Problem with Recurring Tasks

Hi people,
After I upgraded my curve 8900 to 5.0 anything (tried two so far) .461 & .411 I noticed that my tasks from Outlook that are recurring when  I mark them completed the next occurance has a strange reminder time.
i.e.
I have a recurring task Morning Vitamins set to be reminded daily at 8:00 AM. When I complete the task in version 4 the next task was created no problems. However, with version 5 when I complete the task, the next task has a reminder time of 1:00 AM sometimes 2:00 AM. I can't figure out the rhyme or reason of this.
I have tried several battery pulls no change still same wierd reminder time.
Has anyone else noticed this? Anyone have any ideas to fix this?

Hello Robin, and thanks for the answer.
The QA team is testing with a special account created to this purpose. We the development team are viewing these tasks wuth that account without a problem, that's the odd thing. We've checked the IE version, the security configuration of IE and everything matches. The problem began when we changed from VC to WebDynpro.
Regards

Similar Messages

  • Problem with complete task via email

    Hello,
    I have problem with complete task via email. I found this blog very useful (http://blogs.adobe.com/ADEP/2010/11/how-to-complete-a-task-via-email-using-reply-to-comple te.html), but...
    I set up everything as it’s written in blog mentioned above. When a task is assigned to me, I received an email notification with actions (accept, deny). After that I replied with action “accept”. Then I received email with subject “Errors from LiveCycle ES”:
    LiveCycle ES has tried to process your request and encountered the following error:
    com.adobe.pof.POFRuntimeException: Transaction is not active: tx=TransactionImple ; – nested throwable: (javax.resource.ResourceException: Transaction is not active: tx=TransactionImple )
    This response to your original email
    Subject:RE:Task Assignment – Process: Test/Email_Test. Task 76 has been assigned to you.
    Date Sent:Thursday, October 24, 2011 1:17 PM
    Body:accept
    DO-NOT-DELETE: MTMhMzE0ITMyOA==!
    Attachments:
    In log appeared this following error:
    Caused by: ALC-DSC-215-000: com.adobe.idp.dsc.DSCRuntimeException: None of the Auth Provider could authenticate the user. Authentication Failed
    at com.adobe.livecycle.notification.TaskNotificationServiceImpl.processEmailComplete(TaskNot ificationServiceImpl.java:1157)
    Can you me please? I have no idea what to do to succesfully complete task via email endpoint. Thanks
    Jan Petrla

    Hi Diana, thanks for your reply.
    You're probably right about 2 different error messages.
    To the 1st one: I'm sure that status task is Assigned (to me). I received an email and I also reply on that email.
    To error log: I found out that error log appears when I enable email endpoint on Complete Task service. But I managed to solve this problem. I set wrong user. Now I have here the same user as is written in login-config.xml so log seems to be ok.
    So I created new task and tried to complete it via email. Now I receive email with another error:
    LiveCycle ES has tried to process your request and encountered the following error:
    com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error getting user context
    This response to your original email
    Subject:RE:Task Assignment - Process: WorkFlowClient/Test. Task 92 has been assigned to you.
    Date Sent:Thursday, October 27, 2011 3:05 PM
    Body:Complete
    DO-NOT-DELETE: MTIxMSExNjAzITIwMTE=!
    Attachments:
    And to the last point: email endpoint is set up with TestPOP3@mydomain and user receiving email has jpetrla@mydomain. I use Lotus Notes as email client, I tried another account with gmail, but the result was same.
    Now I really don't know to do...
    Jan

  • Problem with remove task from schedule in PWA

    In our environment problem with remove task from schedule by PWA.
    Problem is only when I want to remove few task in the same time, but the operation one by one is correct.
    In my opinion problem is with calculation schedule after remove tasks, column ID include wrong value it means that Number ID does not generate in the correct order same of numer
    disappear. Click Calculate button on ribbon causes problem with finshed operation and save project.
    Problem occurs only machine with IE 11.0 browser without compability mode, on other machine for example on the same project with IE 8,9,10 everything is correct.
    Problem appeared recently, earlier everything was OK.
    Txn, Dariusz Moczyński

    Hi Darius,
    I'm a bit confused. You are now talking about 2 issues.
    For the first one, you cannot edit anymore tasks in PWA, with any browser versions? Is it happenonog for any users on any projects? Try the following solutions publish the project from Project Pro and see if it helps. Press CTRL F5 to delete IE cache. Ensure
    that your PWA URL is added to the trusted site and/or compatibility sites. Check for the ULS logs or javascript errors.
    For the second issue, please refer to my previous reply, this obviously cannot be considered as a bug since it is happening with a non supported browser version and working properly on supported versions of IE.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Resources not levelling with recurring tasks

    Hi everyone,
    I have a problem with a project I have made for an assignment (not real life). I have entered all my tasks and assigned resources to them, there are about 60 tasks and half a dozen resources. At this stage, on the resources, none of my resources are over
    allocated.
    Then I add a recurring meeting every monday (allowing for allocated non-working days) for one hour. This then causes all of my resources to be over allocated.
    To resolve this, I have tried levelling the resources, allowing for the priority of the recurring task, so that the other tasks will be split around the meeting. This works for one or two of my resources, but not for all of them. The length of the project
    is not too important at this stage, so I have allowed it to extend to accomodate the split tasks.
    I've tried manually reassigning the resources, and I can get a couple of them allocated properly, but then I adjust something else and it throws all of the resources out of whack again!
    I am almost at my wit's end with this! If you have any suggestions, I would be really grateful!
    Cheers,
    Steve

    Hi Steve,
    I’m not sure you’re going to be able to do what you want as Project does not like you assigning resources to summary tasks like this. 
    When I had a look in the help file it says.
    “If you assign resources to a recurring summary task by typing resource names in the
    Resource Names field, the resource will be assigned to the total work on the recurring task and not to the individual recurring tasks as they occur.”
    Which is why I think you will be unable to resolve the conflicts.
    If you must have a meeting every week and want to assign resources, I guess you may have to set them up individually. 
    (Or maybe list the attendees under Contacts, which is what Project suggests but that does not sound ideal to me)
    Sorry can’t help further.
    Cheers,
    Tom.

  • Problem with clientgen task in weblogic 9.0

    hi,
    While developing webservices for our project, we used the clientgen ant task for generating the artifacts on the client side. I'm getting trouble in returning a collection of objects (list, vector) from the server to the client. When i try to do so, the clientgen task tries to create a java.util package on the client side in which it creates a List class which basically contains an object array with getter-setter. What i want is for the sun java collections classes to be used instead. The above problem applies to both user-defined as well as built-in objects i.e. say a list of objects of type T or a list of Strings. If someone, has any pointers regarding the same plz help...
    tia,
    cyril

              Try limiting the length of the session id.
              This is in either the weblogic.xml/web.xml
              files. You can get the dtd in the 6.0 doc.
              "Thierry Cools" <[email protected]> wrote:
              >Hi I have a problem with the session id that is generated in tha address bar
              >of my brower
              >When I start my application the following link appears
              >
              >http://127.0.0.1:7001/ebpp_beans/enterLogonInformation.do;jsessionid=Olw9VMc
              >0I1Z52YMgycyD23c8L4Ch2FurHLwbV2WhZw731dR3mBtJ|8186718416288373359/-140823374
              >1/7001/7002
              >
              >It seems that Weblogic 6.0 generates '/' characters in the session id.
              >This has for consequences that the servlet engine is taking the session id
              >in its context path, so that none of my links are working anymore.
              >
              >Could someone give me a clue to solve this problem
              >Thanks,
              >Thierry
              >
              >--
              >
              >Thierry Cools
              >
              >Senior Java Developer
              >S1 Brussels
              >Kleine Kloosterstraat, 23
              >1932 st. Stevens-Woluwe
              >Belgium
              >Tel : +32 2 200 43 82
              >Email : [email protected]
              >
              >
              >
              

  • Problem with user task

    Hello all,
    we're working with Oracle BPEL Process Manager 10.1.2 (JBoss 3.2.6) on Windows XP (jdk 1.4.2_03).
    I've successfully run many examples provided with this distribution (e.g LoanFlowPlus demo).
    However when we try to build a BPEL process with user tasks defined, we are able to launch task, but when we complete such tasks nothing happens, and onTaskResult method is never called.
    This is the code we use to complete a task (Task are completed from web pages):
    String _taskId = request.getParameter("TaskId");
    IWorklistService worklist = (IWorklistService)          locator.lookupService(IWorklistService.SERVICENAME);
    ITask task = worklist.lookupTask(_taskId);
    // getResponse returns a String
    _task.setConclusion(getResponse());
    // getAttachment returns a XML Document                         
    _task.setAttachment(getAttachment());
    worklist.completeTask(task);
    After these sentences are performed such task is not returned when _worklist.listTasksByAssignee("[email protected]") is performed, but onTaskResult is never called. No error messages are shown.
    Any idea?
    Thanks.
    Javi

    I've found a possible cause for this weird problem.
    It only happens when completeTask is called and somebody has the flow view page on the BPEL Console open.
    If nobody is browsing through the BPELConsole web environment task are completed successfully...
    ¿?

  • Problems with Assign Task operation

    I'm having a problem with the Assign Task operation. When I export an application of the LiveCycle ES2 environment and import into another environment LiveCycle ES2, my process get stalled in the all Assign Task operations, and the only way to solve the problem I found is to redo all the Assign Task operations. But in an application with many Assign Task operations, this solution becomes very complicated.
    Anyone who has encountered this problem could help me better to fix it?
    Thanks for any help!
    Following is the error message:
    StackTrace:
    java.lang.NullPointerException
    at com.adobe.idp.taskmanager.dsc.util.UserManagerUtils.getUserOID(UserManagerUtils.java:959)
    at com.adobe.idp.taskmanager.dsc.userservicev2.UserServiceImpl.createTaskFromDialogPropertie s(UserServiceImpl.java:941)
    at com.adobe.idp.taskmanager.dsc.userservicev2.UserServiceImpl.createLongLivedTask(UserServi ceImpl.java:1631)
    at com.adobe.idp.taskmanager.dsc.userservicev2.UserServiceImpl.createLongLivedTask(UserServi ceImpl.java:1506)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
    at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept(DocumentPassi vationInterceptor.java:53)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:357)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapterBean.java:227)
    at sun.reflect.GeneratedMethodAccessor643.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
    at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:237)
    at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:158)
    at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:169)
    at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
    at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:378)
    at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
    at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
    at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
    at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:138)
    at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
    at org.jboss.ejb.Container.invoke(Container.java:960)
    at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
    at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
    at $Proxy378.doSupports(Unknown Source)
    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
    at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:165)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)
    at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)
    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:93)
    at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:22 5)
    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:66)
    at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
    at com.adobe.idp.jobmanager.execution.workadapter.AbstractExecutableJob.invokeRequest(Abstra ctExecutableJob.java:127)
    at com.adobe.idp.jobmanager.execution.workadapter.PersistentExecutableJob.execute(Persistent ExecutableJob.java:60)
    at com.adobe.idp.dsc.workmanager.adapter.UnManagedAsynchronousWorkAdapter.run(UnManagedAsync hronousWorkAdapter.java:39)
    at org.jboss.resource.work.WorkWrapper.execute(WorkWrapper.java:204)
    at org.jboss.util.threadpool.BasicTaskWrapper.run(BasicTaskWrapper.java:275)
    at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:743)
    at java.lang.Thread.run(Thread.java:619)

    Hi javier,
    1. record = <DATOS>
    If possible, try to use
    a pre-defined strucure of type P9069
    for putting data into this infotype.
    2. Avoid using field symbols.
    3. Try with P9069
    regards,
    amit m.

  • Problem with Human Task(hw_services)

    Hi,
    We are facing a problem using the Human Task in a BPEL process.
    When we add a human task and for any BPEL process in Jdeveloper and tried to add a new user to it no Realm is getting selected.
    And when we try to lookup for users getting an error message
    ' Identity Service Client Error
    BPMIdentityService has client error
    Contact oracle support if error is not fixable'
    We're using the default settings for security on dev server.
    Our SOA suite configured on HP-UX machine and using Oracle XE DB which is on Windows XP machine.
    This is working fine with other configurations working on Windows machines.
    And other interesting thing we found is,When we open the em console we didn't find any webservices unders 'hw_services'
    ( IdentityConfigServicePort,IdentityServicePort IdentityService, TaskMetadataServicePort TaskMetadataService,TaskQueryServicePort TaskQueryService,TaskServicePort are not there)
    seems our hw_services are not configured properly. Everything else is working fine.
    Please help advice as it is very urgent...
    Thanks in advance...
    -Sri

    Hi Marc,
    Thank you very much for the reply.
    WorkList Application's URL mentioned in the wf_config.xml is working fine and we are getting the login page.
    But the SOAP endpoints mentioned in wf_client_config.xml for other webservices like Identity Services are not working. Getting HTTP 404 Not Found error message
    We didn't face any other problems with the config.
    Please help advice whether any other details are needed to solve this issue....
    Thanks again...
    -Sri

  • Ovi Suite/N97 Issues with recurring tasks

    Hi
    I have finally managed to get my N97 to work with Ovi Suite (v 2.0.1.35) but am having some very annoying issues when it comes to syncing calendar & tasks (personally I wish I could just sync the calendar and not the tasks...).
    I have several recurring tasks in Outlook. They feature in my task list on Outlook as just one task with the recurring symbol next to them.  Whenever I sync my N97 for some reason, on both the N97 and Outlook the recurring tasks disappear  and are replaced by a years worth of the recurring task.  This means that both my N97 & Outlook task lists are suddenly overflowing and impossible to manage.
    Has anyone else experienced this & is there a way round this, or a way to simply sync calendar and not tasks??
    Thanks
    Nick

    Just tried editing my previous post and forum wouldn't let me.
    Anyhow, I just discovered that Ovi suite didn't mark my tasks as complete - it deleted them.  It also deleted quite a large chunk of my completed tasks as well.  I have absolutely no idea why it would have done this, but to say it's very frustrating is a massive understatement, I'm now having to rebuild my task list from memory.
    Never had any of these issues with PC Suite....
    P.S - In my Ovi suite options I have conflict resolution set to Outlook not Device...

  • ICal 3.x .ics import - problem with recurring events and non-unique UIDs

    Upgraded to Leopard over the holiday break. Under Tiger's iCal (v2.x), .ics files exported from other calendar programs (Outlook via iAppoint/O2M in this case) and imported into iCal behaved 'normally'. However, in iCal 3.x in Leopard, for recurring appointments in the exported calendar, only the last appointment in the series shows up in iCal (although some meetings show up for about 0.25 seconds during the calendar import, then immediately disappear! This post by MalcolmS provided the critical clue - it seems that for recurring events, the .ics file has all of the events in the series with the same UID. Previous versions of iCal didn't care, but v3 apparently does - and deletes all earlier versions of the event, leaving only the last one with that UID. I confirmed that is the case by opening the .ics file in Word, which clearly showed all of the recurring events, and all the events in a series (e.g. a weekly meeting for the year) had the same UID. After the import to iCal, only the last one is in the calendar (in the above example, the one meeting of the series occurring in the last week of December). Manually editing the UIDs of a recurring series in the .ics file (to make them actually unique) allows them to all show up in iCal after import.
    Since many of the events in my Outlook calendar are accepted invites for recurring appointments, re-creating them as individual calendar events in Outlook is not a viable option. The frequency of changes to my calendar means I usually export it once per day (or twice); thus, manually editing the .ics files is also not a viable option.
    Any suggestions on workarounds for this problem? Alternatively, any other suggestions for getting the calendar data from Outlook into iCal?
    Thanks in advance!

    Moot point, as direct iPhone access to the Exchange server is now supported by our IT department.

  • Problem with Automated Tasks

    Hi all,
    At this moment I'm testing a cartridge deployed in OSM7 that is installed in Solaris Spark. The cartridge contains processes that include Automated Tasks with XQuery Sender Automator Internal to send a message to a queue JMS. In some of the Automated Task, when try to execute de XQuery Sender doesn't occur anything, the message is not putted in the queue and in the log doesn't appear any error.
    I created 3 orders in OSM, and checking all the WebLogic console I can see the next:
    1. In the worklist of OSM appear the 3 orders with column "State=Received" and doesn't have anything in the column "User", (I think this mean that the automator has not started).
    2. In the WebLogic console -> JMSModules -> "oms_jms_module" -> "oms_events" ->Monitoring, I can see 3 messages "Pending" that correspond to each order created.
    3. The Orchestration Plan "Seen in the osmwebui" is OK.
    Note1: When I test the same cartridge deployed in OSM7 installed in Windows I don't have the problem.
    Note2: This doesn't occur always, sometimes the JMS Message is putted in the queue and the flow of the order continues in the right way.
    Thanks a lot for any suggestion.
    Edited by: user2926753 on 17-nov-2011 9:24

    Ramiro;
    From what you are describing, it sounds as if the automation plugin is not deployed - hence the reason why the task you are intending to automate just stays in the received state.
    I would suggest you start by undeploying and then redeploying your cartridge.
    Of course this doesn't explain your Note2, but worth trying the above in any case.
    Can you tell me how you are submitting the order and what release of OSM you are on?
    Thanks,
    Brian.

  • Problem with recurring calendar entry

    I have a customer with a calendar which has a bunch of single day events and also 1 repeating event (daily - with no end specified)
    Each day they edit the recurring event and add details about that particular day.  This has been working fine for some time (we had the calendar in sp2007, and upgraded the site collection to sp2010 in March 2011)
    Customer pointed out that the recurring event for date 8/7/2012 and beyond now throws an error when trying to view.  The ones for 8/6 and prior (as far back as I've tested) still work fine
    ULS logs show the following errors when clicking on an item causing a problem:
    DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': Value does not fall within the expected range.
    System.ArgumentException: Value does not fall within the expected range. at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2....{and more....}
    When I look at "all site content" it shows this list has 557 entries.  The recurring item has a start date of 8/13/2010 and no end date specified.  Any idea what could be the problem here?  based on the URLs of the future items
    (which don't work) it looks like they were never modified. I can create a new recurring item and it seems to work fine.  I can't edit the recurring item to end its recurrance because if I do, it loses all the custom data that has been put in the
    daily entries.
    Based on the URLs, it looks like the "instance #" of the last recurring item that is working properly is 559 - (the last functioning URL for that series looks like this:  DispForm.aspx?ID=559.1.3)  I only mention it in case there is some limit
    to recurring items that I don't know about.
    Suggestions?
    Thanks
    -John

    Hi jj_the_Skeptic,
    So, can you debug your custom code? If you can find which line code throw the exception, then it can be find where is the problem.
    Please also ensure your SharePoint update the latest.
    Have you ever set
    query.ViewFields
    like the following code?
    query.ViewFields="<FieldRef Name='Title'/><FieldRef Name='EndDate'/><FieldRef Name='EventDate'/>";
    If you not set it, may be has some problem.
    Here I suggest you use Event Calendar Listing Web Part.
    http://www.codeproject.com/Articles/78532/Event-Calendar-Listing-Web-Part-SharePoint-2010
    Thanks,
    Jack

  • Outlook 2007 calendar - problems with recurring appointments

    In general sync appears to work. However, when amendments are made to recurring appointments I am seeing two types of problem:
    1) If I DELETE one instance of a recurring appointment in Outlook it is not deleted on the iPad.
    2) If I AMEND one instance of a recurring appointment the revised appointment appears, but so does the original one (eg if the appointment was for 10:00-11:00 and I move it to 14:00-15:00 in Outlook for just one week I end up with appontments at both times on the iPad for that day.
    In summary the iPad seems to have the simplistic view that recurring appointments will happen EVERY time period and doesn't seem to allow for the fact that there may be individual changes.
    Is this a known bug or does this work correctly for other people?
    Nick

    We have this issue at our company as well.  We have Exchange 2010 on the back end, execs with latest-model iDevices (iOS 8.1.2, iPhone 6S, iPad Air, etc.)
    These execs have several monthly and weekly recurring meetings. Sometimes, they will adjust one meeting up or down a half-hour.
    If done on the CEO's iPhone, it does not change his iPad or Outlook. If on his iPad, it doesn't change iPhone or Outlook.
    If done via Outlook, either by him or his executive assistant (delegate editor access to calendar), outlook updates but neither iPhone.
    Our Exchange admins have verified that they see the updates go from Outlook clients to Exchange and out ActiveSync.
    We finally have a SyncDiagnostics profile on the iDevices, but we have to wait for the execs to make meeting changes that don't sync.

  • Problem with Script Task formatting excel

    Hi Experts,
    I am creating a package and using Script task to format one excel dimension file, now the problem is if I execute the package from BIDS designer with static values then the package executes fine with excel file formatted perfectly fine but if I execute same package in BPC via Data manager with values used from variables it gives error on script task message:
    "Description = System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800A03EC): Microsoft Office Excel cannot access the file 'E:\PC_MS\Data\Webfolders\CDNPLAN\AdminApp\Stage\Employee.xls'. There are several possible reasons:
    u2022 The file name or path does not exist.
    u2022 The file is being used by another program.
    u2022 The workbook you are trying to save has the same name as a currently open workbook.
    at Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack)
    at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)
    at ScriptTask_2921447fa19c44dfae73d5370828ba94.vbproj.ScriptMain.Main()
    Now to crosscheck I commented the dynamic variables from the code and used same static values with Data manager as they are in BIDS but it didn't help, please find the code below and help me in solving this problem or just give me some clue to come out if this:
    Thanks & Regards,
    Rohit
    Code
    Public Sub Main()
              ' Add your code here
            'Dim FileName As String = Dts.Variables("MYWEBFOLDERS").Value & Dts.Variables("MYAPPSET").Value & "\AdminApp\Stage\" & Dts.Variables("MYDIMNAME").Value & ".xls" This I commented as it was using dynamic variables
            Dim FileName As String = "E:\PC_MS\Data\Webfolders\CDNPLAN\AdminApp\Stage\Employee.xls"
        Dim WB As Object ' Workbook
        Dim WS As Object 'Worksheet
        Dim W As Object 'Window
        Dim XL As Object 'Application
        XL = CreateObject("Excel.Application")
        XL.DisplayAlerts = False
        ' Open the workbook
        WB = XL.Workbooks.Open(FileName)
        ' WB = GetObject(FileName)
        '    XL = WB.Parent
        '    XL.DisplayAlerts = False
        WS = WB.Worksheets(1)
        W = WB.Windows(WB.Name)
        ' Change the name of the worksheet to MEMBERS
        WS.Name = "MEMBERS"
        ' Set up the split and freeze the panes
        W.SplitRow = 1
        W.SplitColumn = 1
        W.Split = True
        W.FreezePanes = True
        ' Make it visible
        W.Visible = True
        ' Replace *ID column header with ID
        Dim Row1 As Object
        Row1 = WS.UsedRange.Rows("1:1")
        Dim I As Integer
        For I = 1 To Row1.Columns.Count
          If Row1.Cells(I, 1).Value = "*ID" Then
            Row1.Cells(I, 1).value = "ID"
            Exit For
          End If
        Next
        ' Paste Values
        WS.UsedRange.NumberFormat = "@"
        WS.UsedRange.Value = WS.UsedRange.Value
        ' Change the font of everything to Arial,9
        With WS.Cells.Font
          .Name = "Arial"
          .Size = 9
        End With
        ' Format the top row to be bold and orange
        With WS.Rows("1:1")
          .Font.Bold = True
          .Interior.ColorIndex = 44 'orange
        End With
        ' Auto-fit all the columns
        WS.Cells.EntireColumn.AutoFit()
        ' Convert to Excel format
        Const xlNormal = -4143
        WB.Parent.DisplayAlerts = False
        WB.SaveAs(FileName:=FileName, FileFormat:=xlNormal, Password:="", WriteResPassword:="", ReadOnlyRecommended:=False, CreateBackup:=False)
            ' Close and save changes
            WS = Nothing
            WB.Close()
            W = Nothing
        ' Quit Excel
            XL.Quit()
            XL = Nothing
        Dts.TaskResult = ScriptResults.Success
         End Sub

    Hi,
    If you do not define GLOBAL VARIABLE in your BPC package and BIDS, why don't you try to have it? you should specify the webfolder and file name in advanced script, then you also need to create global variable as text type in BIDS.
    I saw many cases BPC does not pass the dynamic variable to BIDS, therefore I changed the type of variable as the Global variable and it works for me.
    Regards,
    YH Seo

  • Problem with recurring events - iPhone / iPad, Windows 7 & Outlook

    Hi
    Could someone please advise on an issue that I am having on both my iPhone & my iPad. I have added Bank Holidays to my PC outlook calendar to sync with both my iPhone & iPad. 99% of my events sync perfectly well however I am having issues with the Bank Holidays that aren't always on the same date e.g. May Day which is always on the first Monday of May. For this one I have set up my recurrence to be exactly that - yearly, on the first Monday of May. It appears perfectly in Outlook however when I sync to my devices the first in the series is fine but the rest are shifted by a day or two. As far as I can tell all my other events are fine, the problem is only with those that I have set up a recurrence such as "on the first ..." or "on the last..." (I see the same issue with the other May Bank Holiday & the August one, both last Monday in the month). Am I doing something wrong??
    Thanks in advance
    Nigel

    Hi,
    I have same issue - any solutions yet?
    Kent

Maybe you are looking for