Problem with recovery mode detection

Anyone help?
Am using my 80g ipod classic on both home and work laptop (both running vista). Every time I plug into my home PC, no problem. Yet, every time I connect to my work machine I get the following message;
'Itunes has detected and Ipod in recovery mode. You will need to reset before continuing'
Or words to that affect. I have uninstalled and reinstalled itunes and this does solve the problem, but frankly it's a pain in the neck having to do that every time I'm in the office.
Suggestions?

Maybe a change of drive letter on your work PC will do the trick.
http://docs.info.apple.com/article.html?artnum=304503

Similar Messages

Problem with recovery mode.

I'm not new to this sort of thing and I know how to solve most problems but here is where I have a problem:
So I got back from vacation today, and while in Jersey, I was killing myself over the fact that the 2.0 update was out. So I get back and try to update it, but when the update got to the part where it had to restore the iPod, I got the error message (-6). So now my iPod is stuck in recovery mode, and I know, to get it out of recovery mode, you just simply restore it on your not mentally ******** computer. So I go to restore it, but all it does is give me the same error message.
I don't know what to do, but after I am done writing this message, I plan on using MSCONIG to see if that works.
Anything, ANYTHING, will help.
-Thanks

i had the same problem but you have to creat a new user account under control panel and open up and reinstall itunes in the new Account. afterwards just restore it and it will be restored.my only problem is it wont let me ***** use the new software that ive already purchased

Problem with recovery mode and restore for disabled ipad2

Hello, I hope you can help me.
My ipad2 is disabled. My only option is to enter recovery mode and then restore.
I followed the instructions to connect to my ipad to my computer. I saw the appropriate restore graphic on my ipad. Yet iTunes on my computer does not recognize my ipad in recovery mode. Instead iTunes said it could not access my device because it was disabled. I have the lastest version of iTunes on my computer. I believe I have iOS 7 on my ipad.
I am unable to restore my ipad.
Any suggestions?
Thank you!

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
iPad Stuck in Recovery Mode after Update
http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
 Cheers, Tom

Having problems with recovery mode and syncing my phone.

Trying to recover my i-phone. Phone is useless until I do. It states that I need to back-up. Not allowed to do that. Help!!!

Let's get your phone to work as intended Cabowabo63! Please start it in safe mode as per this link http://bit.ly/NnpVJG Then power off/on normally. Keep us posted.
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

Problem with Append mode in File Receiver

Hello,
I am facing some problem with Append Mode in File Receiver.
In channel config, i have given :
Construction Mode : Append
File Type : Text
Message Protocol : File Content Conversion
The size of the file which i am trying to send is about 9.5MB.
I got this error,
"Recovering from loss of connection to database; message
loaded into queue by recover job: System Job (Failover Recovery)".
So, it would seem that there was a loss of connnection to the database
while the file was being written.
Note - XI successfully recovered from the connection loss and
successfully wrote the file, however since the communication channel
was set to append, it appended to the partial file that was written
before the database connection loss. This is not correct. The file
should have been overwritten after the recovery even though the communication
channel was configured to append.
Can anyone help me on this regard.
Thanks,
Soorya.

Hi Venkat,
I would suggest u to split the file in to chunks if u face any problem in processing at a time in append mode and also
Memory Requirements are must 4 processing huge files:
Q: Which memory requirements does the File Adapter have? Is there a restriction on the maximum file size it can process?
A: The maximum file size that can be processed by the File Adapter depends on a number of factors:
o The most important one is the size of the Java heap, which is shared among all messages processed at a certain point in time. In order to be able to process larger messages without an out of memory error (OOM), it is recommended to increase the size of the available Java heap and/or to reduce the concurrency in the system so that fewer messages are processed in parallel.
o Another factor negatively influencing the maximum message size in releases up to and including XI 3.0 SP 13 is an enabled charcter set (encoding) conversion if the message type is set to "Text".
o Using the transport protocol "File Transfer Protocol (FTP)" also uses more memory for processing than the transport protocol "File System (NFS)" (up to and including XI 3.0 SP 13).
o If the Message Protocol "File Content Conversion" is used in a File Sender channel, consider that not only the size of the input file affects the File Adapter's memory usage, but even more the size of the XML resulting from the conversion, which is usually a few factors larger than the original plain text file.
To reduce the memory consumption in this scenario, consider configuring the setting "Maximum Recordsets per Message" for the sender channel. This will cause the input file to be split into multiple smaller mesages.
Plz do refer the following links:
U may plan the availability of ur communication channel using "Planning Availability Times" feature
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
/people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
hi check the below links for reference
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10748ef7-b2f0-2910-7cb8-c81e7f284af5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7086f109-aaa7-2a10-0cb5-f69bd2affd2b
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cc1ec146-0a01-0010-90a9-b1df1d2f346f
Regards,
Vinod.

Problem with Fullscreen mode

Hello. I have problem with Fullscreen mode in Pages 09. Let me explain it. I launch Pages 09 on space nr 4, than i activate fullscreen mode and now when fullscreen is active i switch for example to space nr 2. And what happens? Pages also moves to space nr 2, but i don't want to move my pages to space nr 2. I guess it is a bug in Pages 09. Thank you for your advice.

Hi There
By the sounds of this behaviour you haven't set any space options for Pages within System Preferences (Expose and Spaces Pane). After experimenting with different options this is what I experience:
1. Pages not listed in application assignment in spaces Preferences - Enter full screen in pages, switch from one space to another pages window will follow and exit fullscreen (this sounds like what you are experiencing).
2. Pages set to every space in app assignment - Enter full screen in pages, switch from one space to another and pages will follow but wont exit full screen.
3. Pages set to a single space in app assignment - Enter full screen in pages, switch from one space to another using control and arrow keys pages will pull me back into the space it is set to and will exit fullscreen. Using the control and number keys pages will stay in its set space but upon returning to that space pages had exited fullscreen.
I suggest you add pages to the the spaces application assignment in System Preferences by clicking the plus arrow under the list of apps and select a specific space for pages to open in, once open Pages will only move from this space if you move it manually.
You can send your feedback to Apple via http://www.apple.com/feedback/pages.html if you wish
Hope this helps
J.C

Problem with passive mode FTP server and NAT

Hi,
I have a problem with Passive mode FTP and NAT.
I am trying to run both an FTP server and sharing the Internet connection via NAT. I have by the way specified the passive ports to use in ftpaccess (65000-65534). Everything works fine until someone tries to connect via Passive mode. I have tracked the problem down to the firewall and the rule that handles NAT.
Firewall rule config without NAT:
00001 allow udp from any 626 to any dst-port 626
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
Firewall rule config with NAT
00001 allow udp from any 626 to any dst-port 626
00010 divert 8668 ip from any to any via en1
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
So, passive ports do not work when NAT is on. If I turn it off, Passive ftp works like a charm.
But how do I solve my problem? I have in my quest for the answer stumbled upon "-punch_fw" but do not know how to use it or if it even helps me at all?
Best regards,
Peter
B&W G3 Mac OS X (10.4.5)

Media/Lacrosse-1-tiny.3gp
I can't find the file on your server.
They may also need to edit the .htaccess file to allow the .3gp file extension be used. Call them.

I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

If you didn't back it up, your data is gone. There is no "solution" after the fact.

HT2020 if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

Log a bug with Apple, with whatever details you can provide. In the interrim, consider acquiring a router; either a repurposed x86 box running open-source networking or gateway software, or a commercial device.

MY I PHON 16GB TRYED TO TO RESET BUT I AM GETTING ERROR 1015, WITH RECOVERY MODE with itune sign, what should i do??

MY I PHON 16GB TRYED TO TO RESET BUT I AM GETTING ERROR 1015, WITH RECOVERY MODE with itune sign, what should i do??

Not much you can do. Your phone is most likely permanently "bricked" Error 1015 occurs when trying to restore a previously jailbroken phone. This usually leaves the phone in a state where it can not be recovered as you are experiencing.
Discussion of jailbroken phones is prohibited by the Terms of Use of this forum. You'll have to get help elsewhere. Ask the lovely people who helped you jailbreak your phone.

Trouble with recovery mode.

I have a similar problem to Apom12...
I unplugged my phone in the middle of an update, and it was fine until I plugged it back in. Now, when I push the sleep button, the only thing the phone will do is show a plug with an arrow pointing up to an itunes icon. It wont make/receive calls or show the home screen or anything. When I plugged it into my computer,a message box popped up that said, 'Windows needs to install driver software for your Apple Mobile Device (Recovery Mode)'. Since I didn't have a cd that had the software on it...I looked on the internet for it and could find nothing.
So, the next day I took my phone and my computer to the AT&T store, and since they don't know what they're doing, they had me call the apple helpline. The person I talked to told me to uninstall itunes, and she took me step by step through the process. She told me also that I needed to re-activate my iphone...However, there wasn't internet in the AT&T store, so I had to hang up with her before I could complete the re-installation of itunes.
I just now re-installed itunes, and it works fine, but when I plug my phone into my computer, it still has the same icon with the itunes and the plug. However, the message to install software has changed...it now says, 'Windows needs to install driver software for your Apple Recover (iBoot) USB Driver'
So, I've read several different forums about the recovery mode and how I can get the phone out of it, but pushing the buttons and holding them hasn't helped. The phone is pretty much frozen. I don't know what this (iBoot) business is all about, but apparently, if I plug my phone into a Mac computer then it will be easier to restore it? I don't know anyone with a Mac computer, and it looks like I'll have to drive two hours to get to an Apple store.
Can anyone help me locate the correct software (iBoot) to get my phone working again, or at least give some advice on what I could do next to try and fix my phone?

Hello, Sorry to see your having this issue today.
One bit of advice I would like to offer really quick is. We do not want to disconnect iPhone while it is in the middle of updating. You want to allow it to finish till it says iPhone Activated on the screen and iTunes has stopped informing you of the updated progress. You even want to keep it plugged in when it says iPhone is rebooting.
Now as far as the iBoot software goes. This is typically a special state the iPhone goes into and installed Recovery Mode Drivers. Once the Drivers are installed properly, If you launch iTunes it should say "iTunes has detected an iPhone in recovery mode and needs to restore" At this point you will press the Restore button in iTunes, And agree to any Prompts and sit back and wait till it is finished.
You may get a screen in iTunes that later pops up saying "Setup as New iPhone or Restore from backup" Choose Restore from backup and again sit back and wait and it will soon restore iPhone to that backup file.
Depending on the machine the entire process could take 10 to 20 min. If you have any concerns about the process as if it is finished or questions about the messages feel free to call 1-800-My-iPhone and they will be happy to assist you with the process.
And yes your more then welcome to restore on another PC or even a Mac.
Let us know how this goes for you. Post back if needed

Zen Vision:M Problem (Firmware + Recovery Mode) (please un-sti

(apologies on the sticky, i misclicked!)
I've had my Zen Vision:M 30GB for over a year now, and I absolutely love it! Unfortunately, while on my New Years vacation this past week I accidentally dropped it after it tangled in my headphones. Immediately afterwards, I started getting the "recovery mode" problem that seems to crop up. Unable to get past this(it booted only once every million-or-so tries), I decided to use the "MP3 recovery tool" from Creative's site
Unfortunately, it froze up halfway through, and now is giving me a "Hard Disk error". I tried to reformat, and it seemed to wipe it clean...but now it wont even recognize it when I plug it into my USB port to put in new firmware! (The PC recognizes it, but not the Firmware installation)
I don't know what else I can do....any ideas/help, please?
(I looked at Creative's support pages, but they only deal with Warranty repairs, which I don't have as it was a gift.) Can they repair/replace a broken non-warranty player, and if so, for how much?
Or is there another solution I haven't tried yet?
Any help would be GREATLY appreciated!
Thanks in advance!Message Edited by leova on 0-02-200805:06 PM
Message Edited by leova on 0-02-200805:08 PM

Customer Support can also arrange out of warranty repairs, and can advise on the price.
Cat

Problem with sleep mode in Win 7

Hello Friends,
I have a great problem after Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it should automatically go to the sleep mode. Unfortunately, only the screen is black and the laptop is still running, I have to shut it down then switch on again. Is it a problem with the 'battery driver'?Please, help me :)

Before you continue to wait for solution and waste your time back-up all your important data and reinstall OS again using HDD recovery installation - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
After doing this you will have clean preinstalled and well working OS again.
The first thing you should do after OS installation is to disable automatic Windows update. Do it manually and install important updates only.

Satellite L505D - Problem with sleep mode in Win 7

It's me again, in last thread :
"Hello Friends,
I have a great problem after Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it should automatically go to the sleep mode. Unfortunately, only the screen is black and the laptop is still running, I have to shut it down then switch on again. Is it a problem with the 'battery driver'?Please, help me :)"
The sleep mode worked perfeclty for couple of days and it is again gone.. What is more when I try to enter the sleep mode I can't do anything on the notebook , it is still running on blank screen and the processors' fan is working on high speed. During these last days, when the sleep mode worked, windows didn't update itself..
I don't know what is happening.. :) Weird problem, isn't it?

It is not easy to say why this happen. In your last posting you wrote about some windows updates. Who knows what is wrong there.
If nothing helps, not even system restore and you want to use stand-by mode I recommend you to back-up all your data and install OS again using recovery mode.
With factory settings everything will be OK again but then be careful with updates.

HT4623 How to re download iOS 7 for my iphone 5c, I think my back and system restore has a virus, I want a new version to download, I know it has something to do with recovery mode.

I did a restore from back, a restore to new phone and a recovery mode restore, now I want to download the iOS 7.0.4 again, I called apple and they wont walk me through this to re download it, they did a few month back when I was working on my bother phone, his battery kept going dead and after the download it was all good, now my battery is dying much faster and I would like to have a new slate of the OS re downloaded, how do I do this, I know it has something to do the recovery mode.

All you have to do is restore the device to factory settings. Once the device is in recovery mode, and connected to itunes via USB Itunes will show a message" iTunes has detected a device in recovery mode, click ok to restore now" Then click ok and it will restore the phone to factory settings, with a fresh copy of iOS7.0.4. Just make sure your iTunes is up to date before trying to restore.

Problem with recovery mode detection

Similar Messages

Maybe you are looking for