Problem with Reoprt 9i on the web
I have a couple of problems with a 9i report running on the web.
This report uses the following system parameters: DESTYPE, DESNAME & DESFORMAT in the parameter form.
When DESTYPE = 'Cache', no value in DESNAME, DESFORMAT = 'PDF', the PDF output is perfect.
When DESTYPE = 'File', DESNAME = 'MyFile', DESFORMAT = 'PDF', it writes to the file perfectly and comes back with a Oracle Reports Job Status - Successfully run.
Scenario 1
However, if the DESNAME has a value, e.g. MyFile, it will output into the named file even though the DESTYPE = 'Cache'. Why?
Additionally, I will also get an Acrobat Reader message -'File does not begin with '%PDF'. What is causing this?
Scenario 2
In addition to the above, I have a user parameter which has a LOV of 'Cache', 'File'. The DESTYPE is suppressed from the parameter form. Instead the DESTYPE value is set by the After Parameter Form trigger with the LOV value.
The report runs but it does not come back with a Oracle Reports Job Status - Successfully run message. Why has this message disappeared?
Also the Acrobat Reader message - 'File does not begin with '%PDF' still appears.
Any help will be appreciated!!!
Thanks.
John
Hello John M Ng,
The problem you are facing is because of a known issue in Reports 9i, due to which DESTYPE=CACHE used to fail when a DESNAME was specified along with it. This bug has been fixed in Reports 9i Patch 2 (9.0.2.2). Please install this patch in order to get the fix.
Thanks,
The Oracle Reports Team.
Similar Messages
-
I have problems saving pdf files in the web when I use Safari. I don't have this problem with firefox.
do they save ok if Safari - Preferences - Security - Allow all other plug-ins is unchecked ?
If so, likely an adobe or other pdf plugin
Re-check the setting above & quit any browsers,
Look in this folder by triple-clicking the line below, then ctrl-clicking it & choosing Services - Open
/Library/Internet Plug-Ins/
remove anything with pdf in the filename & test again
Sometimes, plug-ins can be in the User Library folder :
~/Library/Internet Plug-Ins/ -
Can't open Safari. I get "Can't find server". I get NCSW21 in my address bar. I am using AirPort and have a strong internet signal. I have no problem opening Firefox and surfing the web. Need help. Thanks
Hi Professor66,
I have a couple of suggestions for you regarding this issue. Here are two links to users who have posted similar questions to yours and have found their answers in the responses to their posts:
Safari hangs when loading web pages. | Apple Support Communities
https://discussions.apple.com/thread/3784708
Safari loading blank pages | Apple Support Communities
https://discussions.apple.com/thread/3899912
I would suggest that you first follow the troubleshooting that the OP did in the second link, which is to test in a new user account to see if the behavior is consistent. If it is, you may need to address the issue at a software level by re-installing Safari. More information on this process can be found in the following article:
OS X Mavericks: Reinstall apps that came with your Mac
http://support.apple.com/kb/PH14193
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
Chart - problem with realize one of the function under CR XI
Post Author: mrowa
CA Forum: Charts and Graphs
Hello,
I have
problem with realize one of the function under CR XI. I would be persuade if
any of us would like to help me.
1)
1) From
database (basically from one table), I take data to make report. Each of record
have appropriate fields:
dteData
intYear
intMonth
intDate
2)
2) I
want to realized comparison data from two or more periods of time on one chart
and in one table. For easily explanation I will describe problem on two
periods.For instance, user want to display and compare
on chart date (type monthly -sum data of each month) from 2007.02 u2013 2007.05
with date from 2006.03 u2013 2006.06. So we compare month 2007.02 with 2006.03;
2007.03 with 2006.04; 2007.04 with 2006.05; 2007.05 with 2006.06
On char I would like to display bars with comparison
of months.
Problem is that I donu2019t know how to write
something similar. I can use one period without any problems, but two and mores
I canu2019t realized.
Detail description:
I passed
two parameters two report:
{?from}, {?to} u2013for first period
{?offset}, it means {?from}+{?offset},
{?to}+{?offset} - for second period
On axis Y I have Sum(intDate);On
X (year + month). But on each value x( example 20007.02) I need to have
two values (bars). Value for standard period and offset.
For example for x=2007.02, I need
two bars one equal 2007.02 and second with offset u2013 2006.03
Movement to next value (bar) is
persuade by fields {data.rok}&{data.month} first or second period. This is
combination of two elements year&month defined under Formula. Problem
persist in that both period has different year.month and here problem starts once
again. I donu2019t know how to solve it. I have found out one solution but it
limits user only for two periods (I want to compare more).
My idea for compare only two
periods:
I make one query in CR for one
period and second query for second period.
Firs query:
"SELECT
year ,
month
Second query
"SELECT
year + FLOOR({month + offset} % 13),
{month + offset} % 13
Then in CR I connect two periods and
make u201Ctableu201D (results of queries) with JOIN on fields year and month.
This solution is not functional,
because I need to make reports for days and hours as well. In this solution I
canu2019t use (%31), because not all months has 31 days.
I use CR in WEB app made in Visual
Studio 2005. Maybe from aspx we can manipulate with date to get exact solution,
and solve problem with SELECT.
Hope my description clearly
describe problem and someone will be able to help me. I would be thankful.I have had similar problem before.
Because I had too many data, the legend would not display all the data. Also the chart would not display all the data. But I was able to find a work around.
In your case, Right click on the Legend text and click on Format Legend Entry.
Change the font of the legend to 4 (which is the minimum). This may work.
If you are also having problem with data labels, you could change the font size of the data labels.
Hope this helps.
Thank you. -
Problems while accessing images outside the web document-root folder
Our application runs on Oracle application server on Linux. Facing problems while accessing images outside the web document-root folder. This works with changes in global-web-application.xml by including the <virtual-directory> tag. The same change does not work when done on Linux machine. It is unable to find the image. Please help in resolving this issue.
</locale-encoding-mapping>
</locale-encoding-mapping-list>
</web-app>
<virtual-directory virtual-path="/img" real-path="/home/eposuat/" />
</orion-web-app>
Code in the jsp:
<img width=700 height=700 src="/img/3.tif"></img>
<img width=700 height=700 src="/img/WB.gif"></img>This is one of the least satisfactory aspects of site management in Dreamweaver, and several developers, including myself, have been pressuring the Dreamweaver team for some years to improve this. Who knows? They might eventually take notice.
The only way to do this at the moment is to create two site definitions, one nested inside the other. Set up the site definition normally based on htdocs as your site root. Then create a new site definition based on site. Dreamweaver will nag you that it can cause problems, but it won't actually stop you from doing it. The only potential problem is with site synchronization.
The problem with using site as the only basis for your site definition is that Dreamweaver automatically puts things like the Connections, Scripts, and other folders in the site root. So, everything ends up at the wrong level of the site hierarchy. Quite frankly, the whole thing is a bit of a pain. Dynamic site development was added to Dreamweaver only in version 6 (Dreamweaver MX), and no one had really thought through the need to store files outside the site root. -
Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings! Works fine with an older Safari Version. Web link, call doodle app. You could see the website in the backround working but safari crashes after clicking on the error window. Any suggestions?
Turn off Private Browsing.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off. -
good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be...
I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
Hello , please am having a problem with my iphone 5 , the battery runs out quickly ,another problem also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out . My final problem is that "no service " appears a lot especially when opening wifi or 3G , can you help ?
Your battery is running quickly because your cellular data connection is weak.
Is your phone carrier a supported carrier: Wireless carrier support and features for iPhone in the United States and Canada - Apple Support
For your no service issues: If you see No Service in the status bar of your iPhone or iPad - Apple Support -
Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.
-
Hello,
I have a MacBook Pro Retina Maverick in 2013 on which I installed Windows via Boot Camp 8.1.
The installation went well but when I am running Windows 8.1, I have a problem with "@" and "<" keys on the keyboard.
When I type the "@" key, I get "<"
When I type the "<" button, I get "@"
I have reinstall Boot Camp from Windows 8.1 for reinstall the drivers and see if it would solve the problem but it was not the case.
Someone of you has he encountered the same problem?
Thank you.The language of my Keyboard is French
-
Problem with iWeb 09, after the publication in a local file.
*Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
Please help me.I want to activate the comments, it doesn't work neither.
The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file. -
I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions?
Oh no! Lets ensure that you are connected. Have you tried to reset the Network Extender? Are other devices able to connect to the Extender? Is your Internet service up and running?
Share details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport -
Hi There: I am having a problem where pdf files on the web (i.e., links in a Word doc) open after an extended time and only as gobbldygook ( a file containing a series of characters and letters that make no sense). This also happens for another Mac user coworker in my office, while the PCs don't have this problem... Any help/suggestions for a fix would be most appreciated!
Just adding more info - MacBookPro running 10.5.8 and using Safari as the browser. The problem comes and goes - sometimes the linked Word files will open OK, n others its just a strring of crazy characters...
Maybe you are looking for
-
could someone tell me the voltage & amperage on the ac adapter for this external hard drive ?
-
I've been using Flash lightly for litlle less than a year now, and I'm working on creating a gallery for my portfolio site. I have thumbnails of all my work. I've turned them into button and made it so when you rollover it, a larger preview of it app
-
Colleague can't open my Logic Pro 8 files
Hello out there I hope you will understand my english. I got a huge problem - I'm a musician, recording selfwritten songs at home and taking them on an external hard drive to the studio, where a producer does the last changes to it. I'm working with
-
All, Short question. We need to deploy the SCCM (2012R2) agent to 1000+ Windows 2003 servers with BITS 2.0 installed. What is the standard way to deploy BITS 2.5 on those systems. I figured out that 2.5 cannot be pushed with WSUS and since there is n
-
How many bits (64 or 32) has the macbook pro 13" 2012
I am new to mac and I would likie to know how many bit it has because i want to run adobe after effect thanks ! mathieu