Problem with Report on Multiprovider

Hi All,
I am getting key fig value more than the expected value in the report output, Report is on Multiprovider, I have checked in to cubes, values in the cubes and reports are same,
I have checked in TR and UR there is no routines, But Data source is enhanced in the R/3 and extracting the data to BW.
How to find why we are getting more values in the report :?:
Plz give some inputs to solve this problem.
Thanks
Sreeu

Hi
I have checked data in the Multiprovider, In the MP contain KF (No of days) values high (more then 365 days), thats the reason am getting KF values high in the report,
Actually report is used for analyzing the Premise (Char) values w, r to Number of days for one fiscal year, but report is showing Number of days more than the 365 days on one fiscal year .
Can any one plz advice why we are getting No .of days more then 365 days?
Thanks
Sreenu

Similar Messages

Problems with report builder 3.0 in SCCM 2012 R2 CU2

Hi All
I have problems with editing (Using Report builder) existing reports or creating new ones in SCCM 2012 R2 CU2
We version of SQL we use is SQL 2008 R2 SP2
I already asked this question in the SCCM 2012 forum but the problem is not related to SCCM but has something to do with application report builder
I changed the registry key and edited the Microsoft.ConfigurationManagement.exe.config.xml as described in the following link
http://blogs.technet.com/b/smartinez/archive/2012/07/03/system-center-2012-configuration-manager-create-report-don-t-work-what-do-i-do-now.aspx
Afterwards I try to edit an report I see report builder is being downloaded and after it generates the following error “Application did not succeed. Unable to continue”
Error details are
Following errors were detected during this operation.
* [22-7-2014 13:55:07] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
at System.Deployment.Application.ComponentVerifier.VerifyComponents()
at
System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions
options)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
And in the SmsAdminUI.log I noticed the following error
[16, PID:4460][07/21/2014 14:11:43] :[ReportProxy] - User-specified default Reporting Point [Server1.local.nl] could not be found, [Server2.local.nl] is now the default Reporting Point.
[1, PID:4460][07/21/2014 14:11:11] :System.InvalidOperationException\r\nThere is an error in XML document (1, 1).\r\n at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
I removed the reporting point no luck -> I already installed report builder 3.0 local on my computer still no luck.
I hope someone can give me some advice , I am lost with this error
Thx in advance
Regards
Johan

Hi Miss Katherine,
1. I went through the SQL steps in the link you posted
2. I updated the Reg Key and Microsoft.ConfigurationManagement.exe.config file with 3.0 on both the
server and the console machine.
3. I copied the .DLL file from your OneDrive and replaced the existing one on the server.
4. I uninstalled and re-installed the reporting role on the server and received the 1015 in the log.
5. I restarted the server and the client machine
I do get a slightly different error now after using the new DLL
Errors With Original DLL
ERROR DETAILS
* [9/30/2014 8:42:03 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.DeploymentERROR DETAILS
Errors With New DLL
ERROR DETAILS
Following errors were detected during this operation.
* [9/30/2014 9:17:13 AM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
- Reference in the manifest does not match the identity of the downloaded assembly Microsoft.DataWarehouse.dll.
- Source: System.Deployment

Problems with reports and XML-publisher - No XML

Hi!
I'm having a problem with Apps and XML-publisher. I made a report file, which queries some views. When executing in reports, I get all the data I expect.
Now, when I upload the reportfile to Apps and let it generate XML, my xml-file is empty (well, almost empty)
<?xml version="1.0" ?>

<T03501684>
<LIST_G_PERSOON>
<LIST_G_PERSOON />
</T03501684>
Anyone who can shed any light upon this problem?

OK, finally solved the problem... A good night's sleep always helps ;).
After just trying each queried table one after an other, I found the problem:
The difference between Oracle Apps (Dutch locale) and the reports builder (English) is the language... And our functional people have changed some names, but the Dutch ones, leaving the english names in place and one of the tables I query has language specific data, which is also appears in a where clause.

VAT declaration in XML - Problem with report RFASLDPC

Hello all,
I have a problem with the report RFASLDPC. We use it to download an XML file that we generated which contains the VAT declaration.
In the report RFASDLPC, there is a FORM named QUELLFILE_PRUEFEN which stop the report and display a message : "Data file FILE_NAME is not correct".
The reason is that QUELLFILE_PRUEFEN checks (for Belgium) that the beginning of my document starts with '000000' (six times zero). But this is impossible for an XML file to begin with '000000'. An XML file must begin with "<?xml version="1.0" ?>" or a least "<".
Here is the code :
FORM QUELLFILE_PRUEFEN.
OPEN DATASET PAR_PATH FOR INPUT IN BINARY MODE.
IF SY-SUBRC NE 0.
    MESSAGE E306 WITH PAR_PATH.        ''Quellfile nicht vorhanden
ENDIF.
READ DATASET PAR_PATH INTO HLP_RECORD.
CASE PAR_FTYP.
    WHEN 'AT'.                         ''ASL Österreich
      IF HLP_RECORD(1) NE 'I' OR HLP_RECORD+46(2) NE 'ZM'.
        MESSAGE A185(FR) WITH PAR_PATH.
      ENDIF.
    WHEN 'BE'.                         ''ASL Belgien
      IF HLP_RECORD(6) NE '000000'.
        MESSAGE A185(FR) WITH PAR_PATH.
      ENDIF.
    WHEN 'ES'.                         ''ASL Spanien
*     IF HLP_RECORD(1) NE '1' OR HLP_RECORD+104(3) NE '349'.
      IF HLP_RECORD(1) NE '1' OR HLP_RECORD+1(3) NE '349'.
        MESSAGE A185(FR) WITH PAR_PATH.
      ENDIF.
    when 'FI'.
      if hlp_record(3) ne '000'.
        MESSAGE A185(FR) WITH PAR_PATH.
      ENDIF.
ENDCASE.
CLOSE DATASET PAR_PATH.
The line :
READ DATASET PAR_PATH INTO HLP_RECORD.
Put the 128 first character of the XML file in HLP_RECORD because HLP_RECORD is defined as :
HLP_RECORD(128) TYPE C
So as I work in Belgium, it is the condition :
WHEN 'BE'.                         ''ASL Belgien
      IF HLP_RECORD(6) NE '000000'.
        MESSAGE A185(FR) WITH PAR_PATH.
      ENDIF.
which is checked. But this condition cleary check if the beginning of the XML is '000000' and if it is not, it stop the program.
I searched for all the SAP notes about RFASLDPC but I found none about this problem.
Did someone else have also this problem ? Did you find a way to solve this ?
Thank you in advance for your help.
Best Regards.
Gregory Pierre.

anyone has an idea ? ...

Problems With Reports server in Oracle 10g IAS

I am having problems with the reports server. It keeps on giving me the error below
REP-51002: Bind to Reports Server <myreportservername> failed
I am able to correct it by restarting my server while my backup server is off the network and playing around with my server configurations. It works for a while 2 weeks to a month then I start getting the same error again.
Could someone please point out to me where I could be going wrong?
Is there any known problems when 2 IAS are on the same network. I am on Windows 2000 Server.
Thanks
Irene

In rwnetwork.conf change
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE discoveryService SYSTEM "file:/home/oas10g/frhome/reports/dtd/rwnetworkconf.dtd">
<discoveryService>

<namingService name="Cos" host="IP of ur Server" port="14021"/>
</discoveryService>
bounce OC4J_BI_Forms
run naming service.sh 14021

PFD-MAIL Problem with REPORTS 3.0.5

Hi all!
Still have a problem with creating a PDF file as mail attachement.
I installed the latest patch 11 (3.0.5.19) of the oracle runtime and i compiled
the report with the patch.
What happend: Still go the error message if i open the pdf in the mail: "operant xc missing ..."
BUT !! if I create the pdf with the option "FILE" instead of "MAIL" at e.g. c:\test.pdf - its
without any error!
So the question is what is the difference beetween the two ways?????
Have a nice weekend!
Oli

Hi all!
Still have a problem with creating a PDF file as mail attachement.
I installed the latest patch 11 (3.0.5.19) of the oracle runtime and i compiled
the report with the patch.
What happend: Still go the error message if i open the pdf in the mail: "operant xc missing ..."
BUT !! if I create the pdf with the option "FILE" instead of "MAIL" at e.g. c:\test.pdf - its
without any error!
So the question is what is the difference beetween the two ways?????
Have a nice weekend!
Oli

Problem with Report Output in Apps R12

Hi,
I am having some problems with my report output when run under Apps R12. It looks fine when I run in Reports Developer 10g.
The problem is that pages get split into two (i think because there are too many rows). So page 1 of the report will be split into two pages in the Apps report output, and the page number (which is normally at the bottom) displays on the second page as "Page 1 of xx".
I think there is some problem but I don't know what.
I am running the report as Text Output in apps, and using the default Landwide style (which is 180 col x 66 rows). In my report design, I made the dimensions of the body section to be 180 col x 66 rows as well. I also have it set to 8.5 tall x 14 inches wide.
Any suggestions?
Thanks,
Kevin

SQL> set long 1000000
SQL> set heading off
SQL> column cola format a40000
SQL> select cola from clob_dummy;
gfhjtuioep mnhjkie rt-hlospd. ngktio pokdnebtt, gkhohphpdjdbs wmqksxnd - kfnfdkdldkdkdkdkdkdkdkdkdbdsjgdvj h geg.jv ehh shgghsga wshkwlsgsdklghlahgkh lahgkas lhks kglaks gksh a
ssjfsjgskjhghsgskgkksl hgeldhldlkskhdlk dklhkdlkhlkdlhdkfhldkhkhdkhkdhkdhkdkhklhkddkhdkhdkl djhlkdkhdhkshlkd dkhdkhldsjhkslhjd eutywe 398863694 i230e ehgd ehglegighsihdlk eltiweytilhdhgehgisehbkd
SQL>Edited by: Tubby on Oct 3, 2008 11:44 AM

Problem with Reports & Graphics in PDF

Hi,
I generated a report into PDF file which contain layout for Line
Graph, but I can't get multiple colour of line for columns value.
I also have same problem with Pie Chart.Please give me some
advice.
Thanks in advance.
null

A month ago I have a problem with my pdf output because of TURKISH Characters. I applied this method as you can see below for solve this problem...
1. Go under the following path: $COMMON_TOP/util/java/1.4/j2sdk1.4.2_04/jre/lib/fonts
2. Copy all the ttf font files under <FND_TOP>/<APPLRSC>/ to that path
3. Bouns the Concurrent Manager and the Apache Server
4. Retest the issue.
5. Migrate the solution as appropriate to other environments.

Problems with Reports: REP:6205

I work with Reports Builder 9.0.4.0.21.
When I open a matrix report appears he following message:
REP-6205: el atributo de identificador de la etiqueta rw:headers no es único
(ID attribute of rw:headers is not unique)
I don´t know why, because I´ve created the roprt with the report assistant
May anyone help me?
thanks in advance
Beatriz

Hi,
I´ve read the jsp code and I´ve found some <rw:headers id, but they are different:
rw:headers id="HFPPCTRAMOEDAD35"
rw:headers id="HFNUM35"
rw:headers id="HFPORCEN35"
rw:headers id="HFINDICE35"
rw:headers id="HFSumNumPerPPCNIVEL35"
rw:headers id="HFSumPorcenPerPPCNIVEL35"
rw:headers id="HFSumIndicePerPPCNIVEL35"
What is the problem?
Thanks
Beatriz

WWI server problem with report shipping order

Hi everybody,
we have a problem with the WWI server and report shipping orders for Inbound documents (PDF):
after we created an entry in CVD1 and using buttons "Accept" and "Ship immediately" we run the report RCVDEVEN. First time we did it the WWI server started working and ended with error but assigned the correct PDF. After that, the WWI server didt start anyway.
First error message:
The description for Event ID ( 91 ) in Source ( PRD ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: PRD.
Second error message after second attempt:
The description for Event ID ( 95 ) in Source ( PRD ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 09/14/09 17:59:49 Start Function 'WWI_SERVER_INFO'
Initializing parameters
Initializing Tables
Receiving data from client
Sending data to client
Elapsed time : 0.1 sec.
OSS note 1058521 has already been found - but nothing described here is relevant for us: the RFC connection is working, the WWI monitor shows the server up and running.
Any ideas?
Thank you very much in advance and best regards,
Christoph

Hi folks,
fixed the problem myself. There have been some documents with error in the printer queue of the WWI server.
Best regards,
Christoph

Problemas with reports: REP -1247

I work with Reports Builder 9.0.4.0.21.
When I run a report appears the following message:
REP-1247: report contains uncompiled PL/SQL
I´ve created the report, compile and run ok. Then I've saved the report and when I open reports builder and try to execute the report appears the error.
What is the problem? I`ve compiled before saving the report
May anyone help me?
thanks in advance
Beatriz

I compile in pl/sql editor, and the reports run; but when I open the report again, the report is not compiled, and I go to Program->Compile->Whole, and I save the report. When I open the report again it is not compiled.
I don´t have compile option in file->administration, is it wrong?
Thanks
Beatriz

Problem with Reporting Services and CRM2011 Online

Hi, this is my issue:
I have two organizations in CRM 2011 Online and I want to create a report with Reporting Services when I create my datasource my connection string is something like this https://organization1.crm.dynamics.com but when I create a dataset with a FetchXML it
retrieve the data from organization2

Hi Diegohdztam,
According to your description, the dataset retrieve data from organization2, other than the organization1 which is already used to create a Data Source. If in this scenario, I think this issue can be caused by the organization2 also create a Data Source in
the report, then you are using it as the Data Source for the Dataset. So please double check the data sources in the report.
Besides, we can try to create a new Data Source with the New button for current Dataset to test the issue again.
The following screenshot is for your reference:|
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Problems with reports: parameter screen

I work with Reports Builder 9.0.4.0.21.
When I open some reports, the screen parameters appears with mode and orientation parameters.
I don´t want these parameters and I eliminate these parameters in screen and I saved the report, but when I open and run again the report, the parameter screen with these parameters appears again
May anyone help me?
thanks in advance
Beatriz

Open report in report builder. From report menu, Tools--> Parameter Form Builder, it will open up a window. Scroll down and see if any parameters are checked ( background color of parameter will be in black). click on parameter to uncheck. Press ok, it will open up report editor-paper parameter form. Remove everything on this parameter form (you will only see two parameter form headers, if you have already unchecked everything on the previous screen)

Problem with Report and distribution file

Hi.
I have a report that create the paycheck for my customer's employe.
My first group on the report is the email adresse of the employe, so i can cut the report end send it by mail to the said employe.
95% of the time it's working perfectly. But when i encouter a blank adresse or simply no result (no line return by the query)
then the report execute, and crash giving me this error.
access control disabled, clients can connect from any host
REP-0177: Erreur au cours de l'exécution sur serveur éloigné
Paramètre de référence 'REFADRCOU' non valide dans la liste de diffusion
Sorry i did not find the equivalent in english. It say that the email field (REFADRCOU) that i am using for the TO is invalid and make the whole report crash.
I'm not sure how i could deal with this.
I had a idea of executing the query before report, in the afterpform, and if i have no result, add a blank line with select XXX from dual for exemple so it would have at least 1 row and won't crash. but it's not very elegant.
Any idea or suggestion on how i could handle this problem.

Hi.
Thanks for answering.
I solved the problem.
First I stored the file into a string variable.
And on that variable I do
some processes. (Analyze the read
bytes and add more text to the original file)
Before I did that processes on
.Text property on the object.

Problem with reports in excel (using text_io)

we are using Report Builder 6.0.5.28.0 with Oracle9i Enterprise Edition Release 9.2.0.1.0. in a client/server evironment. I'm using 'TEXT_IO' to write the report output to a csv file.
The process runs ok but the only problem is that the first line of every page (other than the first) gets repeated.
can anyone out there tell me how to get over this problem.
Thanx in advance
Adolph

1. You first need to create a package in your report
PACKAGE conv_text IS
procedure fopen(fname varchar2);
procedure fclose(fname varchar2);
procedure fwrite_c(fname varchar2,
var_c varchar2);
procedure fline;
END;
PACKAGE BODY conv_text IS
o_file TEXT_IO.FILE_TYPE;
filename VARCHAR2(50);
procedure fopen (fname varchar2) is
begin
filename := fname;
o_file := TEXT_IO.FOPEN(filename,'W');
end;
procedure fclose (fname varchar2) is
begin
Text_IO.Fclose(o_file);
end;
procedure fwrite_c (fname varchar2, var_c varchar2) is
begin
Text_IO.Put(o_file,var_c);
end;
procedure fline is
begin
Text_IO.New_Line(o_file);
end;
2. In the "before report trigger" open the csv file (make sure the folder exists on the client m/c)
conv_text.fopen(:filename);
3. In the innermost frame(use the following,for all the fields u want in ur csv file) :
filename VARCHAR2(50);
begin
filename := :filename;
conv_text.fwrite_c(filename,:agency_name);
conv_text.fwrite_c(filename,',');
conv_text.fwrite_c(filename,:invoice_no);
conv_text.fwrite_c(filename,',');
conv_text.fline;
4. In the after report, close the file
conv_text.fclose(:filename);
good luck and let me know if get thru with the problem of the repeating record.
Adolph
[email protected]

Problem with Report on Multiprovider

Similar Messages

Maybe you are looking for