Problem with refresh_table_display
Hi there. I've got a code
* INCLUDE ZWOP_LISTING_INCL_UKOLY *
*& Module STATUS_1024 OUTPUT
* text
MODULE STATUS_1024 OUTPUT.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
DATA: line LIKE LINE OF G_ukoly .
* EDITOR
DATA: L_utext TYPE ls_lch8192 OCCURS 0 .
DATA: L_utmp LIKE zlhist03 .
DATA: L_utmp2 LIKE zlhist04 .
DATA: L_txt01(100) TYPE c .
IF c_ukol02 IS INITIAL .
create object c_ukol02
exporting
container_name = 'C_UKOL02' .
create object e_ukol02
exporting
parent = c_ukol02
wordwrap_mode = cl_gui_textedit=>wordwrap_at_fixed_position
wordwrap_position = 80
exceptions
others = 1.
call method e_ukol02->set_statusbar_mode
exporting statusbar_mode = 1.
call method e_ukol02->set_toolbar_mode
exporting toolbar_mode = 1.
ENDIF .
CALL METHOD e_ukol02->delete_text .
* REFRESH L_utext .
* CLEAR L_utmp2 .
* 01
IF ( C_UKOL01 IS INITIAL ) .
CREATE OBJECT c_ukol01
EXPORTING container_name = 'C_UKOL01'.
ENDIF .
IF ( g_report01 IS INITIAL ) .
CREATE OBJECT g_ukol01
EXPORTING i_parent = c_ukol01 .
PERFORM fieldcat_ukol01 .
is_lay_ukol01-no_toolbar = 'X' .
is_lay_ukol01-no_rowmark = 'X' .
SET HANDLER lcl_event_receiver=>e_udclick
FOR g_ukol01 .
CALL METHOD g_ukol01->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_modified .
CALL METHOD g_ukol01->set_table_for_first_display
EXPORTING is_layout = is_lay_ukol01
i_save = 'A'
CHANGING
it_outtab = G_ukoly[]
it_fieldcatalog = ws_fcat_ukol01 .
ELSE .
CALL METHOD g_ukol01->refresh_table_display .
ENDIF .
LOOP AT SCREEN .
IF ( SCREEN-NAME EQ 'B_UOK' ) .
IF ( session_u-umode EQ 'N' ) OR ( session_u-umode EQ 'E' ) .
SCREEN-ACTIVE = 1 .
MODIFY SCREEN .
ELSE .
SCREEN-ACTIVE = 0 .
MODIFY SCREEN .
ENDIF .
ENDIF .
ENDLOOP .
CLEAR: L_txt01 .
WRITE ICON_MESSAGE_INFORMATION_SMALL TO L_txt01 AS ICON .
IF ( session_u-umode EQ 'N' ) .
CONCATENATE L_txt01 'Enter new text and press Ok' INTO L_txt01 .
WRITE L_txt01 TO i_ucomm01 .
ELSEIF ( session_u-umode EQ 'E' ) .
CONCATENATE L_txt01 'Change text and press Ok' INTO L_txt01 .
WRITE L_txt01 TO i_ucomm01 .
ELSE .
CLEAR i_ucomm01 .
ENDIF .
REFRESH L_text .
READ TABLE G_ukoly INTO line INDEX session_u-uidx .
APPEND line-text TO L_text .
CALL METHOD e_ukol02->set_text_as_stream EXPORTING text = L_text .
ENDMODULE. " STATUS_1024 OUTPUT
*& Module USER_COMMAND_1024 INPUT
* text
MODULE USER_COMMAND_1024 INPUT.
DATA: ucode LIKE sy-ucomm .
DATA: unum_max TYPE i .
DATA: L_ctext TYPE ls_lch8192 OCCURS 0 .
DATA: L_cline LIKE LINE OF L_text.
DATA: L_clenght TYPE i .
DATA: clongchar TYPE ls_lch8192 .
ucode = sy-ucomm .
CLEAR sy-ucomm .
CLEAR zlhist03 .
* CLEAR session_u .
CASE ucode .
WHEN 'F_ULEAVE' .
* REFRESH data415 .
CLEAR session_u .
LEAVE TO SCREEN 0 .
WHEN 'F_UNEWTASK' .
session_u-umode = 'N' .
CALL METHOD e_ukol02->delete_text .
WHEN 'F_UOK' .
IF ( session_u-umode EQ 'N' ) .
SELECT SINGLE MAX( unum ) FROM zlhist03 INTO zlhist03-unum
WHERE snr = session_p-snr AND
bukrs = session_p-bukrs AND
matkl = xmatkl .
CALL METHOD e_ukol02->get_text_as_stream
IMPORTING text = L_ctext .
LOOP AT L_ctext INTO L_cline.
CONCATENATE clongchar L_cline INTO clongchar.
ENDLOOP.
L_clenght = strlen( clongchar ).
zlhist03-snr = session_p-snr .
zlhist03-bukrs = session_p-bukrs .
zlhist03-matkl = xmatkl .
zlhist03-unum = zlhist03-unum + 1 .
zlhist03-delka = L_clenght .
zlhist03-text = clongchar .
IF ( L_clenght GT 0 ) .
MODIFY zlhist03 .
G_ukoly-unum = session_u-unum .
G_ukoly-delka = L_clenght .
G_ukoly-text = clongchar .
APPEND G_ukoly . " <= itab change
ENDIF .
CLEAR session_u-umode .
ELSEIF ( session_u-umode EQ 'E' ) .
CALL METHOD e_ukol02->get_text_as_stream
IMPORTING text = L_ctext .
LOOP AT L_ctext INTO L_cline.
CONCATENATE clongchar L_cline INTO clongchar.
ENDLOOP.
L_clenght = strlen( clongchar ).
zlhist03-snr = session_p-snr .
zlhist03-bukrs = session_p-bukrs .
zlhist03-matkl = xmatkl .
zlhist03-unum = session_u-unum .
zlhist03-delka = L_clenght .
zlhist03-text = clongchar .
IF ( L_clenght GT 0 ) .
MODIFY zlhist03 .
G_ukoly-unum = session_u-unum .
G_ukoly-delka = L_clenght .
G_ukoly-text = clongchar .
MODIFY G_ukoly INDEX session_u-uidx . " <= itab change
ENDIF .
CLEAR session_u-umode .
ENDIF .
WHEN 'F_UDELTASK' .
ENDCASE .
ENDMODULE. " USER_COMMAND_1024 INPUT
*& Form fieldcat_ukol01
* text
* --> p1 text
* <-- p2 text
FORM fieldcat_ukol01.
* PERFORM append_wsfield_15 USING ws_field_report01 ws_fieldcat_report01
* 'ICON' '' 0 1 0 '' 2 '' '' '' '' '' '' '' '' .
PERFORM append_wsfield_15 USING ws_field_ukol01 ws_fcat_ukol01
'TEXT' '' 0 1 0 'Text' 50 '' '' '' '' '' '' '' '' .
ENDFORM. " fieldcat_ukol01
the doubleclick event is handled by
METHOD e_udclick .
DATA: line LIKE LINE OF G_ukoly .
READ TABLE G_ukoly INTO line INDEX e_row-index .
session_u-umode = 'E' . " EDIT
session_u-unum = line-unum .
session_u-uidx = e_row-index .
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'SOMECODE'.
ENDMETHOD .
when I douleclick grid row - text is to be shown in editor. Then I can modify that text and save. Save is done into database and into grid sourcetab G_ukoly. The problem is that G_ukoly is refreshed - modified rows are saved into that tab (it can be observed), but when displaying grid - old content is still visible, even after refresh_table_display . What am I doing wrong?
Edited by: Piotr Wojciechowski on Apr 23, 2008 3:05 PM
Problem still exists
Sorry, I posted it by mistake
Edited by: Piotr Wojciechowski on Apr 23, 2008 11:07 PM
Similar Messages
-
ALV GRID Problem with reading contents
Hi there! I'm quite new with ABAP and I have some problems with the syntax of it. Maybe I should first describe my aim and then I'll show you my code.
1. I read contents from two database tables, called 'zbc_dan_registry' and 'zbc_dan_category'.
'zbc_dan_registry' has 2 columns: name, value.
zbc_dan_category' has 1 column: category.
Now I want to have an ALV Grid, that displays the contents of 'zbc_dan_registry' and one additional column with dropdown fields, where the user can select a category for each row. This is, what my code already does.
Now I want to save the contents of the whole table in a new table 'zbc_dan_registrz' (you see: 'registrz', not 'registry'!) with 3 columns:
name, category, value.
My problem is, how can I read the contents of the ALV Grid, with the user selected category for each row, and save them in an internal table? I've tried to adapt the code of "BCALV_EDIT_04", but I don't get it running.
Some detailled help would be great, you know, I'm really working hard to understand ABAP, but it's really hard for me. Thanks for your support and help!!
Here's my code so far:
*& Report ZBC400_DAN_TESTNO4
REPORT ZBC400_DAN_TESTNO4.
DATA: lt_registrz TYPE TABLE OF zbc_dan_regstrz WITH HEADER LINE,
lt_category TYPE TABLE OF zbc_dan_category WITH HEADER LINE,
ls_category TYPE zbc_dan_category, "Struktur Kategorie
ok_code LIKE sy-ucomm,
container_r TYPE REF TO cl_gui_custom_container,
grid_r TYPE REF TO cl_gui_alv_grid,
gc_custom_control_name TYPE scrfname VALUE 'CONTAINER_REG',
fieldcat_r TYPE lvc_t_fcat,
layout_r TYPE lvc_s_layo,
lt_ddval TYPE lvc_t_drop,
ls_ddval TYPE lvc_s_drop,
c TYPE i.
CLASS lcl_event_receiver DEFINITION DEFERRED.
DATA g_verifier TYPE REF TO lcl_event_receiver.
DATA: BEGIN OF gt_outtab OCCURS 0.
INCLUDE STRUCTURE zbc_dan_regstrz.
DATA: celltab TYPE lvc_t_styl.
DATA: END OF gt_outtab.
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
TYPES: BEGIN OF lt_registrz_key. "Struktur mit den Schlüsseln der Tabelle 'Registry'
TYPES: name TYPE zbc_dan_name,
value TYPE zbc_dan_value,
category TYPE zbc_dan_cat.
TYPES: END OF lt_registrz_key.
TYPES: ls_registrz_keys TYPE STANDARD TABLE OF lt_registrz_key,
ls_registrz_table TYPE STANDARD TABLE OF zbc_dan_regstrz.
METHODS: get_inserted_rows EXPORTING inserted_rows TYPE ls_registrz_keys.
METHODS: refresh_delta_tables.
METHODS: handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid IMPORTING er_data_changed.
* METHODS: get_inserted_rows EXPORTING inserted_rows TYPE registrz_keys.
* METHODS: refresh_delta_tables.
PRIVATE SECTION.
DATA: inserted_rows TYPE ls_registrz_keys.
DATA: error_in_data TYPE c.
METHODS: get_cell_values IMPORTING row_id TYPE int4 pr_data_changed TYPE REF TO cl_alv_changed_data_protocol EXPORTING key TYPE lt_registrz_key.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_data_changed.
DATA: ls_good TYPE lvc_s_modi,
ls_new TYPE lvc_s_moce.
error_in_data = space.
IF error_in_data = 'X'.
CALL METHOD er_data_changed->display_protocol.
ENDIF.
ENDMETHOD.
METHOD get_cell_values.
CALL METHOD pr_data_changed->get_cell_value
EXPORTING i_row_id = row_id i_fieldname = 'NAME'
IMPORTING e_value = key-name.
CALL METHOD pr_data_changed->get_cell_value
EXPORTING i_row_id = row_id i_fieldname = 'VALUE'
IMPORTING e_value = key-value.
CALL METHOD pr_data_changed->get_cell_value
EXPORTING i_row_id = row_id i_fieldname = 'CATEGORY'
IMPORTING e_value = key-category.
ENDMETHOD.
METHOD get_inserted_rows.
inserted_rows = me->inserted_rows.
ENDMETHOD.
METHOD refresh_delta_tables.
clear me->inserted_rows[].
ENDMETHOD.
ENDCLASS.
START-OF-SELECTION.
SELECT client name value
INTO CORRESPONDING FIELDS OF TABLE lt_registrz FROM zbc_dan_regstry.
SELECT category INTO CORRESPONDING FIELDS OF TABLE lt_category FROM zbc_dan_category.
CALL SCREEN 0100.
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'BACK'.
SET SCREEN 0.
MESSAGE ID 'BC400' TYPE 'S' NUMBER '057'.
WHEN 'SAVE'.
PERFORM save_data.
WHEN OTHERS.
ENDCASE.
ENDMODULE.
MODULE clear_ok_code OUTPUT.
CLEAR ok_code.
ENDMODULE.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'DYNPRO100'.
SET TITLEBAR 'D0100'.
ENDMODULE.
MODULE display_alv OUTPUT.
PERFORM display_alv.
ENDMODULE.
FORM display_alv.
IF grid_r IS INITIAL.
*----Creating custom container instance
CREATE OBJECT container_r
EXPORTING
container_name = gc_custom_control_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
*----Creating ALV Grid instance
CREATE OBJECT grid_r
EXPORTING
i_parent = container_r
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
CREATE OBJECT g_verifier.
SET HANDLER g_verifier->handle_data_changed FOR grid_r.
*----Preparing field catalog.
PERFORM prepare_field_catalog CHANGING fieldcat_r.
*----Preparing layout structure
PERFORM prepare_layout CHANGING layout_r.
*----Here will be additional preparations
*--e.g. initial sorting criteria, initial filtering criteria, excluding
*--functions
CALL METHOD grid_r->set_table_for_first_display
EXPORTING
* I_BUFFER_ACTIVE =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
is_layout = layout_r
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
CHANGING
it_outtab = lt_registrz[]
it_fieldcatalog = fieldcat_r
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
ELSE.
CALL METHOD grid_r->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
ENDIF.
CALL METHOD grid_r->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_enter.
CALL METHOD grid_r->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_modified.
ENDFORM.
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'ZBC_DAN_REGSTR2'
CHANGING
ct_fieldcat = pt_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
LOOP AT pt_fieldcat INTO ls_fcat.
CASE ls_fcat-fieldname.
WHEN 'NAME'.
ls_fcat-coltext = 'Name'.
ls_fcat-outputlen = '40'.
MODIFY pt_fieldcat FROM ls_fcat.
WHEN 'VALUE'.
ls_fcat-coltext = 'Wert'.
ls_fcat-outputlen = '30'.
MODIFY pt_fieldcat FROM ls_fcat.
WHEN 'CATEGORY'.
LOOP AT lt_category into ls_category.
ls_ddval-handle = 1.
ls_ddval-value = ls_category-category.
* ls_ddval-style = cl_gui_alv_grid=>mc_style_enabled.
APPEND ls_ddval TO lt_ddval.
ENDLOOP.
CALL METHOD grid_r->set_drop_down_table
EXPORTING it_drop_down = lt_ddval.
ls_fcat-edit = 'X'.
ls_fcat-drdn_hndl = '1'.
ls_fcat-coltext = 'Kategorie'.
MODIFY pt_fieldcat FROM ls_fcat.
ENDCASE.
ENDLOOP.
ENDFORM.
FORM prepare_layout CHANGING ps_layout TYPE lvc_s_layo.
ps_layout-zebra = 'X'.
ps_layout-grid_title = 'Kategorie zur Registry hinzufügen'.
ps_layout-smalltitle = 'X'.
ENDFORM.
FORM save_data.
DATA: ls_ins_keys TYPE g_verifier->ls_registrz_keys,
ls_ins_key TYPE g_verifier->lt_registrz_key,
ls_registrz TYPE zbc_dan_regstrz,
ls_outtab LIKE LINE OF gt_outtab,
lt_instab TYPE TABLE OF zbc_dan_regstrz.
CALL METHOD g_verifier->get_inserted_rows IMPORTING inserted_rows = ls_ins_keys.
LOOP AT ls_ins_keys INTO ls_ins_key.
READ TABLE gt_outtab INTO ls_outtab
WITH KEY name = ls_ins_key-name
value = ls_ins_key-value
category = ls_ins_key-category.
IF sy-subrc = 0.
MOVE-CORRESPONDING ls_outtab TO ls_registrz.
APPEND ls_registrz TO lt_instab.
ENDIF.
ENDLOOP.
INSERT zbc_dan_regstrz FROM TABLE lt_instab.
CALL METHOD g_verifier->refresh_delta_tables.
ENDFORM.Hi Hans,
You raised the Question in the Webdynpro ABAP forum. Here its very diffcult to get the answer from this forum. Please close it here and raise the same question in ABAP General Forum there you will get faster and so many anwsers.
Please close the question here.
Warm Regards,
Vijay -
hai ,
I have problem with my interactive alv ,
when i double click the line item the same line item is displaying for all the selections ..
LASS lcl_event_handler IMPLEMENTATION.
METHOD on_double_click.
find out selected line (double click)
READ TABLE i_fd INTO w_fd INDEX e_row-index.
IF sy-subrc NE 0.
MESSAGE i075(bc412). " <-- internal error
EXIT.
ENDIF.
"CLEAR i_popup.
LOOP AT i_trdt INTO w_trdt WHERE deal_number = w_fd-rfha .
IF sy-tabix GT 1.
CLEAR w_trdt-deal_number.
ENDIF.
APPEND w_trdt TO i_popup.
ENDLOOP.
CLEAR : w_fd , w_trdt .
IF i_popup IS NOT INITIAL .
CREATE OBJECT ref_container
EXPORTING
parent =
container_name = 'CONTAINER1'
style =
lifetime = lifetime_default
repid =
dynnr =
no_autodef_progid_dynnr =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CREATE OBJECT ref_alv
EXPORTING
i_shellstyle = 0
i_lifetime =
i_parent = ref_container
i_appl_events = space
i_parentdbg =
i_applogparent =
i_graphicsparent =
i_name =
i_fcat_complete = space
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
PERFORM form_layout.
PERFORM f_cat.
CALL METHOD ref_alv->refresh_table_display.
CALL METHOD g_alv->refresh_table_display.
ENDIF.
CALL METHOD g_alv->refresh_table_display.
CLEAR i_popup.
ENDMETHOD. "on_double_click
ENDCLASS. "lcl_event_handler IMPLE
Regards,
K,Vinay KumarHi,
Try..
READ TABLE i_fd INTO w_fd INDEX es_row_no-index.
Hope it helps you.
Murthy -
I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
Thank you in advance,
LeftyThis was one solution from the socket programming forum, have you tried this??
public Thread MyThread extends Thread{
boolean active = true;
public void run(){
ss.setSoTimeout(90);
while (active){
try{
serverSocket = ss.accept();
catch (SocketTimeoutException ste){
// do nothing
// interrupt thread
public void deactivate(){
active = false;
// you gotta sleep for a time longer than the
// accept() timeout to make sure that timeout is finished.
try{
sleep(91);
}catch (InterruptedException ie){
interrupt();
} -
Problem with Threads and a static variable
I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
protected static void Init(){
objMainProcess = new Thread() {
public void run() {
while( objMainProcess == Thread.currentThread() ) {
GetState();
objMainProcess.setDaemon( true );
objMainProcess.start();
public static void initStatusTimer(){
if(objTimer == null)
objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
public void actionPerformed( java.awt.event.ActionEvent evt){
SetState();
private static void SetState(){
if( objMainProcess == null ) return;
synchronized( objMainProcess ) {
bChanged = true;
try{
objMainProcess.notify();
}catch( IllegalMonitorStateException e ) {}
private static boolean GetState() {
if( objMainProcess == null ) return false;
synchronized( objMainProcess ) {
if( bChanged) {
SendMessage();
bChanged = false;
return true;
try {
objMainProcess.wait();
}catch( InterruptedException e ) {}
return false;
}Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D. -
Problem with threads running javaw
Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue; // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer) // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
// System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
}catch(Exception a){
JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run -
Problem with threads and camera.
Hi everybody!
I've a problem with taking snapshot.
I would like to display a loading screen after it take snapshot ( sometimes i
have to wait few seconds after i took snapshot. Propably photo is being taken in time where i have to wait).
I was trying to use threads but i didn't succeed.
I made this code:
display.setCurrent(perform);
new Thread(new Runnable(){
public void run() {
while((!performing.isShown()) && (backgroundCamera.isShown())){
Thread.yield();
notifyAll();
}).start();
new Thread(new Runnable(){
public void run() {
try {
this.wait();
} catch(Exception e) {
exceptionHandler(e);
photo = camera.snapshot();
display.setCurrent(displayPhoto);
}).start();This code is sometimes showing performing screen but sometimes no.
I don't know why. In my opinion performing.isShown() method isn't working correctly.
Does anyone have some idea how to use threads here?Hi,
I've finally managed to work this fine.
The code:
Object o = new Object();
display.setCurrent(perform);
new Thread(new Runnable(){
public void run() {
while(!performing.isShown()){
Thread.yield();
synchronized(o) {
o.notify();
}).start();
new Thread(new Runnable(){
public void run() {
try {
synchronized(o) {
o.wait(1);
} catch(Exception e) {
exceptionHandler(e);
photo = camera.snapshot();
display.setCurrent(displayPhoto);
}).start(); -
We have a problem where our application stops responding after a few days of usage. Things will for fine for a day or two, and then pretty quickly threads will start getting hung up, usually in places where they are allocating memory
We are running WebLogic 8.1 SP2 on Sun JDK 1.4.2_04 on Solaris 8 using the alternate threading model and the -server hotspot vm. We are running pretty much the same code that we had no problems with under WebLogic 6.1 SP4 and Sun JDK 1.3.1.
A thread dump usually shows that some or all of our execute threads are in the state "waiting for monitor entry" even though they are not currently waiting on any java locks. Here is a sample thread from the thread dump (we have ~120 threads so I don't want to post the full dump).
=============================================================================================
"ExecuteThread: '8' for queue: 'itgCrmWarExecutionQueue'" daemon prio=5 tid=0x005941d0 nid=0x2c waiting for monitor entry [c807f000..c807fc28]
at java.lang.String.substring(String.java:1446)
at java.lang.String.substring(String.java:1411)
at weblogic.servlet.internal.ServletRequestImpl.getRelativeUri(ServletRequestImpl.java:1872)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3492)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
=============================================================================================
String.java line 1446 for this jdk allocates a new String object, and all the other threads in this state also are creating new objects or arrays, etc.
We've done a pstack on this process when it's in this state, and the threads that are in the "waiting for monitor entry" that look like they're allocating memory are all waiting on the same lwp_mutex_lock with some allocation method that's calling into the native TwoGenerationCollectorPolicy.mem_allocate_work (see pstack output below for the same thread as in the thread dump above)
=============================================================================================
----------------- lwp# 44 / thread# 44 --------------------
ff31f364 lwp_mutex_lock (e3d70)
fee92384 __1cNObjectMonitorGenter26MpnGThread__v_ (5000, 525c, 5000, 50dc, 4800, 4af0) + 2d8
fee324d4 __1cSObjectSynchronizerKfast_enter6FnGHandle_pnJBasicLock_pnGThread__v_ (c807f65c, c807f7d4, 5941d0, 0, 35d654, fee328ec) + 68
fee32954 __1cQinstanceRefKlassZacquire_pending_list_lock6FpnJBasicLock__v_ (c807f7d4, ff170000, d4680000, 4491d4, fee1bc2c,
0) + 78
fee3167c __1cPVM_GC_OperationNdoit_prologue6M_i_ (c807f7bc, 4400, ff170000, 2d2b8, 4a6268, c807fa18) + 38
fee2e0b0 __1cIVMThreadHexecute6FpnMVM_Operation__v_ (c807f7bc, 963a8, 0, 0, 1, 0) + 90
fed2c2a4 __1cbCTwoGenerationCollectorPolicyRmem_allocate_work6MIii_pnIHeapWord__ (962c0, ff1c29ec, ff1c297c, ff131a26, 4800, 4998) + 160
fed22940 __1cNinstanceKlassRallocate_instance6MpnGThread__pnPinstanceOopDesc__ (ee009020, 5941d0, 15ca581, 3647f0, 4a6268, c807f8c8) + 180
fed34928 __1cLOptoRuntimeFnew_C6FpnMklassOopDesc_pnKJavaThread__v_ (ee009018, 5941d0, 0, 0, 0, 0) + 28
fa435a58 ???????? (ee009018, e86de, 15ca4de, 50dc, 5941d0, c807f9c8)
fb36f9a4 ???????? (0, d412ccd8, ee046c28, ff170000, 0, 0)
fad8b278 ???????? (ee046c28, d6000c90, ee046530, 8, db8e8450, c807f9e8)
fad62abc ???????? (d412ccd8, ee046530, d6000c90, ee3bfa38, 8, c807fa18)
fa4b3c38 ???????? (c807fb9c, 0, f2134700, fa415e50, 8, c807faa8)
fa40010c ???????? (c807fc28, c807fe90, a, ee9e1e20, 4, c807fb40)
fed5d48c __1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_ (c807fe88, c807fcf0, c807fda8, 5941d0, 5941d0, c807fd00) + 27c
fee4b784 __1cJJavaCallsMcall_virtual6FpnJJavaValue_nLKlassHandle_nMsymbolHandle_4pnRJavaCallArguments_pnGThread__v_ (ff170000, 594778, c807fd9c, c807fd98, c807fda8, 5941d0) + 164
fee5e8dc __1cJJavaCallsMcall_virtual6FpnJJavaValue_nGHandle_nLKlassHandle_nMsymbolHandle_5pnGThread__v_ (c807fe88, c807fe84, c807fe7c, c807fe74, c807fe6c, 5941d0) + 6c
fee6fc74 __1cMthread_entry6FpnKJavaThread_pnGThread__v_ (5941d0, 5941d0, 838588, 594778, 306d10, fee69254) + 128
fee6927c __1cKJavaThreadDrun6M_v_ (5941d0, 2c, 40, 0, 40, 0) + 284
fee6575c _start (5941d0, fa1a1600, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Also when it's having this problem, the "VM Thread" is always using a lot of processor time. We did a couple of pstacks today while it was having this problem, and this thread was stuck in the ONMethodSweeper.sweep for over 15 minutes when we finally killed the server.
From the thread dump:
"VM Thread" prio=5 tid=0x000e2d20 nid=0x2 runnable
From the first pstack:
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed40c04 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (42a2f4, fa5fa46d, ffffffff, fc4ffcb8, 42a2f4, 42a324) + 124
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (42a2f0, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (fa5f7f88, fa608940, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Second pstack
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed41180 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (0, ff1b9664, ffffffff, fc4ffcb8, a6f2cc, fc4ffbd0) + 6a0
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (a6f2c8, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (faded4c8, fadf2c80, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Has anyone ever seen anything like this? I'm trying to figure out if this is caused by something we're doing, or something relating to our environment and jvm options. Any ideas?Thanks for the reply - I'm testing our app with the +UseConcMarkSweepGC now in our test environment to make sure it doesn't cause any problems there. Unfortunately the only place we've had this problem is on the production server, so it's extra difficult debugging this.
We're using the following memory options:
-ms512m -mx512m -XX:NewSize=128m -XX:PermSize=192m -XX:MaxNewSize=128m -XX:MaxPermSize=192m -XX:SurvivorRatio=8and the following debugging options, as we've also been seeing OutOfMemoryErrors ( see http://forum.java.sun.com/thread.jsp?forum=37&thread=522354&tstart=45&trange=15 )
-verbosegc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGCBTW, which c++filt version and options are you using? Our Solaris boxes only seem to have the GNU version installed. I was trying to run that on some of the other stack traces and wasn't getting anywhere, and didn't know if because it was GNU version wouldn't work on something compiled with the Sun compiler.
Thanks!
--Andy -
Problem with threads and ProgressMonitor
Dear Friends:
I have a little problem with a thread and a ProgressMonitor. I have a long time process that runs in a thread (the thread is in an separate class). The thread has a ProgressMonitor that works fine and shows the tasks progress.
But I need deactivate the main class(the main class is the user interface) until the thread ends.
I use something like this:
LongTask myTask=new LongTask();
myTask.start();
myTask.join();
Now, the main class waits for the task to end, but the progress monitor don`t works fine: it shows only the dialog but not the progress bar.
What's wrong?Is the dialog a modal dialog? This can block other UI updates.
In general, you should make sure that it isn't modal, and that your workThread has a fairly low priority so that the UI can do its updating -
Problem with threads and/or memory
I'm developing an application where there are 3 threads. One of them sends a request to the other, and if the 2nd can't answer it, it sends it to the 3rd (similar to CPU -> CACHE -> MEMORY). When i run the program with 1000-10.000 requests, no problem occurs. When i run it with 300.000-1.000.000 requests, it sometimes hangs. Is this a problem with the garbage collector, or should it be related to the threads mecanism.
(note: eache thread is in execution using a finite state machine)i had been running the program inside Netbeans.
Running the jar using the command line outside
Netbeans i have no more problems... Does Netbeans use
it's own JVM?Depends how you set it up, but look under the options. There are settings for the compiler and jvm that it uses. -
Installation problem with NW'04 SR1: database connection failed
Hi all,
while installing NW '04 SR1 on Windows Server 2003 SP1 and MS SQL Server 2000 SP4 I ran into an error related to the database connection. While performing the step "Load Java Database content" SAPinst crashes with the message
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
The connection to the SLQ Server with e.g. the Query Analyzer is OK. I had a problem with this installation setup before (have a look at the corresponding <a href="https://forums.sdn.sap.com/thread.jspa?threadID=338638&tstart=0">thread</a> ), the JDBC drivers where missing on the installation master but after copying them in the right direction the installation went on with no problem up to this point...
Has anybody an idea what could have happened here? Is this maybe a problem connected to the one I recently had
Below I attached the sapinst.log and jload.log with more detailed messages.
sapinst.log ###########
INFO 2007-03-12 22:06:24
Working directory changed to C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST.
INFO 2007-03-12 22:06:24
Output of D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' is written to the logfile C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST/jload.java.log.
WARNING 2007-03-12 22:06:26
Execution of the command "D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'" finished with return code 1. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
12.03.2007 22:06:25 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.2007 22:06:26 com.sap.inst.jload.Jload main
SCHWERWIEGEND: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
ERROR 2007-03-12 22:06:26
CJS-20065 Execution of JLoad tool 'D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'' aborts with returncode 1. Check 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' and 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.java.log' for more information.
jload.log ###########
12.03.07 22:06 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.07 22:06 com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
Best regards,
BerndHello Kairat,
Please follow the below mentioned guide to install it.
Check all the parameters to set and run pre requisite checker before starting installation.
Keep in mind that before starting any SAP installation you should always run prerequisite checker.
https://websmp205.sap-ag.de/instguides --> SAP Netweaver -->SAP Netweaver 7.0 -- > Installations --> EHP2
Regards,
Amit Barnawal -
My app store wont let me download apps, asks me to update my payment details then says theres a problem with previous purchase and card is expired which is untrue someone help me pls
This is a User to User Forum...
See Here for
Mac Apps Store Customer Service
http://www.apple.com/support/mac/app-store/contact.html?form=account
iTunes Customer Service Contact
http://www.apple.com/support/itunes/contact.html -
Problem with item and/or data during page-processing-PS/SQL
Greetings!
On my page I have a custom report (from 2 tables) and a small form-field, that adds and edits data in the report. After generating the form with the wizard I added an extra item, to store the id from one of the tables from the report data.
Now, on submit a calculation should take place, that updates data according user input with a procedure in Page-Prosseses:
declare a number;
begin
case :PLATZ
when 1 then a:=100;
when 2 then a:= 50;
else a:=25;
end case;
update TBL_MITGLIEDER set TURNIERPUNKTE = TURNIERPUNKTE + a
where ID_MITGL = :P14_ID_MITGL;
end;
:PLATZ is user selected (1,2,3), :P14_ID_MITGL stores the reference to TBL_MITGLIEDER (and shows the change, when I select another record)
As I understand, that process should also run, when I submit a chance, but nothing happens then.
But when I try to save a new record (which worked without any problems before adding that process), I get this error message:
ORA-06550: line 1, column 64: PL/SQL: ORA-00957: duplicate column name ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
Error Unable to process row of table TBL_TURNIERSIEGER.
Then, when I go back into the app-builder and try to run the page again, I get this message:
ORA-01403: no data found
Error Unable to fetch row.
I am not sure, if you guys have all the information you need, to know whats going on. Maybe this has to do with session-id and the whay, items are updated. I hope you can help me.
Thanks, best regards,
tobiFirst can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook] -
Problem with Gnome3 and/or graphics card Nvidia 8600M GT
Feb 22 07:40:21 localhost dbus[712]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Feb 22 07:50:30 localhost kernel: [ 679.031379] gnome-shell[1277]: segfault at 10 ip 00007f3bbd305c0f sp 00007f3b84ff86d8 error 6 in libnvidia-tls.so.295.20[7f3bbd305000+3000]
Feb 22 07:50:31 localhost gnome-session[888]: WARNING: Application 'gnome-shell.desktop' killed by signal
Feb 22 07:50:35 localhost kernel: [ 683.420948] gnome-shell[1300]: segfault at 10 ip 00007f43bc84dc0f sp 00007f43877fd6d8 error 6 in libnvidia-tls.so.295.20[7f43bc84d000+3000]
Feb 22 07:50:35 localhost gnome-session[888]: WARNING: Application 'gnome-shell.desktop' killed by signal
Feb 22 07:50:35 localhost gnome-session[888]: WARNING: App 'gnome-shell.desktop' respawning too quickly
Feb 22 06:52:39 localhost rtkit-daemon[1004]: Successfully made thread 1420 of process 1420 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Feb 22 07:52:39 localhost goa[1441]: goa-daemon version 3.2.1 starting [main.c:112, main()]
Feb 22 07:58:22 localhost kernel: [ 1150.316794] CE: hpet increased min_delta_ns to 20113 nsec
Hi,
Here is my /var/log/messages.log output.
Since several days my computer repeatedly restarts programs that require at least a bit memory, such as firefox ('segmentation fault'), skype, virtualbox, generaly gnome 3 environment. Sometimes it happens that the system hangs and I can't do nothing, although I can hear that hard disk is working - at that moment only hard reset helps.
I know that the Dell Inspiron laptops (1720) have problems with Nvidia 8600M GT (the cold solder). Is it like that this time? Or maybe something wrong with the memory, CPU (Core Duo) cache memory?
I will be happy to add any additional information.
Regards,
LukaszDid you update the nividia driver recently?
there are some threads on this -
I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
Pls inform me how can i resolve the problem of wifi.You have to go to autherized iPhone agent.
Maybe you are looking for
-
Microsoft 2010 exchange not updating my calendar and contacts
I use Microsoft Office 2010 (exchange server) for my email, calendar and contacts. My email on both my iPhone (4) and iPad (4) works fine. However after a software update a few months ago, my calendar no longer updated on either my iphone or ipad. Th
-
Calling an Oracle Report from a database trigger
At the moment I have an Oracle form with a timer checking a table for new orders. when the form finds new orders an oracle report is run from the form (sending it to the printer directly) with the run_product procedure with parameters being passed al
-
Overview of all GOS-elements for an Object
Hi, is there any FM or class to find all GOS elements for an Object f. Ex. EQUI or BUS2080? thanks for Help. Regards, Dieter
-
Macbook multi-touch functionality with LION OSX
I know that some of the older MacBooks (2006-07) have multi-touch trackpad. Are some of those models only one or two finger touch? I am wanting to upgrade to Lion OSX and want to make sure the trackpad will support three and four finger gestures. And
-
Hello, I've just received my newly purchased x230 thinkpad, I've connected it to the power, and booted up.. At first some weird unclear screen, and then disappeared.. If I touched the screen a bit, moved it back and up, sometimes a quick bizarre scre