Problem with registering Captivate Quiz score in LMS

We are using Integrity e-Learning’s WBT manager for our
LMS. We have been using Captivate (SWF files) for several months to
show simulations for software. Generally we are quite happy with
the software.
We have been able to easily create a quiz (a Captivate
generated SWF file) and access it through the LMS (using a HTML
frameset), unfortunately we are having trouble passing the
numerical score the quiz generates to the LMS.
When a student takes a Captivate Quiz (bound into a SWF
file), the final score displays on the final frame of the SWF file,
but is not getting passed to the LMS. All the other data seems to
be fine. So far we are only viewing status using the Lesson
Progress Report, which indicates “no score (n/a)”. In
this case we are embedding the SWF file into a HTML page contained
in a frameset.
We have been able to get a score successfully passed to the
LMS if we link directly to the .swf file, bypassing HTML
altogether, unfortunately we also get a warning about using Flash
Player and multiple warnings about downloading the
“aicc_int.asp” file.
I have read through:
“Output Options in Captivate” by Andrew Chemey
(Parts 1, 2, 3, and 4)
“Exploring Quizzing in Macromedia Captivate” by
Mark Fletcher
“Integrating Captivate-Generated Learning Objects into
WBT Manager, Part 1 and 2” by Carol Fallon
Has anyone had this problem and solved it?
TPK

Please contact me at [email protected] I have many
examples of Captivate passing scores sucessfully back to WBT
Manager. So hopefully I can help you figure out what is going on.
Carol Fallon
Integrity eLearning

Similar Messages

Can you submit a User Variable instead of the Captivate Quiz Score variable to an LMS?

I am attempting to create two quizzes in a course that has branching. I know that Captivate only allows for one quiz if you are using Question type slides, but I am using a simulation to check the knowledge of a process. I want to report one of the simulation completions depending on which branch the user goes to (different branches for different products). How or is it even possible to submit user variables in place of the Captivate Quiz Score variable, the time in the course variable, and the Pass or Fail status to an LMS?

Sadly, I am using Captivate 5.5. I was thinking it should be possible to use Javascript to be able to take a specific variable and submit it to the LMS in place of Captivate's Quiz variables. I just don't know Javascript well enough to know how to do that.

TS1646 hello I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossary

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Problems with getting captivate 5.5 to report completion with Internet Explorer?

Hi guys. I've been trying to get my head around this issue for quite a while now. We´ve created a pretty standard course for one of our clients, around 40 slides with some video and a quiz. We just want to check Complete/Incomplete measuring slide view completion. All reporting is as expected using browsers like Firefox or Chrome . But using Internet Explorer 8 or 9, the course reports Incomplete even with all slides visited. This occurs in both of the LMS-systems that I have access to. Has anyone else had similar problems with CP 5.5 and Internet Explorer, or does anyone have any suggestions on possible solutions?
Kind regards
/Jonas

I'm wondering if your issue is perhaps due to IE going into Quirks Mode because of the way the standard Captivate SCORM HTM templates are coded.
One thing IE does not like is having any comments outside the HTML tags at the top of a page. This is something that the Adobe Captivate templates have by default.
Take one of your published test mdoules, open up the HTM file in a text editor and remove this text at the top of the page:


Then try running this again to see if you get better results in your LMS.
If that doesn't work, try using the Pipwerks modified templates for Adobe Captivate. They are much better quality and have removed a lot of bugs that foul up some LMSs.
There's a series of articles on his blog about the changes: http://pipwerks.com/2012/01/11/cleaning-up-adobe-captivates-scorm-publishing-template-part -1-introduction/
You can find the links to download and install his version of the templates on this page: http://pipwerks.com/2012/01/25/cleaning-up-adobe-captivate%e2%80%99s-scorm-publishing-temp late-part-7-giving-the-revisions-a-home/
You need to back up your old templates before changing over to Phil's new versions (there are separate templates for SCORM 1.2 and 2004) but I recommend you at least give them a try.

EPrint problems with registering and trying to sign in

I have a HP Photosmart 6510 printer. I have installed the disk that came with it onto my desktop and also my laptop. I also installed the apps that were recommended on my iPad3 and iPhone4S. I believe that I have done everything correctly and I registered my printer with HP and open an account with ePrint. Here lies the problem, when I try to sign into ePrint it will not do anything. I have tried clicking on the sign in button on all 4 units and nothing. So now I go to the internet and try using the HP web site to get to ePrint which I can. I try to sign in there and I get an error message telling me that my password is incorrect. It tells me to enter my correct password or if I have forgotten my password to click here and it will send password to email that was used to open account. So I try to have password sent. When I enter my email address and hit submit it tells me to use the email address that was used to set up account. I have checked over and over again and the email address is correct. I can sign into my HP account without a problem, I can't get into ePrint. So I figure I will try as if I did not have an account in ePrint. I enter my name, email address and password and it tells me that the email address is not available as it is in use, no kidding, it is mine, but it will not permit me to sign in. It seems like there is a problem with the software for this program. Any ideas. I really like the print jobs that come off this printer. I have no problem printing within my home, but when I go out, that is where the problems start. I was able to send a picture to printer and I received an email telling me to go to ePrint to check on the status, well here we go again, I can't get sign into ePrint. I can't even find on HP website where I can go to get help. Please help

Hello rrs110,
It may be that you have a SnapFish.com account. Alot of long time customers of HP have SnapFish.com accounts and do not realize it. One of the printer software releases signed customers up automatically, and most people did not know, or forgot, because they never used it. Try going to SnapFish.com and using the forgot password link at the log in screen there. Once you have the password reset, go to ePrintCenter.com and use the SnapFish.com log in information to log in. If that does not help you may need to contact SnapFish.com directly to have them delete the account, or use a different email to register with.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Other problems with loading Captivate files into Flash AS3 project

I have a Captivate file done with Captivate 3, published to
Flash player 9 that is being loaded into Flash AS3. The captivate
is a simple recording of some mouse clicks in a browser. I am
displaying the playbar along the bottom, and its buttons all work
fine except for the progress bar, where you can drag the knob and
scrub back & forth in your presentation.
This progress bar is not working as it should. I see the
mouse cursor change to a hand, but when I click I cannot drag the
knob to control the progress bar. The other buttons in the playbar
do work (replay, pause, play, back, forward).
This is a unique problem in that it is only happening when
viewed in IE (7) when loaded into my Flash AS3 project. When viewed
in Firefox in my project, or as a standalone SWF, or as a SWF
simply embedded onto a plain HTML page, it works just fine.
Does anybody have any insight?
Another thing I notice with loading Captivate files with AS3
is the the amount of output messages it displays. Rather annoying
(unless this is a "feature" I've yet to be aware of - heh)

Hi,
I know exactly how you feel, there is simple answer; replace
Captivate for Camtasia Studio 5 at techsmith.com. The weight on
those shoulders will be gone! You'll smile more, be more
socialable. One Happy Person.
I am very happy person ;)
Kind Regards,
Boxing Boom

Installation Problems with Adobe Captivate 6 Subscription

I am running Windows 7 (64 bit). I have a subscription to Adobe Captivate 6 and successfully downloaded the files. However, when trying to install I am running into problems. I have 3 options (install with serial number, start my subscription, install trial). I have tried both the subscription and the trial. It says it needs to sign in with my Adobe ID, however the spinning wheel goes and goes for about 1 minute and finally comes back and tells me it can't sign in because either I'm not connected to the internet or my clock settings are wrong. I AM connected to the internet and my clock settings ARE correct. Help!
When I manually log into my Adobe account, I see a serial number listed with my Captivate subscription. Can I just install with that serial number? Or is there something with the Windows firewall blocking my ability to install this subscription?

Hi LReagan6Sigma,
Please try the solutions below :
Solution 1: Clean up cached user login information.
    Close the Creative Cloud application.
    Navigate to the OOBE folder.
    Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
    Delete the opm.db file.
    Launch Creative Cloud.
Solution 2: Reset the Hosts file.
    Choose Start > Run, type %systemroot% \system32\drivers\etc, and then press Enter.
    Right-click the hosts file and select Open. Select Notepad for the application to open the hosts file.
    Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
    Search the hosts file for entries that reference Adobe (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
    Save and close the file.
Let me know how it goes.
Thank you.
Arnaud.

Problem with registering iPhone 5 in Support Profile

Basically I got an iPhone 5 from my friend and trying to register it in my own Apple Support Profile but receiving the following msg:
According to our records, this serial number is registered to another Apple ID. If you have more than one Apple ID, log in to My Support Profile with that Apple ID to see your other registered products. Not sure if you have another Apple ID? Find out.
Yes, I have asked my friend to unregister the iPhone from his Apple Support Profile so that I can add in mine. He's done the same and it's been 12 hours but still I cannot add it. I am not sure whether I should wait a day or two before attempting again. Please Help!

I had the same problem for register, but i actually buy my iphone5s from one shop. The phone should be very new and i could use icloud webside to check this iphone5s. How could be unsuccessful for the register from My Support Profile?

[RMAN] problem with registering database

Hello, we have RAC environment on two nodes. We created rman catalog database and then registered our database with REGISTER DATABASE command. After that we issued command SHOW ALL and encountered an error:
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 21 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
could not read file header for datafile 74 error reason 4
could not read file header for datafile 74 error reason 4
could not read file header for datafile 74 error reason 4
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/10.2.0/db_1/dbs/snapcf_easy1.f'; # default
this is new catalog database, which is to replace the old one
how to deal with this problem ?

So you are following up on datafile 74 in this other thread :
problem with datafile recovery
Hemant K Chitale

Problem with registering Photoshop elements 13

Hello,
it would be great if somebody could help with the following.
I have problems with regstering Photoshop elements 13.
The problem is described in Anmeldungs-, Aktivierungs- oder Verbindungsfehler | CC, CS6, CS5.5
I tried with all 4 offered troubleshootinh steps and found no issues -> I can access http://www.adobe.com, https://www.adobe.com and https://lm.licenses.adobe.com, firewall is switched off, time is correctly set and global sign root CA is installed in my trusted root store ...I still I cannot access adobe's registration server and complete registration.
Interestingly the following web page is offline: www.adobe.com/go/getactivated_de
Any ideas what could be the problem?
Is the registration service offline for German customers?
Am i missing something?
Thanks!
Kind Regards,
Stephan

After unzipping Photoshop Elements 13, I received a error message saying
that PSE had detected an impending shutdown of my computer, and that I
should shutdown and restart the computer. I had two button choices:
ignore or quit. Given those choices, I quit, then shutdown the computer
and restarted. I again unzipped PSE and attempted an install. This time I
got a error message saying an installer was already running and I should
shut it down. Having no clue as to how to shut down an installer, I
attempted (FOR 6 HOURS) to obtain assistance from Adobe technical support
and either waited for a return call, waited on hold, attempted to
communicate with someone who I could not understand from India, or was told
technical support was not available on the phone for PSE. I finally gave
up and went to Chat. There, attempting to explain what the problem was,
(see above), I guess I took too long to respond, the chatter closed the
chat, and I was not able to reconnect to chat. After 5 attempts were
denied, I contacted a friend who has computer operations experience. After
an hour of attempting various things, he told me to hit "ignore". PSE
installed correctly and I'm now using it. This was an extremely shoddy
performance by Adobe -- first a glitch in the install process, and then no
help from tech support.
On Thu, Nov 6, 2014 at 4:00 PM, Jeff A Wright <[email protected]>

Generate Report Troubles with Adobe Captivate Quiz Results Analyzer

I'm new to Captivate 5 and am trying to utilize the Adobe Captivate Quiz Results Analyzer.
I've enabled report for my project to Acrobat.com and configured as instructed in the online help. The Post Result button appears on the Summary page and appears to work for the two colleagues taking the quiz. But when I click the Generate Report button in Adobe Captivate Quiz Results Analyzer, I get the message "Data is not present on local file system, downloading course data," but nothing occurs - no course data appears from the colleagues who are helping me test the quiz.
I'm able to sign in to the Quiz Results Analyzer and it does display the organization, department and course name, but no course data (see image below).
What am I doing incorrectly that keeps this from generating a course report?
Any help will be deeply appreciated.

Vish,
Your solution worked at first. I went in, took the course, and then went into Analyzer and was able to Generate Report and look at my stats. However, I had a colleague take the course. She did and posted the results and received a "successful" posting message. Then, I went back into Analyzer and clicked the Generate Report button to see how the system worked when there was new learner data. A "Checking for new data" played for a half hour before I finally gave up.
I know that you were able to reproduce this issue where in clicking the Generate Report a second time brings up the loading animation that stays forever and that you were investigating the issue, but I thought I should post here just in case anyone else has a solution.
Thanks,
Jeff

Problem with end-of-Quiz feedback...Captivate 5.5

I've created a short course with a quiz. At the end of the quiz, i would like to have the learner go to one of two slides (one for pass - the other for fail). From the "pass" slide, I would like them to click a button where a PDF certificate will open. The "fail" slide will let the user review the content of the course.
Currently, my file will show the "pass" slide, but will advance to other slides when the button is clicked to print the certificate.
Thus far, the "fail" actions are acting as expected.
Can anyone give me suggestions of how I can fix my file?

Select the slides you want to hide in the Filmstrip, use the right-click menu to hide them. But it is not possible to show a slide by an advanced action, here I do not know what is meant at all? You can skip a slide using a statement Jump to, but a hidden slide will simply not been included in the published version, no way to get it back once the SWF (or other output) is created.
Another remark: be very careful with actions executed 'On exit' because they will only be done if the last frame of the slide is also reached. That is not always the case, if you have an interactive object that has Success/failure actions to go to another slide the last frames after the pausing point of that object will never be visited and the On exit action not be executed.
Lilybiri

Problem with registering Parser - Recompiled source code, don't see any changes

I had created a parser. I had register this parser with Ifs Manager. I had execute this following statement to see if been registered carefully:
On user ifssys/ifssys
sql)select name,stringvalue,bundle from odmv_property where name= 'p01';
I see my parser....
select name from odmv_propertybundle where id=1139;
ParserLookupByFileExtension
All it's ok. I upload a file with a 'p01' extension with option 'parser' on my Internet Explorer. All work fine.. My parser work. But I need to do some changes in my code. I update my code, recompile my code. My class file have been updated. After my parser (.class) file have been updated I upload a new file with parse option. I don't see any change I do in my code. Why??? How I can update my parser to view change. I have only recompile my code an place my new class files on the same directory. I have try again (change on code, recompile, test) and I don't see any changes.
But I have test by change my classname. My classname before is Test1 and I have rename my classe by Test2. I have compiled this code and a file Test2.class have been generate. I have update my register parser with Ifs Manager to use the new classname Test2. I have chack with sql statement to see if my parser have been updated. I have been updated correctly. I have upload a new file with parse option and I see my change on my code..
Do you have some explanations about that??
How I can update my source code of a parser already registered to the parser take the change I do.
Francois
null

Ok, but they have another manner to resolve this problem. If I upload a file with parser option on Windows Nt explorer (Using SmbServer or WcpServer). How I can update the class file into the JVM? I need the restart this those server or just one? If just one which server I need to restart?
Thanks Francois
null

Problems with using Captivate 7 behind Proxy

Since I've upgraded to Adobe Captivate 7, I have issues while using Captivate. The program start takes very long and during working the program window sometimes freezes and then I have to wait about 15 Seconds before Captivate allows continuing my work, sometimes Captivate crashes completely. These issues are gone, when I'm disabling my network connection. I'm using Captivate inside a corporate network and behind firewall and proxy.
I tested it also with a direct internet connection, no problems. So I'm missing some adresses which are filtered by the proxy. Does a list with necessary connections for Adobe Captivate 7 exist?

It is well known that Captivate authors should ONLY work on project files that are stored and accessed from the computer's own hard drive. If you are pulling down project files from your network LAN or saving back up to the LAN using Captivate then you will have these issues. The use of virtual My Documents folders and roaming user profiles can also play havoc with Captivate's stability.
You need to set up working folders on your C drive for your Captivate projects. You'll need one for your Captivate Project Cache, one for your Captivate Publish folder, one for your Video Demo Recording Working Folder, and one for your Layouts and Themes. All should be on your own hard drive, not the LAN or (if your IT dept uses virtualization or roaming user profiles) in your My Documents folder.
Once your folders are created you can set these as the Default Locations in Preferences > General Settings > Default Locations and Preferences > Recording > Video Demo etc.
Since it appears as if you have been working over the network up to this point, you may also find that you need to kill your Preferences folder as well after setting up the local default locations. Otherwise Captivate will continue to look for the network addresses.

Naming Buttons - Problem with using Captivate 7 Buttons to Open URL or File

After spending too much time troubleshooting a button problem, I discovered the importance of naming each item in a Captivate project.
For some reason I have yet to figure out, publishing to SWF from Captivate causes buttons to function arbitrarily. In my case, I had eight buttons pointing to external URLs, three that worked and five that didn't. All of the buttons pointed to the same external website, only to different PDFs hosted on that site. Each button was named with the default "Button_X" convention as set by Captivate. After trying lots of different settings adjustments, On Enter and On Exit actions, and Play/Pause timings, I did what I should've done from the beginning; changed the names of the buttons.
Why this worked? I don't know. I've seen hints on other discussions as to SWFs not working well when there are a lot of unnamed or default-named items. If there's some logic to this I would be happy to know it, but for a default setting to cause such a bizarre problem is beyond my comprehension. I could understand if I had named the buttons incorrectly, but I didn't do anything to them; I left them with the names created by default.
Hopefully this helps someone else resolve a similar issue and, if anything, encourages everyone to follow best practices and use a clear file naming conventions for all projects.

Hi there
Perhaps the link below will help?
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Problem with registering Captivate Quiz score in LMS

Similar Messages

Maybe you are looking for