfer my old DV tape to Premiere CC to edit?
I see a dazzle in the drop down capture window, but nothing comes in the capture window when I play back the video,
the same thing happens with old VHS tape.
I am using Windows 8.1

Found an old thread from when I was setting up this computer for this a few months back ... for a "modern" Windows (7/8) you need a Firewire 800 port on the computer, the 9-pin squarish-rectangle one, not the earlier 6-pin narrow horizontal port with a v-out on one side. The cameras nearly all have the little " iLink" style receptacle, a small 4-pin metal fitting with a small divot in the middle of one long side. You need a 4-pin to 9-pin cord to connect to the computer, and putting any combo involving a 6-pin plug & adapters will not work. There's a little Vantec PCIe card from Newegg I got that had the right connection and installed easily, for $34 USD.
http://www.newegg.com/Product/Product.aspx?Item=N82E16815287011
This worked perfectly as soon as I had the correct cord ... 4-pin to 9-pin.
However, someone else showed how to work through Window's arcane system to get to a Legacy Driver option ... and once I'd rolled back the Firewire controller to the Legacy driver, any old cord would work to either the 6-pin Firewire 400 or 9-pin Firewire 800 port.
Legacy driver is found in Win7 through:
Control Panel/Device Manager/IEE1394 Bus Host Controllers/Properties/Driver/Rollback Driver/ and a couple other steps. But just for you ... I found the Windows 8 page from Microsoft on how to get legacy IEE1394 drivers that should help you:
I hope in all the above data-dumping you'll find what you need to get this working.
Neil

I need help with the Pinnacle Dazzle DVD recording software. Please help :D

I have recently bought a Platinum Pinnacle Dazzle DVD Recorder, this device allows me to record gameplay from my PS3 and put it onto my iMac (Capture Card) I nought the Windows version of the software and I need the iMac compatible one but I don't want to go into the shop and spend another £50 on it when I already have the Hardware. Does anyone use Dazzle too? To record their gameplay.
All I need is a Dazzle DVC100 Driver to help run the hardware. I have it connected and it all works, just need to view it on my iMac now. Any advice?
If all else fails, i'll just have to go and buy an iMac compatible one.
Also, what software would you recommend for editing, I intend on making a Montage (A video clip of my best gameplay on Modern Warfare 2 with some nice editing)
P.S. I'm only new to this, but I am 16, and I have an A in my GCSE ICT, so I know a good bit about computers.

Of course iMovie is basic, it is aimed at the home and casual user who wants to put holidays and the kid's birthday party on to a DVD and send it to Grandma. It certainly comes with more transition effects than I would ever use.
Why?
Go watch a major, big budget film. Do you see a transition everytime the scene changes?
No. It is 99.9% hard cuts.
Movie making is about telling a story, not bombarding the audience with twirling "effects". They will soon get bored or irritated with that and never watch it again.
Now, if you want something more advanced, start with [Final Cut Express|http://www.apple.com/finalcutexpress> and when you are ready, move up to the [Studio|http://www.apple.com/finalcutstudio> version. Both have plenty of transitions and there are thousands of plugins available. I don't use most of those either -the interesting tools are those for color correction, keying and compositing. Those are what makes the finished product look polished.

Problems with external USB HDDs (MSI P67A-C45)

Hello! Help me, please.
I'm using number of external HDDs (3,5'' -- with power supply each). Most of them are plugged into the motherboard USB 2.0 via a powered USB hub. Some of them are plugged directly to the motherboard. I'm facing three major problems with them. Please, consult me.
1) I cannot access those of HDDs, which are plug via the hub. Windows just do not see them. If I plug the hub into a laptop, it works.
2) Only factory-made external HDDs are working, being plugged directly into USB 2.0. Those of them, which I made myself (using HDD and a box, obviously) are not working with USB 2.0, BUT ONLY WITH USB 3.0. I do not understand, whats the problem with USB 2.0 then... Devices like mouse, printers, scanners are working...
3) If HDDs are plugged and switched on during booting up, the loader gets stuck on "B4" phase. It can be completely stuck or only for 5 minutes and then go on booting. My question is: whats the problem? How can I fix this?
Please, take into the account that all this system was working perfectly fine a week ago, when I had another motherboard and CPU. I'm using these disks for several yeas. I just had a reason for the MB+CPU upgrade and this upgrade leads to such problems... Please, help me.

if they are all fitted with a seperate power source then yes it matters not
many usb drives have 2 usb connectors
one for data and power
the second is just for more power from a second connection
http://www.google.co.uk/imgres?imgurl=http://ecx.images-amazon.com/images/I/41yBRjqo6sL._SS500_.jpg&imgrefurl=http://forum.xda-developers.com/showthread.php%3Ft%3D408693&h=500&w=500&sz=21&tbnid=Qv6dCMoxqLa8cM:&tbnh=130&tbnw=130&prev=/images%3Fq%3Dusb%2Bsplitter&zoom=1&q=usb+splitter&hl=en&usg=__QYH3uaKOuQVopk73OYWaBzBEAsM=&sa=X&ei=nuZDTbSnJsPKhAfBgdnRAQ&sqi=2&ved=0CDcQ9QEwAg
end looks like this

Problem with reading Dual Layer DVDs.

I've a normal iBook G4 with a combo drive (it's the 1 Ghz model) and when I insert a dual layer dvd which I've made on another computer at school, the drive in my iBook won't read it (as in it spits it out). I was wondering if this problem extends to everyone else with a similar model/drive.
The media I used is a TDK DVD+R dual layer disc. The drive has had a problem reading a dual layered DVD-R; the problem being that it could only read (possibly) only one layer of the disc.
Is there a firmware update that can applied to rectify the problem?

Hi and thanks for your reply.
I'm actually not sure if I can read commerical dual layer DVDs, but the fact that the DVD was pressed and not burnt, and that the DVD is released for commercial purchase has lead me to believe that my drive can read the DVDs.
Also backing up my drive's ability to read dual layer DVDs, as mentioned in my previous post, is that it could read parts of a DVD-R dual layer DVD. What I meant by parts, or, just one of the two layers, is that the dvd contains a folder which houses 4 gigabytes of data, or about half the DVD. The contents within this folder can be copied to the hard drive, whereas the content on the root of the DVD can not, causing the drive to continually spin the disc, making the "trying really hard to read" noise, forcing me to restart the computer whilst holding the mouse button in order to get the dvd out.

A slightly different problem with aspect ratio and DVD Maker

I am converting VHS movies to DVD. All are 4:3. Using Microsoft Movie Maker, I create the desired final result, a WMV file that plays perfectly--aspect ratio, sound, whatever.
The problem comes when I use DVD Maker to create the DVD. The picture gets squeezed pretty much to a square (from the 4:3 original). DVD Maker correctly shows 4:3 as the desired ratio.
Ironically (considering the solution offered in several similar posts), when I convert that WMV file to AVI, and _then_ use DVD Maker, all appears fine. My only complaint at this point is that the result is "window-boxed." That is, there is large black space
on all four sides.
I see nothing in DVD Maker to adjust (in hopes that the original WMV might work for me), but just thought I'd ask.

Hi,
There’s similar thread discuss the DVD maker for 4:3 or 16:9 you can refer:
http://social.technet.microsoft.com/Forums/en/w7itpromedia/thread/cd5edb7b-a4dd-43c9-ae95-20ac5692b2c6
And I find someone has submit it as a bug to our website, if our development team recognize it was a bug, they will fix it on next update.
Thank you for your understanding.
Regards,
Leo Huang
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Leo Huang
TechNet Community Support

Problem with USB/External-HDD/etc... not writing?

Hello...
Recently I've been having a problem with my USB, and external harddrive. It seems that for some reason when I copy files to the device, they do not write. If I go and view the device contents on another PC, my files aren't there, but on this PC they are.
The only way that they will copy is if I right click and select "Safely Remove Drive."
I never used to have to do this; Is there a way to make files auto write?
Thanks in advance,
Stephen

Hi, you need to use -sync mount option.

JVC - DV/HDD/DVD recorder deck not capturing

When I capture it looks like it's working, then it doesn't even have a file. I have tried batch, clip and now captures, no luck.
Sometimes I get an unknown file error or an "unable to read the moview file just captured" error. I have tried the QT library reset, no luck. Of course Apple wants $200 for a support guy to tell me that they don't recognize this great deck.
Does anyone have any other experiences? Any advice? I have $1500 in the JVC RM-SDR049U deck. I have worn cameras out before and I don't want to use them anymore to run mini-dv tapes.

A few thoughts:
1) Is the deck turned on before you fire up FC?
2) Is there a particular deck setting you need to have .. ie L1, F1 etc that tells it to recognize the firewire port you're using ... my JVC dual deck has to be set to F1 when using the front firewire port
3) Does the deck have some kind of dubb function that would, say, allow you to dubb from the DV to DVD Recorder side ... is this set properly? In other words, your not going from DVD to DV
All of these function should be properly set before you fire up FC and the Capture window. Just a few things to consider; good luck

What is the problem with Western Digital HDD and OS X.9?

I received an email from Western Digital saying that OS X.9 could cause my files on my WD drives to be erased and to unplug all my WD drives until a fix is done. Is this a real problem and if so when will Apple get the fix out. I have joibs I have to get out to clients and this is a major problem for me.

Western Digital has found that their applications have got serious compatibility problems with OS X Mavericks, and they have to be updated to make them compatible with Mavericks.
Until then, keep the OS X version you have got. This is a Western Digital problem and this is why your main computer shouldn't be upgraded just after the release of a new Mac OS X version

Problem with RD-XV47 HDD/DVD recorder

Similar Messages

Maybe you are looking for