Problem with replacement of index series, change of base year

Hi Experts!
I try to explain my problem in Real Estate.
In Italy from January 2011 the baseline (base year) national index of consumer prices for the entire community (NIC) and national consumer price index for families of workers and employees (CPI) moved from 1995 to 2010.
So, I have to change the base year of index in Rent Adjustment.
I think I have changed the base year from 1995 to 2010.
(Path: Real Estate>Rent Adjustment>Index>Replacement of index series, change of base year)
In table TIVAJINDXCON (previous was empty) now there is this record:
SERIESTO: 08000
BASEYEARTO: 1995
SERIESFROM: 08000
BASEYEARFROM: 2010
CHAINDATE: 31.12.2010
INDEXBASETO: 1,373
But with transaction FOA0 it seems that the rent adjustment still consider 1995 as base year instead of 2010.
I have to set the SAP application as to use 2010 as new base year instead of 1995.
Would you please forward me with any support.
Best regards,
Thank you.
Tania

My question has been answered by SAP.

Similar Messages

HT5622 Due to problems with my original email I changed my apple id email and password months ago. Suddenly it is reverting to my old email. How do I get it to totally forget the original? I have iPhone, iPad and MacBook Pro.

Due to problems with my original email I changed my apple id email and password months ago. Suddenly it is reverting to my old email. How do I get it to totally forget the original? I have iPhone, iPad and MacBook Pro.

Hey 1Jerry,
Thanks for the question. You'll want to delete and re-add your iCloud account (utilizing the new Apple ID address). When prompted, opt to keep as much information on your device as possible. The following article provides information on how to do so:
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Turn off iCloud completely
Depending on whether you want to stop using iCloud on all or only some devices, do one or more of the following:
On your iOS device’s Home screen, tap Settings > iCloud, then at the bottom of the screen, tap Delete Account.
Thanks,
Matt M.

Problems with Zen Vision M Series Media Explorer using 32-bit Vista Home Prem

I'm currently experiences problems with Zen Vision M Series Media Explorer using 32-bit Vista Home Premium. When i'm trying?to burn CD's onto my Zen after?I burn the first one then click to burn another it freezes. Is there any patches i should be downloading to solve this problem??Can anyone help? Please!!!!!!!!
?Message Edited by studandydon on 07-29-20070:38 AM

I have the same problem. It all started yesterday when I was installing the cd drivers in my new computer. I have searched numerous forums and some people had to return the product. Please admins help on this issue as I understand it is very serious.

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted??

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted? Maybe Itunes thought that I was someone trying to copy my old podcast because I kept the same name, I tried to change the names but it looks like I'm on a blocked list...

There is a procedure for changing the feed URL for a podcast, which it seems you haven't followed: you have to add a special tag to the old feed - just submitting a new feed will have exactly the effect you describe. The proper method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move

HT202159 I bought the UnZipper, vV1.0.00 (4+) , couldn't download (it reported an error in the end), didn't install it but still, I was charged by you. Also I can't update "The Unarchiver", could I have any problems with my Mac? It's a one-year-old Mac P

I bought the UnZipper, vV1.0.00 (4+) , couldn't download (it reported an error in the end), didn't install it but still, I was charged by you. Also I can't update "The Unarchiver", could I have any problems with my Mac? It's a one-year-old Mac Pro Laptop. Could you help me please?

Check under App Store/Purchases for your purchase. Install it from there again. ... Hopefully you did buy this from Apple's App Store, right!

I bought the UnZipper, vV1.0.00 (4 ) , couldn't download (it reported an error in the end), didn't install it but still, I was charged. Also I can't update "The Unarchiver", could I have any problems with my Mac? It's a one-year-old Mac Pro Laptop

I bought the UnZipper, vV1.0.00 (4+) , couldn't download (it reported an error in the end), didn't install it but still, I was charged. Also I can't update "The Unarchiver", could I have any problems with my Mac? It's a one-year-old Mac Pro Laptop. Could you help me please?
Mac Pro, Mac OS X (10.6.8)

Check under App Store/Purchases for your purchase. Install it from there again. ... Hopefully you did buy this from Apple's App Store, right!

It's happened again! Problem with replacement screen (mysterious dark O ring in the centre)

I had my screen replaced for a dark O ring appearing in the centre about half a year ago. It must be caused by the apple logo on the reverse.
It's now starting to happen again and my 3 year applecare has run out
What can I do? Does a new screen come with a guarantee of any kind?
Serial is W89471B364B

Welcome to the forum!
This has been a fairly common problem with Z series units, and the cure is LCD replacement.
Brand new LCDs change hands for under $200 on eBay. If you are handy and careful enough, replacing the LCD isn't that much of a problem.
Hope this helps and good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Problem with navigation and masthead by changing languages with Anonymous

Hi All,
i have a problem with navigation and masthead by changin the language when accessing as anonymous user.
Ive created two additional users anon_de (with language german )and anon_en (for english).
I've created also two links in the in masthead:
/irj/portal/anonymous?guest_user=anon_en and /irj/portal/anonymous?guest_user=anon_de
When i choose "de" for the first time it works fine, but when i choose "en" again the language in the content are is changing to english again, but not in navigation and masthead. When i click again on link for "en" the languge is set to english. Strange thing is that when i click on "de" instead the portal content change to german but masthead and navigation are in english now, as it should be before....
It seems that masthead and navigation have always prevoius language selected.
Do you know, what could be the reason of that strange behavior?
Thanks for help
Karol

Hi Detlev,
you are right. the user is not "updated" fast enough... the strange thing is, that it works by the first time i change the language...
well.. i can implement that workaround as you suposed, but it would be a really workaround as the same page will be requestes second time, causing requests number to be double..
Thanks for help
ps. i forgot to mark this message as question to give points.. if you tell me how i can change that ill reward your answer..

Problem with cvdm-csm-1.1 change default slot in configuration

Hello
I've got problem with this software. On my router 7606 I have install csm on module number 3. After installing software in router I get message No CSM in slot-1. Where can I change configuration this software to get information for slot-3 ?
Thanks for advice.
Marcin

Hi Jayan,
Our PI alert configuration is fine. And also we did not choose multiple suppress method. Problem is with Solution Manager CCMS PI alert configuration for failed RWB count. After initil alert and then nomore alerts are triggered. If I complete the alert then again only first alert is triggered and again no alerts going forward. Please advice.
Thanks,
Kavitha Rajan.

Problem with viewing the tv series "Gurren Lagann" in itunes.

When I go to the itunes store and search gurren lagann the page loads fine but when I try to view the complete series itunes stops working. This problem happens with different accounts and on different computers.
the itunes verson that is currently on my inspiron computer is 9.0.3.15
is this a problem with itunes or is it a problem with my computers/accounts?

Fault Module Name: WebKit.dll
Fault Module Version: 5.31.21.8
That's the rendering engine iTunes uses to display the Store contents.
There's a newer version of webkit.dll in the most recent version of Apple Application Support (version 1.4.1 as I write this post). To update your Apple Application Support, the most straightforward procedure would be updating to iTunes 10.1.1.4 ... but if you're not keen on that, we could do it by updating your QuickTime to version 7.6.9 (there's a version 1.4.1 for Apple Application Support in the QuickTime 7.6.9 installer).
If you want to go the QuickTime-update route, here's a link to the download page for QuickTime installers. (Get the installer that doesn't mention QuickTime ... the installer file should be called "QuickTimeInstaller.exe" rather than "iTunesSetup.exe" or "iTunes64Setup.exe".)
http://www.apple.com/quicktime/download/
... does your iTunes behave better with the newer version of webkit.dll in place?

Problems with the display when I change the view

Hi,
I have recently downloaded th emost up to dat everion of itunes and I have a problem when I change the view. All I get is a black screen down the right hand side where the library details sit. This eventually clears but is **** annoying. It also happened when I had version V7.01 running.
Any ideas?
Thanks,
Fujitsu Siemens MS 6567V2 Windows XP

Helpful AnswerRe: Have anyone problems with the dock? when I start the imac it doesn't appears
27-jun-2011 15:58 (in response to pocoto)
If you run Parallels, this is one of the symptoms of this issue:
http://kb.parallels.com/en/111541
Regards,
Captfred
Like (0) Reply
Captfred post me this page, follow the instrutions on parallels preferences and for me it works. Try it and let us knows if it's works for u too..Regards

Problem with Restricted Recruiter Requisition Status Change Approval Proces

Hello,
Our company is having a problem with Recruiters recieving any approval notifications for requisitions where the status change is performed by someone logged on as a Restricted Recruiter. The approval notification never appears in the Recruiters approval page. The Restricted Recruiter is able to submit the request without any problems.
I was hoping that someone could help point me in the right direction so that I may begin troubleshooting this.
Thanks for your assistance.
Ryan

I have been doing some digging on this matter on E-Recruiting workflow and have discovered transaction SWI2_FREQ (Work Items per Task), very useful. Upon running this utility I found 8 pending approval request tasks. I double clicked on the task to show the workflow status of each task.
I double clicked on one of the request for status change tasks for a requisition which took me to the approval request for status change of Req ########. Here I clicked on the activities tab selected the activities tab, selected the activity Approval request for status change of Requisition ######## then clicked on the execute icon.
Doing this opened up a new web browser and prompted me to login. Using the correct login credentials for this environment I click the login button and promptly recieve the error message...
Error in Web service execution
E:SWF_HTTP:050 TS51807979
At this point I am unsure of where to go...
Any help would be appreciated.
Ryan

TileList problem with effects - 'RangeError: Index '8′ specified is out of bounds.' error.

Flex 3.0 beta TileList problem with effects
I have a problem with deleting item from a Flex 3.0 beta
TileList component. While a delete item effect is playing and I
delete another item (while the first effect is still playing) , I
get an ‘RangeError: Index ‘8′ specified is out of
bounds.’ error. How do you delay processing until the effects
are done? or is there another solution? do I use a callLater()? or
remove the eventListener and wait until the effect finishes?
To see the problem, hit the down error twice quickly.
To see the application ->
http://designwithflex.com/pics/fasterror.swf
Here is Thumbnail.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:mx="
http://www.adobe.com/2006/mxml"
width="100" height="100">
<mx:Label text="{data.name}" />
<mx:Label text="{data.age}" />
</mx:VBox>
and here is main.mxml:

luvgelato,
Can you please file a bug at
http://bugs.adobe.com/flex/
and attach all your MXML code.
Thanks,
Peter

Problem with bitmap partitioned index

My order table (3.6 M rows) has got 4 partitions (one per year). I've defined 24 LOCAL BITMAP INDEXES on the data (DSS environment); every index is built on one column.
The cardinality of these columns is quite various (from 10% to 80%) - I know in some case the use of bitmap index is not OK -.
The table is manipulated in this way:
- Nightly it has about 5K new rows inserted.
- All of this rows have update after insertion (only some of this update are referred to indexed column).
- Early in the morning the partition table referred to actual data, is analyzed with COMPUTE STATISTICS option.
- During the day the data are queried thousand times.
The problem is:
1. Before table/index partitioning all the indexes of the table were BITMAP too, and their size were acceptable; these size did not grow up to much during the time. We use to rebuild index once at 2-3 months.
2. After table/index partitioning some of the bitmap indexes related to the partition that contain actual data, get poor in few days. Their size grow up very quickly (about 16mb at day) and they can allocate 100 times more space than before partitioning. So, I must rebuild these indexes / partitions once at 2-3 days. I have checked the distinct values of poor indexes column, and there is not correlation between cardinality and growth (I mean, this problem happens on index with low cardinality as well as high cardinality).
3. I have the same order table in another schema with the same indexes and similar number of rows (1.7 M). Any of these indexes have strange growth. (I.E.: size of index on AGENT column is normally 2Mb; the poor index is about 200Mb after 4 work days).
We work with 8.1.7.2 on Windows 2000.
Does anyone have any idea about my problem?
Thanks in advance L.

Nirpol wrote:
I create 2 different bitmap join index:
CREATE BITMAP INDEX lsa.AAB_V_ARTICOLO_MARCA_IDX ON LSA.AAB_VENDUTO(MARCA)
FROM LSA.AAB_VENDUTO vv, LSA.AAB_ARTICOLO aa WHERE vv.articolo_id=aa.articolo_id;
CREATE BITMAP INDEX lsa.AAB_V_CLIENTE_TIT_STUDIO_IDX ON LSA.AAB_VENDUTO(TITOLO_STUDIO)
FROM LSA.AAB_VENDUTO vv, LSA.AAB_CLIENTE cc WHERE vv.cliente_id=cc.cliente_id;
What happens if you just create two plain bitmap indexes without the join?
CREATE BITMAP INDEX lsa.AAB_V_ARTICOLO_MARCA_IDX ON LSA.AAB_VENDUTO(MARCA);
CREATE BITMAP INDEX lsa.AAB_V_CLIENTE_TIT_STUDIO_IDX ON LSA.AAB_VENDUTO(TITOLO_STUDIO) ;You can also go with normal indexes on the FK rows (cliente_id) and the optimizer can do a bitmap conversion from normal index to bitmap index if needed. Are the column values evenly distributed? If not you might need to go for some column histogram. but I don't have the impression that this is really useful in your case.

Problem with BI-IP and Offsets in Fiscal Period/Year

Hi freinds,
I got a request that is linked to BI-IP and Query design.
The request is that the users should always see a complete year by Fiscal Periods (001.2010...012.2010).
Now the BI-IP should be dynamic. This means in 007.2010 the user should plan 008.2010...012.2010, the previous month are supposed to be the actuals.
Problem: I do not want to change the query each month in order to move the planning month. I tried to use an offset with 11 month actuals. Saying "current month/Year", -1,-2,...,-11 using 11 restricted key figures. Same I did for the planning month. I now limited the Data to 2010 in the filter and anywhere I could. However, the result columns are showing all 22 Month. 001.2010...007.2010 are the only once which carry data. all other columns are empty.
I just do not want to see the columns that do not belong to the current year.
Any ideas or How to's I can use?
Thanx and best regards
Joerg

Sorry, but I can't imagine how that should work.
I have two Cubes combined under a Multicube. One containing the Actuals and one for the Forecasts. To show the actuals I have to create a restricted key figure that shows the actuals and for the forecast I have to select differently.
What is the exit variable supposed to do? I could use a SAP Provided variable to find out about the first month and the actual month, but since it will be a restricted keyfigure it will be shown as sum between the two month. I need for each month of the year a column, and the "open" Month should be input ready. And this should be dynamic.
Thanks for helping
Joerg

Problem with replacement of index series, change of base year

Similar Messages

Maybe you are looking for