Problem with receiver RFC.

Hello all,
I am getting below exception does anyone came across such exception, Please help me in getting out of this.
Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling BAPI_IN in remote system (RfcClient[CC_**********_RCV]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE:
could you please provide me you valuables inputs.
regards,
satya

Few basic checks-
1.Check whether your BAPI/FM is working fine in R/3 system and is remote enabled.
2.Check whether the user credentials you provided in the channel configuration are correct or not.

Similar Messages

Error while posting GR from EWM in ECC. "Problem with receiver finding"

Hi
I have completed putaway of inbound delivery in EWM. This has triggered PPF to ECC for GR posting. This is stuck in ECC SMQ2 with error "Problem with receiver finding".
I have checked ECC>EWM interface configuration. Handling unit management setup in ECC and EWM. Do not see any issues there. Also tested GR account postings with IM storage location for Po in ECC. This is also working fine...so no issue with account determination.
Unable to figure out what is causing issue. Please help. Thank you.
Best Regards
phani sai MN

Hi All
Thanks for your responses. Issue was with distrubution model fiter parameters. for message type InboundDelivery.Deliverychange there was additional filter parameter for logical system. Removed values for logical system and only retained warehouse number.
With this issue is resolved. GR is posted succesfully in ECC.
Best Regards
Phani sai MN

Problem with Receiver File adapter

Hi
I have a problem with receiver file FTP adapter, while writting file in target folder, connection is failing, after retries, it writting file again. How to avoid this situation, is there any way to write the leftout part in the file.
VS

Hi
Thank u all, Problem is solved, i changed write mode to Over write existing file. It is working fine.
VS

TS3276 I receive a pop up from ICal saying the server does not recognize me user name and password. This started yesterday. I have no problems with receiving or sending emails through Mail

I receive a pop-up from ICal saying the server does not recognize my user name and password for my me.com email address. This started yesterday and occurs about every 5 minutes or so. There are no problems with receiving or sending email through Mail. I did change me email password several days ago but have no problems sending/receiving since then.

I fixed the problem. I opened Preferences in ICal and entered my new password. No more pop-ups

Problems with receiving

hello again! : ( I have problems with receiving mails, my
installation is local, therefore I am using telnet but it marks errors
to me you have some idea?
bash-2.03# telnet pegaso.qoslabs.com 25
Trying 192.168.20.20...
Connected to hostname.com.
Escape character is '^]'.
220 pegaso.qoslabs.com -- Server ESMTP (Sun ONE Messaging Server 6.0 Patch 1 (built Jan 28 2004))
MAIL FROM: [email protected]
250-2.5.0 No HELO/EHLO seen; continuing anyway, [192.168.20.20].
250 2.5.0 Address Ok.
RCPT TO: [email protected]
550 5.1.1 unknown or illegal alias: [email protected]
RCPT TO: katiuskac
550 5.1.1 unknown or illegal alias: user
DATA
554 5.5.0 No recipients have been specified.
QUIT
221 2.3.0 Bye received. Goodbye.
Connection closed by foreign host.
what is the solution?
do you have any idea?

If the MTA believes that you have an error, it will give you the 5.5.1 error.
The error may be any of several provisioning problems. Since you haven't sent me the ldap entry for the user, I really can't tell which error you may have made.
A common error is the value you placed in "mailhost".
This needs to be the Fully qualified name of your mail server, not an alias. If you desire to use an alias for the system, you need to make additional configurations.
Please believe me, I'm trying to help you, but when there are dozens of possible errors, and I have no data to examine, I can't tell which error you may have made.
I do know that if you correctly provision a user, that user will work.

See Below. I have a problem with receiving email. Sending is ok. This is for my Thunderbird email account.

"An error occurred while sending mail. The mail server responded: 5.1.1 <[email protected]>: Recipient address rejected: User unknown in local recipient table. Please check the message recipient [email protected] and try again."

''I have a problem with receiving email.''
''An error occurred while sending mail.''
Who is right here?
''This is for my Thunderbird email account.''
There is no such thing as a 'Thunderbird email account'. Thunderbird is an email client, and you use it to retrieve mail from an account you created with your email provider.

HT4623 is anyone else having problems with receiving and sending text messages. most people in my contacts are not getting messages that i send to them.

is anyone else experiencing problems with (SMS) text messaging. Most all of my daily contacts dont receive my messages.

Make sure you have checked off iCloud contacts in your Contacts app under Groups in upper left corner.

Problem With Receiver Communication (File Adapter)

Hi,
My SAP XI Version is 3.0 with Service Pack 7,I have a strange problem,
I have a flat file coming from Unix system,I need to convert this into XML and put a copy in the Archive mode and send the XML file,getting it converted into flat file format send it to the receiver.Here I have to do the content Conversion,So,I have done content conversion while configuring Sender and Receiver Communication Channel.
I am using NFS as Transport Proctocol.So, everthing was fine when i run the scenario,after activating.The Sender communication Channel is Archiving the files.But I am unable to see any file with receiver communication channel.
So,for this I have checked up with Adapter monitoring in Runtime Workbench. In my File Adapter My Sender as well as Receiver Communication Channels are in Green.They are mentioning that Sender Communction is sucessful and
RECEIVER COMMUNICATION IS Sucessful but no messages processed.
Can any one suggest what to do now.Everything is fine with Content conversion and Unix System.But my receiver is not receiving any messages.
Should any OSS notice or patch work needs to be applied.
Thank You,
KishoreJ.

Hi Kishore,
I Guess you should first see if the file is being picked......for that do the following.
While configuring your Sender File Adapter, let the mode be DELETE. This way, we will know if the file is being picked by the File adapter. The file will be deleted and you can be sure that it has been picked up.
Next, look into the RWB--> FILE ADAPTER and see the log of the file adapter
and also, you can see the flow of your message in the integration engine in SXMB_MONI.
Ans still if your message is not showing up in SXMB_MONI, please do as explained below.
Increase logging and trace level in:
SXMB_ADM -> Integration Engine Configuration -> Specific Configuration
Also create entries as follows in it:
LOGGING = 1
LOGGING_SYNC = 1
TRACE_LEVEL = 3
TRACE_LEVEL_PROPAGATION = 1
Also refer XI: I cannot see some of my messages in the SXMB_MONI
Regards,
Abhy

Problem with Http RFC Scenario

hi all.........
Am doing an HTTP RFC scenario. The scenario is working fine with all messages in IS, IE and AE being successful. But the problem is the RFC response am getting is not what is expected. When i run the RFC directly with the same input value I get the correct response. Can anybody figure out what is the problem. In the channel (adapter monitoring) what comes is :
"RFC_HISTORY
- Error: 2007-01-16 09:47:52 IST: Message processed for interface ZBAPI_NETWORK_CONF_ADD: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.af.rfc.util.bapi.BapiException: Parameter with name RETURN not found.
- Error: 2007-01-15 19:57:21 IST: Message processed for interface ZBAPI_NETWORK_CONF_ADD: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.af.rfc.util.bapi.BapiException: Parameter with name RETURN not found.
- OK: 2007-01-15 19:28:31 IST: Message processed for interface ZBAPI_NETWORK_CONF_ADD "
thanks in advannce

Hi,
><i>I ve used RFC itself as message type for http by importing it into external definition. So since both structures are same i omitted both MM and IM</i>
Should work fine. Can you look into SXMB_MONI and check what the response is? Make sure that the request message is also as expected.
Regards
Bhavesh

Problems with Receiver Determination

Hi everybody.
I have started as XI developer 2 weeks ago.
I'm trying to replicate de tbit40 exercises in our company system. when i try to make the 'Receiver Determination' somethings happen. It doesn't appear the part to write the system receiver.
This is my scenario : file->XI->IDOC.
I've defined in the SLD the hardware, including one PC, the XI server and the SAP 4.6c server.
This is only a test in order to check the connectivity between the PC and SAP R3. I haven't configured yet the part of the IDOC in the R3 system. Is this necesary to view the 'subwindow' of system receiver?
Thanks.

Hi everybody,
I'm having some problems with the sender agreement and the receiver determination, let me explain you the scenario: i'm trying to translate inbound plain text files to XML to a outbound interface for MDM.
An XI consultant (expertise) has successfully created the inbound - outbound interface mappings for vendors catalog, it has worked good since he set it up, but now that i'm trying to create the materials mapping according to the manuals step by step, and when i try to create the receiver determination settings, i can't find my interface mappings, the pop-up window return 0 objects for interface mappings (that i have already created and linked with msg types).
So what can i do? Do you have any idea?
Regards.
Gerardo.

Discovery System: Problems with exposing RFC as web service

We have a version 2 discovery system and have successfully implemented the three exercises from the TechEd workshop (Sales Order Distribution, Creating a PO Store Record WS, Adding a New Step to the Procurement Scenario with SAP CAF GP). It seems to work fine except for two issues with the RFC/WS:
1) The RFC, and therefore the WS, always returns an empty string instead of the 'X' that the documentation shows in Step 4.h. We checked the RFC itself and it looks like it has an error with the price field; it always appends a blank to the end of the price string and then errors.
2) The created web service does not show up on the Web Services Navigator page. Since the instructions tell you to save the URL to the WSDL, we can find the web service and test it, but you cannot find it on the Navigator page.
Neither of these problems are huge, but they make me worry that something is not quite right in the Discovery System and we may end up with larger problems later. Any ideas what could cause these two problems, and how to fix them?
Thanks, Eric
Message was edited by:
ERIC HAMER

Hi Eric,
First of all let me assure you that your system is perfectly fine and both topics that you have raised are the way the system is suppose to respond.
1. The reason that the service is returning a null is because you are entering the same input parameters more than once. Since some of the parameters are used as primary key's in the database, you will need to change them in order to successfully store the data.
2. The reason that you don't see the service in the Navigator page is because this service resides in the ERP and not in WebAS. Only services deployed on the WebAS will appear in the Web Service Navigator page.
Thanks,
Itai

Problem with Adaptive RFC Model.

Hi.
I have a problem with creating an Adaptive RFC Model.
When i choose a function from function list, that appears, and click next, the model wizard display log information with following text:
<b>[Warning]: Creating a connection with Metamodel language <en> failed. Continuing with language <ru>
[Fatal]: com.sap.mw.jco.JCO$Exception: Missing R3NAME=... or ASHOST=... in connect_param in RfcOpenEx
[Info]: .................</b>
The SLD server and SLD bridge is running.
How this can be fixed?
Thank you.

Hi
Open SAPLogon. Select the server profile say "Dev" and click on groups. In the window that appears enter the 3 letter id as System id. This you would get when you logon to SAP and see the right hand bottom corner. It would be a 3 letter "XXX". If not ask your basis administrator.
In the Message server space enter the Hostname or ip address (try both in case one of them doesnt work) of your R/3 server. Click on Generate List. You should get some groups appearing in the view below.
If it works then your message server is working fine. Let me know if that helps you.
regards
ravi

Lumia 920 service problems/ no internet access. Also problem with receiving calls?

As of yesterday I have been having a wierd problem with my Windows phone, and exploring through the web, I've seen a couple of other people with this problem as well, with no one really coming up with any other solution but to do a hard reset, which I abosuletly want to avoid. So my problem is that I don't seem to have any internet access, regardless if I am connected to 4G or through wifi. This is real wierd because it just started happening all of a sudden. I didn't do any update, didn't download anything new, nothing like that.I know for a fact that I'm simpily not just mistyping addresses or have airplane mode on, I'm stumpted as to why this is happening. To add another layer of confusion, I don't seem to receive all calls I get. For instace: yesterday, one of my friends called me, I received his call right? Well later that day, my Father apparently called me, but I never received any nottification or even a voicemail that he ever did. What the heck is going on here and what can I do to resolve this??

Hello @ThomasWolf
I’m sorry to hear you’ve been experiencing issues with your phone.
When you say you’re unable to access the internet, is it just via your Web browser? Or is it apps that require data such as Facebook, YouTube, etc.?
Have you tried via more than one Wi-Fi network as well?
Try to open up att.com/ttr via your mobile web browser; do you see a confirmation page?
If you’re continuing to have issues, then please contact us.
Thank you,
Charise

Problems with receiving signed message in outlook

Hello
I have a problem with signing message using Javamail. I use a sample program code that I got from some tutorial - it seems to work fine but when I receive the message using outlook express there are fallowing warnings:
- the message has been changed by untrusted people
- the e-mail address from the certificete:... (here ma address) doesn't match the address of the sender:... (here no adress)
I set all the varables: 'sender', 'replyTo', 'return-path' and 'from' with my address used in the certificate. I don't know why there is no address after the word: sender. Maybe some of you had such a problem, solved it and could share with me what is wrong with my message?
ania

Hi
It's me again. I solved the problem.
The first warning was because I changed the message after signing it, before sending :), and the second (that was worse) was because I was setting up all possible fields: sender, from, reply to and return-path - only sender should be set - now everything works great :)
ania

Having problem with receiving gmail message in my appropriate email folders.

Hello,
I am new to this forum and I have a question.
Yesterday I was having problems with my BB Torch, the touchpad was doing funny things like jumping lines etc.
So, I did a force restart, (remove battery for a minute).
After I did that, all my gmail emails disappeared from the appropriate gmail icons. I have 2 gmails setup and none of the messages are there.
They are still coming under the general MESSAGES folder where I can retrieve them but nothing under the gmail icons.
Is there any way to fix it?
I was really happy with the separate gmail folders and everything worked fine until now.
Just FYI... I did an update to the Blackberry software couple weeks ago but still everything worked fine even after.
Can somebody help me to fix this?
I even deleted the gmails and reset them again through the BB Setup.
It still says, "No messages".
Thank you

Hi zuzikfuzik,
Welcome to the Support Community!
Sounds like you may have an issue with your Messages database. Please try clearing the Messages database then test with new messages only, without restoring the previous messages from backup. For further instructions, please see the following KB article: "How to clear the user content databases from the BlackBerry smartphone" http://bbry.lv/JtQKcw
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Problem with receiver RFC.

Similar Messages

Maybe you are looking for