Problem with REMOTE_LOGIN_PASSWORDFILE ?
Dear Friends ,
I am little bit confused the below matter of "REMOTE_LOGIN_PASSWORDFILE" . From Oracle8 Administrator's Guide (Release 8.0 ; A58397-01) ,
I got the following statement when :
code:
Remote_login_password file is EXCLUSIVE then ,
" An Exclusive password file can be used with only one database . Only an EXCLUSIVE file can contain the names of users oter than SYS and INTERNAL . Using an EXCLUSIVE password file allows you to grant SYSDBA and SYSOPER system privileges to individual users and have them connect as themselves. "
Now I have the following questions about the statement :
1) "An Exclusive password file can be used with only one database" , is it One database or used only for an INSTANCE ?
2) "Only an EXCLUSIVE file can contain the names of users oter than SYS and INTERNAL ." that means , when I use EXCLUSIVE , then all users of the database (with SYS ) passwords are stored in PASSWORD File , is it ?
And If I set it SHARED , then password file does not carry all user's password ? , then it just contain the SYS password . Plz explain ....
3) "Using an EXCLUSIVE password file allows you to grant SYSDBA and SYSOPER system privileges to individual users" what does it mean ? In EXCLUSIVE mode I can give the SYSDBA privilege to all normal users of the database ?
If It is SHARED , then I cannot give this privileges to normal user . is this correct ?
Plz inform me .... ....
Thx in Advance .
Thx Friend for your Document .
But still I have a confusion ,
> 1) From Document , I get ,
> When REMOTE_LOGIN_ PASSWORDFILE=Shared , then
SHARED: A SHARED password file can be used by multiple databases running on the same server. However, the >only user recognized by a SHARED password file is SYS. You cannot add users to a SHARED password file. All users >needing SYSDBA or SYSOPER system privileges must connect using the same name, SYS, and password. This >option is useful if you have a single DBA administering multiple databases.Would you plz tell me , How can I share a password file for multiple database . Because I know every database has its own password file ?
2) About ENTRIES of the passwd file , I got :>This parameter specifies the number of entries that you require the password file to accept. This number >corresponds to the number of distinct users allowed to connect to the database as SYSDBA or SYSOPER. The >actual number of allowable entries can be higher than the number of users, because the ORAPWD utility continues >to assign password entries until an operating system block is filled. For example, if your operating system block size >is 512 bytes, it holds four password entries. The number of password entries allocated is always a multiple of four.
Here , what the meaning of Entries ? Does it refers Number of users or Number of Blocks as entriy . And If I set with password file "Entries=2" then how can I check this that it is working ?
Last Question ,
From an existing password File which is created using DBCA , How can I find the Number of Entries used in that >file ? Is there any query or tools to read the passwrod file ?Plz inform and also Sorry for disturb .. ...
Edited by: shipon_97 on Nov 4, 2009 12:18 PM
Similar Messages
-
I have one problem with Data Guard. My archive log files are not applied.
I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap -
Resolving problem with ORA-01031: insufficient privileges
hello i just to write a few word about my installation of oracle database 9i
My installation is on a Red Hat AS3
I have a problem with the error :ORA-01031: insufficient privileges
The one who read this know what about i tell.
The authorization is only for the user which Group is DBA as you can read everywhere.
but me when i tried groupadd dba => it tells group already exist.
but i can't find the group dba in the file /etc/group.
So i tried to make my user 'oracle' works with the 'already group exist' dba .
useradd -g dba oracle
but when i tried to start the database i create i have the message. : ORA-01031: insufficient privileges
i tried to add manualy the group dba to /etc/group (as i can read in websites)
and add a user manualy (/etc/passwd).
But does works.
I try all i can during 1 days long.
I was really upset because nothing that i read work.
finaly I go to the RedHat Menu (things i don't really do normaly on LINUX) and go to 'SYSTEM SETTINGS' and choose 'User and Group'
Here i can see my user 'Oracle' I get the property of the user .
there is a tab group ( 'select the group that the user will be member of:')
None of them where name DBA so i decidied to select all of them and tried.
MAGIC!!! then it works!!!
ps: after when i see the list of the group I saw that one of them is named 'SYS' . I really think that it is the one group i had to select. but don't know.
Now It is working for me so... And good luck for you. bye.Errors
ORA-01031 "insufficient privileges"
Symptoms
During database upgrade phase using DBUA , it fails with error
ORA-1031 Insufficient privileges
Connection from sqlplus also fails with same error
$ sqlplus /nolog
SQLPLUS "conn / as sysdba"
ORA-1031 Insufficient privileges
Changing the REMOTE_LOGIN_PASSWORDFILE to SHARED / NONE does not make differen
Cause
ORACLE_HOME owner oramigts is part of OS group "dba" ,but config.s shows group "g680"
The 'OSDBA' and 'OSOPER' groups are chosen at installation time and usually both default to the group 'dba'.
These groups are compiled into the 'oracle' executable and so are the same for all databases running from a given ORACLE_HOME directory.
The actual groups being used for OSDBA and OSOPER can be checked thus:
cd $ORACLE_HOME/rdbms/lib
cat config.[cs]
Solution
To implement the solution, please execute the following steps:
1. Checked the ORACLE_HOME owner.
echo $ORACLE_HOME
/h02/app/oracle/product/9.2.0_64
cd / h02/app/oracle/product/
ls -l
drwxr-xr-x 58 oramigts dba 1024 Jan 2 2004 9.2.0_64
2.ORACLE_HOME software owner "oramigts" is part of group "dba"
3.Checked file $ORACLE_HOME/rdbms/lib/config.s
[If your platform has config.c:
Due to the way different compilers under different architectures generate
assembler code, it's not possible to give a universal rule.]
It shows dba group as "g680" where software owner is part of "dba" group
You can more find detail on config.s / config.c in the following doc.
Note 50507.1 SYSDBA and SYSOPER Privileges in Oracle
4. Modified the config.s for correct group.
.ascii "g680\0"
to
.ascii "dba\0"
7. mv config.o config.o.bak
8. make -f ins_rdbms.mk config.o ioracle
9. Checked the file config.o is created at $ORACLE_HOME/rdbms/lib
10. Connected / as sysdba thru Sqlplus from 9.2 Home, which connected sucessfully. -
Problem with dataguard on 10g peace of !"·$%&/
Hello everyone
I have problems with the dataguard, when i switchover to physical standby the error ora-16775 the dmgrl log says:
0 2 0 ORA-16775 Error: the target standby database has some redo log(s) missing. Cannot proceed with the switchover operation
I have made i think all the solutions around here to send or activate the redo log transport, this happend to me because disable the log_archive_dest_state on physical standby, so y make a cold backup of the primary database and set this to standby with the commands:
SQL> STARTUP NOMOUNT;
SQL> ALTER DATABASE MOUNT STANDBY DATABASE;
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
I attach the orcla.ora and orclb.ora to this question:
ORCLA: (primary)
orcla.__db_cache_size=868220928
orcla.__java_pool_size=16777216
orcla.__large_pool_size=16777216
orcla.__shared_pool_size=163577856
orcla.__streams_pool_size=0
*.archive_lag_target=0
*.audit_file_dest='c:\oracle\product\10.2.0/admin/orcla/adump'
*.background_dump_dest='c:\oracle\product\10.2.0/admin/orcla/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCLA\CONTROL01.CTL','C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCLA\CONTROL02.CTL','C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCLA\CONTROL03.CTL'#Restore Controlfile
*.core_dump_dest='c:\oracle\product\10.2.0/admin/orcla/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='ORCLA'
*.db_recovery_file_dest='c:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.DB_UNIQUE_NAME='ORCLA'
*.dg_broker_start=TRUE
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orclaXDB)'
*.fal_client='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=SRV-LOGMEC-001)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCLA_XPT)(INSTANCE_NAME=ORCLSID)(SERVER=dedicated)))'
*.fal_server='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=SRV-LOGMEC-002)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCLB_XPT)(SERVER=dedicated)))'
*.instance_name='ORCLSID'
*.job_queue_processes=10
*.log_archive_config='dg_config=(ORCLB)'
*.log_archive_dest_1='LOCATION=D:\oradata\archivelogs\orcla VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=ORCLA'
orcla.log_archive_dest_1='location="D:\oradata\archivelogs\orcla"','valid_for=(ONLINE_LOGFILE,ALL_ROLES)'
*.log_archive_dest_2='service="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=SRV-LOGMEC-002)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCLB_XPT)(INSTANCE_NAME=ORCLSID)(SERVER=dedicated)))"',' LGWR ASYNC NOAFFIRM delay=0 OPTIONAL max_failure=0 max_connections=1 reopen=300 db_unique_name="ORCLB" register net_timeout=180 valid_for=(online_logfile,primary_role)'
*.log_archive_dest_state_1='ENABLE'
orcla.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_format='DBSID_%t_%s_%r.arc'
orcla.log_archive_format='DBSID_%t_%s_%r.arc'
*.log_archive_max_processes=2
*.log_archive_min_succeed_dest=1
orcla.log_archive_trace=0
*.log_checkpoint_interval=10000
*.log_checkpoint_timeout=1800
*.open_cursors=3000
*.optimizer_mode='RULE'
*.pga_aggregate_target=16777216
*.processes=400
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_max_size=1073741824
*.sga_target=1073741824
orcla.standby_archive_dest=''
*.standby_file_management='auto'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='c:\oracle\product\10.2.0/admin/orcla/udump'
ORCLB: (standby)
orclb.__db_cache_size=868220928
orclb.__java_pool_size=16777216
orclb.__large_pool_size=16777216
orclb.__shared_pool_size=163577856
orclb.__streams_pool_size=0
*.aq_tm_processes=0
*.archive_lag_target=0
*.audit_file_dest='c:\oracle\product\10.2.0/admin/orclb/adump'
*.background_dump_dest='c:\oracle\product\10.2.0/admin/orclb/bdump'
*.compatible='10.2.0.1.0'
*.control_files='c:\oracle\product\10.2.0/oradata/orclb/\stand.ctl'
*.core_dump_dest='c:\oracle\product\10.2.0/admin/orclb/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='ORCLA'
*.db_recovery_file_dest='c:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.DB_UNIQUE_NAME='ORCLB'
*.dg_broker_start=TRUE
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orclaXDB)'
*.fal_client='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=SRV-LOGMEC-002)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCLB_XPT)(INSTANCE_NAME=ORCLSID)(SERVER=dedicated)))'
*.fal_server='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=SRV-LOGMEC-001)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCLA_XPT)(SERVER=dedicated)))'
*.instance_name='ORCLSID'
*.job_queue_processes=10
*.log_archive_config='dg_config=(ORCLA)'
*.log_archive_dest_1='LOCATION=C:\oracle\product\10.2.0\oradata\orclb VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=ORCLB'
orclb.log_archive_dest_1='location="C:\oracle\product\10.2.0\oradata\orclb"','valid_for=(ALL_LOGFILES,ALL_ROLES)'
*.log_archive_dest_2=''
orclb.log_archive_dest_2='location="D:\oradata\archivelogs\orclb"','valid_for=(STANDBY_LOGFILE,STANDBY_ROLE)'
*.log_archive_dest_state_1='ENABLE'
orclb.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
orclb.log_archive_dest_state_2='ENABLE'
*.log_archive_format='DBSID_%t_%s_%r.arc'
orclb.log_archive_format='DBSID_%t_%s_%r.arc'
*.log_archive_max_processes=2
*.log_archive_min_succeed_dest=1
*.log_archive_trace=0
orclb.log_archive_trace=0
*.log_checkpoint_interval=10000
*.log_checkpoint_timeout=1800
*.open_cursors=3000
*.optimizer_mode='RULE'
*.pga_aggregate_target=16777216
*.processes=400
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_max_size=1073741824
*.sga_target=1073741824
orclb.standby_archive_dest='D:\oradata\archivelogs\orclb'
*.standby_file_management='auto'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='c:\oracle\product\10.2.0/admin/orclb/udump'
DGMGRL (primary)
DG 2009-11-11-22:05:17 0 2 702684180 DMON: CTL_ENABLE of ORCLB
DG 2009-11-11-22:05:17 0 2 702684180 requires reset of LOG XPT Engine
DG 2009-11-11-22:05:17 0 2 702684180 on Site ORCLA
DG 2009-11-11-22:05:17 0 2 0 Reset Log Transport Resource: SetState ONLINE, phase BUILD-UP, External Cond ENABLE
DG 2009-11-11-22:05:17 0 2 0 Set log transport destination: SetState ONLINE, phase BUILD-UP, External Cond ENABLE
DG 2009-11-11-22:05:17 0 2 0 Executing SQL [alter system set log_archive_dest_2 = 'service="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=SRV-LOGMEC-002)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCLB_XPT)(INSTANCE_NAME=ORCLSID)(SERVER=dedicated)))"', ' LGWR ASYNC NOAFFIRM delay=0 OPTIONAL max_failure=0 max_connections=1 reopen=300 db_unique_name="ORCLB" register net_timeout=180 valid_for=(online_logfile,primary_role)']
DG 2009-11-11-22:05:17 0 2 0 SQL [alter system set log_archive_dest_2 = 'service="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=SRV-LOGMEC-002)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCLB_XPT)(INSTANCE_NAME=ORCLSID)(SERVER=dedicated)))"', ' LGWR ASYNC NOAFFIRM delay=0 OPTIONAL max_failure=0 max_connections=1 reopen=300 db_unique_name="ORCLB" register net_timeout=180 valid_for=(online_logfile,primary_role)'] Executed successfully
DG 2009-11-11-22:05:17 0 2 0 Executing SQL [alter system set log_archive_dest_state_2 = 'ENABLE']
DG 2009-11-11-22:05:17 0 2 0 SQL [alter system set log_archive_dest_state_2 = 'ENABLE'] Executed successfully
DG 2009-11-11-22:05:17 0 2 0 Executing SQL [ALTER SYSTEM SWITCH ALL LOGFILE]
DG 2009-11-11-22:05:22 0 2 0 SQL [ALTER SYSTEM SWITCH ALL LOGFILE] Executed successfully
DG 2009-11-11-22:05:22 0 2 0 DMON: site 01001000, instance 00000001 queuing healthcheck lock request
DG 2009-11-11-22:05:22 0 2 0 DMON: Releasing healthcheck master lock
DG 2009-11-11-22:05:22 0 2 0 DMON: Health check master lock conversion successful
DG 2009-11-11-22:05:22 0 2 0 DMON: a process acquired the healthcheck master lock
DG 2009-11-11-22:05:22 0 2 702684180 DMON: status from rfi_post_instances() for ENABLE = ORA-00000
DG 2009-11-11-22:05:22 0 2 0 INSV: Received message for inter-instance publication
DG 2009-11-11-22:05:22 0 2 702684180 DMON: ENABLE Complete, Object ORCLB
DG 2009-11-11-22:05:22 0 2 0 req_id 2.1.702684180, opcode CTL_ENABLE, phase END, flags 5
DG 2009-11-11-22:05:22 0 2 702684180 enabled in State STANDBY
DG 2009-11-11-22:05:22 0 2 702684180 rfm_inst_phase_dispatch 16 END phase processing
DG 2009-11-11-22:05:22 0 2 0 INSV: All instances have replied for message
DG 2009-11-11-22:05:22 0 2 0 req_id 2.1.702684180, opcode CTL_ENABLE, phase END
DG 2009-11-11-22:05:22 0 2 702684180 DMON: CTL_ENABLE operation completed
DG 2009-11-11-22:05:22 0 2 702684180 DMON: Entered rfm_release_chief_lock for CTL_ENABLE
DGMGRL (standby)
SCOPE=SPFILE sid='orclb']
DG 2009-11-11-22:04:06 0 2 0 SQL [ALTER SYSTEM SET log_archive_format='DBSID_%t_%s_%r.arc' SCOPE=SPFILE sid='orclb'] Executed successfully
DG 2009-11-11-22:04:07 0 2 0 Setting init.ora parameter with SQL [ALTER SYSTEM SET standby_file_management='AUTO' SCOPE=BOTH sid='*']
DG 2009-11-11-22:04:07 0 2 0 Executing SQL [ALTER SYSTEM SET standby_file_management='AUTO' SCOPE=BOTH sid='*']
DG 2009-11-11-22:04:07 0 2 0 SQL [ALTER SYSTEM SET standby_file_management='AUTO' SCOPE=BOTH sid='*'] Executed successfully
DG 2009-11-11-22:04:07 0 2 0 Setting init.ora parameter with SQL [ALTER SYSTEM SET archive_lag_target=0 SCOPE=BOTH sid='*']
DG 2009-11-11-22:04:07 0 2 0 Executing SQL [ALTER SYSTEM SET archive_lag_target=0 SCOPE=BOTH sid='*']
DG 2009-11-11-22:04:07 0 2 0 SQL [ALTER SYSTEM SET archive_lag_target=0 SCOPE=BOTH sid='*'] Executed successfully
DG 2009-11-11-22:04:07 0 2 0 Setting init.ora parameter with SQL [ALTER SYSTEM SET log_archive_max_processes=2 SCOPE=BOTH sid='*']
DG 2009-11-11-22:04:07 0 2 0 Executing SQL [ALTER SYSTEM SET log_archive_max_processes=2 SCOPE=BOTH sid='*']
DG 2009-11-11-22:04:07 0 2 0 SQL [ALTER SYSTEM SET log_archive_max_processes=2 SCOPE=BOTH sid='*'] Executed successfully
DG 2009-11-11-22:04:07 0 2 0 Setting init.ora parameter with SQL [ALTER SYSTEM SET log_archive_min_succeed_dest=1 SCOPE=BOTH sid='*']
DG 2009-11-11-22:04:07 0 2 0 Executing SQL [ALTER SYSTEM SET log_archive_min_succeed_dest=1 SCOPE=BOTH sid='*']
DG 2009-11-11-22:04:07 0 2 0 SQL [ALTER SYSTEM SET log_archive_min_succeed_dest=1 SCOPE=BOTH sid='*'] Executed successfully
DG 2009-11-11-22:04:07 0 2 0 Executing SQL [ALTER SYSTEM SET fal_server='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=SRV-LOGMEC-001)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCLA_XPT)(SERVER=dedicated)))']
DG 2009-11-11-22:04:07 0 2 0 SQL [ALTER SYSTEM SET fal_server='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=SRV-LOGMEC-001)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCLA_XPT)(SERVER=dedicated)))'] Executed successfully
DG 2009-11-11-22:04:07 0 2 0 Executing SQL [ALTER SYSTEM SET fal_client='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=SRV-LOGMEC-002)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCLB_XPT)(INSTANCE_NAME=ORCLSID)(SERVER=dedicated)))']
DG 2009-11-11-22:04:07 0 2 0 SQL [ALTER SYSTEM SET fal_client='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=SRV-LOGMEC-002)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCLB_XPT)(INSTANCE_NAME=ORCLSID)(SERVER=dedicated)))'] Executed successfully
DG 2009-11-11-22:04:07 0 2 0 Database Resource SetState succeeded
DG 2009-11-11-22:04:07 0 2 0 RSM 0 received SETSTATE request: rid=0x02031000, sid=1, phid=2, econd=7, sitehndl=0x7fffffff
DG 2009-11-11-22:04:07 0 2 0 Physical Apply Resource: SetState ONLINE, phase BUILD-UP, External Cond ENABLE
DG 2009-11-11-22:04:07 0 2 0 Executing SQL [ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL]
DG 2009-11-11-22:04:13 0 2 0 SQL [ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL] Executed successfully
DG 2009-11-11-22:05:11 0 2 0 Executing SQL [ALTER DATABASE RECOVER MANAGED STANDBY DATABASE THROUGH ALL SWITCHOVER DISCONNECT USING CURRENT LOGFILE]
DG 2009-11-11-22:05:17 0 2 0 SQL [ALTER DATABASE RECOVER MANAGED STANDBY DATABASE THROUGH ALL SWITCHOVER DISCONNECT USING CURRENT LOGFILE] Executed successfully
DG 2009-11-11-22:05:17 0 2 0 INSV: All instances have replied for message
DG 2009-11-11-22:05:17 0 2 0 req_id 2.1.702684180, opcode CTL_ENABLE, phase BUILDUP
DG 2009-11-11-22:05:17 0 2 702684180 DMON: Entered rfm_release_chief_lock for CTL_ENABLE
DG 2009-11-11-22:05:22 0 2 702684180 DMON: Entered rfm_get_chief_lock() for CTL_ENABLE, reason 0
DG 2009-11-11-22:05:22 0 2 702684180 DMON: chief lock convert for write op CTL_ENABLE
DG 2009-11-11-22:05:22 0 2 702684180 DMON: chief lock convert for enable
DG 2009-11-11-22:05:22 0 2 702684180 DMON: CLSR being notified to enable services and startup standby instances as appropriate during ENABLE.
DG 2009-11-11-22:05:22 0 2 702684180 DMON: status from rfi_post_instances() for ENABLE = ORA-00000
DG 2009-11-11-22:05:22 0 2 0 INSV: Received message for inter-instance publication
DG 2009-11-11-22:05:22 0 2 0 req_id 2.1.702684180, opcode CTL_ENABLE, phase END, flags 5
DG 2009-11-11-22:05:22 0 2 702684180 rfm_inst_phase_dispatch 16 END phase processing
DG 2009-11-11-22:05:22 0 2 0 INSV: All instances have replied for message
DG 2009-11-11-22:05:22 0 2 0 req_id 2.1.702684180, opcode CTL_ENABLE, phase END
DG 2009-11-11-22:05:22 0 2 702684180 DMON: Entered rfm_release_chief_lock for CTL_ENABLE
DG 2009-11-11-22:05:22 0 2 702684180 DMON: Data Guard Broker initiated operation complete
DG 2009-11-11-22:05:22 0 2 702684180 DMON: CTL_ENABLE operation completed
Alert oracle primary:
FAL[server]: Fail to queue the whole FAL gap
GAP - thread 1 sequence 731-731
DBID 2809078314 branch 696087148
Wed Nov 11 22:05:17 2009
ALTER SYSTEM SET log_archive_dest_2='service="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=SRV-LOGMEC-002)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCLB_XPT)(INSTANCE_NAME=ORCLSID)(SERVER=dedicated)))"',' LGWR ASYNC NOAFFIRM delay=0 OPTIONAL max_failure=0 max_connections=1 reopen=300 db_unique_name="ORCLB" register net_timeout=180 valid_for=(online_logfile,primary_role)' SCOPE=BOTH;
Wed Nov 11 22:05:17 2009
ALTER SYSTEM SET log_archive_dest_state_2='ENABLE' SCOPE=BOTH;
Wed Nov 11 22:05:17 2009
Thread 1 cannot allocate new log, sequence 805
Private strand flush not complete
Current log# 2 seq# 804 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCLA\REDO02.LOG
Thread 1 advanced to log sequence 805
Current log# 3 seq# 805 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCLA\REDO03.LOG
Wed Nov 11 22:05:22 2009
LNS: Failed to archive log 2 thread 1 sequence 804 (3113)
LGWR: Setting 'active' archival for destination LOG_ARCHIVE_DEST_2
LNS: Standby redo logfile selected for thread 1 sequence 805 for destination LOG_ARCHIVE_DEST_2
Alter oracle standby
Primary database is in MAXIMUM PERFORMANCE mode
Wed Nov 11 22:05:22 2009
RFS LogMiner: Client disabled from further notification
Primary database is in MAXIMUM PERFORMANCE mode
RFS[1]: Successfully opened standby log 4: 'C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCLA\ONLINELOG\O1_MF_4_59HJ9T8L_.LOG'
Wed Nov 11 22:05:46 2009
FAL[client]: Failed to request gap sequence
GAP - thread 1 sequence 731-731
DBID 2809078314 branch 696087148
FAL[client]: All defined FAL servers have been attempted.
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
Wed Nov 11 22:06:01 2009
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 5848
RFS[2]: Identified database type as 'physical standby'
Wed Nov 11 22:17:54 2009
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Can anyone see what !"·$%& is wrong whit this? maybe is the gap? this is a exact copy of the primary but set to standby.SQL> recover database using backup controlfile;
ORA-00279: el cambio 25608871 generado en 09/24/2009 23:08:11 es necesario para
el thread 1
ORA-00289: sugerencia: D:\ORADATA\ARCHIVELOGS\ORCLB\DBSID_1_731_696087148.ARC
ORA-00280: el cambio 25608871 para el thread 1 estß en la secuencia n·mero 731
Especificar log: {<RET>=sugerido | nombre_archivo | AUTO | CANCEL}
ORA-00308: no se puede abrir el archive log
'D:\ORADATA\ARCHIVELOGS\ORCLB\DBSID_1_731_696087148.ARC'
ORA-27041: no se ha podido abrir el archivo
OSD-04002: no se ha podido abrir el archivo
O/S-Error: (OS 2) El sistema no puede hallar el archivo especificado.
So how i can recreate this file if i dont have it? anyone can help, please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -
I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
Thank you in advance,
LeftyThis was one solution from the socket programming forum, have you tried this??
public Thread MyThread extends Thread{
boolean active = true;
public void run(){
ss.setSoTimeout(90);
while (active){
try{
serverSocket = ss.accept();
catch (SocketTimeoutException ste){
// do nothing
// interrupt thread
public void deactivate(){
active = false;
// you gotta sleep for a time longer than the
// accept() timeout to make sure that timeout is finished.
try{
sleep(91);
}catch (InterruptedException ie){
interrupt();
} -
Problem with Threads and a static variable
I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
protected static void Init(){
objMainProcess = new Thread() {
public void run() {
while( objMainProcess == Thread.currentThread() ) {
GetState();
objMainProcess.setDaemon( true );
objMainProcess.start();
public static void initStatusTimer(){
if(objTimer == null)
objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
public void actionPerformed( java.awt.event.ActionEvent evt){
SetState();
private static void SetState(){
if( objMainProcess == null ) return;
synchronized( objMainProcess ) {
bChanged = true;
try{
objMainProcess.notify();
}catch( IllegalMonitorStateException e ) {}
private static boolean GetState() {
if( objMainProcess == null ) return false;
synchronized( objMainProcess ) {
if( bChanged) {
SendMessage();
bChanged = false;
return true;
try {
objMainProcess.wait();
}catch( InterruptedException e ) {}
return false;
}Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D. -
Problem with threads running javaw
Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue; // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer) // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
// System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
}catch(Exception a){
JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run -
Problem with threads and camera.
Hi everybody!
I've a problem with taking snapshot.
I would like to display a loading screen after it take snapshot ( sometimes i
have to wait few seconds after i took snapshot. Propably photo is being taken in time where i have to wait).
I was trying to use threads but i didn't succeed.
I made this code:
display.setCurrent(perform);
new Thread(new Runnable(){
public void run() {
while((!performing.isShown()) && (backgroundCamera.isShown())){
Thread.yield();
notifyAll();
}).start();
new Thread(new Runnable(){
public void run() {
try {
this.wait();
} catch(Exception e) {
exceptionHandler(e);
photo = camera.snapshot();
display.setCurrent(displayPhoto);
}).start();This code is sometimes showing performing screen but sometimes no.
I don't know why. In my opinion performing.isShown() method isn't working correctly.
Does anyone have some idea how to use threads here?Hi,
I've finally managed to work this fine.
The code:
Object o = new Object();
display.setCurrent(perform);
new Thread(new Runnable(){
public void run() {
while(!performing.isShown()){
Thread.yield();
synchronized(o) {
o.notify();
}).start();
new Thread(new Runnable(){
public void run() {
try {
synchronized(o) {
o.wait(1);
} catch(Exception e) {
exceptionHandler(e);
photo = camera.snapshot();
display.setCurrent(displayPhoto);
}).start(); -
We have a problem where our application stops responding after a few days of usage. Things will for fine for a day or two, and then pretty quickly threads will start getting hung up, usually in places where they are allocating memory
We are running WebLogic 8.1 SP2 on Sun JDK 1.4.2_04 on Solaris 8 using the alternate threading model and the -server hotspot vm. We are running pretty much the same code that we had no problems with under WebLogic 6.1 SP4 and Sun JDK 1.3.1.
A thread dump usually shows that some or all of our execute threads are in the state "waiting for monitor entry" even though they are not currently waiting on any java locks. Here is a sample thread from the thread dump (we have ~120 threads so I don't want to post the full dump).
=============================================================================================
"ExecuteThread: '8' for queue: 'itgCrmWarExecutionQueue'" daemon prio=5 tid=0x005941d0 nid=0x2c waiting for monitor entry [c807f000..c807fc28]
at java.lang.String.substring(String.java:1446)
at java.lang.String.substring(String.java:1411)
at weblogic.servlet.internal.ServletRequestImpl.getRelativeUri(ServletRequestImpl.java:1872)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3492)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
=============================================================================================
String.java line 1446 for this jdk allocates a new String object, and all the other threads in this state also are creating new objects or arrays, etc.
We've done a pstack on this process when it's in this state, and the threads that are in the "waiting for monitor entry" that look like they're allocating memory are all waiting on the same lwp_mutex_lock with some allocation method that's calling into the native TwoGenerationCollectorPolicy.mem_allocate_work (see pstack output below for the same thread as in the thread dump above)
=============================================================================================
----------------- lwp# 44 / thread# 44 --------------------
ff31f364 lwp_mutex_lock (e3d70)
fee92384 __1cNObjectMonitorGenter26MpnGThread__v_ (5000, 525c, 5000, 50dc, 4800, 4af0) + 2d8
fee324d4 __1cSObjectSynchronizerKfast_enter6FnGHandle_pnJBasicLock_pnGThread__v_ (c807f65c, c807f7d4, 5941d0, 0, 35d654, fee328ec) + 68
fee32954 __1cQinstanceRefKlassZacquire_pending_list_lock6FpnJBasicLock__v_ (c807f7d4, ff170000, d4680000, 4491d4, fee1bc2c,
0) + 78
fee3167c __1cPVM_GC_OperationNdoit_prologue6M_i_ (c807f7bc, 4400, ff170000, 2d2b8, 4a6268, c807fa18) + 38
fee2e0b0 __1cIVMThreadHexecute6FpnMVM_Operation__v_ (c807f7bc, 963a8, 0, 0, 1, 0) + 90
fed2c2a4 __1cbCTwoGenerationCollectorPolicyRmem_allocate_work6MIii_pnIHeapWord__ (962c0, ff1c29ec, ff1c297c, ff131a26, 4800, 4998) + 160
fed22940 __1cNinstanceKlassRallocate_instance6MpnGThread__pnPinstanceOopDesc__ (ee009020, 5941d0, 15ca581, 3647f0, 4a6268, c807f8c8) + 180
fed34928 __1cLOptoRuntimeFnew_C6FpnMklassOopDesc_pnKJavaThread__v_ (ee009018, 5941d0, 0, 0, 0, 0) + 28
fa435a58 ???????? (ee009018, e86de, 15ca4de, 50dc, 5941d0, c807f9c8)
fb36f9a4 ???????? (0, d412ccd8, ee046c28, ff170000, 0, 0)
fad8b278 ???????? (ee046c28, d6000c90, ee046530, 8, db8e8450, c807f9e8)
fad62abc ???????? (d412ccd8, ee046530, d6000c90, ee3bfa38, 8, c807fa18)
fa4b3c38 ???????? (c807fb9c, 0, f2134700, fa415e50, 8, c807faa8)
fa40010c ???????? (c807fc28, c807fe90, a, ee9e1e20, 4, c807fb40)
fed5d48c __1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_ (c807fe88, c807fcf0, c807fda8, 5941d0, 5941d0, c807fd00) + 27c
fee4b784 __1cJJavaCallsMcall_virtual6FpnJJavaValue_nLKlassHandle_nMsymbolHandle_4pnRJavaCallArguments_pnGThread__v_ (ff170000, 594778, c807fd9c, c807fd98, c807fda8, 5941d0) + 164
fee5e8dc __1cJJavaCallsMcall_virtual6FpnJJavaValue_nGHandle_nLKlassHandle_nMsymbolHandle_5pnGThread__v_ (c807fe88, c807fe84, c807fe7c, c807fe74, c807fe6c, 5941d0) + 6c
fee6fc74 __1cMthread_entry6FpnKJavaThread_pnGThread__v_ (5941d0, 5941d0, 838588, 594778, 306d10, fee69254) + 128
fee6927c __1cKJavaThreadDrun6M_v_ (5941d0, 2c, 40, 0, 40, 0) + 284
fee6575c _start (5941d0, fa1a1600, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Also when it's having this problem, the "VM Thread" is always using a lot of processor time. We did a couple of pstacks today while it was having this problem, and this thread was stuck in the ONMethodSweeper.sweep for over 15 minutes when we finally killed the server.
From the thread dump:
"VM Thread" prio=5 tid=0x000e2d20 nid=0x2 runnable
From the first pstack:
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed40c04 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (42a2f4, fa5fa46d, ffffffff, fc4ffcb8, 42a2f4, 42a324) + 124
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (42a2f0, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (fa5f7f88, fa608940, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Second pstack
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed41180 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (0, ff1b9664, ffffffff, fc4ffcb8, a6f2cc, fc4ffbd0) + 6a0
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (a6f2c8, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (faded4c8, fadf2c80, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Has anyone ever seen anything like this? I'm trying to figure out if this is caused by something we're doing, or something relating to our environment and jvm options. Any ideas?Thanks for the reply - I'm testing our app with the +UseConcMarkSweepGC now in our test environment to make sure it doesn't cause any problems there. Unfortunately the only place we've had this problem is on the production server, so it's extra difficult debugging this.
We're using the following memory options:
-ms512m -mx512m -XX:NewSize=128m -XX:PermSize=192m -XX:MaxNewSize=128m -XX:MaxPermSize=192m -XX:SurvivorRatio=8and the following debugging options, as we've also been seeing OutOfMemoryErrors ( see http://forum.java.sun.com/thread.jsp?forum=37&thread=522354&tstart=45&trange=15 )
-verbosegc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGCBTW, which c++filt version and options are you using? Our Solaris boxes only seem to have the GNU version installed. I was trying to run that on some of the other stack traces and wasn't getting anywhere, and didn't know if because it was GNU version wouldn't work on something compiled with the Sun compiler.
Thanks!
--Andy -
Problem with threads and ProgressMonitor
Dear Friends:
I have a little problem with a thread and a ProgressMonitor. I have a long time process that runs in a thread (the thread is in an separate class). The thread has a ProgressMonitor that works fine and shows the tasks progress.
But I need deactivate the main class(the main class is the user interface) until the thread ends.
I use something like this:
LongTask myTask=new LongTask();
myTask.start();
myTask.join();
Now, the main class waits for the task to end, but the progress monitor don`t works fine: it shows only the dialog but not the progress bar.
What's wrong?Is the dialog a modal dialog? This can block other UI updates.
In general, you should make sure that it isn't modal, and that your workThread has a fairly low priority so that the UI can do its updating -
Problem with threads and/or memory
I'm developing an application where there are 3 threads. One of them sends a request to the other, and if the 2nd can't answer it, it sends it to the 3rd (similar to CPU -> CACHE -> MEMORY). When i run the program with 1000-10.000 requests, no problem occurs. When i run it with 300.000-1.000.000 requests, it sometimes hangs. Is this a problem with the garbage collector, or should it be related to the threads mecanism.
(note: eache thread is in execution using a finite state machine)i had been running the program inside Netbeans.
Running the jar using the command line outside
Netbeans i have no more problems... Does Netbeans use
it's own JVM?Depends how you set it up, but look under the options. There are settings for the compiler and jvm that it uses. -
Installation problem with NW'04 SR1: database connection failed
Hi all,
while installing NW '04 SR1 on Windows Server 2003 SP1 and MS SQL Server 2000 SP4 I ran into an error related to the database connection. While performing the step "Load Java Database content" SAPinst crashes with the message
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
The connection to the SLQ Server with e.g. the Query Analyzer is OK. I had a problem with this installation setup before (have a look at the corresponding <a href="https://forums.sdn.sap.com/thread.jspa?threadID=338638&tstart=0">thread</a> ), the JDBC drivers where missing on the installation master but after copying them in the right direction the installation went on with no problem up to this point...
Has anybody an idea what could have happened here? Is this maybe a problem connected to the one I recently had
Below I attached the sapinst.log and jload.log with more detailed messages.
sapinst.log ###########
INFO 2007-03-12 22:06:24
Working directory changed to C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST.
INFO 2007-03-12 22:06:24
Output of D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' is written to the logfile C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST/jload.java.log.
WARNING 2007-03-12 22:06:26
Execution of the command "D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'" finished with return code 1. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
12.03.2007 22:06:25 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.2007 22:06:26 com.sap.inst.jload.Jload main
SCHWERWIEGEND: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
ERROR 2007-03-12 22:06:26
CJS-20065 Execution of JLoad tool 'D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'' aborts with returncode 1. Check 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' and 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.java.log' for more information.
jload.log ###########
12.03.07 22:06 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.07 22:06 com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
Best regards,
BerndHello Kairat,
Please follow the below mentioned guide to install it.
Check all the parameters to set and run pre requisite checker before starting installation.
Keep in mind that before starting any SAP installation you should always run prerequisite checker.
https://websmp205.sap-ag.de/instguides --> SAP Netweaver -->SAP Netweaver 7.0 -- > Installations --> EHP2
Regards,
Amit Barnawal -
My app store wont let me download apps, asks me to update my payment details then says theres a problem with previous purchase and card is expired which is untrue someone help me pls
This is a User to User Forum...
See Here for
Mac Apps Store Customer Service
http://www.apple.com/support/mac/app-store/contact.html?form=account
iTunes Customer Service Contact
http://www.apple.com/support/itunes/contact.html -
Problem with item and/or data during page-processing-PS/SQL
Greetings!
On my page I have a custom report (from 2 tables) and a small form-field, that adds and edits data in the report. After generating the form with the wizard I added an extra item, to store the id from one of the tables from the report data.
Now, on submit a calculation should take place, that updates data according user input with a procedure in Page-Prosseses:
declare a number;
begin
case :PLATZ
when 1 then a:=100;
when 2 then a:= 50;
else a:=25;
end case;
update TBL_MITGLIEDER set TURNIERPUNKTE = TURNIERPUNKTE + a
where ID_MITGL = :P14_ID_MITGL;
end;
:PLATZ is user selected (1,2,3), :P14_ID_MITGL stores the reference to TBL_MITGLIEDER (and shows the change, when I select another record)
As I understand, that process should also run, when I submit a chance, but nothing happens then.
But when I try to save a new record (which worked without any problems before adding that process), I get this error message:
ORA-06550: line 1, column 64: PL/SQL: ORA-00957: duplicate column name ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
Error Unable to process row of table TBL_TURNIERSIEGER.
Then, when I go back into the app-builder and try to run the page again, I get this message:
ORA-01403: no data found
Error Unable to fetch row.
I am not sure, if you guys have all the information you need, to know whats going on. Maybe this has to do with session-id and the whay, items are updated. I hope you can help me.
Thanks, best regards,
tobiFirst can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook] -
Problem with Gnome3 and/or graphics card Nvidia 8600M GT
Feb 22 07:40:21 localhost dbus[712]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Feb 22 07:50:30 localhost kernel: [ 679.031379] gnome-shell[1277]: segfault at 10 ip 00007f3bbd305c0f sp 00007f3b84ff86d8 error 6 in libnvidia-tls.so.295.20[7f3bbd305000+3000]
Feb 22 07:50:31 localhost gnome-session[888]: WARNING: Application 'gnome-shell.desktop' killed by signal
Feb 22 07:50:35 localhost kernel: [ 683.420948] gnome-shell[1300]: segfault at 10 ip 00007f43bc84dc0f sp 00007f43877fd6d8 error 6 in libnvidia-tls.so.295.20[7f43bc84d000+3000]
Feb 22 07:50:35 localhost gnome-session[888]: WARNING: Application 'gnome-shell.desktop' killed by signal
Feb 22 07:50:35 localhost gnome-session[888]: WARNING: App 'gnome-shell.desktop' respawning too quickly
Feb 22 06:52:39 localhost rtkit-daemon[1004]: Successfully made thread 1420 of process 1420 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Feb 22 07:52:39 localhost goa[1441]: goa-daemon version 3.2.1 starting [main.c:112, main()]
Feb 22 07:58:22 localhost kernel: [ 1150.316794] CE: hpet increased min_delta_ns to 20113 nsec
Hi,
Here is my /var/log/messages.log output.
Since several days my computer repeatedly restarts programs that require at least a bit memory, such as firefox ('segmentation fault'), skype, virtualbox, generaly gnome 3 environment. Sometimes it happens that the system hangs and I can't do nothing, although I can hear that hard disk is working - at that moment only hard reset helps.
I know that the Dell Inspiron laptops (1720) have problems with Nvidia 8600M GT (the cold solder). Is it like that this time? Or maybe something wrong with the memory, CPU (Core Duo) cache memory?
I will be happy to add any additional information.
Regards,
LukaszDid you update the nividia driver recently?
there are some threads on this
Maybe you are looking for
-
How do I set up genius mixes on my iPhone with iTunes match
I have used genius mixes on my phone, but now that I have iTunes match I no longer see the controls for turning on the genius mixes for my phone. How do I do that?
-
Purchased Coldplay album not in previous purchases
I pre-purchased Coldplay's Mylo Xyloto album, and it downloaded when the album came out, and I recently synced all my music to my phone and wasn't able to play it in my car today. I went to the iTunes app on my phone where it had some coldplay singl
-
Adding custom field to product master general tab
Hi All, i want to add a custom field in Product master creation (commpr01) ,could any one help me out on this ! Many thanks and Regards.
-
Audit log of the User access and permissions
Hi All, We need to have the Audit trail of the user access and permission. Meaning Changes to user access rights will be logged. This should include: Current Access Rights (including Date the access was given), Group membership (including Date the ac
-
XMII data base and without XI c
Dear friends I would like to know the following clarification 1)xMII system pulling data from R/3 system and various legacy system. The pulled data is using for analyzing purpose and Is it the date storing in xMII system? How it is working? 2) Is it