Problem with Reader Extending during render.

I have a process that uses a custom renderer which pre-populates some fields on a form and then reader extends the form for the users. The problem I am having is that when the process is initially invoked, the renderer works fine, and users using Adobe Reader can fill out the form. But if some one else attempts to invoke the process while another user is using it, the form that is rendered is not reader extended and tells the user that the form has been reader extended, but that the form has been changed.
So basically, if one person is using the process everything works great. If more than one person is using the form, then one person will work, while the others will not....
I'm attaching an LCA of the process. Any help is greatly appreciated.
Mike

Which version of LiveCycle Server are you using?
I cannot look at this until tomorrow but I have never seen this behaviour before.
Paul

Similar Messages

Problem with READ Statement in the field routine of the Transformation

Hi,
I have problem with read statement with binary search in the field routine of the transformation.
read statement is working well when i was checked in the debugging mode, it's not working properly for the bulk load in the background. below are the steps i have implemented in my requirement.
1. I selected the record from the lookuo DSO into one internal table for all entried in source_packeage.
2.i have read same internal table in the field routine for each source_package entry and i am setting the flag for that field .
Code in the start routine
select source accno end_dt acctp from zcam_o11
into table it_zcam
for all entries in source_package
where source = source_package-source
     and accno = source_package-accno.
if sy-subrc = 0.
delete it_zcam where acctp <> 3.
delete it_zcam where end_dt initial.
sort it_zcam by surce accno.
endif.
field routine code:
read table it_zcam with key source = source_package-source
                                             accno = source_package-accno
                                             binary search
                                             transportin no fields.
if sy-subrc = 0.
RESULT = 'Y'.
else.
RESULT = 'N'.
endif.
this piece of code exist in the other model there its working fine.when comes to my code it's not working properly, but when i debug the transformation it's working fine for those accno.
the problem is when i do full load the code is not working properly and populating the wrong value in the RESULT field.
this field i am using in the report filter.
please let me know if anybody has the soluton or reason for this strage behaviour.
thanks,
Rahim.

i suppose the below is not the actual code. active table of dso would be /bic/azcam_o1100...
1. is the key of zcam_o11 source and accno ?
2. you need to get the sortout of if endif (see code below)
select source accno end_dt acctp from zcam_o11
into table it_zcam
for all entries in source_package
where source = source_package-source
and accno = source_package-accno.
if sy-subrc = 0.
delete it_zcam where acctp 3.
delete it_zcam where end_dt initial.
endif.
sort it_zcam by surce accno.
field routine code:
read table it_zcam with key source = source_package-source
accno = source_package-accno
binary search
transportin no fields.
if sy-subrc = 0.
RESULT = 'Y'.
else.
RESULT = 'N'.
endif.

Having problem with reading list in safari

i am having problem with reading list in safari some time it work sometimes gets hang....

Might be a cache issue ...
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

I am facing a Problem with reading images from database

Hi everybody..
any help will be most appreciated, I am facing problem with reading images from database. I am pasting my code...
string connect = "datasource = localhost; port = 3306; username = root; password = ;";
MySqlConnection conn = new MySqlConnection(connect); // creating connecting string
MySqlCommand sda = new MySqlCommand(@"select * from management.add_products ", conn); //creating query
MySqlDataReader reader;
try
conn.Open(); // Opening Connection
reader = sda.ExecuteReader(); // Executing my Query..
while (reader.Read())
byte[] imgg = (byte[])(reader["Picture"]);
if (imgg == null)
pc1.Image = null;
else
MemoryStream mstream = new MemoryStream(imgg);
pc1.Image = System.Drawing.Image.FromStream(mstream);
It says Parameter not Valid... i am reading all the images from database

I agree with Viorel. You are getting the error because the format of the data is incorrect probably because the data was modify. It may not be the reading of the database the is incorrect, but the application that wrote the data into the database. You need
to compare the imgg array data with the data before it was written to the database to see if the data matches. I usually start by comparing the number of bytes which is easier to check then compare the actual to isolate which function is changing the
byte count.
An image is binary data. The standard VS methods for reading and writing data (usually stream classes) default to ASCII encoding which will corrupt binary data. The solution usually is to use UTF8 encoding instead of the default ascii encoding.
Ascii encoding with stream often aligns the data and adds extra null bytes to the end of the data which can produce these type errors.
jdweng

Problems with PHCS6 extended - lighting effects (filters)

What can I do to fix my lighting effects? It blocks the entire program Photoshop CS6 at that moment I click on it.
I've tried reinstalling the software with no results
. I would appreciate any help
Message was edited by: mclarice

Hi, mjarrott
My system is Windows 7. (GB Ram 8.00 on a Dell Optplex 980) And Photoshop is my newly purchased in Portuguese, because I'm Brazilian. The problem appears when I try to use the Filters menu - finishes - lighting effects.
My old version worked just fine ...
De: mjarrott [email protected]
Enviada em: quinta-feira, 8 de novembro de 2012 16:16
Para: mclarice
Assunto: Problems with PHCS6 extended - lighting effects (filters)
Re: Problems with PHCS6 extended - lighting effects (filters)
created by mjarrott <http://forums.adobe.com/people/mjarrott> in Photoshop for Beginners - View the full discussion <http://forums.adobe.com/message/4833406#4833406

Problem with reading config file

Hello,
I have problem with reading config file from the same dir as class is. Situation is:
I have servlet which working with DB, and in confing file (config.pirms) are all info about connection (drivers, users, passw, etc.). Everything work fine if I hardcoded like:
configFileName = "C:\\config.pirms";I need to avoid such hardcoding, I tryied to use:
configFileName = Pirms.class.getClassLoader().getResourceAsStream ("/prj/config.pirms").toString();but it isn't work.
My config file is in the same directory as Pirms.class (C:\apache-tomcat-5.5.17\webapps\ROOT\WEB-INF\classes\prj)
Also I tryied BundledResources, it isn't work fo me also.
Can anybody help me to solve this problem? with any examples or other stuff?
Thanks in advance.
Andrew

Thanks, but I am getting error that "non-static method getServletConfig() cannot be referenced from a static context"
Maybe is it possibility to use <init-param> into web.xml file like:
<init-param>
<param-name>configFile</param-name>
<param-value>/prj/config.pirms</param-value>
</init-param>If yes can anybody explain how to do that?
I need to have that file for:
FileReader readFile = new FileReader(configFile);Thanks in advance.

Problem saving Reader extended PDF created in Livecycle with Javascript functions built in

Afternoon
I have created an interactive PDF in Livecycle with built in Javascript functionality. I need users to be able to complete and save the PDF so have saved it as a Reader extended PDF. The problem I'm having is that when a user completes the form,saves it, and then opens it again the Javascript functionality is not showing despite showing the original selection that the user has made. The Javascript is simply a dropdown menu that will show a different table based on the selection so isn't anything major.
I've trawled forums and this is driving me mad so I'd appreciate some help.
I am using Adobe Pro XI.
Thanks in advance
Ben

At the moment I can't sorry. I've run the Javascript debugger in Adobe Pro and it seems there are some errors
Acrobat EScript Built-in Functions Version 11.0
Acrobat SOAP 11.0
ReferenceError: Table is not defined
1:XFA:form1[0]:TextFieldContainer[0]:#subform[3]:#area[1]:Button1[0]:initialize
ReferenceError: Table is not defined
1:XFA:form1[0]:TextFieldContainer[0]:#area[2]:Button1[1]:initialize
ReferenceError: Table is not defined
1:XFA:form1[0]:TextFieldContainer[0]:#area[3]:Button1[2]:initialize
ReferenceError: Table is not defined
1:XFA:form1[0]:TextFieldContainer[0]:#area[4]:Button1[3]:initialize
Basically the form has been built in Livecycle Designer and have drop down menus that show or hide tables depending on the selection but when I Reader Enable the form and users make a selection and then save the form it is not showing the table when it is opened again.
I appreciate your help

Problem saving Reader extended PDF with Javascript functions built in

Afternoon
I have created an interactive PDF in Livecycle with built in Javascript functionality. I need users to be able to complete and save the PDF so have saved it as a Reader extended PDF. The problem I'm having is that when a user completes the form,saves it, and then opens it again the Javascript functionality is not showing despite showing the original selection that the user has made. The Javascript is simply a dropdown menu that will show a different table based on the selection so isn't anything major.
I've trawled forums and this is driving me mad so I'd appreciate some help.
I am using Adobe Pro XI.
Thanks in advance
Ben

http://forums.adobe.com/community/livecycle/livecycle_modules_and_development_tools/livecy cle_designer_es
Karl Heinz Kremer
PDF Acrobatics Without a Net
PDF Software Development, Training and More...
[email protected]
http://www.khkonsulting.com

Problem with P45 Platinum during POST

Good day!
I have MSI P45 Platinum mainboard and from to time to time it freezes during POST with AMI bios POST code - 423C. This happens right after the message that "4096MB OK" and before the detection of SATA/IDE drives. When this happens, the only way to make the system run is to turn off the power (pressing Ctrl-Alt-Del of Reset would result in the same error) - after that the POST procedure finishes correctly and I don't experience any problems afterwards (system is rock-solid after POST completion).
So my question is - can anyone explain me what does this post code mean (D-Leds are not much of a help)? Is this a mobo problem or may be there is some kind of incompatibility with my hardware. I should mention also that I've tried all versions of Bios both official and beta without any success.
This problem does not trouble me that much (doesn't happen often), but still I would like to understand what may cause it.
P.S. My system config - iC2D E8300/MSI P45 Platinum/4x1Gb DDR2-800 Geil Black Dragon (5-5-5-15)/MSI Radeon 4870 1Gb OC edition/HDD 250 Gb WD + 120Gb Seagate/SB Audigy 4/DVD-RW Asus 1814/PSU TT Toughpower 700w (w0105)
Thanx in advance and please excuse my poor English

Thank you for the reply!
Quote from: Jack the Newbie on 16-December-08, 06:39:42
What is your current BIOS Version?
I've recently flashed the latest beta bios version - 1,5 beta 6... but it produces the same error as did the latest official bios v1.4
Quote from: Jack the Newbie
Does the same problem occur with only one memory module installed?
I don't know actually. But thanks for pointing this out - I will test the system with one (and then with two) module(s). I've tested the modules with the memtest86+ software (the latest version, which supports P45 chipset) several times and it showed no errors. So the modules are OK and they worked without any problems with my previous mb (Gigabyte P35-DS3).
Quote from: Jack the Newbie
What do the POST-Status LEDs of the board tell you, when the system freezes at the described stage?
Well, I guess I don't fully understand what does the combination of LEDs tell during the freeze. I'll try to describe the combination -
LED12 - OFF LED13 - GREEN
LED8 - RED LED7 - OFF
LED14 - OFF LED10 - GREEN
LED15 - RED LED11 - OFF
In mobo's manual this diagnostic LEDs are grouped in 4 groups and the description of the group that most closely resembles my case is - "Testing base and Extended memory etc." But I'm not sure that I'm identifying the problem correctly, because of the LEDs that are OFF.
Quote from: Jack the Newbie
Are you experiencing any freeze and/or stability problems appart from the described problem?
No, as I said in my initial post, once it get past this stage everything is running smoothly - OS boots and all software, including the most demanding games or tests, are running OK.

Problem with Reader 9.3

Reader 9.3 does not respond or responds very slowly. I tried updating it - no change. I tried downloading it and I get the following message. Error 1316 network error occurred while attempting to read from file C:/users\chuck\AppData\Local\Adobe\Reader9.3\Setupfiles\AdbeRdr930_en_US.msi
I can use reader to open stuff saved on my computer, but it responds slowly or sometimes not at all.

I have the same problem.
The problem seems to be that the install application does not extract the file it is trying to read.
During the install, a directory "Setup Files" is created, i.e.:
C:\Documents and Settings\Administrator\Local Settings\Application Data\Adobe\Reader 9.3\Setup Files
Then the install application extracts installation setup files in this directory. Unfortunately, the file "AdbeRdr930_en_US.msi" is not one of them. So later in the install process; when it looks for the file, it gives "Error 1316" because it can't find it.
However, the problem seems to be that the file never was there in the first place.
I have tried this several times now, and opened a file manager (windows explorer) to view this (temporary) directory.
The only files I see there are:
File name
File size
abcpy.ini
2 kb
AcroRead.msi
3,880 kb
Data1.cab
107,103 kb
Setup.exe
338 kb
setup.ini
1 kb
If you cancel the install (give-up) after error; then this directory folder and all the above files are erased.
This is clearly an issue with the install program: "AdbeRdr930_en_US.exe" ... which probably should be renamed, because the (second) setup dialog box is clearly titled "Adobe Reader 9.3.2 - Setup" (not, 9.3.0). In spite of this, the properties for the install file say version is 2.0.0.41. Seems a bit confusing.
Anyway, the main issue is that it can't find the "AdbeRdr930_en_US.msi" file because it does not exist in the "Setup Files" directory because, presumably, the installer was unable to extract it in the first place.
The "Error 1316" appears after the "Validating install" phase of installation and during the "Publishing product information" phase when the green progress bar appears to be at 100%. Frustrating, so close, but yet so far away from success.
Oh, and don't run the "Windows Installer Cleanup Utility" ... this is (was) to resolve problems with Microsoft Office installations, but even there Microsoft has retracted this since it is found to actually cause damage to Microsoft Office. See:
[Wikipedia] Windows Installer CleanUp Utility
[Microsoft] How do I uninstall Office, if I cannot uninstall it from Control Panel?
Hope somebody out there can fix this issue. With luck, someone on the development team is watching this thread...
~~

Planning problems with russian language during refresh application

Hello all ))
I have problems with Planning during refresh my Application with Essbase.
I intsalled Essbase on RHEL4 and set ESSLANG=Russian_Russia.ISO-8859-5@Default also I set locale on ru_RU.iso88595
Ater that I installed Planning on Solaris 9 which uses Oracle RDBMS with NLS_CHARACTERSET=AL32UTF8 and set locale on server to ru_RU.iso88595
Now I can create dementions, members on russion language in Essbase without problems also I can create dementions,members,etc on russian language in Planning. But if I create demention or member in Planning on Russian languge and ) try refresh my Application with Essbase I give follow error
"=====(HspCubeCreation.java)sQueryString:?Application=Test1
com.hyperion.planning.olap.EssbaseException: (1060010)
at com.hyperion.planning.olap.HspEssbaseOutlineAPI.EssAddMemberEx(Native Method)
at com.hyperion.planning.olap.HspCubeRefreshTask.addChildren(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.addMembers(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.addDimensionsAndMembers(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.buildOutlines(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)"
Why it's happened?
Please anybody help me

since march 5 we are on planning 9.3.1.1 and also having problems with refreshing:
com.hyperion.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed.
     at com.hyperion.planning.HspJSImpl.lockApp(I)V(Unknown Source)
     at com.hyperion.planning.HyperionPlanningBean.lockApp()V(Unknown Source)
     at HspSecurityFilter.Handle(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(Unknown Source)
     at HspSecurityFilter.doPost(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3150)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
com.hyperion.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed.
     at com.hyperion.planning.olap.HspCubeRefreshTask.run()V(Unknown Source)
     at java.lang.Thread.run()V(Unknown Source)
anyone a idea?

Problem with Reader file when we try to save a pdf version of filled in file.

We currently create fillable forms in Acrobat XI and enable them for fill-in with Acrobat Reader. Our end users are able to key information and save it to the enabled pdf file with Reader, but they want to create a protected version of the form so nothing can be modified once they have approved it. They have been creating "locked" pdf versions of the completed form using CutePdf software. The PDF files they are creating open fine with Acrobat Pro XI or our free FoxIT reader, but when we try to open the files they created with CutePDF with Acrobat Reader, they are quite distorted. According to users, this worked with older versions of Acrobat Reader. Please let us know if you have any suggestions (other than switching from Acrobat Reader to the free FoxIT reader.
Thanks for the help!!
Ken K. - 2191

Can't endorse FoxIt or CutePDF, since I don't use either of them, and Adobe doesn't like us endorsing thrid party products in their forums anyway. On top of that I know several people who had really bad adware experiences with FoxIt, so I'd say stay away from it.
Most likely neither of these software developers has updated THIER software to work with Acrobat/Reader XI and the problem lies with them, since PDF is an Adobe format and they must follow the lead from here, not vice-versa.

Booklet printing problems with Reader XI (version 11.0.06)

I created an 80 page 5.5" x 8.5" booklet using Word 2011 running under OSX 10.9.2 on a new 27" iMac. I then "printed" it to a PDF file. I then opened the PDF file in Reader XI and attempted to print it out using the "booklet" option as described at
http://helpx.adobe.com/acrobat/kb/print-booklets-acrobat-reader.html#main1_Reader_and_Acro bat_X .
I planned to manually duplex the booklet booklet since my HP Color Laserjet CP1518ni printer does not have automatic duplexing. The first sign that something was wrong came when I selected "Back side only" from the Booklet Subset pop-up menu. The numbers in the Sheets from boxes showed "Sheets from 1 to 10" when I obviously needed 20 sheets to print the booklet. Repeated attempts to manually change it to "Sheets from 1 to 20" failed. Each time I changed "10" to "20", it would flip back to "10" when I clicked the "Print" button.
I set the Booklet Subset to print only the even pages and checked the "Reverse" box as I have done to successfuly print thousands of manually duplexed pages before.
The printer only printed ten sheets. The first sheet (what should be the booklet's centerfold) had page 40 on the left side as it should, but 42 on the right (it should have been 41). The last of the ten sheets printed had page 4 on the left side (instead of the expected 2) and 78 on the right side (instead of the expected 79). Even though these were obviously messed up, I went on to print the front side of these sheets, selecting "normal". It printed Page 1 on the right side as expected, but printed page 79 (instead of the correct page 80) on the left.
Folding the ten sheets into a booklet revealed the really bizarre nature of the printing snafu. Page 1 was, as expected, on the front. Turning the first page open revealed pages 4 and 5. Turning the second page revealed Pabes 8 (left) and 9 (right). This pattern continued, printing two pages, then skipping two pages, right into the centerfold pages 40 (left) and 42 (right). The first page turn after the centerfold revealed pages 43 (left) and 46 (right). The next revealed 47 (left) and 50 (right).
I am at a complete loss of how to determine where the printing process went afoul. Printing the PDF file normally (one page per sheet one-sided) resulted in all pages being printed normally.
The really frustrating part of this entire experience is that I could find no place to report this "bug" to Adobe. If anyone can help me solve this printing dilemma, or put me in touch with someone at Adobe who could help, it would be greatly appreciated.
The booklet is due at the printer's tomorrow and the inability to print a proof is a real pain. Hope the printer can print this file as a booklet. I would be happy to send this file (125 Mb) to anyone who might help.

I arrived here looking for a solution! And while reading your post the penny dropped that I didn't have a serious problem. I have a booklet of 112 pages and all I needed to do was re-order the pages as printed so that 1 is followed by a sheet with 2 on the under-face but same side and so on. The pages had printed back to front and needed flipping. But then I have a duplex printer and maybe that makes a difference. Is it to do with your manual duplexing and the order that the second pass is presented to the printer. As my duplex sheets effectively needed flipping over each one I'm wondering if you can solve your problem with a little experimentation and re-ordering before your second pass.

ALV GRID Problem with reading contents

Hi there! I'm quite new with ABAP and I have some problems with the syntax of it. Maybe I should first describe my aim and then I'll show you my code.
1. I read contents from two database tables, called 'zbc_dan_registry' and 'zbc_dan_category'.
'zbc_dan_registry' has 2 columns: name, value.
zbc_dan_category' has 1 column: category.
Now I want to have an ALV Grid, that displays the contents of 'zbc_dan_registry' and one additional column with dropdown fields, where the user can select a category for each row. This is, what my code already does.
Now I want to save the contents of the whole table in a new table 'zbc_dan_registrz' (you see: 'registrz', not 'registry'!) with 3 columns:
name, category, value.
My problem is, how can I read the contents of the ALV Grid, with the user selected category for each row, and save them in an internal table? I've tried to adapt the code of "BCALV_EDIT_04", but I don't get it running.
Some detailled help would be great, you know, I'm really working hard to understand ABAP, but it's really hard for me. Thanks for your support and help!!
Here's my code so far:
*& Report ZBC400_DAN_TESTNO4
REPORT ZBC400_DAN_TESTNO4.
DATA: lt_registrz TYPE TABLE OF zbc_dan_regstrz WITH HEADER LINE,
      lt_category TYPE TABLE OF zbc_dan_category WITH HEADER LINE,
      ls_category TYPE zbc_dan_category, "Struktur Kategorie
      ok_code LIKE sy-ucomm,
      container_r TYPE REF TO cl_gui_custom_container,
      grid_r TYPE REF TO cl_gui_alv_grid,
      gc_custom_control_name TYPE scrfname VALUE 'CONTAINER_REG',
      fieldcat_r TYPE lvc_t_fcat,
      layout_r TYPE lvc_s_layo,
      lt_ddval TYPE lvc_t_drop,
      ls_ddval TYPE lvc_s_drop,
      c TYPE i.
CLASS lcl_event_receiver DEFINITION DEFERRED.
DATA g_verifier TYPE REF TO lcl_event_receiver.
DATA: BEGIN OF gt_outtab OCCURS 0.
    INCLUDE STRUCTURE zbc_dan_regstrz.
    DATA: celltab TYPE lvc_t_styl.
DATA: END OF gt_outtab.
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
TYPES: BEGIN OF lt_registrz_key.         "Struktur mit den Schlüsseln der Tabelle 'Registry'
    TYPES: name TYPE zbc_dan_name,
            value TYPE zbc_dan_value,
            category TYPE zbc_dan_cat.
TYPES: END OF lt_registrz_key.
TYPES: ls_registrz_keys TYPE STANDARD TABLE OF lt_registrz_key,
          ls_registrz_table TYPE STANDARD TABLE OF zbc_dan_regstrz.
METHODS: get_inserted_rows EXPORTING inserted_rows TYPE ls_registrz_keys.
METHODS: refresh_delta_tables.
METHODS: handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid IMPORTING er_data_changed.
* METHODS: get_inserted_rows EXPORTING inserted_rows TYPE registrz_keys.
* METHODS: refresh_delta_tables.
PRIVATE SECTION.
DATA: inserted_rows TYPE ls_registrz_keys.
DATA: error_in_data TYPE c.
METHODS: get_cell_values IMPORTING row_id TYPE int4 pr_data_changed TYPE REF TO cl_alv_changed_data_protocol EXPORTING key TYPE lt_registrz_key.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_data_changed.
    DATA: ls_good TYPE lvc_s_modi,
          ls_new TYPE lvc_s_moce.
    error_in_data = space.
    IF error_in_data = 'X'.
      CALL METHOD er_data_changed->display_protocol.
    ENDIF.
ENDMETHOD.
METHOD get_cell_values.
    CALL METHOD pr_data_changed->get_cell_value
      EXPORTING i_row_id = row_id i_fieldname = 'NAME'
        IMPORTING e_value = key-name.
    CALL METHOD pr_data_changed->get_cell_value
      EXPORTING i_row_id = row_id i_fieldname = 'VALUE'
        IMPORTING e_value = key-value.
    CALL METHOD pr_data_changed->get_cell_value
      EXPORTING i_row_id = row_id i_fieldname = 'CATEGORY'
        IMPORTING e_value = key-category.
ENDMETHOD.
METHOD get_inserted_rows.
    inserted_rows = me->inserted_rows.
ENDMETHOD.
METHOD refresh_delta_tables.
    clear me->inserted_rows[].
ENDMETHOD.
ENDCLASS.
START-OF-SELECTION.
    SELECT client name value
      INTO CORRESPONDING FIELDS OF TABLE lt_registrz FROM zbc_dan_regstry.
    SELECT category INTO CORRESPONDING FIELDS OF TABLE lt_category FROM zbc_dan_category.
CALL SCREEN 0100.
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'BACK'.
      SET SCREEN 0.
      MESSAGE ID 'BC400' TYPE 'S' NUMBER '057'.
    WHEN 'SAVE'.
      PERFORM save_data.
    WHEN OTHERS.
ENDCASE.
ENDMODULE.
MODULE clear_ok_code OUTPUT.
CLEAR ok_code.
ENDMODULE.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'DYNPRO100'.
SET TITLEBAR 'D0100'.
ENDMODULE.
MODULE display_alv OUTPUT.
PERFORM display_alv.
ENDMODULE.
FORM display_alv.
IF grid_r IS INITIAL.
*----Creating custom container instance
CREATE OBJECT container_r
EXPORTING
    container_name = gc_custom_control_name
EXCEPTIONS
    cntl_error = 1
    cntl_system_error = 2
    create_error = 3
    lifetime_error = 4
    lifetime_dynpro_dynpro_link = 5
    others = 6.
    IF sy-subrc <> 0.
*--Exception handling
    ENDIF.
*----Creating ALV Grid instance
    CREATE OBJECT grid_r
    EXPORTING
      i_parent = container_r
    EXCEPTIONS
      error_cntl_create = 1
      error_cntl_init = 2
      error_cntl_link = 3
      error_dp_create = 4
      others = 5.
      IF sy-subrc <> 0.
*--Exception handling
      ENDIF.
      CREATE OBJECT g_verifier.
      SET HANDLER g_verifier->handle_data_changed FOR grid_r.
*----Preparing field catalog.
      PERFORM prepare_field_catalog CHANGING fieldcat_r.
*----Preparing layout structure
      PERFORM prepare_layout CHANGING layout_r.
*----Here will be additional preparations
*--e.g. initial sorting criteria, initial filtering criteria, excluding
*--functions
      CALL METHOD grid_r->set_table_for_first_display
      EXPORTING
* I_BUFFER_ACTIVE =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
        is_layout = layout_r
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
      CHANGING
        it_outtab = lt_registrz[]
        it_fieldcatalog = fieldcat_r
* IT_SORT =
* IT_FILTER =
      EXCEPTIONS
        invalid_parameter_combination = 1
        program_error = 2
        too_many_lines = 3
        OTHERS = 4.
      IF sy-subrc <> 0.
*--Exception handling
      ENDIF.
      ELSE.
        CALL METHOD grid_r->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
      EXCEPTIONS
        finished = 1
        OTHERS = 2.
      IF sy-subrc <> 0.
*--Exception handling
      ENDIF.
    ENDIF.
    CALL METHOD grid_r->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
    CALL METHOD grid_r->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_modified.
ENDFORM.
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
    i_structure_name = 'ZBC_DAN_REGSTR2'
CHANGING
    ct_fieldcat = pt_fieldcat[]
EXCEPTIONS
    inconsistent_interface = 1
    program_error = 2
    OTHERS = 3.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
LOOP AT pt_fieldcat INTO ls_fcat.
    CASE ls_fcat-fieldname.
      WHEN 'NAME'.
        ls_fcat-coltext = 'Name'.
        ls_fcat-outputlen = '40'.
        MODIFY pt_fieldcat FROM ls_fcat.
      WHEN 'VALUE'.
        ls_fcat-coltext = 'Wert'.
        ls_fcat-outputlen = '30'.
        MODIFY pt_fieldcat FROM ls_fcat.
      WHEN 'CATEGORY'.
          LOOP AT lt_category into ls_category.
            ls_ddval-handle = 1.
            ls_ddval-value = ls_category-category.
*            ls_ddval-style = cl_gui_alv_grid=>mc_style_enabled.
            APPEND ls_ddval TO lt_ddval.
         ENDLOOP.
         CALL METHOD grid_r->set_drop_down_table
            EXPORTING it_drop_down = lt_ddval.
        ls_fcat-edit = 'X'.
        ls_fcat-drdn_hndl = '1'.
        ls_fcat-coltext = 'Kategorie'.
        MODIFY pt_fieldcat FROM ls_fcat.
    ENDCASE.
ENDLOOP.
ENDFORM.
FORM prepare_layout CHANGING ps_layout TYPE lvc_s_layo.
ps_layout-zebra = 'X'.
ps_layout-grid_title = 'Kategorie zur Registry hinzufügen'.
ps_layout-smalltitle = 'X'.
ENDFORM.
FORM save_data.
DATA: ls_ins_keys TYPE g_verifier->ls_registrz_keys,
        ls_ins_key TYPE g_verifier->lt_registrz_key,
        ls_registrz TYPE zbc_dan_regstrz,
        ls_outtab LIKE LINE OF gt_outtab,
        lt_instab TYPE TABLE OF zbc_dan_regstrz.
CALL METHOD g_verifier->get_inserted_rows IMPORTING inserted_rows = ls_ins_keys.
LOOP AT ls_ins_keys INTO ls_ins_key.
    READ TABLE gt_outtab INTO ls_outtab
    WITH KEY name = ls_ins_key-name
              value = ls_ins_key-value
              category = ls_ins_key-category.
    IF sy-subrc = 0.
      MOVE-CORRESPONDING ls_outtab TO ls_registrz.
      APPEND ls_registrz TO lt_instab.
    ENDIF.
ENDLOOP.
INSERT zbc_dan_regstrz FROM TABLE lt_instab.
CALL METHOD g_verifier->refresh_delta_tables.
ENDFORM.

Hi Hans,
You raised the Question in the Webdynpro ABAP forum. Here its very diffcult to get the answer from this forum. Please close it here and raise the same question in ABAP General Forum there you will get faster and so many anwsers.
Please close the question here.
Warm Regards,
Vijay

Font problem with Reader 9.3

We have a problem with unusual font displayed for a PDF file created on a Mac with Microsoft
Office. It displays properly on Windows with Adobe Reader 9.3 and on Linux (Fedora 12 and
Red Hat Enterprise Linux 5.4) with kpdf and evince. However, on both Fedora 12
and RHEL 5.4 with Reader 9.3, the fonts used are different from what is expected.
Is there a known issue with fonts in Reader 9.3?

We have a problem with unusual font displayed for a PDF file created on a Mac with Microsoft
Office. It displays properly on Windows with Adobe Reader 9.3 and on Linux (Fedora 12 and
Red Hat Enterprise Linux 5.4) with kpdf and evince. However, on both Fedora 12
and RHEL 5.4 with Reader 9.3, the fonts used are different from what is expected.
Is there a known issue with fonts in Reader 9.3?

Problem with Reader Extending during render.

Similar Messages

Maybe you are looking for