Problem with rendering my project

Hello,
today I tried to render my latest project in Premiere Pro CS6 to upload it to youtube. With an estimated file size of ~2 Gigabytes I started the rendering process and waited for it to finish (about 50 minutes).
After it had finished with rendering I checked the file and what I saw was a 35 Megabytes file with the worst video quality one can even imagine. What is wrong with my premiere pro -.-
I've put many time and effort in my project and now it doesn't render properly. The interesting thing is that the preview in the full resolution inside my premiere pro application looks way better than the rendering result. WTF!?
Later I tried the option "render workspace" which took just about the same time (about 50 minutes) and brought me 7 rendered video previews... summed up 40 Gigabytes.
I am like kinda mad and sad at the same time and really can't figure out what is wrong. Please help me.
Here are my Output settings:
H.264 codec
1920 * 1080
29,97 FPS
high profile and 5.1
Bitrate: I tried everything from 8 to 100 (output always about ~40 Megabytes)
maximum depth
and maximum render quality
Please mention it if you need more information about this as I will be happy to provide detailed information and excuse my bad english, it isn't my mother tongue.

Yeah, but as you could may imagine i watched the render result
I could just go ahead and render it in 240p same result... Its way off in points of quality even compared to the preview on the top right
I mean I am not using premiere pro for the first time and this is the first time that i have to encounter this kind of problem. maybe I should try to render some of my old projects to see if they too result in 45 Mb ****** videos.
Someone help me

Similar Messages

Problems with rendering quality in Premiere Elements 9

Hello, I've made a few videos with PE 9 now, and I get very poor quality rendering despite trying several different settings. I saw on a help thread earlier that I needed to try changing to HD when creating the new file from the beginning. I did that, but it only made my PE 9 run more slowly, and the rendering quality was not improved. I also read somewhere that using .MOV files as a source can cause problems with rendering; is that true? I hope not! I use a Lumix bridge camera for my videos, and the video quality is very good. And when I'm working with these videos within PE 9 the quality is great. It's only when exporting to various file types that the quality suddenly becomes poor. For the most part I have made compilation videos of gymnasts, and when their legs move they are often so lined or pixelated that they become invisible. Here is an example of a short gym video I made yesterday: http://www.youtube.com/watch?v=-0s7tUBcSZk. The last girl jumping gives the best example of this invisible leg problem.
You can see the original source films here: http://www.youtube.com/watch?v=zmUMi9oN8dQ
http://www.youtube.com/watch?v=OEzcJZjhxiI
and http://www.youtube.com/watch?v=I53twqPQMV4
The sequences I took in my compilation video start at about 20 seconds in the source videos.
Youtube does reduce the quality of the videos slightly, but in any case you can definitely see a difference in quality between the source videos and the PE 9 rendered compilation video.
I'm quite disappointed because I made a longer compilation video set to music (which was a lot of work), and it looks so much nicer on PE 9 than on any of the rendered formats, but of course I can't share the PE 9 version!
Thanks very much for your help.
Chleste

Thanks Steve. I'm not sure what resolution I'm shooting in, actually. However, the thing is that when I make these compilations, I like to go back to source videos I've made in the past sometimes. Sometimes these videos come from a Canon camera, and sometimes they even come from my Samsung mobile telephone. I like being able to creatively combine historic moments, and these moments might have been recorded without any intention at the time of making a compilation video. Is it not possible to combine several kinds of video sources?
I'm uploading an example of a compilation with mixed source videos from various kinds of cameras. It's 710 Megs so it will take a while, but when it's finished you will be able to see it at http://youtu.be/CslpULRe4LU.
I opened up the file for the compilation of the four girls on the beam (video posted in original message), and I do indeed see those red lines in the timeline. Is there anything I can do now about that, or do I have to start the project all over?
I'm confused about the processor requirements. Even if I can see my video perfectly in PE 9, the actual export process will be affected if my system is not up to par? If so, that's a bit disappointing! I'm not sure what my processor details are, but I will find out and let you know.
Many thanks.

I have problems with creating new projects in iMovie.

I have problems with creating new projects. When i try, the mac says the following "Make sure there is enough disk space and that you have permission to write the projects to the drive." I have 8GB available, so its not that.

thanks for your support
lol

Problem with rendering RGB with alpha

I have AE 6.5. I suddenly began having .AVI's with alpha channel rendering with a flickering background with numerous flashing colors.
I did system restore, reinstalled 6.5 with no help.
No new programs, not hooked to internet, using 2 gigs RAM with AMD athalon FX 53,Nvidia GeForce FX 5500.
I tried several different projects which have previously worked and they do the same thing.
Rendering as Video for Windows with no compression. RGB + Alpha
Rendering with just RGB doesn't have the flickering, etc.
Preview set to "off" in comp window.
Any help would be greatly appreciated.
Thanks in advance.
John Rich

> I have AE 6.5. I suddenly began having .AVI's with alpha channel rendering with a flickering background with numerous flashing colors.
But when you composite these lcips I'll bet the alpha content is not really there.
We used to have this problem with the Media 100 hardware codec when rendering form After Effects. The alpha channel was full of the creepiest stuff, frame buffers motion blur and effects from other compsand it was really there. Playing the clip back in Media 100 or in QT showed the alpha channel's bizarre content.
However, if you turned off RGB and viewed alpha only, the stuff was gone, absolutely transparent. If you dropped the clip into a timeline, the alpha behaved normally.
We never did figure it out, just lived with it.
bogiesan

Having problems with rendering clipls

I am new to Premier elements, and am having problems with my clips needing frequent rendering. Clips that have been rendered go from green (line) to red when a transition is added or if it is trimmed and must be rendered again. Also rendering seems to take a very long time, sometimes going fast, sometimes going a frame per second or slower. One possible problem is that I am mixing clips from two different cameras, one a HD and the other a standard def camera. I don't know if this is a factor or not.

If your clips are initially importing with a red line your project preset may be wrong - what preset are you using?
After applying transitions or effects it is normal for those segments to go red line.
It doesn't help to use two different types of video in one project. What is your final output intent - DVD or BluRay? If DVD then it would be better to convert your HD material to DV-AVI. See the Gspot link below - analyse both types of clip you are using and post the screen images here.
Some basics:
Install all Windows Updates.
Install latest version of Apple QuickTime (v7.6.7 at time of writing). Even if you don't use QuickTime, PRE relies heavily on it.
Install most recent graphics and sound drivers from the manufacturers web sites.
Run Disk Cleanup.
Run Defragmenter.
Temporarily disable any anti-virus realtime scanning.
Use the GSpot Codec Information Utility to analyse the file and post screen image.
Post back here with the necessary information described here: Got a Problem? How to Get Started
Cheers,
Neale
Insanity is hereditary, you get it from your children

Problems with Rendering - Freezing at %50

Hi there
Windows 7
8gb RAM
Intel Core i7 930
Nvideo Gefore GTX 480
I've been having problems with my Premiere Pro CS4 renders. I've recently rendered Photoshop based graphics with LOTS of layers in an HD format without problem.
But now working with 1080p AVCHD, I've been having issues. I've had 2results:
1.) Doing a small chunk (about 450 frames), it has frozen at %50 3 times in a row.
2.) Doing a bigger chunk, it completed the render but then didn't update the sequence window with the green line, playback wasn't working and then moments later the whole program froze.
My exports work completely fine though, just not the renders.
my only thought is, is that I specified I'd be working at 1080i30 (60i) because I'm 90% sure that's what the video was shot in, but maybe I was wrong.

I lied, 30p is just as bad... I can only do 1 opacity fade or 1 video transition.. once I do 2, Premiere stutters and pauses on the transtion, then gets unstuck but the video goes into hyper speed for a second.
I tried updating video card and changing audio, no success.
I have a feeling it's CS4, Adobe rushed CS4 with AVCHD support to get quick sales... the really AVCHD support is in CS5... I mean... Adobe forgot to put in the LPCM audio codec which is AVCHDs main audio codec and is an audio codec that has been around since the 80s...
Frustrating, any other suggestions? I think I'm going to have to reformat, and do a driver by driver/codec by codec installation... maybe I installed a codec I shound't have or something.
*edit*
Also, I'm 90% sure that when trying to render effects, it's the video transitions that Adobe Premiere is getting stuck on during the render... It doesn't make any sense, I can playback the transitions but I can't render them? I can play through one transition completely fine if there is only 1 transition in the entire project, but if I have 2 then all the transitions become choppy?
Like I'm only doing BASIC cut, paste, copy, transition video editing here...

Burn Problem with a 4GB project: "Layer 0 Exceeds"

First off this is not the usual Dual-Layer problem. I know all about Layers how they work and how to make them. Although the error I receive deals with DL my projects or nowhere near that size.
I recently had DVDSP 4 crash on me. Ever since than its been running really funny. The biggest issue I am having is that it won't allow me to burn a DVD 5. My projects usually range from 2.5GB - 4.5GB. Let me also say that DVDSP 4's Disc meter has always been a pretty good gauge as far as I am concerned. It's always been right on telling me if something was going to fit on a DVD 5 or 9.
My problem ever since the crash is that DVDSP will not allow me to burn a DVD unless the project is under 3.5GB. I have tried everything, including a Full Re-install of DVDSP. Every time I try to burn a DVD I get the following error message:
+"Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."+
My latest project is dealing with a 4.4Gb (according to Meter) 4.32GB actually. It is impossible for me to burn a DVD because of the error message above. I can however run the project out on a Single DLT. How does that work?
Has anyone else had a problem like this? Does anyone have an suggestions?
I have checked all the obvious settings in DVDSP and all seem to be right. I can't figure this one out.

I've never had a problem burning a 4.4 disc on a DVD 5 until now. I actually went back to some of my previous project that were a DVD-5 and I am unable to burn those now too. Everything really got screwed up on that last Crash.
Yes. I am using AC3 audio.
I have not yet tried burning my DVD project through another program...but thats a good idea.
I usually burn a DVD and DLT for the replicators...but I know they prefer a DLT. What I find odd about all of this is that I am able to run out a DLT with no errors at all. It only seems to be on the DVD side.
In regards to the uninstall...I used the exact program. I am actually in the process of doing a full reinstall of FCP2 Suite.
I'll let you know how it goes. Thanks for the suggestions.
Mike A.

Problem with rendered attribute in jhs 10.1.3.3

We are currently trying to migrate our applications from jhs 10.1.3.2.52 to jhs 10.1.3.3.87 using jdeveloper 10.1.3.5. We are facing a problem with all the detail groups structured inside detail group regions - they have all disappear from the pages.
In my example code i have two master-detail groups Products (Master) and ExpertiseAreas (Detail) on the same page:
Products - Group
-> ExpertiseAreasDtl - Detail Group Region
-> ExpertiseAreas - Group (Samepage="true")
The problem is that the detail group ExpertiseAreas is not rendered on the page.
As i looked in through the pages generated by the 2 different releases of jhs using the same app definition, i can see the following:
CODE GENERATED FOR THE ExpertiseAreasDtl Detail Group Region (all the vms used are the default):
in jhs10.1.3.3.87:
<af:panelGroup *rendered="#{(ProductsIterator.currentRow!=null and ProductsIterator.findMode!='true')}"* id="ProductsRegionsExpertiseAreasDtlPanelGroup">
in *jhs 10.1.3.2. 52*:
<af:panelGroup id="ProductsRegionsExpertiseAreasDtlPanelGroup">
First of all a rendered attribute is being generated in the new version of jhs and not in the old.
The real problem seems to be with the iterator binding generated from verticalRegionContainer.vm in the regular expression: "#{(ProductsIterator.currentRow!=null and ProductsIterator.findMode!='true')}". It should have been *bindings.*ProductsIterator and not plain ProductsIterator. Has anybody got any ideas on how to solve the problem?
Thanks
Giorgos
Edited by: user647567 on 17 Δεκ 2009 2:16 πμ
Edited by: user647567 on 17 Δεκ 2009 5:58 πμ

Giorgos,
We have uploaded a new service update, 10.1.3.3.88, on the cso.oracle.com site. This should fix your issue.
Steven Davelaar,
JHeadstart Team.

Problem with rendered tables in JHeadstart 10.1.3.3.87

Hi,
We have recently upgraded from Jhs 10.1.3.3.52 to 10.1.3.3.87 (using JDev 10.1.3.4.0.4270) and have run into a problem with a window using regions. We have horizontal region containers, vertical region containers, stacked region containers and detail group regions. The tables in these containers/regions are not rendering at all. When I compared the .jspx pages of both versions of Jhs I noticed the 10.1.3.3.52 version had the following code (which works) as
<af:panelGroup rendered="#{(bindings.AwardView1Iterator.*currentRowIndexInRange!=-1* and bindings.AwardView1Iterator.findMode!='true')}" id="AwardView1DetailGroupsBelow" partialTriggers="AwardView1Table">
and the 10.1.3.3.87 version had the following code as
<af:panelGroup rendered="#{(bindings.AwardView1Iterator.*currentRow!=null* and bindings.AwardView1Iterator.findMode!='true')}" id="AwardView1DetailGroupsBelow" partialTriggers="AwardView1Table">
the problem seems to be in the following line in the horizontalRegionContainer.vm and stackedRegionContainer.vm -
#JHS_PROP("rendered" $subRegion.rendered)
as in line 33 of the horizontalRegionContainer.vm - <af:panelGroup #REGION_PARTIAL_TRIGGERS($subRegion) *#JHS_PROP("rendered" $subRegion.rendered)* id="#REGION_ID()${subRegion.name}PanelGroup" and
as in line 32 of the stackedRegionContainer.vm - <af:showDetailItem text="#REGION_TITLE($subRegion)" *#JHS_PROP("rendered" $subRegion.rendered)* #JHS_PROP("disabled" $subRegion.disabled) #REGION_PARTIAL_TRIGGERS($subRegion) id="#REGION_ID()${subRegion.name}Tab">
has anyone run into a similar problem?
thanks,
Lana

Thanks Steven!
We appreciate the reply and this solution. Could you, or anyone, point us in the direction of helpful documentation with respect to Velocity Templates. We don't really have as good an understanding as we would like, and most of our customizations are our best guess.
Thanks very much.
MaryB
U of Windsor

Problems with a xcode project

Hi there,
I'm trying to compile an existing Xcode project which has used boost library and threadpool library. I have already added the correct header path and library path, and the boost has been successfully compiled(cause the code uses libboost_thread.a).
Here's my header search path:
/usr/local/installation/prefix/include(boost header after installed)
/usr/local/boost1_450
/Users/niexiao2008/threadpool-025-src/threadpool/boost
And the library search path is:
/usr/local/installation/prefix/lib
I'm sure the boost library has been installed correctly and passed through some test codes, but there's still some problems when buliding the project:
i686-apple-darwin10-gcc-4.2.1: error trying to exec '/Developer/usr/bin/../libexec/gcc/i686-apple-darwin10/4.2.1/cc1plus': execv: Argument list too long
Command /Developer/usr/bin/gcc-4.2 failed with exit code 1
Could someone please help?

In the Build results window select the compile line that is failing. This should reveal a 'details' icon on the line to the right. Click the icon to display the actual compile command and try to determine why the argument list is too long.

Problems with opening/creating projects

Hi all, this is my first post so Welcome
I have a problem with Photoshop CS4 Extendet. After installing it under Windows 7 when I'm trying to start a new project or open a graphic in Photoshop the only thing which happens is a gray window of project without any graphic, without possibility to work on it etc. I know that graphic is loaded but I can't work on it. When I'm trying to move/large window, it crashes. Here you can see what I see when I load any graphic: http://img231.imageshack.us/img231/6120/61404388.jpg - you can see that photograph is loaded in layers menu section but in window it doesn't appear.
I have used this Photoshop under Windows 7, even same computer some time ago, but with different hard disc. And then it worked properly without any problems. I don't know why now after installing it I have such problems. What can I do? Is it a metter of drivers for graphic cards ot something like that? I'm useing the latest drivers for graphic card and all drivers for Windows and it's components are the newest one.
Here is ma computer specification:
Processor Intel Core i7 920 2.67GHz, 6GB ram, two graphic cards NVIDIA GeForce GTX 285, motherboard Asus P6T Intel X58 Windows 7 Home edition 64 bit.
What should I do now?

As is so often suggested here, check the nVidia web site for updated video drivers for your card. Chances are very good they have already fixed this problem.
-Noel

Help with Rendering/Finalizing Project Please?

Hi,
I am so new to this entire Adobe and video making that I've spent the last few hours pulling hair literally. I am hoping that some of you experts can take some time to give this novice some much needed guidance. Okay, I'm begging!
I recorded a wedding on a XHA1 MiniDV camera in 1080p 24fps. Captured the clips to PP CS4 which in turn makes them MPEG, I believe. Included in my project are addition clips imported from a Canon HF S21 also in 1080p 24fps and a Rebel T2i in ?? format. Didn't use too many clips from the rebel.
Anyhow, my project settings in PP are:
Video - Display format = Frames
Audio - Display format = Audio Samples
Capture Format = HDV
All Scratch disks are saved on to my desktop with 284 GB
Here is a picture of the sequence settings:
Again, sorry for the ignorance and stupiditiy. I am wondering what would help.
I am trying to burn it all with chapter markers and additional features to a DVD.
- What would be the BEST settings for exporting to Encore?
- Should I separate each section into a different sequence - would that help? For example, the pre-ceremony to one sequence. The ceremony to another. The reception to another. Or should I make new projects for each?
- How can I make my computer faster? Is it the memory, ram, etc? What should I do?
Right now, it has failed over and over in rendering in After Effects. It stops encoding when I export to AME. It says 158 hours for rendering in PP.
HELP!
I am using an iMac and here are computer specs (again, I am not even sure what to post to help you all help me):
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i7
Processor Speed: 2.93 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM112.0057.B00
SMC Version (system): 1.59f2
Here is a pic of what I'm working on. I know the pic-in-pic feature probably doesn't help with rendering time either but 158 hours is killing me. In fact, when I go to sleep, I wake up to an error message where PP has closed.

leevang,
Your computer looks great. I wouldn't be too worried about the time PP shows for encoding etc.
I have found that right when I first start to encode a project, 73 hours or 12 hours is normal. Rendering is not necessary for encoding. However when I look back later, the time has dropped greatly.
Down to 2 or 3 hours. that's when I follow Jeff B.'s suggestions when I do a 2X scan.......

Problems with sharing a project from Final cut x

I have just purchased a canon Legria g10 (pal) and when I share(export) the project I get horizontal lines on the image, the raw footage looks fine in quicktime but when I edit and share it back out of Final Cut x it has the lines. Do I need to de-interlace and if so why? will I have to do this everytime I use the camera? or is the problem with settings on the camera? Any help would be greatly appriciated.
thanks in advance

Hi Tom,
thanks for the swift reply. Here are the screengrabs
the exported footage
the original footage
and the propeties of the original footage
and the properties of the exported file

Problems with burning HDV projects to IDVD

I have been using iDVD to burn my HDV sequences and it has been working great. Just recently when I burn a DVD it comes up with a green band at the bottom of the DVD. It doesn't happen with SD projects. I just upgreaded to Ilife 8 and upgraded my operating system to 10.4.11, does anyone know if there is a problem with this and why all of a sudden I can't burn an a DVD.

Hi iRose,
Thanks for giving all your info. Your free space on your hard drive is not enough to do a successful burn of the entire iPhoto Library. Do you have an external drive? Is your drive supported for iPhoto burning? usually on the internal that comes with the computer is supported.
Try instead to burn the entire iPhoto Library folder in the Finder using your external burner.
Close iPhoto
I can't burn a Cd or DVD
The next info is from iPhoto FAQ on the Apple site
Question 5: Can I burn a CD or DVD to back up my iPhoto library?
Answer: Yes, you can easily back up your iPhoto library by using the CD burning capabilities of Mac OS X. Simply insert a blank CD into your internal or external CD-RW drive and copy the iPhoto library to the CD icon on your desktop. When you drag the CD icon to the Trash/Eject button in the Dock, you are given the option to burn the CD. Click Burn and the CD is created. To burn a DVD backup of your digital images, use iDVD and a SuperDrive-equipped Mac.
Lori

Problem with rendering GeoRaster in MapViewer...

Hi,
I am using the MapBuilder (10.1.3.1), and I import a georaster for an Oracle Spatial 10g Database. I created a GeoRaster Theme and a Base Map including GeoRaster Theme created. In preview mode of Map Builder, the GeoRaster is displayed correctly. In MapViewer (Ver 10131_B061023) this GeoRaster does not appear... A cyan rectangle appears, apparently with the size of GeoRaster...
I have copied the Java Advanced Imaging (JAI) library files (jai_core.jar and jai_codec.jar) to the OracleAS MapViewer library path (\mapviewer\web\WEB-INF\lib), and restart mapviewer...
Does anyone have any idea of what may be happening wrong?
Thanks

There may be a problem with the map request sent to MapViewer. Please post the map request and the log information (you can get from the log file - set the log level to "finest").

Problem with rendering my project

Similar Messages

Maybe you are looking for