Problem with Recognition of Address field

When I am creating a event into my schedule and I type in the location of my appointment, an ! in a yellow circle appears. When I click on this field it will not tie me into a location on Maps...
When I MobileMe sync with iphone address shows up as a like gray field again no Map integration?
I miss this feature as I always use it to navigate with Manhattan from location to location...

Similar Messages

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regis

zlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro

Cisco ASA 5505 - problem with negotiating IP address from PPPoE

Hi all,
I have problem with negotiating IP address from PPPoE. There is following design: ISP providing vDSL ending on VDSL modem in bridge mode. Behind brigde modem is ASA 5505 terminting PPPoE on OUTSIDE. Everything works fine except negotiating IP address from PPPoE server.
I have configured ASA 5505 with (ASA Version 9.2(2)4) for PPPoE like this [1.]. But If i try to "show" IP address on OUTSIDE interface a get this [2.], ok strange but let's continue. If list "show vpdn pppinterface id 1" i get this [3.]. Seems that I got public IP addres what was right, but this IP address was not associated with interface OUTSIDE?
Well, if I set IP address manually like this [4.] and also set a default route everything works fine but what will happen when ISP change reservation for my IP address or default gateway.
I have tried different version of ASA OS like 8.4, 9.1 but without luck.
Can anybody help me. Thanks a lot.
Regards
Karel
[1.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address pppoe setroute
vpdn group O2 request dialout pppoe
vpdn group O2 localname O2
vpdn group O2 ppp authentication chap
vpdn username O2 password *****
interface Ethernet0/0
description >>uplink O2 vDSL<<
switchport access vlan 100
[2.]
ciscoasa(config-if)# show ip address vlan 100 pppoe
ciscoasa(config-if)# 0.0.0.0 255.255.255.255 on Interface: OUTSIDE
ciscoasa(config-if)# show interface vlan 100 detail
Interface Vlan2 "OUTSIDE", is up, line protocol is up
Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
        Description: >>VLAN pro pripojeni do internetu<<
        MAC address f44e.05d0.6c17, MTU 1492
        IP address unassigned
Traffic Statistics for "OUTSIDE":
        28 packets input, 1307 bytes
        31 packets output, 721 bytes
        0 packets dropped
      1 minute input rate 0 pkts/sec, 3 bytes/sec
      1 minute output rate 0 pkts/sec, 1 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Control Point Interface States:
        Interface number is 15
        Interface config status is active
        Interface state is active
[3.]
ciscoasa(config-if)# show vpdn pppinterface id 1
PPP virtual interface id = 1
PPP authentication protocol is CHAP
Server ip address is 88.103.200.41
Our ip address is 85.71.188.158
Transmitted Pkts: 20, Received Pkts: 16, Error Pkts: 0
MPPE key strength is None
MPPE_Encrypt_Pkts: 0, MPPE_Encrypt_Bytes: 0
MPPE_Decrypt_Pkts: 0, MPPE_Decrypt_Bytes: 0
Rcvd_Out_Of_Seq_MPPE_Pkts: 0
ciscoasa(config-if)# show vpdn session state
%No active L2TP tunnels
%No active PPTP tunnels
PPPoE Session Information (Total tunnels=1 sessions=1)
SessID TunID Intf     State       Last Chg
22298      2 OUTSIDE SESSION_UP 561 secs
[4.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address 85.71.188.158 255.255.255.255 pppoe setroute
route OUTSIDE 0.0.0.0 0.0.0.0 88.103.200.41 1

You're right that the ACL should not affect otherwise allowed communications to the interface address.
Try disabling the ip audit feature on your outside interface.
no ip audit interface OUTSIDE AP_OUTSIDE_INFO
no ip audit interface OUTSIDE AP_OUTSIDE_ATTACK

Problem with flow of expandable fields

Hi everyone,
I have important problem with flow of expandable fields in table in dynamic PDF form. The issue I am talking about you can see at the top of column 3 on page 2 in PDF in link below.
Here is uploaded PDF form and sample XML data (form has import button and is ReaderExtended that you can easily test it and see my problem):
http://www.speedyshare.com/718224676.html
Generally I have created table with 3 columns using Table object (each field has allow multiple lines selected and expand to fit). It is closed in FormBody subform which is flowed subform.
Row in table is repeatable and has “is allow to break page” setting set on.
Sometimes when there is a lot of text and row page break there is problem with flow.
For example text from one rows overlaps on text from next row.
I tried to solve this problem by changing row height, indents, font size, line spacing but always when I thought that I have fixed it I got another data which generated the same flow problem.
Did anyone met this problem earlier and found solution to this issue? This is really important for me and I am really in dead end so any hints would be really helpful.
I am using Adobe Livecycle Designer 8.1 and PDF form target is 8.
I really appreciate any help in this problem.
Thanks,
Kamil Dłutowski

I posted link to my form in my first post.
Here it is: http://www.speedyshare.com/718224676.html

How Does one fix this-"This Mac can't connect to iCloud because of a problem with "My Email Address"

Hello Apple Community: I receive this message multiple times a day.
"This Mac can't connect to iCloud because of a problem with "My Email Address" Open iCloud preferences to fix this problem.
After sighing into iCloud I can not find a problem.
Is this a Yosemite issue, because thats when the issue started?
Thanks for your help..

Yes, this is a constant problem for me as well. I have 2 Macs (iMac and old MacBook Pro) running Yosemite. I seem to only get this message on the iMac. I've tried logging out of ICloud on both and logging back in; the problem re-appears randomly. I also have no issue on IOS devices.
It's mainly annoying. I open the iCloud panel in System Preferences and it tends to go away.

This Mac can't connect to iCloud because of a problem with my email address Open iCloud preferences to fix this problem"

I keep getting this message over and over and over.
This Mac can't connect to iCloud because of a problem with <my email address>
Open iCloud preferences to fix this problem"
I go to IC Preferences but there is nothing I can fix there that is relative.
My outbox is no longer working in MAIL so I cannot email out. I have to use my wife's MBP to send emails.
I can get emails. I didn't change anything in m,ail preferences, so what is Apple doing to me?

I also have had this problem and see no resolution - signed out of my account and signed in again, did not get any resolution to the problem. done this twice. Is Apple addressing this? I thought that 10.10.1 would resolve this but found to my dismay that there has been no resolution. Each time I log out of iCloud and then sign in again, there is a time lag before all my files in iCloud become accessible so have stopped trying this remedy. I also have issues with iTunes where am asked for my password 4 times before I can log in. Would like to know if there is anything in the pipeline to remedy/rectify this problem. Issues with bad internet connectivity have improved but are still there. Wish Apple would spend some more time in testing and resolving issues before releasing new software.

Import Manager - Problem with 0..n field in Import Manager

Iu2019m having problems with XMLs that contain multiple or single tags in MDIS process. For example: I did the map using a XML with multiple tags for Address:
<address>
<item>
u2026
</item>
<item>
u2026
</item>
</address>
When I send two address or more Address, the Import Server work fine, but when I send only one Address, the address is not imported.
<address>
<item>
</item>
<item>
</item>
</address>
Opening the xml file with only one Address in Import Manager, I saw that the fields isnu2019t mapped, but when I open a xml file with multiple Address itu2019s open correctly.
The XSD cardinality for the Address\Item is 0..n

Hi Evandro ,
If it is processing the input file correctly through the Manul Import manager process then update your latest Map by using SAVE As option or else save this correct map with a new name altogether and use this new map in the port for automatic importing.
If your file is able to process correctly through the Import manager without showing any errors till the Import step in the Import manager then this map must be correct and shoul automate the importing correctly.
Provided you are using the similar file for automatic importing as well.The file name and the fields as well as the value mapping as saved in this corrected map must not differ with the input file else this saved map will not be able to import correctly.
Check to see if you have made correct setting for automatic importing by refering the below link:
http://help.sap.com/saphelp_mdm550/helpdata/en/43/12036df94c3e92e10000000a1553f6/frameset.htm (Automatic importing MDIS - Import manager ref guide>MDM import server(MDIS)>MDIS Consfiguration)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8973bcaf-0801-0010-b7a7-f6af6b1df00e(mdm import and syndication server)
Also check the exception folders if your import is not taking place automatically:
http://help.sap.com/saphelp_mdm550/helpdata/en/43/12036df94c3e92e10000000a1553f6/frameset.htm (Exceptions- MDM Import Manager MDIS-Exception handling)
Hope It Helped
Thanks & Regards
Simona Pinto

Problem with Math In Calculated Fields

I am calculating a group incident rate for data returned from
a query. The formula is Number of cases multiplied by 200000
divided by number of hours worked. Cases in my report is the
calculated field: calc.CaseSum (the sum of cases for the group)
Hours is calc.SumHours (the sum of hours for the group). The actual
values for these variables (for the first group are 48 and 29427171
respectively. When I create the following calculated field called
rate using the formula: (calc.CaseSum * 200000) / calc.SumHours,
Cold Fusion Generates a Runtime Error:
Invalid ColdFusion expression in report. If the expression is
a string, ensure that it is within quotes. Error: (calc.CaseSum *
200000) / calc.SumHours is not a valid ColdFusion expression.
If I use the constant value "29427171" as the divisor, the
report works albeit only for the first group. Any ideas; is this a
bug, or am I misusing the product?
Addition: I forgot to mention I am using CF8. Also this
formula worked fine as a Report Total before I introduced grouping
and modified the calculated fields to reset on the change of a
group.

Sorry, I've been on another project for awhile. This problem
will certainly be a "show stopper" for me if I cannot resolve it.
As I mentioned in my original post, I used a constant in the
formula in lieu of the variable and the calculation worked. This
would suggest that CF does not have a problem with a large number.
In spite of that reasoning, I tried Tony's suggested (thanks
by the way!) with the identical outcome, only difference is the new
formula is displayed in the error message.
Tony, you also suggested that I set the variables using
CFSET... How would I do this within the report writer environment.
I had tried a similar approach: to perform half the calculation
i.e. that within the parenthesis, and assign that value to a
separate "calculated field: and then perform the rest of the
calculation on that variable with the same outcome.
I think that I may be dealing with a CF bug here, I'd like to
find a workaround... I've noticed that CF8 has a new patch, perhaps
after I apply it, I may be able to get this thing to work. I'm on
another project right now so it will be a few days before I can
test this theory, I report the result.
Should this fail, and no one can come up with a workaround, I
will report this to Adobe.

Adhoc query-Problem with Personnel no output field

Hi Gurus,
We are trying to run an adhoc query using a customized Info set(PNPCE logical database).
While running the query,we had selected Personnel no(from Payroll status P0003 table) as output field and Company code(from Org assignment P0001) as input field in the selection.
Problem is in the output field we are seeing the Personnel name details in place of Personnel no.Could anyone please suggest what could be the reason behind this and how to fix it.
Your help will be highly appreciated.
Warm Rgds
Sushil

Hi Sushil,
The default output for fields with a text and a value (Name = text, PERNR = value) is the text. You can change this by right clicking on the output box in Ad Hoc and selecting "Value". If you want both name and number, select "Value and Text".
You can also change this default to Value from Text if in Ad Hoc, you go to Edit --> Settings. On the last tab, change the radio buttion for output default to Value from Text. This will change it for all fields so you would see the eight digit number rather than the name of the position or org unit. Thus, you may want to keep it at Text and use the right click to change specific fields as needed.
By the way, it is usually best to utilize the personnel number field from IT0000-Actions, although it can be obtained from any infotype if you include that field in the field group when creating your infoset.
Paul

WLC 2504 problems with one IP address range

I am having an interesting issue configuring a new 2504.
How it is setup:
Port 1 management with vlan tagging on vlan 111
Port 2 trunking with ap-manager2 on vlan 3, 102 on vlan 102 (Not ap-manager), and 1001 on vlan 1001.
All of the vlans have distinctive and unique IP ranges. Vlan 111 is running 172.16.128 /20, 102 is 172.19.252 /23 and vlan 1001 should be running 172.17 /16.
Here is my problem. I can setup all of the dynamic interfaces on the appropriate ip ranges, but for some reason when I configure the 1001 vlan dynamic interface with the /16 address space, I lose connectivity to the GUI managment interface. I have to go in through the CLI and remove the interface or change the IP range. I have tried other /16 address space on that vlan and do not have a problem with them. the 172.17 space appears to be the only one that will not work.
I have attached the config from the controller (Minus some site specific stuff like the SNMP community and wpa stuff.) The config is using a 172.20 /16 right now on the 1001 interface so that I could get into the controller and download the config. It should be 172.17 /16. The acutal IP info should be 172.17.4.253 255.255.0.0 172.17.0.254
My computer is on the 1001 vlan and I have verified the IP is not in use and am using the same subnet, gateway etc as I am trying to configure the wlc with.
Switch config:
Port 1 is plugged into g0/2 with the following config
interface GigabitEthernet0/2
switchport trunk allowed vlan 1,3,102,111,1001
switchport mode trunk
spanning-tree portfast
Port 2 is plugged into fa0/47 and just has switchport mode trunk.
How can I get the interface to work with the proper IP range for vlan 1001?

I finally had a chance to fiddle around with this issue again and have some more information on the problem. It appears to not be an issue with the IP address, but rather with the VLAN. The 172.17.0.0/16 subnet is on VLAN 1001 which it appears the WLC does not care for. This problem is repeatable on the following versions of code that I have tried:
7.0.220.0
7.1.91.0
7.4.110.0 (Not in use for production until we upgrade from WCS to Prime.)
Any thoughts? Moving the 1001 VLAN to another number would be a HUGE undertaking so if there is not an answer within the firmware on the WLC, I will have to bridge two VLANs with bpdufilter enabled... Not my first choice for sure...

Problem with JPA @Embeddable class field in @Embedded

I have a Embeddable class and Embadded in all of my JPA Entities, the version(in DBUniqueId) field is mandatory for some JPA Entities and for others it should not be present.
My DBUser.java JPA Entity shouldn't have version field(DBUser table doesn't have one) and so I didn't include it in @AttributeOverrides of DBUser.java. when I try to run the JPA query it results in exception
Query:
List<DBUser> userList = (List<DBUser>)entityManager.createQuery(SELECT u FROM DBUser u WHERE u.userId.root=?1 AND u.userId.extension=?2).setParameter(1,"root1").setParameter(2,"ext1").getResultList ();
And The Exception is:
---- Begin backtrace for Nested Throwables
java.sql.SQLException: ORA-00904: "T0"."VERSION": invalid identifier
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:74)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:131)
How do I inform to JPA Entity to ignore only the version field of the Embeddable in my JPA Entity @Embedded place.
So the above query can successful. Thank You!
Please guide me to solve this problem.
@Embeddable
@MappedSuperclass
public class DBUniqueId implements Serializable {
* serialVersionUID.
private static final long serialVersionUID = 8903598739796209331L;
* root.
private String root;
* extension.
private String extension;
* version.
private String version;
     //Getters & Setters
@Entity
@Table(name = "MyTable", schema = "MySchema")
public class DBUser implements Serializable {
* unique user id.
private DBUniqueId uniqueUserId;
* Get the unique user id.
* @return <code>DBUniqueId</code> - unique person id
@Embedded
@AttributeOverrides( {
@AttributeOverride(name = "root", column = @Column(name = "LUSR02_ID_ROOT", nullable = true, length = 50)),
@AttributeOverride(name = "extension", column = @Column(name = "LUSR02_ID_EXT", nullable = true, length = 50))
public DBUniqueId getUserId () {
return uniqueUserId;
* set user unique id.
* @param uniqueId - unique id of the person
public void setUserId (final DBUniqueId uniqueId) {
this.uniqueUserId = uniqueId;
}

Sudeep Naidu wrote:
Hello gimbal2,
Thanks for your response...
In my project I have created a class with name DBVersionUniqueId but my lead said no to it.
Only DBUniqueId should be used and make it work with or with out version fields.
I tried experimenting around, but didn't succeed.
Please Suggest some solution to make it work with DBUniqueId class.
Thank You.No, let your lead write the code. He/she seems to be the expert. I certainly have no clue how to do it and honestly I also cannot find any reason why it should be possible. Let me put what is required in other words:
- you have an entity with three properties, all of which are not transient. This means these properties map to three columns in the database according to the JPA specs.
- you have a table with only two properties
- you must and you shall use the object with three properties but at the same time one of the fields must all of a sudden be ignored by the persistence provider
It makes no sense to want to do that.
Correct answer: create a new object with only the two fields so the database and the object model match exactly
Wrong answer: try to create workarounds that in six months time nobody is going to understand why the hell it was done that way

Has Yosemite fixed Maverick's Mail problem with Group email addresses?

Does anyone know if Yosemite has fixed the problem that Maverick's Mail program had with Contacts? Maverick's Mail program cannot show Group Address names in the email "To:" window. By default, it shows all of the email addresses in a Group rather than the Group name. The work-around requires putting Group Addresses in the "Bcc:" window. Has that problem been fixed in Yosemite?
Many thanks,
Bob Winckler

Hi Barney,
Just found out that Maverick's problem with Mail's Group address procedure has resulted in my email accounts being put on hold by my Internet Provider. I'm the president of a local club, and I routinely send out emails to 200+ email addresses several times a month. Since Maverick's Mail now doesn't keep Group addresses hidden when shown in the email "To:" window, we have to put those Group addresses into the "Bcc:" window. The first couple of times that I did that, the emails went through, but the third time that I tried to send out such an email, my Internet Provider shut down my email account with the statement "Your ability to send new mail has been suspended as a high volume of suspicious mail has been sent from your account recently. Please contact your IT administrator." The IT administrator required me to run a virus check and then set a new password for my account before they would reactivate it. In my discussions with several of my Internet Provideer's tech reps, it appears that the way the way that the Internet Provider has their server's security system set, a high volume of email addresses in the "Bcc:" section of emails is enough to shut down an account as suspicious. Until Apple gets this problem fixed, my only options are to switch internet providers (after finding one that will let high volumes of "Bcc:" go through) or switch to an older Mac operating system, which I've done (now using an ancient iMac 400DV running Tiger (OS 10.4.11). Given the high number of businesses, etc., likely to be using Macs, I'm really surprised that Apple has let this problem with Maverick's Mail program go uncorrected.
Best regards,
Bob W

IPhone SDK question. Problems with Addressbook and Addresses.

I know the api is closed as of beta but I have serious problems adding street, zip and city terms to the multivalue address property. I am doing an application for release around the new model of iphone and any information about how to use the address property would be great. I can say, phone numbers I can add as many as I like as of now its only addresses I have problems with, and sadly I can't find information anywhere, including the SDK documentation how to write these properties to a record.
I hope any of you can help me or give me a number I can call for help directly from apple.
Thank you in advance.
/Klaus

I still wonder about this, but I got a new issue and that is adding a "default" photo to the address record I am creating.
I try load my application icon from the application resources to add it to the addressbook record.
NSString* imageName = [[[NSBundle mainBundle] pathForResource:@"Icon.png" ofType:nil]];
NSData *iconData = [[NSData alloc] initWithContentsOfFile:imageName];
ABPersonSetImageData(person, [[iconData bytes]], nil);
Ugh the iconData gets allocated and initedWithContentsOfFile imageName. And yes it loads. Offtopic, how to mark segments as code so no fancy functions strip text and whitespace from my code exampes on the forum?
But get bad access when I try add the image to the record. I know there was some articles on blogs about this last week, but seems like they been pulled off now.

Sync problem with Yahoo! Address Book

In iTunes I selected the option to have my iPhone contacts list synced with my Yahoo! Address Book. I have added some contacts directly into my iPhone. When I then subsequently sync'ed my iPhone with iTunes, those contacts disappeared I added through my iPhone disappeared. But if I add the contacts online in my Yahoo! Address book, those contacts sync fine with my iPhone. How do I get my iPhone to sync properly with my Yahoo! Address book?

elil_sasi wrote:
I found my yahoo address book lost in my Z10 phone. All other e-mail account and local contacts are fine. Yahoo address book show no contact. However no problem with yahoo mail keep come but address book unable to sync or load. I have deleted the account and recreate the same account; mail and calendar are OK, no luck with Address Book. I also tried with CardDav as Yahoo directed. Phone refused to create the Yahoo address book and say the “Service Provider blocking this..?” I cannot understand what the service providers do with my personal yahoo address book? I had the yahoo address book before in the same phone for months. Now no longer
Any help to re-store this address book and sync with Z10 will highly appreciated
Thanks
SASI
I ahve the same problem, I had to re-intall the OS on my phone and since then both of my Rogers email account are refusing to let me access the CARDDAV.
When I try to add the CARDDAV I get the following error : At This Time Your Contacts Account Can`t Be Added. Please Try Again Later
I have been trying daily for the past two weeks with no success, and the same thing is happening on the PlayBook (I tried to change the password on the accounts to see if it would solve the problem)
Using the Playbook and the Z10 and the Z30 and loving them
Martin

Problem with Groups from Address Book in Apple Mail

I have set up a group in my address book. When I use Apple Mail I use this group to send specific messages to. But for some reason I keep getting error messages saying that my outgoing sever encountered a problem with the messgae. It only happens when I send messages with a group, not if I send messages to single recipients. The group consists of 90 emails, so I can't enter their emails each time I want to send a message to the group.
Thanks in advance,
Regards

I am having a similar problem. All the addresses are correct, and I know this because I use them all the time with no errors. BUT when bundled into a group - actually any group I set up I cannot send successfully. I have two groups in my mail program and neither will work.

Problem with Recognition of Address field

Similar Messages

Maybe you are looking for