Problem with referenced libraries (after flash 5.5 trial install/uninstall)

I've been using flash builder 4 & flash cs5 with on problems.
I unstalled flash 5.5 trial version to have a play around, then uninstalled it. I also changed the flex sdk version flash builder was using so I could export and test stageVideo.
Now when making Flash Professional Project in flash builder ( and selectiong and selecting the main fla), the referenced libraries are not imported to the project, and all old predicts ( which have referenced librares and used to work) are looking for swc's held in the 'Adobe Flash CS5.5' folder, and so none of the code hinting is working.
Help please

Hi MoTor,
You would need to uninstall existing Flash Builder 4.5 on your machine and then install Flash Builder 4.6 in trial mode.
During installation, it doesn't accept the serial number of Master Collection. So, just install it in trial mode and make sure that the you select the same language as that of your Master Collection, during FB installation.
Now launch FB and it would then accept Master Collection CS 5.5 serial number.
http://kb2.adobe.com/cps/924/cpsid_92402.html is the related tech note.
Hope this helps.
Regards,
Anand

Similar Messages

  • Problem with Aironet 1130AG after flashing IOS

    Worked fine until the IOS was updated with c1130-rck9w8-tar.124-10b.JA3. Since then I'm not able to browse to the GUI interface.
    Version info:
    Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.4(10b)JA3, RELE
    ASE SOFTWARE (fc1)
    Compiled Wed 19-Mar-08 17:53 by prod_rel_team
    ROM: Bootstrap program is C1130 boot loader
    BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (
    fc2)
    AP001d.e555.21c6 uptime is 24 minutes
    System returned to ROM by power-on
    System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
    cisco AIR-AP1131AG-A-K9 (PowerPCElvis) processor (revision A0) with 24566K/81 92K bytes of memory.
    Processor board ID FTX1210T01G
    PowerPCElvis CPU at 262Mhz, revision number 0x0950
    Last reset from power-on
    LWAPP image version 3.0.51.0
    1 FastEthernet interface
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:1D:E5:55:21:C6
    Part Number : 73-8962-12
    PCA Assembly Number : 800-24818-11
    PCA Revision Number : B0
    PCB Serial Number : FOC120724T8
    Top Assembly Part Number : 800-29230-01
    Top Assembly Serial Number : FTX1210T01G
    Top Revision Number : A0
    Product/Model Number : AIR-AP1131AG-A-K9
    Configuration register is 0xF
    Configuration is attached.
    Appreciate any assistance in getting this device out of the error state.

    Just curious if your AP was originally an IOS AP? The code you used is an LWAPP image and requires a Wireless LAN COntroller. The "rck" in the file name means recovery code for LWAPP. If you need to have an IOS AP, then follow this doc to convert LWAPP back to Autonomous,
    http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

  • Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    The latest flash player release is 11,0,1,152.
    Can you upgrade to this version and see whether the crash stil exists?
    Go to get.adobe.com/flashplayer to download and install flash player.
    In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
    saranlee wrote:
    My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows  which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Problem with the workbook after upgrade

    Hi all,
    We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
    1. What could be the possible reason behind this?
    2. What exactly got changed in the system which reflected this problems?
    3. What other problems might have occurred which we may not have noticed?
    4. How can I find out the number of workbooks affected due to this?

    Dear ,
    This is known issue:
    Please implement the below mentioned note as this will solve your issue,
    Note 1609237 :  Subsequent correction to 1567679
    Regards,
    Arvind

  • Problem with iWeb 09, after the publication in a local file.

    *Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
    After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
    Please help me.

    I want to activate the comments, it doesn't work neither.
    The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

  • Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

    Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac? 

    Peggy
    You are probably correct. I tried all different variations to test it. As long as I quit each document separately, i.e., red dot it, I seem to bring up only one document after that whether I click on the document itself or open it within pages. The same is true with numbers.
    Two more questions:
    1) can you turn off the "resume" feature? If so, how? I could not find a way to do it.
    2) why the "save a version" feature in pages? What happened to the old "save" and "save as" features?
    Thanks so much, you saved me a lot of frustration but I am still going to install MS Office for Mac.
    Daveben

  • Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

    Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
    my new house is expansive so i wanted the extended range and airplay in each room.
    This is not told to customers, and utility doesnt show any issues.
    I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
    Any advice ?
    LJx
    Message was edited by: LJLDN
    Message was edited by: LJLDN

    Sorry couldn't change the detonations to Airport and am new so cant delete!

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

  • Has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    fair enough.  No need for any unnecessary posts either.  You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
    In any case, I hope that your problem was solved.

  • Problem with Maintenance Optimizer after first step

    Hi all,
    I have problem with Maintenance Optimizer after I choose system and save transaction, I click on Continue button, but nothing happens....
    Any ideas?
    Regards,
    Lazar Hristov

    I resolved my problem.
    I activate from spro -> Initial Configuration II, then activate BC Set for mopz and now everything works fine.
    Regards,
    Lazar Hristov

  • I am having problem with my sound, after i updated to ios 6, apple please help

    i am having problem with my sound, after i updated to ios 6, i can hear music with headphone only, apple please help

    Try going into your settings and 'reset all settings'
    You will need to retweak your device but it's been said to help with sound issues.

  • Having problem with my camera after updating 8.1.3

    having problem with my camera after updating 8.1.3.. how will you fix this

    Try Resetting your phone: hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons. If this does not work Restore your iPhone in iTunes.

  • TS1559 i am have a problem with wi-fi after i update my system to IOS 7.1

    i am have a problem with wi-fi after i update my system to IOS 7.1

    And what would that problem entail?
    Did you look at the link that you tagged?

  • Hi guys, problem with grey screen and flashing question mark. on top of it while in utility, i'm unable to verify, verify disc permission or repair disc0 which is obviously my main hd. any ideas where to go from here? tried to reistall osx but no luck.

    hi guys, problem with grey screen and flashing question mark. should be straight forward affair but on top of it while in disc utility, i'm unable to verify, verify disc permission, repair or even erase disc0 which is obviously my main hd. any ideas where to go from here? tried to reinstall osx but no luck, stucked when asked to chose location to install osx. would really apreciate any kind of help with this cause i'm quite new mac user. ty

    If you don't have a backup, read this:
    https://discussions.apple.com/docs/DOC-1689

Maybe you are looking for

  • Acidized files & Logic

    I still can't figure out why my .wav format Acidized loops won't work in Logic. If I drag the loop directly from its folder onto the arrange pane it should stretch or compress to whatever master tempo Logic is at, correct? The loops are 16/44.1. Will

  • Customizing FBL1N - FB02 // Can not modify field PAYEE in document display

    Hi, When opening line items in FBL1N for a particular Vendor and selecting, open items. In the document display I have a field called 'PAYEE' (BSEG-EMPFB) This field in the first document is enabled. Although on the second document this field is disa

  • My Super Drive suddenly stopped ejecting a CD - stuck

    My Super Drove which has been working for 3 months and hundreds of CDs suddenly stopped reading a "home-made" audio CD after it was inserted and will not eject.  You can feel the mechanism cycling.  How do you get a stuck cd out?

  • OSB - Simple passthrough

    I'm sorry to ask what's probably going to sound laughably trivial, but I'm a bit stuck. I've created a simple ADFbc web service using one of the tutorials out there and I have the basic getEmp1, createEmp, updateEmp SOAP methods. I'm trying to follow

  • Lenovo B575 screen just fades away

    New here so here goes.....I own a Lenovo B575, great piece of equipment...BUT on occasion the following happens. 1.  I am done doing what I wanted so I go to START/LOG OFF. 2.  Now I want to resume some time later so I click on my personal ICON and t