Problem with released transports

Hi All,
We have made changes to the existing query ( added two free charcteristics ) and collected it in a transport request.The query elements ( the free characteristics which have been added ) have both modified and active version in RSZELTDIR table.After releasing the request successfully into qualiy the changes are not getting reflected.The query elements are present only in the modified version but not active version.
We have one more similar issue.When we create a new query, include new query elements in the query and transport it to quality no entry is created for the query elements in the table RSZDELTDIR.
Could someone help me out in figuring out the problem?
Regards,
Shravani

hi,
Generally we face this error when the objects are not collected properly
check whether the query elements are collected into transport request or they are in temporary request/Package($TMP)
in your case i think they might have struck in temp request if it is so collect the query again in transport connection tab of RSA1 and check for the transport requests/package of the query elements
If they are in Temp right click on it and select change package and collect it again
Regards,
MADhu
Edited by: MadhuMarupudi on Aug 18, 2009 8:37 AM

Similar Messages

PROBLEM IN RELEASING TRANSPORT REQUEST THROUGH SE10

Dear all,
I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
Helpful contribution will be duly rewarded.
Thanks & Regards,
VICKY

hi
vicky just went through your Query regarding release
of requests..first of all U be sure of TMS configuration
see whether it is consistent or not.then after Refresh
the system and then come to release of requests.
its true that we can transport through scc1 but first
check about STMS configuration and the way you set
that.
Regards
manjula.

Problem with SPAU Transports after Upgrade and after applying SAPKW70016

Dear All,
we copied old dev to new QA, upgraded new QA, then copied new QA to new DEV.
did the SPAU adjustments in DEV. At that time DEV SAP_BW version was SAPKW70015. After that we applied SAPKW70016. Now we're having problems with the SPAU transport because of the application of SAPKW70016.
Requested to kindly suggest ASAP.
Thanks & Regards
janardhan Kumar K

Hi,
Could you please to be more specific with the error ? Please check the log e send us the message error that is happening during the transport.
Thanks,
Walter Oliveira.

Problem with file transport

Hi ,
I am transporting some of my XI 3.0 objects from XIQA to XIPROD.
When I am importing the objects in XIP I am getting numbers of problem.
1- Scenarios SOAP to RFC . when I am activating the objects it saying
Communication Channel | PRD_400 | RFC_QA3_Receiver:
Enter a value for attribute 'Application Server'
Enter a value for attribute 'System Number'
Enter a value for attribute 'Logon User'
Enter a value for attribute 'Logon Password'
Enter a value for attribute 'Logon Language'
Enter a value for attribute 'Logon Client'
Do I need to Give these values manually again as they are moved from Env to other?
2- Why my Receiver communiation channel coimg as
Communication Channel | PRD_400 | RFC_QA3_Receiver:
As this PROD env it should come PR3 in place of QA3.
I have also transport other interfaces in PROD but in that there was no such problem with Communication channel Name.
Regards

Do I need to Give these values manually again as they are moved from Env to other?
When we transport ID objects, the values stored in the channel get lost and have to be manually enetered......it happens even for DEV --> QA environment.
Now your channel should reflect PROD-related data.
2- Why my Receiver communiation channel coimg as
Communication Channel | PRD_400 | RFC_QA3_Receiver:
The channel name does not depend on the environment it is present....verify the name once again!
Regards,
Abhishek.

Problem with release statergy po

Dear Friends ,
I had maintained release statergy for PO . I had taken chraterstic "Order type" "Purchase group" "Order Value" . All configaration is fine and simulation also showing ok . But it is not triging . Is it any problem in release indicator seting . I had maitained in two level for 3types of currency . I had maintained charaterstic for for each currency type . I am unable to find the error.......what could be the cause .........
R

Hi
If you have maintained 3 chracteristics for 3 Currencies then The sytem will check if all the three currencies exits or not & then only the relase strategy will trigger.
better option is to maintain the Currency Key charcteristic with 3 Charcteristic values INR, USD, EUR.
Please check
Thanks & Regards
Kishore

Problems with query transport (missing object)

Hello,
I've a problem while transporting a query with the transport connection. I choose the option "necessary objects" but the import in the productive system fails due to a missing object.
How can I find the missing object? In the transport log only the ID is given (e.g. " Element 67ZP0WYO09DFA52PLG2SREVBT is missing in version M")
Thanks in advance,
Markus

Hi Markus,
Check data base tables RSZELTXREF & RSZELTTXT for the missing element in the transport.
Try to include all the missing elements of a Query in a new transport and try again.
Hope this will help.
Praveen

Problem with WAD transports

Hi there
We have a problem with transporting templates created in the WAD.
The transport goes through succesfully, but when I run the template(s) in PROD, the changes are not reflected.
If I open the template in the WAD in PROD, then I can see that the changed template is indeed in PROD, but executing it in the portal shows the old template.
We are seeing this problem now with templates, but noticed it about a week ago with reusable library items that weren't updating correctly in PROD. The way we resolved it on that occasion was with a server reboot (J2EE)
I am sure a Java restart will do the trick again this time, but we can't have a situation where we need to restart systems each time a transport is sent through ... that's ridiculous.
I imagine there is some sort of caching holding onto the old items, but I don't know where to look to clear that cache.
Please, can anyone provide some assistance on this?
Cheers,
Andrew

Hi Andrew,
i think that you will find the cache in 'RSRT' T Code.
and refresh will also help this problem.
If not then find the ABAP Program and regenerate it.
Hope this will solves your problem.

Problem with translation transport

hello everybody,
I have an application with two corresponding transport requests (this is because I would like to transport to different systems only part of the functionality of the app). Recently a translator made an English translation of my application which resulted in a new transport request with about 100 new objects. I would like to distribute accordingly these objects to the two old transport requests ( respectively the two parts of the app). Is there a way to do this, to find out which translation object belongs where?
Thanks

problem with translation transport
Same message here?
Regarding to the issue, perhaps giving some information would be helpful. What kind of objects are them? (Data element, message class? )
Best regards,
Matyas

Problem with the transport request

A request was released to Prod.
In D and Q the request is success but in P it shows one error..
so, we tried to create a new request and copy the objects from the old one.
but v r gettiing the objects not below the task(in req) but below the req..
so it is not possible for me to release it.
I also tried to edit the code , but when i saved it it is not asking for a new request. is it bcoz old req is released to P?

Hi,
In production system, it is showing an error in the logs while transporting : Generation of Programs and Screen and return an error code 8. there are no repositary objects to transport. this is just simple code modification. In Quality and Dev system, transportation was done successfully with out causing any problem.
So, we tried to create a new transport request by editing the code in development.however it is not asking for the new transport request number while saving or activating.
Also, we tried to create a new TR manually using SE09 and placing the modified objects under the task. but, transport request and task number are getting created at a time and while assigning the objects, the objects are under the request not under the task.the objects should be under the task only.
this is the problem what exactly we are getting. Please clarify..
Thansk!!!

Problem in Releasing/Transporting Request from Cust & Development Client

Hi,
I had made up a report and i trying to transport it into the PRD Server but the problem when i use Tcode SE09 and there i clicked on the su-request ID it got released and when i clicked on main request ID it has givne run time error. But again i execute the transaction code SE09 and tried to realease the main request ID ,it is not allowing me to do it as a Message displays :-
Task DEVK904185 has the status "Release started"
I dont know why it is happening ? I had relaesed a lot of request before but never faced a problem like that.
Please guide me how to solve this tranport problem..
Edited by: nav009 on Dec 23, 2009 7:46 AM

Hi Juan,
The error which had came during the releasing of main request id was:-
Short text
    Operating system cannot close file "\\piic071\sapmnt\trans\tmp\DEVE904185.DEV"
What happened?
    Resource bottleneck
    The current program "SAPLSLOG" had to be terminated because
    a capacity limit has been reached.
I am currently at display mode of request in which there is a tab named object in which there are 2 lines present. These are:-
1. Comment Entry : Released ; Program ID : CORR(Comment Automatic) ; Object Id: RELE(Comment Entry: Released);
     Object Name: DEVK904186 20091223 115834 ABAPER
2. Program.Program ID : R3TR(OBJECT) ; Object Type : PROG ; Object Name: ZBDC_MM01_R1ZBDC_MM01_R1
The package which we use is ZABAP which is used to transport all the creations and modifications it to the PRD Server...
Is there any way of solving this issue......

Problem with "Create Transport Request"

Hi all,
Iu2019m working with Solution Manager and Charm. I have a problem when I create a transport request.
After that I put regular correction into status u201CIn developmentu201D I choose u201CCreate Transport Requestu201D from the menu but the system display the message u201CThe last action triggered is locked in the task listu201D . Is it a problem of authorization in satellite system? The user that I use to create a transport request have sap_all profile in the satellite system. What settings do I have to use in satellite system and in solution manager?
Thank in advance
giovanni

Make sure that the profile S_TMW_IMPORT and S_TMW_CREATE has the correction authorizations assigned and that it is assigned to the user TMSADM of client 000 of your satellite system.
Note 807228 can be useful.
Hope this helps,
Roel

Problems with the transport of substitutions

Hi all.
We have developped some substitutions. We have checked that everything is alright in development environment, and then we have tried to transport to quality environment. The transport log has no errors, and the control tables have been filled with the same data in both environments.
But when you go to transaction OBBH to see the transported validation, the line of every step in the validation where the exit is specified is missing in quality environment. Any idea?
Details:
- It is a substitution of Financial Accounting / Complete Document
- The parameter type of the substitutions is C_EXIT_PARAM_CLASS
- The exits has been declared in the following way:
FORM U913 USING bool_data TYPE gb002_015.
- Generation program RGUGBR00 has been executed in both environments
Do you see anything that seems incorrect?
Thanks in advance,
Carlos

Hola Carlos,
Tengo el mismo problema que tú describes en el foro. En desarrollo me funciona bien la sustitucion y en calidad ya no.
Esto es porque la tabla GB01 está diferente en desarrollo que en calidad.
¿Tú como le hiciste para modificar en calidad la tabla GB01 para quitarle la marca al "BEXCLUDE"?
Gracias de antemano, saludos!

Problem with a transport Guided Procedures process - INVALID_LANGUAGE

Good day. I have a process created in GP. It contains many objects where Original Language is not English. Also the folders, where the process lays, have the Original Language - not English.
When we try to create a request we get an error: Cannot export transport request;
com.sap.caf.eu.gp.base.exception.EngineException: Function module
EUP_TSP_EXPORT produced ABAP exception at SAP system: INVALID_LANGUAGE
How we can fix it?
Also we tried to create a dummy folder with the Original Language - English and there weren't any troubles. So the problem in the Original Language... If we only could to change it for the existing objects, but the field is disabled. May be there is some workaround to change a language for the existing objects?

Hi Kirill,
As a workaround you can export this process in .sda file and than deploy it on the backend system.
Regards,
Yordan

ManagedAvailability problem with Mailbox Transport Submission after CU6

We are getting the following error after CU6 implementation:
Seems like a latency issue... But, all tests are succesful, we are not experience any harm/issue. So, can we consider it as "by design" or should we take action?
Mailbox Transport Submission - the verification that the probe messages were successfully submitted within 5 minutes to HUB has failed.
This could indicate that the mailbox submissions are taking too long or not progressing at all.
SequenceNumber: 635484312145508431
Error: MapiSubmitLAMProbe finished with CheckPreviousMail failure.
FailureContext: MapiSubmitLAMProbe finished with CheckPreviousMail failure.
ExecutionContext: MapiSubmitLAMProbe started. This performs - 1. Submits a new message to Store 2. Checks results from previous Send Mail operation. Sequence # = 635484312145508431. First Run? = False. Previous mail submission to store was successful. Results
- # of previous results: 0. Could Not Find stages that ran. Previous SendMail failure - Mail submitted to Store during the previous run never reached SendAsCheck.
This may indicate a latency from Store to Submission Service. Investigating. Found lower SA latency. Indicates an issue in Submission service.

Using the message tracking logs, i found that my single exchange server tries to be high available and therefore wants to copy the mail to be transported to a different server before it transports it.As it can not find a suitable server to backup to, *THIS
BACKUP ONLY STEP* failes. The transport will be done nevertheless, without problems.
Get-MessageTrackingLog -Server MyServer -messageid [email protected] | ft Timestamp, EventID
Timestamp EventId
11.04.2015 01:51:36 DELIVER
11.04.2015 01:51:36 RECEIVE
11.04.2015 01:51:36 SUBMIT
11.04.2015 01:51:36 --> HAREDIRECTFAIL <--
11.04.2015 01:51:36 RECEIVE
11.04.2015 01:51:36 AGENTINFO
11.04.2015 01:51:36 SEND

Problem with infoarea transport

Hi,
One cube and an ods were removed from an infoarea and assigned to a new infoarea in dev system.
1. While collecting the infoarea in transport, is it mandatory to collect the cube and ods, their update rules etc?We have not made any changes to these objects.These objects have got millions of records and I really dont want to create problems in production by transporting the cube and ods, update rules again.
2. Is there any way where we can send only the infoarea and just the NAMES of the cube and ods so that they get linked to the infoarea in production.
Thanks in advance .
Regards,
Mani.

Hi,
Nothing goes wrong with data ,if we transport the Cubes and ODS into production one more imte.
Any way , you can take Info area in to tranport connector tool, and then remove tick mark for all data targets under that infoarea,if system makes any tick mark .But donot forget to make a tick mark for Infoarea,if system does not collect it.
With rgds,
Anil kumar Sharma .P

Problem with released transports

Similar Messages

Maybe you are looking for