Problem with Report Builder 10g

Dear Members,
I am using Oracle Report Builder 10.1.2.0.2 for developing reports.
I see that the option "Find and Replace in PL/SQL" in the EDIT Menu is Greyed out completely. This is a great feature which enables me to find the pl/sql code in various program units we have.
Do we have a patch for this?
We are using Oracle Applications R12.
Thanks
Sandeep

Since in Forms you can search in PL/SQL when no editor is open I would love to have this functionality here too.
Regards
Markus

Similar Messages

Oracle database 10g connectivity problem with Report Builder

Hi,
I need to amend a .rdf report and am using the dev10g. I can't connect the test database from report builder.
It is getting the error like :
"ORA-12154 : TNS: could not resolve service name".
I can connect the database from sql*plus, Toad etc. Also It's giving me the response when I run the TNSPING command with the database name.
Could someone advise me that how can I resolve this problem?
Thanks,

set the TNS_ADMIN variable point to the correct tnsnames.ora file
or try the note mentioned in http://www.alexyscorp.com/products.htm
Lastly try opening a command line/dos prompt, set the TNS_ADMIN variablea and start the reports builder from commandline
Rajesh

Problems with report builder 3.0 in SCCM 2012 R2 CU2

Hi All
I have problems with editing (Using Report builder) existing reports or creating new ones in SCCM 2012 R2 CU2
We version of SQL we use is SQL 2008 R2 SP2
I already asked this question in the SCCM 2012 forum but the problem is not related to SCCM but has something to do with application report builder
I changed the registry key and edited the Microsoft.ConfigurationManagement.exe.config.xml as described in the following link
http://blogs.technet.com/b/smartinez/archive/2012/07/03/system-center-2012-configuration-manager-create-report-don-t-work-what-do-i-do-now.aspx
Afterwards I try to edit an report I see report builder is being downloaded and after it generates the following error “Application did not succeed. Unable to continue”
Error details are
Following errors were detected during this operation.
* [22-7-2014 13:55:07] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
at System.Deployment.Application.ComponentVerifier.VerifyComponents()
at
System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions
options)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
And in the SmsAdminUI.log I noticed the following error
[16, PID:4460][07/21/2014 14:11:43] :[ReportProxy] - User-specified default Reporting Point [Server1.local.nl] could not be found, [Server2.local.nl] is now the default Reporting Point.
[1, PID:4460][07/21/2014 14:11:11] :System.InvalidOperationException\r\nThere is an error in XML document (1, 1).\r\n at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
I removed the reporting point no luck -> I already installed report builder 3.0 local on my computer still no luck.
I hope someone can give me some advice , I am lost with this error
Thx in advance
Regards
Johan

Hi Miss Katherine,
1. I went through the SQL steps in the link you posted
2. I updated the Reg Key and Microsoft.ConfigurationManagement.exe.config file with 3.0 on both the
server and the console machine.
3. I copied the .DLL file from your OneDrive and replaced the existing one on the server.
4. I uninstalled and re-installed the reporting role on the server and received the 1015 in the log.
5. I restarted the server and the client machine
I do get a slightly different error now after using the new DLL
Errors With Original DLL
ERROR DETAILS
* [9/30/2014 8:42:03 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.DeploymentERROR DETAILS
Errors With New DLL
ERROR DETAILS
Following errors were detected during this operation.
* [9/30/2014 9:17:13 AM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
- Reference in the manifest does not match the identity of the downloaded assembly Microsoft.DataWarehouse.dll.
- Source: System.Deployment

Connectivity problem with Report Build 6.0

Symptom :
When I'm starting a report with Forms the Report backgroud dialog box freeze and nothing is printed.
Environment :
Server : Oracle database (v 8.0.3.0.6) on Novell Netware 5.
Client : Developer 2000 (Report Builder v 6.0.5.2.8.0) on Windows98.
Actions :
- I've tried to recompil a report file but when I'm connect to Report Builder, it freeze too (without message).
- I've attempted to recompil a Forms with Forms Builder. No Problem : I can connect to database (how it's possible ?).
- I've checked my connectivity with PING and TNSPING : Ok, the network connection seem correct.
- In log file SQLNET.LOG There's 3 error messanges. In order :
1. ORA-12203 -> "TNS : Unable to connect to destination". But I can connect to database with Forms.
2. ORA-12560 -> "TNS : Protocol adapter error".
3. ORA-00102 -> "Network protocol cannot be used by the dispatchers".
It's very strange.
Thank you for your precious help.
null

Hallo Prapanch,
thanks a lot, this one functioned well:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Normale Tabelle";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Upgrade..................[MGT-MRS-01]
From.................[6.0.6.3368.34]
To...................[6.0.6.3368.35]
I've already upgraded to 6.1.1.
[pnadmin]$ version
6.1.1 (3445) 38
Though, i have a actual system now.
Thank you for your time and support!
Elke

Problems with Reports Builder 6.0 (production)

Dear list,
'Reports builder' 6.0 is not behaving well on my office machine.
There are several anomalies:
1) Only the 'Window' is available. No 'File' menu etc.
2) When I change to 'Layout model' in Live preview, the whole
shebang goes down in flames (Dr. Watson etc)
3) I'm unable to save the reports definition
All in all: pretty unusable.
I've tried about everything to remedy this: reinstalling all
Oracle software (Server 8.0.5, Application Server 4.07,
Developer), and recently when I changed to a new machine I even
reinstalled NT (vanilla NT Workstation 4.0 english, SP3). There's
nothing special on this machine, and this happens on a totally
fresh installation.
I have to mention that the software has been downloaded from
Technet. On my home office machine it works well though, with
none of the anomalies mentioned above.
I'm at loss on what to try next. Any suggestions?
t
null

U Have to prepare the tnsname.ora file (ora_home\net80\admin\tnsname.ora)with the correct Ip-Adress an DB-Alias.
U can open this file with the standard texteditor or u can configure the tnsname.ora by using "Net8 Config".
This is a oracle program that will installed by NET 8 Client software.
success
udo

Generating barcode with Report Builder 10g

Hello,
I am migrating a number of reports from 6i to 10g which contain barcodes. These get displayed as a series of *** at the client browser.
So I guess I may need to install the barcode javabean. So I am using the instructions http://download.oracle.com/docs/html/B13895_01/orbr_barcode.htm. Unfortunately I am stuck on the first step of importing the java class oracle.apps.barcode.util.BarCodeConstants. I have tried adding the path for oraclebarcode.jar to my registry but it doesn't help. Should I be seeing ".apps" below the oracle class?
Thanks in advance

Hi DC or user638801 ,
Did you ever try this on UNIX server. Coz I tried this before 3 weeks. But this did not work.
If this works in UNIX Server please let me know so that I will try once again.
Thanks and regards,

[b]Problems to Print a Report made it with Report Builder Dev. 2k[/b]

I have a report made it with Report Builder and in the screen preview all the information is complete and fine; however when I print it, some letters disappear on the left side of the fiel. I don't know How to correct this. I tried with the properties that allows to fields
expand them in an horizontal and vertical way. But it doesn't work. How can I get a WYSWYG ("What you see What you get") in a print form?... Could be possible
that it is a Report Builder bug and How I can correct this? or maybe I'm creating the reports in a wrong way... I need help...
Thank you very much

Godis-Tei wrote:
Hi Forum,
Thanks for the various contributions that are helping my experience with oracle.These are my two current problems:
1. Assuming I have built a page of payroll for 40 workers that repeats monthly. Is there a way of copying the previous page for last month into this month? Or, do I have to build a new page on the same table and update it?
2. Please, what procedure should I follow to print a form or a report from the application page?Please ask only ONE question per thread. These issues do not appear to be related in any way, so so the thread is likely to end up an unmanageable, confusing mess.
Close this thread and open 2 new ones, one for each question.

Report Builder 10g problem

I already create my report by using report builder 10g then I run it and its ok after that I tried to make some modification on that report and I Compile it(ctrl+shift+k) and Generate it(ctrl+t) the I saved it as RDF file but when i run it the modification which i made it didn't show on the report i dont know why?
any body has idea in this
plz help me..
Regards
Rahma Al-Saadi

Probably you might have old .rep file in your directory. You can create .rep file of you modified rdf file by opening it in builder and pressing Ctrl+T.
This is a Forms forum , you can post in Reports for better replies.

ORACLE reports Build 10g - Data Model - query - If statement in Alias ?

I have the following select statement. It has the alias Survivors, Deaths and "All
With the ORACLE reports Build 10g - Data Model - I have the following query statement. I require the alias to change. Can the following be done.
Cases". Is it posible to use :P_LANGUAGE variable to say that -- IF :P_LANGUAGE = FRENCH THEN alias are Survivants for survivors, Décès for Deaths, Tous_les_cas for All Cases. Please advise
SELECT ALL T_NTR_MULTIBAR.CAT, T_NTR_MULTIBAR.NUM_CASES_LEFTBAR AS Survivors,
T_NTR_MULTIBAR.NUM_CASES_MIDDLEBAR AS Deaths, T_NTR_MULTIBAR.NUM_CASES_RIGHTBAR AS "All Cases"
FROM T_NTR_MULTIBAR
WHERE INSTANCE_NUM = :P_INSTANCENUM
order by ORDERS

It is no problem, you can automatically change the complete query before the report is running, which delivers you different kind of values. But the alias names does not change in the group of the data-model, although two query are running with different alias names at different times. In the data model you see the alias names of the first implemented select statement, which are the column fields in the layout.

DDE in report builder 10g

Hi,
I use this code in form 10g to edit a ms word and its work properly:
DECLARE
APPID PLS_INTEGER;
CONVID PLS_INTEGER;
DOCID PLS_INTEGER;
SYS_DATE CHAR(8);
BEGIN
SELECT TO_CHAR(SYSDATE,'MM/DD/YY') INTO SYS_DATE FROM DUAL;
APPID := DDE.APP_BEGIN('C:\Program Files\Microsoft Office\Office12\WINWORD.EXE',
DDE.APP_MODE_MINIMIZED);
CONVID := DDE.INITIATE('WINWORD','SYSTEM');
DDE.EXECUTE(CONVID,'[FileOpen "c:\bin_test\exp.dotx"]', 10000);
DOCID := DDE.INITIATE('WINWORD','c:\bin_test\exp.dotx');
DDE.POKE(DOCID,'BOOKMARK1', SYS_DATE,DDE.CF_TEXT,10000);
DDE.EXECUTE(DOCID,'[FileSaveAs "c:\bin_test\output.doc"]', 10000);
DDE.TERMINATE(CONVID);
END;
when I put this code in the afterreport trigger in report builder 10g and call the report;
a blank document word is opened withoud any changes as well as the report result in pdf format.
what can i do to let this code work in report builder??
best regards,
Ahmad

By all means feel free to post your question as often as you like!
In webforms DDE runs on the middle tier; it might do what you want against your local OC4J now, but it surely won't open a thing when you run it against an application server.
Maybe you should enlighten us with your requirement, maybe there is a better solution for your problem.
cheers

Pdf file view in report builder 10g

I store pdf file in database 10g using webutil_doc form ,now I need to view this file in report builder 10g is it possible

By all means feel free to post your question as often as you like!
In webforms DDE runs on the middle tier; it might do what you want against your local OC4J now, but it surely won't open a thing when you run it against an application server.
Maybe you should enlighten us with your requirement, maybe there is a better solution for your problem.
cheers

Displaying Japanese Fonts on Report Builder 10g in PDF format.

Hi,
In one of my Report .I am using Japanese characters.All the contents are static data. If I run from Report builder it gives me perfect result and If I am trying to get output in PDF format from Report builder, I all the Japanese characters changed to some different fonts characters. Same problem with Report Server.
Thanks in Advance
I appreciate your Help.

Hi,
Try using the 'PDF Subsetting' feature.Go through the Chapter-Using PDF in Oracle Reports in "Oracle Application Server Reports Services Publishing Reports to the Web" - http://www.oracle.com/technology/documentation/reports.html.
Hope this will help you.
Thanks,
Vidya

Dynamic Order By on Report Builder 10g

Hi,
How can I do a dynamic order by clause using user parameters on Report Builder 10g? I need to set dynamically the column and the direction on the clause.
Thanks.
Bruno Galletti
Brazil.

Hi Bruno / Rainer,
I am implementing the same solution, and after adding the lexical parameter reference in the SQL statement and calling the report from Oracle Forms the report failed with the following error on the report server:
Terminated with error: <br>REP-300: missing expression select wcsr_no , wcsr_date , wcsr_rec_week_zone , wcsr_loc_house_num || ' ' || wcsr_loc_pre_dir || ' ' || wcsr_loc_street_name || ' ' || wcsr_loc_street_type || ' ' || wcsr_loc_post_dir || ' ' || wcsr_loc_unit || ' ' || wcsr_loc_city || ' ' || wcsr ==>
No change has been done to the SQL statement except adding the &p_orderby parameter at the end of the query.
Any suggestions? Are all parameters defined as "bind" parameters on the Repotr Object Navigator.?
Thanks
Gabriel Aguirre
[email protected]

Using DDE package in report builder 10g

Hi,
I use this code in form 10g to edit a ms word and its work properly:
DECLARE
APPID PLS_INTEGER;
CONVID PLS_INTEGER;
DOCID PLS_INTEGER;
SYS_DATE CHAR(8);
BEGIN
SELECT TO_CHAR(SYSDATE,'MM/DD/YY') INTO SYS_DATE FROM DUAL;
APPID := DDE.APP_BEGIN('C:\Program Files\Microsoft Office\Office12\WINWORD.EXE',
DDE.APP_MODE_MINIMIZED);
CONVID := DDE.INITIATE('WINWORD','SYSTEM');
DDE.EXECUTE(CONVID,'[FileOpen "c:\bin_test\exp.dotx"]', 10000);
DOCID := DDE.INITIATE('WINWORD','c:\bin_test\exp.dotx');
DDE.POKE(DOCID,'BOOKMARK1', SYS_DATE,DDE.CF_TEXT,10000);
DDE.EXECUTE(DOCID,'[FileSaveAs "c:\bin_test\output.doc"]', 10000);
DDE.TERMINATE(CONVID);
END;
when I put this code in the afterreport trigger in report builder 10g and call the report from form;
a blank document word is opened withoud any changes as well as the report result in pdf format.
what can i do to let this code work in report builder??
best regards,
Ahmad

I use this code in form 10g to edit a ms word and its work properlyI very much doubt that. Calling DDE from Forms this way would result in trying to open Word on the <b>server</b>.
the report result in pdf formatThe report result format is determined by how it is called. Looks like you call it with desformat=pdf.

Cfreport cutting off lines on multiple pages created with report builder

I have a report built with report builder and it appears that if you set the body to "stretch with overflow" that cfreport will "cut off" a line or two every time it paginates see attached for a simplified version of the report, I have removed all but the body on this (actual report has a watermark, report header, page header and page footer ...the problem is pretty apparnt with this scaled down version as you can see it's missing text from one page to the next ..any ideas/suggestions/known bug?? You can see a sample of the issue here: http://www.arroyoc.com/onlybody.pdf

Hi Helen,
As per my understanding, I think this issue is caused by width size is not appropriate in the report. To narrow down this issue, please make sure that Body Width + Left margin + Right margin <= (Page width).
If the tablix is a matrix, because of the column group can expand to multiple columns, we should according to the following rule:
Body Width + Extra expanded column width + Left margin + Right margin <= (Page width).
Besides, please make sure there are no extra page breaks before each “R”. To check whether the issue is caused by the letter “R”, we can try to use another field to replace the Company Name field.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Problem with Report Builder 10g

Similar Messages

Maybe you are looking for