Problem with recording and sound on Pavilion ze1000 series
I have an old Hp Pavilion ze 1250 running Windows XP (sp2) with 1gb Ram.
I'm trying to convert some cassette tapes to digital (with Audacity).
My problem: When I try to record using Audacity, it records about 10 seconds and then hangs. When I click Stop and try to play the 10 seconds back, it freezes and won't play anything. (After that, even if I import an mp3 file to work on, it won't play that either.) It also causes all the sound to go off throughout the computer. Songs will "play" in WMP but there's no sound in the speakers or headphones. (The Microsoft logo music won't play either when I turn the computer off.) I've tried resetting the volume and checking if anything is muted. Nothing .
I restart the computer and everything is fine.....sound works and Audacity plays.....until I try to record again.
I thought that this was only an Audacity problem....until I tried to record 60 seconds through Sound Recorder. The exact thing happens. It records about 10 seconds of audio, then freezes and refuses to playback. All the sound goes off throughout the computer and nothing solves it except Restart.
My sound/audio device is Conexant AC-Link Audio.
The Sound Playback, Sound Recording, Voice Playback, and Voice Recording are all defaulted to HP VIA Audio.
I have updated the audio driver. Recording is enabled. Is there something else I need to do?
Thanks.
Thank you for your reply.
I'll try some of those suggestions and see if that helps.
Similar Messages
-
Hi!
I've a problem with KDE and sound.
When KDE shows a alert the alert's sound sounds with delay. 3-5 seconds.
Same happens with kde start.
Can anybody help me?
Thanks!Pilli wrote:
Hi!
I've a problem with KDE and sound.
When KDE shows a alert the alert's sound sounds with delay. 3-5 seconds.
Same happens with kde start.
Can anybody help me?
Thanks!
Change the player to mplayer or something in the control panel (Sound and Multimedia - System notifications - Player Settings). -
Importing from photo booth, problems with length and sound
I have a 15 min (277 MB) video clip from photo booth that I would like to post to youtube. I can't get it to work and have been wrestling with a few different programs:
When opening the clip in Quicktime, there is no sound. I can open with VLC media player and the sound is fine.
The clip is too long to import to youtube, so i need to edit it into two sections. However, when try to import the clip into iMovie HD 6, the program crashes (maybe because it is again too long?).
So I purchased Quicktime pro so I could edit the clip. I am able to do this fine, but still have the sound problem. When I saved the edited version, and try to open with VLC, still no sound. Same with iMovie, I can import the smaller clip, but no sound.
I now realize that photobooth is less than ideal for long clips...but we got carried away.
Any input would be appreciated!I use KDE, but I had sound issues too when I tried Gnome, and just couldn't get it to work right (One of the reasons I use KDE) but if I remember correctly, I needed to install the esd sound daemon and add it to /etc/rc.conf to get sound in gnome.
-
Problem with preloader and sounds
Hello everyone,
I am making a movie that has 12 sound files in it. I am
having trouble getting this to work with a preloader. I was using a
seperate flash movie and using the movieClipLoader to load in the
movie that has the sounds in it. However my employer wishes to have
everything in a single swf file. I know the concept, that the
sounds in the movie using attachSound need to be loaded before
first frame... but I need the preloader to take them into
account... how do I do that? I tried putting my preloader on frame
one, then had 12 keyframes in a row and just dragged the sounds
onto the stage (one for each keyframe there), and then the main
movie starts on frame 14... but that stil doesnt work... how can i
do this?Just to let anyone know... I did figure this out on my own...
it makes it messy though and I dont like it... buuuuut what are you
going to do... I had to set the linkage in each sound in the
library to export and then uncheck the export in first frame...
then i had to create keyframes for each sound and put it on the
stage in frames 2-13. Preloader on frame 1 and main movie on frame
14... it works now. -
I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?
- Try insering and removing the headphone plug a dozen times or so.
- Try cleaning out the headphone jack in the iPod.
- Resett he iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restoe to factory defaults/new iPod
If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
If not underwarranty Apple will only exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Here is one. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I got my iPhone 4S and I think I have a problem with it. Sound when locking and unlocking is quiet compared with other iPhone 4S. I compared it with others and really is a little quiet. Other people have confirmed it too. Other sounds may be better. No problem tones, watching videos. This problem or is it something normal?
I have this problem too, but it is intermittent. Sometimes the lock/unlock volume will drop to barely-audible, even though in settings the volume slider hasn't changed. If I then move the volume slider, it fixes the problem and the lock sounds jump back to normal, but then later on the problem will happen again.
-
Try to use Echo/Sound test service, as well as a couple friends on the list and get the following message "Problem with recording device". I have also searched in the community, but found many issues releated, but no solutions that fit the problem. Headset: Turtle Beach XP SevenSkype Version: 6.22.81.105Operating System: Windows 7 Ultimate Service Pack 1; 64 - bit Tested in sound recorder, and records my voice, and able to playback and hear my horrible singing. I did find a rather odd way to resolve the issue temporarily. I also use hangouts from time to time, and when I start a video call, it will ring, and send out, and I can then call out using skype to a friend/sound test and it will work fine for the rest of the call. Able to talk, and do whatever. Unfortunatley, with the listed method above I have to repeat the process everytime I want to make a call, or accept someones call. Rather... Annoying. Any solution to this, or what can be causing this issue?
I suggest you download and install the latest generic Realtek audio drivers as they should be compatible with the computer model you listed in a previous post. I run a similar model to that one and have no issues with it. Skype is rather resource intensive on that netbook when participating in video calls due to the limitations of the processor and onboard video chipset. The latest generic Realtek audio drivers (Select "High Definition Audio Codecs" - 32 bit Windows 7)http://www.realtek.com/downloads/okay, i have pretty much given up trying to use Skype on this netbook but i came back to report the known data just in case anyone else might find it useful. to begin with 1) let's get this upfront. i am ignorant, ill-informed, tech-illerate and stupid. i stipulate to this going in. i've NO idea what the hell i'm doing. 2) hardware = ASUS eeePC1005HA, Win7Starter32, 1G DDR2, Intel Atom280, 250GHDD 3) per the above suggestion i went to the RealTek site and looked for the driver, but first 4) i had SlimDriver look around for me and it said there was a newer driver (i think dated 2011) which i had it download & install 5) so that didn't seem to make the slightest difference in Skype performance (i.e. none) so 6)as in (3) above i went to http://152.104.125.41/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false and it offered me 2 choices of sites from which to download Version R2.78 for 32bit Win7 so i picked one at random and it downloaded 2 files, 1 a .exe and the other a PART which i have no idea what the hell that is. i barely know enuf to double clic on the filename in WinExplorer Downloads so that's what i did first on the .exe file cuz that one had a file size greater than zero (unlike the PART file) and got an error message saying Win7 didn't know what to do with this file and could i please suggest a software to use on it. 7) so i deleted it and started over with the same result and then i repeated step 7) only this time i got only the .exe file in my Downloads folder and when i double-clicked it i actually got the Install Wizard to run. 9) so while the Wizard was running i went and looked in my "Windows 7 In Depth" by Cowart & Knittel and found nothing in the index under RealTek so i went and looked at Drivers and based on clues i found there i went to Control Panel ->Hardware & Sound -> Device Manager ->RealTek HD Audio [hidden under expandable Processors - Sound, Video & game conrollers]->(LeftClick to get Update Driver Software), and wait about a year and a half for 'Onliine Search for Software', followed by the message "the best driver software for your device is already installed". 9)so by this time the Install Wizard has finished Uninstalling the previous version of the driver and wants me to RESTART and that's right now in real time so i am now closing this browser and if i ever finish restarting i will continue this response in a new reply window starting with step (10), whatever that turns out to be. the suspense is killing me.
-
Problem with SB1240 USB sound card
I'm pulling hair here! I've just bought a SB240. Windows (XP Pro, SP3) detected it and I can select it fine for listening. But when I open Sound and Audio Device Properties and select Sound Recording/Volume, I see the Capture panel with the three inputs, but all the controls are greyed out and immovable. I also use the application "Total Recorder" by High Criteria, in which I can select the SB240 device but the only input line it sees is SPDIF Interface.
I'm stumped. Can anyone help?
John?&Re: Problem with SB240 USB sound card
Thank you. I did a complete uninstall, including the device itself (from Device Manager) as well as all drivers and any SB related software. As recommended by Creative, I had previously installed the driver software from the supplied CD and that seems to have been the problem.
I let Windows re-detect the SB, but? got a "problem ... device may not work correctly.." during the detection, so I was not hopeful (this had not happened the first time I installed the device).
Nevertheless it now does work fully and is properly configured in "Total Recorder" too.
So I would suggest not using the supplied drivers and software - at least not in WinXP. But it's not very confidence inspiring.
John -
Problem with Speaker and Headset in Windows Vista
Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
Regards,EdwinWhen you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have). -
Problem with Roles and Triggers
I'm having a strange problem with Roles and Triggers in Oracle. It's a little difficult to describe, so bear with me...
I'm trying to create a trigger that inserts records into a table belonging to a different user/owner. Of course, the owner of this trigger needs rights to insert records into this other table. I find that if I add these rights directly to the owner of the trigger, everything works okay and the trigger compiles successfully.
However, if I first create a Role and grant the "insert" rights to it, and then assign this role to the owner of the trigger, the trigger does not compile successfully.
To illustrate this, here's an example script. I'm using Oracle 10g Release 2...
-- Clean up...
DROP TABLE TestUser.TrigTable;
DROP TABLE TestUser2.TestTable;
DROP ROLE TestRole;
DROP TRIGGER TestUser.TestTrigger;
DROP USER TestUser CASCADE;
DROP USER TestUser2 CASCADE;
-- Create Users...
CREATE USER TestUser IDENTIFIED BY password DEFAULT TABLESPACE "USERS" TEMPORARY TABLESPACE "TEMP" QUOTA UNLIMITED ON "USERS";
CREATE USER TestUser2 IDENTIFIED BY password DEFAULT TABLESPACE "USERS" TEMPORARY TABLESPACE "TEMP" QUOTA UNLIMITED ON "USERS";
CREATE TABLE TestUser.TrigTable (TestColumn VARCHAR2(40));
CREATE TABLE TestUser2.TestTable (TestColumn VARCHAR2(40));
-- Grant Insert rights on TestTable to TestRole...
CREATE ROLE TestRole NOT IDENTIFIED;
GRANT INSERT ON TestUser2.TestTable TO TestRole;
-- Add TestRole to TestUser. TestUser should now have rights to INSERT on TestTable
GRANT TestRole TO TestUser;
ALTER USER TestUser DEFAULT ROLE ALL;
-- Now, create the trigger. This compiles unsuccessfully...
CREATE TRIGGER TestUser.TestTrigger AFTER INSERT ON TestUser.TrigTable
BEGIN
INSERT INTO TestUser2.TestTable (TestColumn) VALUES ('Test');
END;
When I do a "SHOW ERRORS;" after this, I get:
SQL> show errors;
Errors for TRIGGER TESTUSER.TESTTRIGGER:
LINE/COL ERROR
2/3 PL/SQL: SQL Statement ignored
2/25 PL/SQL: ORA-00942: table or view does not exist
SQL>
As I said above, if I just add the Insert rights directly to TestUser, the trigger compiles perfectly. Does anyone know why this is happening?
Thanks!
AdrianHi Raghu,
If the insert rights exist only on TestRole, and TestRole is assigned to TestUser, I can do the INSERT statement you suggest with no problems if I just execute it from SQLPlus (logged in as TestUser).
The question is, why does the same INSERT fail when it's inside the trigger? -
Problem with writing and reading using serialization
I am having a problem with writing and reading an object that has another object in it. The purpose of the class is to write a order that has multiple items in it. And there will be several orders. This is for an IB project, where one of the requirements is to utilize a hierarchical composite data structure. That is, it is "one that contains more than one element and at least one of the elements is a composite data structure. Examples are, an array or linked list of records, a record that has one field that is another record, or an array". The code is shown below:
The error produced is
java.lang.NullPointerException
at SamsonRubberIndustries.CustomerOrderDetails.createCustOrdDetailsScreen(CustomerOrderDetails.java:150)
at SamsonRubberIndustries.CustomerOrderDetails$1.run(CustomerOrderDetails.java:78)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
public class CustOrdObject implements Serializable {
public int CustID;
public int CustOrderID;
public Object OrderDate;
public InnerCustOrdObject[] innerCustOrdObj;
public float GrandTotal;
public int MaxItems;
public CustOrdObject() {}
public CustOrdObject(InnerCustOrdObject[] innerCustOrdObj,
int CustID, int CustOrderID, Object OrderDate,
float GrandTotal, int innerarrlength, int innerarrpos, int MaxItems) {
this.CustID = CustID;
this.CustOrderID = CustOrderID;
this.OrderDate = OrderDate;
this.GrandTotal = GrandTotal;
this.MaxItems = MaxItems;
this.innerCustOrdObj = new InnerCustOrdObject[MaxItems];
public InnerCustOrdObject[] getInnerCustOrdObj() {
return innerCustOrdObj;
public void setInnerCustOrdObj(InnerCustOrdObject[] innerCustOrdObj) {
this.innerCustOrdObj = innerCustOrdObj;
public int getCustID() {
return CustID;
public void setCustID(int custID) {
CustID = custID;
public int getCustOrderID() {
return CustOrderID;
public void setCustOrderID(int custOrderID) {
CustOrderID = custOrderID;
public Object getOrderDate() {
return OrderDate;
public void setOrderDate(Object orderDate) {
OrderDate = orderDate;
public void setGrandTotal(float grandTotal) {
GrandTotal = grandTotal;
public float getGrandTotal() {
return GrandTotal;
public int getMaxItems() {
return MaxItems;
public void setMaxItems(int maxItems) {
MaxItems = maxItems;
public class InnerCustOrdObject implements Serializable{
public int ItemNumber;
public float UnitPrice;
public int QuantityRequired;
public float TotalPrice;
public InnerCustOrdObject() {}
public InnerCustOrdObject(int ItemNumber, float
UnitPrice, int QuantityRequired, float TotalPrice){
this.ItemNumber = ItemNumber;
this.UnitPrice = UnitPrice;
this.QuantityRequired = QuantityRequired;
this.TotalPrice = TotalPrice;
public int getItemNumber() {
return ItemNumber;
public void setItemNumber(int itemNumber) {
ItemNumber = itemNumber;
public int getQuantityRequired() {
return QuantityRequired;
public void setQuantityRequired(int quantityRequired) {
QuantityRequired = quantityRequired;
public float getTotalPrice() {
return TotalPrice;
public void setTotalPrice(float totalPrice) {
TotalPrice = totalPrice;
public float getUnitPrice() {
return UnitPrice;
public void setUnitPrice(float unitPrice) {
UnitPrice = unitPrice;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.text.SimpleDateFormat;
import java.util.Date;
import javax.swing.*;
import javax.swing.table.DefaultTableCellRenderer;
import javax.swing.table.DefaultTableModel;
public class CustomerOrderDetails extends CommonFeatures{
//TODO
private static int MAX_ORDERS = 200;
private static int MAX_ORDERITEMS = 100;
private static int MaxRecord;
private static int CurrentRecord = 1;
private static int currentItem;
private static int MaxItems;
private static boolean FileExists, recFileExists;
private static CustOrdObject[] orderDetails = new CustOrdObject[MAX_ORDERS];
private static InnerCustOrdObject[] innerCustOrdObj = new InnerCustOrdObject[MAX_ORDERITEMS];
private static File OrderDetailsFile = new File("CustOrdDetails.dat");
private static File OrdRecordNumStore = new File("OrdRecordNumStore.txt");
private static PrintWriter writeFile;
private static BufferedReader readFile;
private static ObjectOutputStream objOut;
private static ObjectInputStream objIn;
//Set format for date
SimpleDateFormat simpleDF = new SimpleDateFormat("dd MM yyyy");
//--<BEGINNING>--Declaring Interface Variables------------------------------------------//
private JPanel innertoppanel, innercenterpanel, innerbottompanel, innerrightpanel, innerleftpanel;
private JLabel CustIDLbl, CustOrderIDLbl, OrderedDateLbl, GrandTotLbl, ItemNumberLbl,UnitPriceLbl, QuantityReqLbl, TotPriceLbl;
private JTextField CustIDTxt, CustOrderIDTxt, OrderedDateTxt, GrandTotTxt, ItemNumberTxt, UnitPriceTxt, QuantityReqTxt, TotPriceTxt;
private JButton addrecordbtn, savebtn, externalprevbtn, externalnextbtn, internalprevbtn, internalnextbtn, gotorecordbtn, additemreqbtn;
//--<END>--Declaring Interface Variables------------------------------------------------//
public static void main(String[] args) {
final CustomerOrderDetails COD = new CustomerOrderDetails();
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
try {
UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
COD.createCustOrdDetailsScreen();
} catch (Exception eb) {
eb.printStackTrace();
//--<BEGINNING>--Creating CustomerOrderDetails Screen---------------------------------------//
public JFrame createCustOrdDetailsScreen() {
createDefaultFrame();
mainframe.setSize(800,500);
createContainerPanel();
containerpanel.add(createCustOrdDetailsTitle(), BorderLayout.NORTH);
containerpanel.add(createCustOrdDetailsMainPanel(), BorderLayout.CENTER);
//containerpanel.add(createCustOrdDetailsLeftNavButtons(), BorderLayout.WEST);
//containerpanel.add(createCustOrdDetailsRightNavButtons(), BorderLayout.EAST);
containerpanel.add(createCustOrdDetailsButtons(), BorderLayout.SOUTH);
mainframe.setContentPane(containerpanel);
mainframe.setLocationRelativeTo(null);
mainframe.setVisible(true);
//--<BEGINNING>--Checks to see whether CRecordNumberStore file exists-------------------------------//
if (OrdRecordNumStore.exists() == true) {
recFileExists = true;
}else {
recFileExists = false;
if (recFileExists == true) {
MaxRecord = readRecordNumber();
CurrentRecord = MaxRecord;
//readOrder();
//readInnerOrderRecord(CurrentRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
}else{
MaxRecord = 1;
writeRecordNumber(MaxRecord);
CustOrderIDTxt.setText(""+MaxRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
//--<END>--Checks to see whether CRecordNumberStore file exists--------------------------------------//
if(readOrder() != null){
orderDetails = (CustOrdObject[]) readOrder();
innerCustOrdObj = orderDetails[CurrentRecord].getInnerCustOrdObj();
MaxItems = orderDetails[CurrentRecord].getMaxItems();
if(CurrentRecord > 1 && CurrentRecord < MaxRecord){
externalnextbtn.setEnabled(true);
externalprevbtn.setEnabled(true);
if(CurrentRecord >= MaxRecord){
externalnextbtn.setEnabled(false);
getFieldText(CurrentRecord-1);
}else{
orderDetails[CurrentRecord] = new CustOrdObject();
currentItem = 1;
return mainframe;
//--<END>--Creating CustomerOrderDetails Screen---------------------------------------------//
public JPanel createCustOrdDetailsTitle(){
createTitlePanel();
titlepanel.setBackground(TxtfontColor);
label.setText("- Customer Order Details -");
labelpanel.setBackground(TxtfontColor);
label.setForeground(Color.white);
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor) ;
buttonpanel.add(createReturnToMainMenuButton());
titlepanel.add(labelpanel, BorderLayout.WEST);
titlepanel.add(buttonpanel, BorderLayout.EAST);
return titlepanel;
public JPanel createCustOrdDetailsMainPanel(){
createmainpanel();
mainpanel.setBackground(TxtfontColor);
mainpanel.setLayout(new BorderLayout());
mainpanel.setBorder(BorderFactory.createTitledBorder(""));
mainpanel.add(createInnerTopPanel(), BorderLayout.NORTH);
mainpanel.add(createInnerCenterPanel(), BorderLayout.CENTER);
mainpanel.add(createInnerBottomPanel(), BorderLayout.SOUTH);
mainpanel.add(createInnerRightPanel(), BorderLayout.EAST);
mainpanel.add(createInnerLeftPanel(), BorderLayout.WEST);
return mainpanel;
public JPanel createInnerTopPanel(){
innertoppanel = new JPanel(new GridBagLayout());
innertoppanel.setBackground(TxtfontColor);
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
CustIDLbl = new JLabel("Customer ID");
CustIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustIDLbl.setFont(font);
CustIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innertoppanel.add(CustIDLbl, GBC);
CustIDTxt = new JTextField(20);
CustIDTxt.setEditable(true);
GBC.gridx = 2;
GBC.gridy = 1;
innertoppanel.add(CustIDTxt, GBC);
GBC.gridx = 3;
GBC.gridy = 1;
innertoppanel.add(Box.createHorizontalStrut(220), GBC);
OrderedDateLbl = new JLabel("Order Date");
OrderedDateLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
OrderedDateLbl.setFont(font);
OrderedDateLbl.setForeground(LblfontColor);
GBC.gridx = 4;
GBC.gridy = 1;
innertoppanel.add(OrderedDateLbl, GBC);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt = new JTextField(simpleDF.format(todaydate), 20);
OrderedDateTxt.setHorizontalAlignment(JTextField.CENTER);
OrderedDateTxt.setEditable(false);
GBC.gridx = 5;
GBC.gridy = 1;
innertoppanel.add(OrderedDateTxt, GBC);
CustOrderIDLbl = new JLabel("Customer Order ID");
CustOrderIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustOrderIDLbl.setFont(font);
CustOrderIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDLbl, GBC);
CustOrderIDTxt = new JTextField(20);
CustOrderIDTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDTxt, GBC);
return innertoppanel;
public JPanel createInnerCenterPanel(){
innercenterpanel = new JPanel(new GridBagLayout());
innercenterpanel.setBackground(TxtfontColor);
innercenterpanel.setBorder(BorderFactory.createLoweredBevelBorder());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
ItemNumberLbl = new JLabel("Item Number");
ItemNumberLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
ItemNumberLbl.setFont(font);
ItemNumberLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberLbl, GBC);
ItemNumberTxt = new JTextField(20);
GBC.gridx = 2;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberTxt, GBC);
UnitPriceLbl = new JLabel("Unit Price");
UnitPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
UnitPriceLbl.setFont(font);
UnitPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceLbl, GBC);
UnitPriceTxt = new JTextField(20);
//UnitPriceTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceTxt, GBC);
QuantityReqLbl = new JLabel("Quantity Required");
QuantityReqLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
QuantityReqLbl.setFont(font);
QuantityReqLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqLbl, GBC);
QuantityReqTxt = new JTextField(20);
//QuantityReqTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqTxt, GBC);
TotPriceLbl = new JLabel("Total Price");
TotPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
TotPriceLbl.setFont(font);
TotPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 4;
innercenterpanel.add(TotPriceLbl, GBC);
TotPriceTxt = new JTextField(20);
//TotPriceTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 4;
innercenterpanel.add(TotPriceTxt, GBC);
return innercenterpanel;
public JPanel createInnerBottomPanel(){
innerbottompanel = new JPanel(new FlowLayout(FlowLayout.RIGHT));
innerbottompanel.setBackground(TxtfontColor);
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
GrandTotLbl = new JLabel("Grand Total");
GrandTotLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
GrandTotLbl.setFont(font);
GrandTotLbl.setForeground(LblfontColor);
innerbottompanel.add(GrandTotLbl);
innerbottompanel.add(Box.createHorizontalStrut(30));
GrandTotTxt = new JTextField(20);
innerbottompanel.add(GrandTotTxt);
return innerbottompanel;
public JPanel createInnerRightPanel(){
innerrightpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerrightpanel.setBackground(TxtfontColor);
innerrightpanel.setLayout(new BoxLayout(navrightpanel, BoxLayout.Y_AXIS));
innerrightpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerrightpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalnextbtn = new JButton(createNextButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
//getInnerFieldText(currentItem);
internalprevbtn.setEnabled(true);
if(currentItem < MaxItems){
++CurrentRecord;
//readOrder();
//readInnerOrderRecord(CurrentRecord);
setInnerFieldText(currentItem);
System.out.println(CurrentRecord);//Checking RECORD_NUM
if(currentItem == MaxItems){
internalnextbtn.setEnabled(false);
innerrightpanel.add(internalnextbtn, GBC);
return innerrightpanel;
public JPanel createInnerLeftPanel(){
innerleftpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerleftpanel.setBackground(TxtfontColor);
innerleftpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerleftpanel.setForeground(Color.BLACK);
innerleftpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalprevbtn = new JButton(createPreviousButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
//getInnerFieldText(currentItem);
internalnextbtn.setEnabled(true);
if(currentItem == 1){
internalprevbtn.setEnabled(false);
if(currentItem > 0){
--currentItem;
//readOrder();
setInnerFieldText(currentItem);
innerleftpanel.add(internalprevbtn, GBC);
return innerleftpanel;
public JPanel createCustOrdDetailsButtons(){
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor);
externalprevbtn = new JButton(createPreviousButtonIcon());
externalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalnextbtn.setEnabled(true);
if(CurrentRecord == 1){
externalprevbtn.setEnabled(false);
if(CurrentRecord > 0){
--CurrentRecord;
setFieldText(CurrentRecord);
System.out.println(CurrentRecord);//Checking RECORD_NUM
buttonpanel.add(externalprevbtn);
addrecordbtn = new JButton("Add Record", createAddButtonIcon());
addrecordbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
MaxRecord = readRecordNumber();
MaxRecord++;
writeRecordNumber(MaxRecord);
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
CustIDTxt.setText("");
CustOrderIDTxt.setText(""+MaxRecord);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt.setText(""+simpleDF.format(todaydate));
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
GrandTotTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
externalnextbtn.setEnabled(false);
externalprevbtn.setEnabled(true);
System.out.println(MaxRecord);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(addrecordbtn);
savebtn = new JButton("Save Data", createSaveButtonIcon());
savebtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
setFieldText(CurrentRecord);
writeOrder();
writeRecordNumber(MaxRecord);
System.out.println(CurrentRecord);
System.out.println(MaxRecord);
buttonpanel.add(savebtn);
java.net.URL imageURL_AddRowIcon = CommonFeatures.class.getResource("Icons/edit_add.png");
ImageIcon AddRowIcon = new ImageIcon(imageURL_AddRowIcon);
additemreqbtn = new JButton("Add Item", AddRowIcon);
additemreqbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
//CurrentRecord = MaxRecord;
currentItem++;
setInnerFieldText(currentItem);
internalnextbtn.setEnabled(false);
internalprevbtn.setEnabled(true);
System.out.println(MaxRecord);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(additemreqbtn);
externalnextbtn = new JButton(createNextButtonIcon());
externalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalprevbtn.setEnabled(true);
if(CurrentRecord < MaxRecord){
++CurrentRecord;
setFieldText(CurrentRecord);
System.out.println(CurrentRecord);//Checking RECORD_NUM
if(CurrentRecord == MaxRecord){
externalnextbtn.setEnabled(false);
buttonpanel.add(externalnextbtn);
return buttonpanel;
//TODO
public void setFieldText(int orderID){//TODO
orderDetails[orderID].setCustID(Integer.parseInt(CustIDTxt.getText()));
orderDetails[orderID].setCustOrderID(Integer.parseInt(CustOrderIDTxt.getText()));
orderDetails[orderID].setOrderDate(OrderedDateTxt.getText());
orderDetails[orderID].setInnerCustOrdObj(innerCustOrdObj);
orderDetails[orderID].setMaxItems(MaxItems);
setInnerFieldText(currentItem);
orderDetails[orderID].setGrandTotal(Float.parseFloat(GrandTotTxt.getText()));
public void setInnerFieldText(int currentItem){//TODO
innerCustOrdObj[currentItem] = new InnerCustOrdObject();
innerCustOrdObj[currentItem].setItemNumber(Integer.parseInt(ItemNumberTxt.getText()));
innerCustOrdObj[currentItem].setUnitPrice(Float.parseFloat(UnitPriceTxt.getText()));
innerCustOrdObj[currentItem].setQuantityRequired(Integer.parseInt(QuantityReqTxt.getText()));
innerCustOrdObj[currentItem].setTotalPrice(Float.parseFloat(TotPriceTxt.getText()));
public void getFieldText(int orderID){
CustIDTxt.setText(Integer.toString(orderDetails[orderID].getCustID()));
CustOrderIDTxt.setText(Integer.toString(orderDetails[orderID].getCustOrderID()));
OrderedDateTxt.setText(""+orderDetails[orderID].getOrderDate());
currentItem = orderDetails[orderID].getMaxItems();
System.err.println("currentItem" + currentItem);
getInnerFieldText(currentItem);
GrandTotTxt.setText(Float.toString(orderDetails[orderID].getGrandTotal()));
public void getInnerFieldText(int currentItem){
ItemNumberTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getItemNumber()));
UnitPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getUnitPrice()));
QuantityReqTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getQuantityRequired()));
TotPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getTotalPrice()));
public void writeOrder(){//TODO
try {
objOut = new ObjectOutputStream(new FileOutputStream(OrderDetailsFile));
objOut.writeObject(orderDetails);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
} catch (IOException e) {
e.printStackTrace();
public Object readOrder(){
Object temporaryObj;
try{
objIn = new ObjectInputStream(new FileInputStream(OrderDetailsFile));
temporaryObj = objIn.readObject();
CustOrdObject[] blah = (CustOrdObject[]) temporaryObj;
System.out.println("Outer: "+blah[1].getCustID());
InnerCustOrdObject[] whee = blah[1].getInnerCustOrdObj();
System.out.println("Inner: "+whee[1].getItemNumber());
objIn.close();
System.out.println("Read Worky!");
return temporaryObj;
}catch(Exception e){
e.printStackTrace();
System.out.println("Read No Worky!");
return null;
public void writeRecordNumber(int MaxRecord){
try{
objOut = new ObjectOutputStream(new FileOutputStream(OrdRecordNumStore));
objOut.writeObject(MaxRecord);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
}catch(Exception e){e.printStackTrace();}
public int readRecordNumber() {
try {
objIn = new ObjectInputStream(new FileInputStream(OrdRecordNumStore));
int temporaryObj = Integer.parseInt(objIn.readObject().toString());
objIn.close();
System.out.println("Read Number Worky!");
return temporaryObj;
} catch (Exception e) {
e.printStackTrace();
System.out.println("Read Number No Worky!");
return -1;
}Message was edited by:
Kilik07
Message was edited by:
Kilik07ok i got reading to work to a certain extent... but the prob is i cnt seem to save my innerCustOrdObj proprly...when ever i look for a record using the gotorecordbtn, the outerobject, which is the orderDetails, seems to change but the innerCustOrdObj remains the same... heres the new code..
public class CustomerOrderDetails extends CommonFeatures{
//TODO
private static int MAX_ORDERS = 200;
private static int MAX_ORDERITEMS = 100;
private static int MaxRecord;
private static int CurrentRecord = 1;
private static int currentItem;
private static int MaxItems = 1;
private static boolean FileExists, recFileExists;
private static boolean RecordExists;
private static CustOrdObject[] orderDetails = new CustOrdObject[MAX_ORDERS];
private static InnerCustOrdObject[] innerCustOrdObj = new InnerCustOrdObject[MAX_ORDERITEMS];
private static File OrderDetailsFile = new File("CustOrdDetails.ser");
private static File OrdRecordNumStore = new File("OrdRecordNumStore.txt");
private static PrintWriter writeFile;
private static BufferedReader readFile;
private static ObjectOutputStream objOut;
private static ObjectInputStream objIn;
//Set format for date
SimpleDateFormat simpleDF = new SimpleDateFormat("dd MM yyyy");
//--<BEGINNING>--Declaring Interface Variables------------------------------------------//
private JPanel innertoppanel, innercenterpanel, innerbottompanel, innerrightpanel, innerleftpanel;
private JLabel CustIDLbl, CustOrderIDLbl, OrderedDateLbl, GrandTotLbl, ItemNumberLbl,UnitPriceLbl, QuantityReqLbl, TotPriceLbl;
private JTextField CustIDTxt, CustOrderIDTxt, OrderedDateTxt, GrandTotTxt, ItemNumberTxt, UnitPriceTxt, QuantityReqTxt, TotPriceTxt;
private JButton addrecordbtn, savebtn, externalprevbtn, externalnextbtn, internalprevbtn, internalnextbtn, gotorecordbtn, additemreqbtn;
//--<END>--Declaring Interface Variables------------------------------------------------//
public static void main(String[] args) {
final CustomerOrderDetails COD = new CustomerOrderDetails();
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
try {
UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
COD.createCustOrdDetailsScreen();
} catch (Exception eb) {
eb.printStackTrace();
//--<BEGINNING>--Creating CustomerOrderDetails Screen---------------------------------------//
public JFrame createCustOrdDetailsScreen() {
createDefaultFrame();
mainframe.setSize(800,500);
createContainerPanel();
containerpanel.add(createCustOrdDetailsTitle(), BorderLayout.NORTH);
containerpanel.add(createCustOrdDetailsMainPanel(), BorderLayout.CENTER);
//containerpanel.add(createCustOrdDetailsLeftNavButtons(), BorderLayout.WEST);
//containerpanel.add(createCustOrdDetailsRightNavButtons(), BorderLayout.EAST);
containerpanel.add(createCustOrdDetailsButtons(), BorderLayout.SOUTH);
mainframe.setContentPane(containerpanel);
mainframe.setLocationRelativeTo(null);
mainframe.setVisible(true);
//--<BEGINNING>--Checks to see whether CRecordNumberStore file exists-------------------------------//
if (OrdRecordNumStore.exists() == true) {
recFileExists = true;
}else {
recFileExists = false;
if (recFileExists == true) {
MaxRecord = readRecordNumber();
CurrentRecord = MaxRecord;
//readOrder();
//readInnerOrderRecord(CurrentRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
}else{
MaxRecord = 1;
writeRecordNumber(MaxRecord);
CustOrderIDTxt.setText(""+MaxRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
//--<END>--Checks to see whether CRecordNumberStore file exists--------------------------------------//
if(readOrder() != null){
orderDetails = (CustOrdObject[]) readOrder();
//CurrentRecord--;
//System.out.println("Current Rec Here"+CurrentRecord);
if(orderDetails[CurrentRecord] == null){
System.err.println("CustomerOrderObj 1 is null !!");
}else{
System.err.println("CustomerOrderObj 1 is not null !!");
if(orderDetails[CurrentRecord].getInnerCustOrdObj() == null){
System.err.println("InnerCustomerOrderObj is null !!");
}else{
System.err.println("InnerCustomerOrderObj is not null !!");
innerCustOrdObj = orderDetails[CurrentRecord].getInnerCustOrdObj();
MaxItems = orderDetails[CurrentRecord].getMaxItems();
if(CurrentRecord > 1 && CurrentRecord < MaxRecord){
externalnextbtn.setEnabled(true);
externalprevbtn.setEnabled(true);
if(CurrentRecord >= MaxRecord){
externalnextbtn.setEnabled(false);
getFieldText(CurrentRecord);
getInnerFieldText(MaxItems);
}else{
orderDetails[CurrentRecord] = new CustOrdObject();
currentItem = 1;
return mainframe;
//--<END>--Creating CustomerOrderDetails Screen---------------------------------------------//
public JPanel createCustOrdDetailsTitle(){
createTitlePanel();
titlepanel.setBackground(TxtfontColor);
label.setText("- Customer Order Details -");
labelpanel.setBackground(TxtfontColor);
label.setForeground(Color.white);
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor) ;
buttonpanel.add(createReturnToMainMenuButton());
titlepanel.add(labelpanel, BorderLayout.WEST);
titlepanel.add(buttonpanel, BorderLayout.EAST);
return titlepanel;
public JPanel createCustOrdDetailsMainPanel(){
createmainpanel();
mainpanel.setBackground(TxtfontColor);
mainpanel.setLayout(new BorderLayout());
mainpanel.setBorder(BorderFactory.createTitledBorder(""));
mainpanel.add(createInnerTopPanel(), BorderLayout.NORTH);
mainpanel.add(createInnerCenterPanel(), BorderLayout.CENTER);
mainpanel.add(createInnerBottomPanel(), BorderLayout.SOUTH);
mainpanel.add(createInnerRightPanel(), BorderLayout.EAST);
mainpanel.add(createInnerLeftPanel(), BorderLayout.WEST);
return mainpanel;
public JPanel createInnerTopPanel(){
innertoppanel = new JPanel(new GridBagLayout());
innertoppanel.setBackground(TxtfontColor);
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
CustIDLbl = new JLabel("Customer ID");
CustIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustIDLbl.setFont(font);
CustIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innertoppanel.add(CustIDLbl, GBC);
CustIDTxt = new JTextField(20);
CustIDTxt.setEditable(true);
GBC.gridx = 2;
GBC.gridy = 1;
innertoppanel.add(CustIDTxt, GBC);
GBC.gridx = 3;
GBC.gridy = 1;
innertoppanel.add(Box.createHorizontalStrut(220), GBC);
OrderedDateLbl = new JLabel("Order Date");
OrderedDateLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
OrderedDateLbl.setFont(font);
OrderedDateLbl.setForeground(LblfontColor);
GBC.gridx = 4;
GBC.gridy = 1;
innertoppanel.add(OrderedDateLbl, GBC);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt = new JTextField(simpleDF.format(todaydate), 20);
OrderedDateTxt.setHorizontalAlignment(JTextField.CENTER);
OrderedDateTxt.setEditable(false);
GBC.gridx = 5;
GBC.gridy = 1;
innertoppanel.add(OrderedDateTxt, GBC);
CustOrderIDLbl = new JLabel("Customer Order ID");
CustOrderIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustOrderIDLbl.setFont(font);
CustOrderIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDLbl, GBC);
CustOrderIDTxt = new JTextField(20);
//CustOrderIDTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDTxt, GBC);
return innertoppanel;
public JPanel createInnerCenterPanel(){
innercenterpanel = new JPanel(new GridBagLayout());
innercenterpanel.setBackground(TxtfontColor);
innercenterpanel.setBorder(BorderFactory.createLoweredBevelBorder());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
ItemNumberLbl = new JLabel("Item Number");
ItemNumberLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
ItemNumberLbl.setFont(font);
ItemNumberLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberLbl, GBC);
ItemNumberTxt = new JTextField(20);
GBC.gridx = 2;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberTxt, GBC);
UnitPriceLbl = new JLabel("Unit Price");
UnitPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
UnitPriceLbl.setFont(font);
UnitPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceLbl, GBC);
UnitPriceTxt = new JTextField(20);
//UnitPriceTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceTxt, GBC);
QuantityReqLbl = new JLabel("Quantity Required");
QuantityReqLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
QuantityReqLbl.setFont(font);
QuantityReqLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqLbl, GBC);
QuantityReqTxt = new JTextField(20);
//QuantityReqTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqTxt, GBC);
TotPriceLbl = new JLabel("Total Price");
TotPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
TotPriceLbl.setFont(font);
TotPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 4;
innercenterpanel.add(TotPriceLbl, GBC);
TotPriceTxt = new JTextField(20);
TotPriceTxt.setEditable(false);
TotPriceTxt.addFocusListener(new FocusAdapter(){
public void focusGained(FocusEvent evt){
TotPriceTxt.setText(""+Integer.parseInt(UnitPriceTxt.getText())*Integer.parseInt(QuantityReqTxt.getText()));
GBC.gridx = 2;
GBC.gridy = 4;
innercenterpanel.add(TotPriceTxt, GBC);
return innercenterpanel;
public JPanel createInnerBottomPanel(){
innerbottompanel = new JPanel(new FlowLayout(FlowLayout.RIGHT));
innerbottompanel.setBackground(TxtfontColor);
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
GrandTotLbl = new JLabel("Grand Total");
GrandTotLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
GrandTotLbl.setFont(font);
GrandTotLbl.setForeground(LblfontColor);
innerbottompanel.add(GrandTotLbl);
innerbottompanel.add(Box.createHorizontalStrut(30));
GrandTotTxt = new JTextField(20);
innerbottompanel.add(GrandTotTxt);
return innerbottompanel;
public JPanel createInnerRightPanel(){
innerrightpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerrightpanel.setBackground(TxtfontColor);
innerrightpanel.setLayout(new BoxLayout(navrightpanel, BoxLayout.Y_AXIS));
innerrightpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerrightpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalnextbtn = new JButton(createNextButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getInnerFieldText(currentItem);
internalprevbtn.setEnabled(true);
if(currentItem < MaxItems){
++currentItem;
orderDetails[CurrentRecord].getInnerCustOrdObj();
setInnerFieldText(currentItem);
System.out.println("Current Item" + currentItem);
if(currentItem == MaxItems){
internalnextbtn.setEnabled(false);
innerrightpanel.add(internalnextbtn, GBC);
return innerrightpanel;
public JPanel createInnerLeftPanel(){
innerleftpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerleftpanel.setBackground(TxtfontColor);
innerleftpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerleftpanel.setForeground(Color.BLACK);
innerleftpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalprevbtn = new JButton(createPreviousButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getInnerFieldText(currentItem);
internalnextbtn.setEnabled(true);
if(currentItem == 1){
internalprevbtn.setEnabled(false);
if(currentItem > 0){
--currentItem;
orderDetails[CurrentRecord].getInnerCustOrdObj();
setInnerFieldText(currentItem);
System.out.println("Current Item" + currentItem);
innerleftpanel.add(internalprevbtn, GBC);
return innerleftpanel;
public JPanel createCustOrdDetailsButtons(){
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor);
externalprevbtn = new JButton(createPreviousButtonIcon());
externalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalnextbtn.setEnabled(true);
if(CurrentRecord == 1){
externalprevbtn.setEnabled(false);
if(CurrentRecord > 0){
--CurrentRecord;
setFieldText(CurrentRecord);
System.out.println("Current Record " + CurrentRecord);//Checking RECORD_NUM
buttonpanel.add(externalprevbtn);
addrecordbtn = new JButton("Add Record", createAddButtonIcon());
addrecordbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
MaxRecord = readRecordNumber();
MaxRecord++;
CurrentRecord = MaxRecord;
orderDetails[CurrentRecord] = new CustOrdObject();
writeRecordNumber(MaxRecord);
MaxItems = 1;
innerCustOrdObj[MaxItems] = new InnerCustOrdObject();
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
CustIDTxt.setText("");
CustOrderIDTxt.setText(""+MaxRecord);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt.setText(""+simpleDF.format(todaydate));
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
GrandTotTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
externalnextbtn.setEnabled(false);
externalprevbtn.setEnabled(true);
System.out.println(MaxRecord);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(addrecordbtn);
savebtn = new JButton("Save Data", createSaveButtonIcon());
savebtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
setFieldText(CurrentRecord);
setInnerFieldText(MaxItems);
writeOrder();
writeRecordNumber(MaxRecord);
System.out.println(CurrentRecord);
System.out.println(MaxRecord);
buttonpanel.add(savebtn);
java.net.URL imageURL_AddRowIcon = CommonFeatures.class.getResource("Icons/edit_add.png");
ImageIcon AddRowIcon = new ImageIcon(imageURL_AddRowIcon);
additemreqbtn = new JButton("Add Item", AddRowIcon);
additemreqbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
//CurrentRecord = MaxRecord;
MaxItems++;
innerCustOrdObj[MaxItems] = new InnerCustOrdObject();
System.out.println("Max Items "+MaxItems);
currentItem = MaxItems;
orderDetails[CurrentRecord].setMaxItems(MaxItems);
///setInnerFieldText(currentItem);
internalnextbtn.setEnabled(false);
internalprevbtn.setEnabled(true);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(additemreqbtn);
externalnextbtn = new JButton(createNextButtonIcon());
externalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalprevbtn.setEnabled(true);
if(CurrentRecord < MaxRecord){
++CurrentRecord;
setFieldText(CurrentRecord);
System.out.println(CurrentRecord);//Checking RECORD_NUM
if(CurrentRecord == MaxRecord){
externalnextbtn.setEnabled(false);
buttonpanel.add(externalnextbtn);
gotorecordbtn = new JButton("Go To Record", createGotoButtonIcon());
gotorecordbtn.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent evt){
* The text from the GotorecordTxt textfield will be taken and assigned
* to a temporary integer variable called Find.
int Find = Integer.parseInt(CustOrderIDTxt.getText());
for(int j=1; j <= MaxRecord; j++){
* Using a for loop, each record can be read using the readCustRecord
* method.
getFieldText(j);
* An if condition is utilized to check whether the temporary stored variable, Find,
* matches a field in a record. If this record is found, then using the RecordExists
* which was declared at the top, either a true or false statement can be assigned
* If the record exists, then a true statement will be assigned, if not a false
* statement will be assigned.
if(orderDetails[j].getCustOrderID() == Find){
RecordExists = true;
break;
}else{
RecordExists = false;
if(RecordExists == false){
* If the RecordExists is assigned a false statement, then a message will be
* displayed to show that the record does not exist.
JOptionPane.showMessageDialog(null, "Record Does Not Exist!", "Error Message", JOptionPane.ERROR_MESSAGE, createErrorIcon());
}else{
getFieldText(Find);
buttonpanel.add(gotorecordbtn);
return buttonpanel;
//TODO
public void setFieldText(int orderID){//TODO
orderDetails[orderID].setCustID(Integer.parseInt(CustIDTxt.getText()));
orderDetails[orderID].setCustOrderID(Integer.parseInt(CustOrderIDTxt.getText()));
orderDetails[orderID].setOrderDate(OrderedDateTxt.getText());
orderDetails[orderID].setInnerCustOrdObj(innerCustOrdObj);
orderDetails[orderID].setMaxItems(MaxItems);
setInnerFieldText(currentItem);
orderDetails[orderID].setGrandTotal(Float.parseFloat(GrandTotTxt.getText()));
public void setInnerFieldText(int currentItem){//TODO
innerCustOrdObj[currentItem] = new InnerCustOrdObject();
innerCustOrdObj[currentItem].setMaxItems(MaxItems);
innerCustOrdObj[currentItem].setItemNumber(Integer.parseInt(ItemNumberTxt.getText()));
innerCustOrdObj[currentItem].setUnitPrice(Float.parseFloat(UnitPriceTxt.getText()));
innerCustOrdObj[currentItem].setQuantityRequired(Integer.parseInt(QuantityReqTxt.getText()));
innerCustOrdObj[currentItem].setTotalPrice(Float.parseFloat(TotPriceTxt.getText()));
public void getFieldText(int orderID){
CustIDTxt.setText(Integer.toString(orderDetails[orderID].getCustID()));
CustOrderIDTxt.setText(Integer.toString(orderDetails[orderID].getCustOrderID()));
OrderedDateTxt.setText(""+orderDetails[orderID].getOrderDate());
currentItem = orderDetails[orderID].getMaxItems();
orderDetails[orderID].getInnerCustOrdObj();
System.err.println("currentItem" + currentItem);
//getInnerFieldText(currentItem);
GrandTotTxt.setText(Float.toString(orderDetails[orderID].getGrandTotal()));
public void getInnerFieldText(int currentItem){
ItemNumberTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getItemNumber()));
UnitPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getUnitPrice()));
QuantityReqTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getQuantityRequired()));
TotPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getTotalPrice()));
public void writeOrder(){//TODO
try {
objOut = new ObjectOutputStream(new FileOutputStream(OrderDetailsFile));
objOut.writeObject(orderDetails);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
} catch (IOException e) {
e.printStackTrace();
public Object readOrder(){
Object temporaryObj;
try{
objIn = new ObjectInputStream(new FileInputStream(OrderDetailsFile));
temporaryObj = objIn.readObject();
CustOrdObject[] blah = (CustOrdObject[]) temporaryObj;
/* System.out.println("Outer: "+blah[1].getCustID());
InnerCustOrdObject[] whee = blah[1].getInnerCustOrdObj();
System.out.println("Inner: "+whee[1].getItemNumber());*/
objIn.close();
System.out.println("Read Worky!");
return temporaryObj;
}catch(Exception e){
e.printStackTrace();
System.out.println("Read No Worky!");
return null;
public void writeRecordNumber(int MaxRecord){
try{
objOut = new ObjectOutputStream(new FileOutputStream(OrdRecordNumStore));
objOut.writeObject(MaxRecord);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
}catch(Exception e){e.printStackTrace();}
public int readRecordNumber() {
try {
objIn = new ObjectInputStream(new FileInputStream(OrdRecordNumStore));
int temporaryObj = Integer.parseInt(objIn.readObject().toString());
objIn.close();
System.out.println("Read Number Worky!");
return temporaryObj;
} catch (Exception e) {
e.printStackTrace();
System.out.println("Read Number No Worky!");
return -1;
}Message was edited by:
Kilik07 -
Problem with youtube and other video websites
I have a problem with youtube and other video websites:
Everything is up to date (flash, FF, my plug ins..) but i keep getting freezes when the video loads. I can hear sound but i can only see the first frame of the video.
I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
I hope someone could help out, i've searched for answer on google before and tried everything i saw but it didn't helped.
grts,
agrashHmm, so that person had a conflicting plug in.
Problem is that whenever i enter firefoxes safe mode which disables every plug in, i still have the youtube freeze/crash -
problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions. -
Problem with Drag and drop in panel dashboard
Hi
I am having problem with drag and drop in panel dashboard.
I will explain what i am doing.
I am using Oracle three column template in First region i am having a table that showing all customer.
I drag one record from my table and drop it on customer info (CIF) page on second region it is working fine.
my CIF page has a dashboard with 6 panel box. i am showing 6 different jsff in 6 panel box.
I put drop target in each jsff
<af:dropTarget dropListener="#{backingBeanScope.backing_customerinformation.handleItemDrop}"
actions="COPY">
<af:dataFlavor flavorClass="org.apache.myfaces.trinidad.model.RowKeySet"
discriminant="CustomerSearchDnD"/>
</af:dropTarget>
when i put drop target my panel boxes moves only when i drag it to another panel box header not entire part of panel box.
if i remove the drop target then panel box move normally as the example given on: [http://adfui.us.oracle.com:7778/faces-trunk/faces/visualDesigns/dashboard.jspx?_afrLoop=2021391022520156&_afrWindowMode=0&_afrWindowId=null] but in taht case i am not able to drag and drop my dataYou must be an Oracle employee as you're referring to a component in the upcoming JDeveloper version which has yet been released to the general public. Oracle employee's are, I believe, directed to post on internal Oracle forums.
CM. -
Problem with sqlldr and commit
Hi,
i have a problem with sqlldr and commit.
I have a simple table with one colum [ col_id number(6) not null ]. The column "col_id" is primary key in the table. I have one file with 100.000 records ( number from 0 to 99.999 ).
I want load the file in the table with sqlldr ( sql*loader ) but i want commit only if all records are loaded. If one record is discarded i want discarded all record of file.
The proble is that in coventional path the commit is on 64 row but if i want the same records of file isn't possible and in direct path sqlldr disable primary key :(
There are a solutions?
Thanks
I'm for the bad EnglishThis is my table:
DROP TABLE TEST_SQLLOADER;
CREATE TABLE TEST_SQLLOADER
( COL_ID NUMBER NOT NULL,
CONSTRAINT TEST_SQLLOADER_PK PRIMARY KEY (COL_ID)
This is my ctlfile ( test_sql_loader.ctl )
OPTIONS
DIRECT=false
,DISCARDMAX=1
,ERRORS=0
,ROWS=100000
load data
infile './test_sql_loader.csv'
append
into table TEST_SQLLOADER
fields terminated by "," optionally enclosed by '"'
( col_id )
test_sql_loader.csv
0
1
2
3
99999
i run sqlloader
sqlldr xxx/yyy@orcl control=test_sql_loader.ctl log=test_sql_loader.log
output on the screen
Commit point reached - logical record count 92256
Commit point reached - logical record count 93248
Commit point reached - logical record count 94240
Commit point reached - logical record count 95232
Commit point reached - logical record count 96224
Commit point reached - logical record count 97216
Commit point reached - logical record count 98208
Commit point reached - logical record count 99200
Commit point reached - logical record count 100000
Logfile
SQL*Loader: Release 11.2.0.1.0 - Production on Sat Oct 3 14:50:17 2009
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Control File: test_sql_loader.ctl
Data File: ./test_sql_loader.csv
Bad File: test_sql_loader.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 0
Bind array: 100000 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table TEST_SQLLOADER, loaded from every logical record.
Insert option in effect for this table: APPEND
Column Name Position Len Term Encl Datatype
COL_ID FIRST * , O(") CHARACTER
value used for ROWS parameter changed from 100000 to 992
Table TEST_SQLLOADER:
100000 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 255936 bytes(992 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 100000
Total logical records rejected: 0
Total logical records discarded: 0
Run began on Sat Oct 03 14:50:17 2009
Run ended on Sat Oct 03 14:50:18 2009
Elapsed time was: 00:00:01.09
CPU time was: 00:00:00.06
The commit is on 992 row
if i have error on 993 record i have commit on first 992 row :(
Edited by: inter1908 on 3-ott-2009 15.00
Maybe you are looking for
-
I cannot download updates to Photoshop Elements 9. I get an error message that my serial number is not recognized or eligible. Can you help with this?
-
Export parameter in Message mapping UDF
Hi, I use PI7.1. I defined an Export parameter in Message mapping "Signature" tab. And as http://help.sap.com/saphelp_nwpi71/helpdata/en/43/c3e1fa6c31599ee10000000a1553f6/frameset.htm, I wrote in my UDF as follows: public String myudf(int var1) { Str
-
ITunes wont detect iPhone - Urgent help!!!!!
Ok heres the deal. Usualy i use iTunes regulary without any problems. But 2 days ago all of a sudden my iTunes wasn able to detect the Iphone, i tried everything, differrent USB plugin, reinstalling iTunes, reinstalling Bonjour but nothing changed. N
-
Why iWS is looking for windows files on Solaris?
I have iWS 6.0 SP4 running as the web server and application server on Solaris 8 env. I am getting the following error messages in iWS error log. The application is working fine and does NOT reference any of the following files, any idea what goes wr
-
Reset Apple Push Notification Certificate
I revoked my APN cert online @ https://identity.apple.com/pweb to try and clear out some configuration issues on my server. Now I need to create a new APN. Unfortunately in Server.app the old cert is still showing and I only get the option to "renew"