Problem with RealTek RTL 8029 NIC Card on Intel Sol8

Hello friends,
Is it true that I can't configure RealTek RTL 8029 NIC Card on Solaris 8 that installed on Intel Machine? I have searched few matched msg, but still found not solution. Many of them just got so frustrated that they just either bought another nic card or when with other platform!
Any suggestion will be appreciated. thanks. :-)

I am using a driver I downloaded from here:
http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=16&Software=True
Works and install easily but you MUST read the README!
Lee

Similar Messages

I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB)

I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB). When I play video formats like xvid, mkv, avi iMac freezes and emits horrible sound,in service said the problem is not overheating. Not a problem with memory or hard disk because I placed second correct parts.The same problem is with OSX 10.6.8 and 10.8.4 and other players.Apple hardware test found no problem and tech tool pro found no fault.
After five days of testing in the service they can not found fault and it was decided to change the graphics card.
New graphics have been tested for two days but it is not reproduced divx ... but their test software which did not find any fault on the old graphics...
Do I have the right to complain if repair does not fix the problem because I use non apple softwere and video formats.

You could look at the System Profile for the info it presents for the card. But why wouldn't you think it's not up to date if you have the latest install (according to your sig above)?
What program are you trying to run? Is there anything in the system log?
I think it's the program that's having the problem and not anything with your video software.

My sound is like echo and i can't solve the problem with realtek hd audio manager

HP G72 notebook
Windows 7 64 bit
Sound is like echo and can't solve problem with Realtek HD audio manager

It's a Qosmio X300-16M (windows 7 64bit)
I downloaded the last toshiba's sound driver (for win 7 64bit), but it's as if it doesn't contain MaxxAudio anymore... (but the file maxxaudio.dll is still in realtek directory)
It worked correctly after Windows 7 update, (that's why I tried to reinstall the audio drivers which were in the DVD... but it does not have resolved the problem.)
And all my system restore's points have been lost after a wrong bios update or something else (but this isn't a problem anymore)
Now, my computer works correctly, my only problem is that the MaxxAudio tab (from Waves Audio) in the realtek audio manager disappeared... (It just makes a better sound...)
And I just want to know if it's a curent problem or not... and if someone can fix it

Problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

Problem with Gnome3 and/or graphics card Nvidia 8600M GT

Feb 22 07:40:21 localhost dbus[712]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Feb 22 07:50:30 localhost kernel: [ 679.031379] gnome-shell[1277]: segfault at 10 ip 00007f3bbd305c0f sp 00007f3b84ff86d8 error 6 in libnvidia-tls.so.295.20[7f3bbd305000+3000]
Feb 22 07:50:31 localhost gnome-session[888]: WARNING: Application 'gnome-shell.desktop' killed by signal
Feb 22 07:50:35 localhost kernel: [ 683.420948] gnome-shell[1300]: segfault at 10 ip 00007f43bc84dc0f sp 00007f43877fd6d8 error 6 in libnvidia-tls.so.295.20[7f43bc84d000+3000]
Feb 22 07:50:35 localhost gnome-session[888]: WARNING: Application 'gnome-shell.desktop' killed by signal
Feb 22 07:50:35 localhost gnome-session[888]: WARNING: App 'gnome-shell.desktop' respawning too quickly
Feb 22 06:52:39 localhost rtkit-daemon[1004]: Successfully made thread 1420 of process 1420 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Feb 22 07:52:39 localhost goa[1441]: goa-daemon version 3.2.1 starting [main.c:112, main()]
Feb 22 07:58:22 localhost kernel: [ 1150.316794] CE: hpet increased min_delta_ns to 20113 nsec
Hi,
Here is my /var/log/messages.log output.
Since several days my computer repeatedly restarts programs that require at least a bit memory, such as firefox ('segmentation fault'), skype, virtualbox, generaly gnome 3 environment. Sometimes it happens that the system hangs and I can't do nothing, although I can hear that hard disk is working - at that moment only hard reset helps.
I know that the Dell Inspiron laptops (1720) have problems with Nvidia 8600M GT (the cold solder). Is it like that this time? Or maybe something wrong with the memory, CPU (Core Duo) cache memory?
I will be happy to add any additional information.
Regards,
Lukasz

Did you update the nividia driver recently?
there are some threads on this

Problem with NEO2 and sata controller card

1.Product Type: MSI K8N Neo2 Platinum (MS-7025)
and the controller card is a InnoVision DM-8301 and the hard drive is a Seagate ST3320620AS
2.BIOS version: The newest one, 1C0 or something.
3.External VGA Type: Geforce 6800 GT
4.CPU Type: AMD 64 3500+
5.Memory Type: G Skill ZX 2048mb.
6.Power Supply Type:
7.Operating System: Xp Pro
8.Problem Description:
Hello. I have a strange problem with my controllercard. I wrote this text to InnoVision suport and they send me files and bios updates for a whole week and it was still the same problem. And then i tried the card in an older computer and everything worked fine.
I wrote
"Hello. I got some problems with my new controller card. I can find my new harddrive ,that's conected to the controller card, when iam inside windows and it's seems to be no problem. I can look on every seting on it and everywhere i look i can read "No problem". I Also did some test with the seatools programe and everything was fine. But when i schould copy files to it the coumputer start lagging after a few seconds and i cant do anything. After a while i can move the mouse around but the it laggs again. My computer is overclocked at the time but i have tried to use the harddrive when it's not clocked also. Also when im goin in to teh controlpanel and starts the setings for Sillicon Images sata controll and have music on my computer, the music laggs for a very very short moment. Something must be wrong and i can not find it."
It's still the same problem in my computer. The older computer had a MSI moderboard with a VIA chip and i have a nForce 3. InnoVison said i should talk to you about this problem. I have 3 harddrives but i use this controllercard because i want to have my computer overclocked and then i can't use 2 of the sata ports as i think you know.
I would be very thankful if you could help me with this problem.
//Martin

I've used a noname SATA pci card (non raid) with SIL3112 on my neo2 without problems with 1C bios.
Think you may try with a disk lower than 48bitLBA need (137GB barrier), eg a 120GB disk
Quote:
have the InnoVision EIO DM-8301 and had alot of problems using it with WD 160MB SATA drive.
I am using Intel 865 based MB with 2 original SATA channels. The original SATA channels are bootable.
I could not used the EIO card with 160G HDD. The whole setup is working only after I connected oine of my 120G Segate SATA HDD to the EIO Sata card.
I think this card do not properly support HDD above 120G.
Please respond to: [email protected]
http://www.devhardware.com/forums/storage-devices-80/sata-as-boot-20080-2.html
Btw: you have xp sp2 ?
48bitLBA is not enabled in the first version.
http://www.48bitlba.com/winxp.htm
Edit:
Here's another with complete different setup and same problems
http://forum.tweakxp.com/forum/Topic212148-4-1.aspx
I doubt it has anything to do with your motherboard and/or bios.
Btw: I looked at innovision and their drivers in download area are very old.
Get the latest SIL3112 drivers for XP here:
http://www.siliconimage.com/support/supportsearchresults.aspx?pid=63&cid=3&ctid=2&osid=4&
And remember 3112 is sata150 only , so it's not sure it will work with your drive at all .
Anyway it should be set to fixed sata1.5G with jumper - not certain the controller can autonegotiate
without trouble. You cannot have command queing enabled either , disk support only NCQ and controller TCQ
so having command queing set ON will cause major conflicts in data transfers.

Problems with a adaptec ash-1233 card

i am tryin to install a pci card in my computer so i can use the full 200 gigs of my HD and this is the only pci/ ata adapter card i could find. does anyone know how i can get this to work with my computer that i have now? i have a blue and white g3 350 that is amost stock. any info would help thank you very much.

Hold on a minute there cowboy
Sonnet may still selling ultra ATA 133 cards. but they're made by < acard >
and there's still problems with them. I know, because I'm dealing with a tempo 133 "failing on me" with the OS upgrade to 10.4.x.
There's an additional mystery failure of my original HD (IBM Daystar 40 gig) with the update as well.
I've found some references for this to be not uncommon.
There's a firmware flash updater available that solves the ata card problem
but it'll only function in OS 9 ! <SIIG AND ACARD for DL>
I haven't tried it yet, but I thought I would share the info I've dug up thus far.
I get the feeling that "they" really want people to spend more $$$
on getting a SATA card and new HD's to solve the problem.

A Problem with the A205-S4597 video card

Hi
I need a video card for my laptop. A technician told me it only comes with the mother board. I wanna know if it's true or not, how can i get it, how much it cost.
The problem with the computer is that it shows a lot of colors at windows startup and then it stops working, so, i took it to the technician and he told me the problem was the video card, but i have to buy the whole mother board, because it isn't sell alole.

Yep. The video is integrated into the motherboard so you would need to replace the motherboard on that model. Unless you can do it yourself it will probably cost almost as much to fix it as it would to just buy another laptop.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

MSI Z87m problems with Realtek install

I cannot install Realtek drivers with this motherboard. Brand-new system with Windows 7. Intel I5 CPU, gigabyte gtx 780, 8 GB ram. All drivers updated, win 7 updated.
I have tried the drivers from the included disc and also direct from Realtek site. They will install but they will not work. Red Cross shows up on the volume icon anytime I try to open audio.
I have even tried reinstalling the OS twice. Makes no difference.
I tried installing the Realtek drivers from SafeBoot. I just get an error message.
Creative Sound Blaster cinema will also not work because the RealTek drivers don't work.
I have read a few other posts of people having this exact same problem with this motherboard and Realtek drivers.
The windows HD audio will work.
Right clicking on Realtek properties in device manager shows everything is working fine, even though it isn't.
I have also had problems when booting into the bios. If I try to change anything, like a fan setting, and then try to save and exit, the system freezes. I had to CMOS once already. Pc also freezes in the bios when trying to access the hardware Monitor option, requiring a reboot. The other options work fine.
I've written to MSI about this problem but I was hoping somebody might have an idea of what I could try before I take the system back to the store for them to check it and replace the motherboard, as I will then be without the PC for a week.

What xmad is trying to get as information is the 'complete' name of the mainboard. Z87m is not good enough. Also, more information about the other systems components including specifics of the RAM, brand, rated speed, and the PSU brand and description. For now, test with just a single RAM stick.

Solaris 10 - Installation - Networked Option not display- RTL 8139 NIC Card

Hi,
when i installing Solaris, the Networkd (Yes/No) option not display. In my PC (x86) RTL 8139 Networkd Card is installed. Please advice, how can i enable Networked option and docs says that Solaris-10 Supports RTL 8139 Network card. (Ref: http://www.sun.com/software/solaris/self_help.jsp#installing )
Here pls refer "Network Devices (x86)" Section ).
Thanks

I'm not quite sureee, but you might want to run the SDDT test scripts...
http://www.sun.com/bigadmin/hcl/hcts/device_detect.jsp
This you can run from Windows, Linux on the same box, and it will list all the drivers for the hardware that solaris knows about. Inside the tool you can select, whether you want that list for Solaris 10 or SXDE...
Matthias
P.S.: I assume, the driver should be e1000g, but am not quite sure...

Problems with SD (or other) Memory card. Won't work in reader

I bought a Sandisk Ultra II SD card (2GB) and it wouldn't work in my Lacie reader.
When I plugged it in, I got the device not recognized message, asking if I wanted to initialize or eject. Initializing with Disk Utility did NOT work.
The reader works fine with 512MB and 1GB sd cards.
So, I went to a friend who has the latest Lacie reader (and an intel iMac) and it worked great over there. I borrowed the reader and it works great on my PM G5.
Conclusion: With the new fast and/or large capacity cards, you may need to upgrade your reader. If possible go to an apple store and see if your memory card works in a reader there, just to be sure, before purchasing!
Good Luck

Try initializing the card in the camera in which it will be used. This often gives more consistent results, and is recommended over letting the Mac format the card.

HP Probook 6540b problem with fan speed and sound card

Hi.
Sorry for my English.
I have installed Arch 32bit on probook 6540b (it has core i5 processor). Cpufrequtils works well - with governor set on ondemand frequency is adjusting correctly but fun is running max speed all the time. I have tried to configure lm_sensors but it doesn`t detect any sensors. Also fun folder in acpi is empty. It would be great if You could help me.
Thanks for any advice.
...ergh
Fan sometimes works slow so maybe its overheating problem.
But
I have another problem with sound on this laptop. I have IDT 92HD75B3X5 sound chip and snd-hda-intel module loaded for it but it doesn`t make any sound. In Amarok it looks like something is playing because progress bar is moving. I have tried everything from arch wiki and other sources but nothing works. Maybe You can help?
Thanks
Last edited by zennon (2010-08-22 08:57:07)

Hi. Yes. I also tried all tricks with model etc. and nothing. Now I have installed oss and have some progress. I have sound on pcm2 when I run osstest, no sound on pcm1 (but it looks in test like it plays something) and input/output errors from pcm3 to pcm7. I have oss output in multimedia in kde and when I run test I can see moving strips or something (I dont know the word for it ) in ossxmix but I hear nothing. I I tried all configurations in ossxmix and nothing.
Last edited by zennon (2010-08-23 12:37:23)

Problems with BIOS for new graphics card!!! HEEELP!!!!

Hello,I just recently received my new graphics card (Gigabyte GeForce GTX 960), and I am having some troubles getting it to work with my computer (p7-1072sc). I go myself a new PSU (Crossair CX600M), istalled it properly, pluged all the components up and put in the new GPU. Every time I turn on the PC, it freezes at the blue HP loading screen and does not respond to any keys.After some google searching I found out that I most likley would have to update my BIOS, so I went to the HP homepage. Entered my modelnumber, downloaded the new BIOS update (My current version was 7.14 13.10.2011), the update said the version was 7.15 05.25.2013. I downloaded the exe file, closed all other programs and ran the file. I started out as normal, but as the main installationprocess started I got the message that hpprobar3 stoped working. The computer freezed for a short while and then I got the message that the new BIOS had bin successfully installed, so I restarted the comuter. After that I checked back on the systems information and the version had bin changed to 7.15, but the date was still 13.10.2011. I tried the same rpocess again and the same thing happened. I ried again to put in the new GPU, and it still froze on the blue HP loading screen. I also tried to find the directory for the BIOS file (sp55548.exe) (to make a flash installation), under c:/swsetup, but I only found one folder named sp68021. Can anyone help me with this?? I would really appreciate any advice sort of advice!!!
PS: I am pretty new to all this stuff, so please be patient and explain any technical informoation or terms.

As stated before, and as a refresher. I just got off the line with MSI and EVGA. What you have is a Legacy motherboard. It can not function with a UEFI BIOS graphic card. That said:MSI (Greg): The 750Ti NF has a switch for Legacy/UEFI. All others in the 700 series are UEFI. The 900 series, plus the R7, R9 ship with the new VBIOS, a hybrid that detects the correct BIOS (Legacy/UEFI). EVGA (Kayon): All 600 and 700 except the 750Ti are Legacy.

[SOLVED]Problem with Realtek HDA and ATI HDMI Default card under ALSA

I have the usual problem about no audio on flash or VLC. I use Realtek HDA as primary sound card but is not detected as the default one. I checked the wikia, and forum post but no fix. After reading some info on a gentoo page, and some in the ALSA wiki I see both of them uses snd_hda_intel, so I cannot blacklist or use "option snd_hda_intel index=0" I've tried also searching on Google, but not luck. Anyone know how to fix it? Thanks!
cat /proc/asound/cards
0 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfbdfc000 irq 25
1 [VT82xx ]: HDA-Intel - HDA VIA VT82xx
HDA VIA VT82xx at 0xfbffc000 irq 17
lsmod |grep '^snd'
snd_hda_codec_atihdmi 2095 1
snd_hda_intel 19020 4
snd_seq_dummy 1079 0
snd_pcm_oss 33662 0
snd_seq_oss 25104 0
snd_mixer_oss 14686 1 snd_pcm_oss
snd_seq_midi_event 4496 1 snd_seq_oss
snd_seq 41752 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4369 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_codec_realtek 193684 1
snd_hda_codec 67274 3 snd_hda_codec_atihdmi,snd_hda_intel,snd_hda_codec_realtek
snd_hwdep 4764 1 snd_hda_codec
snd_pcm 58276 4 snd_hda_intel,snd_pcm_oss,snd_hda_codec
snd_timer 15423 3 snd_seq,snd_pcm
snd_page_alloc 5981 2 snd_hda_intel,snd_pcm
snd 43283 17 snd_hda_intel,snd_pcm_oss,snd_seq_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_realtek,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Madrid"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(snd_hda_codec_realtek snd_seq_oss snd_hda_intel !snd_hda_codec !snd_hda_codec_atihdni radeon fuse !snd_pcsp !pcspkr)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="archlinux"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng alsa dbus hal network netfs crond kdm)
Last edited by Shinku (2010-08-27 13:14:06)

I just added a section to the ALSA wiki page that should work perfectly for you: http://wiki.archlinux.org/index.php/Alsa#In_User_Space
Last edited by Odysseus (2010-08-26 20:32:56)

Problem with the ATI 200M graphics card in a Satellite A110-334

The computer is used both for office and home use (playing games, music etc)
Only one problem after 6 months of use, but I can't get around it.
When I start up Quake 3 all is well I can play for let's say 10-20 mins.
After that I get a Blue Screen of Death saying that there was some memory error connected with the graphic card.
Windows "tells me" to change the video card (it's not something i can do with a laptop ;) ) or to contact the hardware producer to change the bios because something could be wrong.
Well only think I could do on my own was to change the drivers (I found some compatible with my card) but that didn't help. I also tried to change the amount of onboard memory used by the card (It uses x amount of available RAM), but to no avail

Hi,
which drivers youre using?
Did you checked already these drivers out:
http://www.omegadrivers.net/
Maybe it helps. Otherwise you should send your machine to an authorized service partner for a hardware checkup since your machine is still in warranty and it wont cost you anything.
Heres a link to find the nearest ASP in your country:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Regards

Problem with RealTek RTL 8029 NIC Card on Intel Sol8

Similar Messages

Maybe you are looking for