Problem with Rescue & Recovery and older version backups

I have R&R version 4.23 on a R61i running XPP. Two problems:
1) It will not recognize older version backups on external HD. Any way to retrieve a few files only from old backup?
2) How do I delete an older version backup on internal HD which is not accessible but taking up lot of space? It seems to be hidden but is there.
Thanks!

hey harryr,
could you provide a screenshot of any error that you're receiving when you tried to use the R&R ?
Curious to know, those backup that you have, was it done before upgrading to R&R v4.23 ? and if you copied the backup file from external to internal HDD, are you able to recover the backup ?
For number 2, is that backup located on the C:\ ? If it is, try changing the view to show all hidden files.
Also, do check if your system is updated too.
Latest Drivers and Software for R61>>
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67856
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Similar Messages

Problem with Rescue & Recovery

Hi!
I have a X61 running on Vista Business. I am facing 2 problems with Rescue & Recovery:
1. RR tries to run a backup on every bootup even when I schedule it to run Monthly or Never. The program appears not to register the changes to the backup schedule. I upgraded to the latest version of RR, but it didn't help. (Note: Another user posted about the same problem (http://forums.lenovo.com/lnv/board/message?board.id=Special_Interest_Utilities&thread.id=604) some months back, but his problem hasn't been solved.)
2. Whenever RR tries to perform a backup, I get this error message: "R2R.exe has encountered a problem and needs to close." I downloaded the patch KB917422 but got the following message when I ran the installation pgm: "Could not find any previously installed compliant products on the machine for installing the product."
Will greatly appreciate any advice!
Puckers

First you should try to fix the bad sectors, you can use the following command:
chkdsk c: /f /r

Sync problem with Outlook 2007 and BDS version 7.1

I upgraded from 6 to 7,1 on Blackberry Desktop Software and now get the following error when trying to USB sync. I use homail account through outlook connector.
"Unable to access local folders. If your Outlook profile uses Hotmail connector, you must create a local data store (PST) and set it as the default delivery location for the profile."
I have had no problems syncing until I upgraded to version 7.1. Is there a fix for this or how do I reinstal version 6.
Thanks in advance

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB32597 A Hotmail connector error appears when attempting to synchronize with Microsoft Outlook using the BlackBerry Desktop Software
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
As an alternative, I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem with imported pdfs from older version

I'm working in CS4. The InDesign document I'm working on was originally done in an older version of InDesign (not sure which). It contains imported pdfs that were created in CS2 and CS3. When I export to pdf the older imported pdfs don't display properly on my client's PC - the type is not there, only boxes with question marks - but the pdf looks fine on my screen. I upgraded from CS2 to CS4. The only way I've gotten around this is to export the CS4 InDesign document as an .INX file, have a friend open it up in CS3 and save down to an .INX file again, open the doc up in CS2, create the pdf from CS2, and open it in the older version of Acrobat. Then my client sees the type clearly on their PC
I'm using Suitcase (thought it was a font issue, but I don't think so now as the fix seemed to be between the CS versions.
Anyone else have this problem and/or a better solution? I'd like to be able to simply export a pdf and be done with it.
Thanks!

Thats it thank you!
There was a text wrap applied to all the graphics. its working perfectly now!!
Thank you again!!!
Sam

Please throw me a life-line: Problem with HP Recovery Manager's File backup option

Product: Pavilion g7-1070us notebook
Operating system: Window 7 64-bit
Problematic system: HP Recovery Manager (triggered by hitting F11), made by "Cyberlink"?
Error message:
The notebook crashed a few times before but I was able to restart it. Then it completely failed and simply displayed a blue-screen with blinking cursor (no error message). Hitting F8 failed to trigger the safe-mode. So I was forced to get into HP Recovery manager by F11. Before the system restore, I had to backup my personal files through the File backup option.
After scanning the computer for my slected file-types and finalizing the list of files to be backed up, it showed an error "No device is available for file backup. Make sure your removable disk is connected" while entering the third step ("Where do you want to save the backup"). This happened even though I have both blank DVD in the DVD drive and USB stick in the USB drive. And the size of the file I was trying to back up is way below 1Gb, a fraction of the storage capacity of the DVD.
I ran the Diagnostic test in BIOS and passed both the "Primary Hard Disk self test" and the Memory test.
Brief description of the issue:
I have a Pavilion g7-1070us laptop that failed to start and simply displays a blue-screen with a blinking cursor (no error message). I could NOT get into safe-mode by hitting F8, but was able to activate the “HP recovery manager” by hitting F11.
I was trying to back-up my files before triggering the system restore/Factory reset. It asked me what types of files to back-up, then scanned the computer for these files and was finalizing the files for back-up.
These first two steps went smoothly, but at the thrid step whne it asked me "Where do you want to save the backup?",
suddenly an error message showed up saying e "No device is available for file backup. Make sure your removable disckdrive is connected". But I have both a DVD sitting in the optical drive and a USB drive attached!
Can someone throw me a life-line here? If I cannot recover my files, I cannot proceed with the system restore and I am forever stuck here!! Thanks a lot!

You're very welcome.
If the hard drive and memory passed tests, then it is probably something else, but I can't say for sure.
If you can read the files using the kaspersky rescue disk then the disk is definitely fine and the recovery program is probably corrupt. If you cannot, then the disk may be wrecked.
I do not believe the recovery disks provide any opportunity for you to back up files.
Once you run the recovery disks, they wipe everything out, and rebuild the software image that came on your PC.
Paul

Problems with NiMath-library and Evaluation version

I'm evaluating Measurement Studio with the Evaluation version together with Visual Studio .NET 2003 (VC++). Always when I write a program that uses functions in the NiMath library I got problems when linking. I got the same errors when I try to build any of the including Math examples. When I'm not using functions in NiMath everything works.
Example
I create a project and add the following lines
CNiReal64Vector m_wave;
CNiMath:ineWave(m_wave, 100, 1);
When i build the following errors appears:
test error LNK2019: unresolved external symbol "public: int __thiscall NI::CniDemo::Access(void)" (?Access@CniDemo@NI@@QAEHXZ) referenced in function "public: static enum NI::MathError __cdecl NI::CNiMath::ImpulseWave(class NI::CNiScalarVector<double> &,double,int)" (?ImpulseWave@CNiMath@NI@@SA?AW4MathError@2@AAV?$CNiScalarVector@N@2@NH@Z)
test error LNK2019: unresolved external symbol "class std::auto_ptr<class NI::CniDemo> NI::global_demo" (?global_demo@NI@@3V?$auto_ptr@VCniDemo@NI@@@std@@A) referenced in function "public: static enum NI::MathError __cdecl NI::CNiMath::ImpulseWave(class NI::CNiScalarVector<double> &,double,int)" (?ImpulseWave@CNiMath@NI@@SA?AW4MathError@2@AAV?$CNiScalarVector@N@2@NH@Z)
/pek

Hello!
I couldn’t find anything reported about this on our portal but I found some similar issues that might help you out.
Things to check:
Linking directories are not set correctly. Go to Tools>>options>>directories and add all the directories for the include files and lib files. This should get your program linking up.
Have you made sure that all of the necessary .lib files are properly linked to?
In order to resolve this external symbol you will have to provide the necessary files to the linker by either listing the files in your project file list (right-click on your project in the file view and select "add files to project...") or by going into your project's settings and entering the path to the files for which to link (go to Project >> Settings..., select the Link tab, select Input from the drop-down menu, and put the paths you want to add in the Additional Library Path field).
Hope this helps!
Regards,
Jimmie A.
Applications Engineer, National Instruments
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal

Problem with bnx firmware and older uek

I am getting a kernel panic when I start Oracle ASM with my current uek, 2.6.32-300.7.1.el5uek. I want to see if the two older uek kernels installed have the same symptoms, but I've run into a different problem there. I can't get the ethernet interfaces working because the firmware file bnx2-mips-09-6.2.1a.fw is missing.
I think I need to get the matching firmware rpms installed and I can see they exist in our local yum repository:
./yum/unknown/OL5/latest/x86_64/kernel-uek-firmware-2.6.32-200.13.1.el5uek.noarch.rpm
./yum/unknown/OL5/latest/x86_64/kernel-uek-firmware-2.6.32-300.4.1.el5uek.noarch.rpm
However, I'm going in circles with yum
Here's a sample of what I've tried.
# yum list installed |grep kernel-uek
kernel-uek.x86_64 2.6.32-200.13.1.el5uek installed
kernel-uek.x86_64 2.6.32-300.4.1.el5uek installed
kernel-uek.x86_64 2.6.32-300.7.1.el5uek installed
kernel-uek-firmware.noarch 2.6.32-300.7.1.el5uek installed
kernel-uek-headers.x86_64 2.6.32-300.4.1.el5uek installed
# yum install kernel-uek-firmware-2.6.32-200.13.1.el5uek
Loaded plugins: dellsysid, rhnplugin, security
Setting up Install Process
Package matching kernel-uek-firmware-2.6.32-200.13.1.el5uek.noarch already installed. Checking for update.
Nothing to do
# rpm -qa|grep kernel-uek-firmware
kernel-uek-firmware-2.6.32-300.7.1.el5uek
# yum reinstall kernel-uek-firmware-2.6.32-200.13.1.el5uek
Loaded plugins: dellsysid, rhnplugin, security
Setting up Reinstall Process
No Match for argument: kernel-uek-firmware-2.6.32-200.13.1.el5uek
Package(s) kernel-uek-firmware-2.6.32-200.13.1.el5uek available, but not installed.
Nothing to do
# yum list available|grep kernel-uek-firmware
kernel-uek-firmware.noarch 2.6.32-300.20.1.el5uek el5_latest
What am I doing wrong? Any suggestions?

The following thread had a hint to the problem:
Latest Kernel-uek upgrade
Latest Kernel-uek upgrade
I added the following line to /etc/yum.conf and then I could run yum install kernel-uek-firmware-2.6.32-300.4.1.el5uek
installonlypkgs=kernel kernel-smp kernel-bigmem kernel-enterprise kernel-debug kernel-unsupported kernel-uek kernel-uek-firmware
But do I need to add kernel-uek-headers as well?
# rpm -qa|grep kernel-uek
kernel-uek-firmware-2.6.32-300.7.1.el5uek
kernel-uek-firmware-2.6.32-300.4.1.el5uek
kernel-uek-2.6.32-300.7.1.el5uek
kernel-uek-2.6.32-300.4.1.el5uek
kernel-uek-headers-2.6.32-300.11.1.el5uek

Problem with Rescue & Recovery partition

Hi,
I have a problem wit my Lenovo 3000 V200.
The hard drive had bad sector on the end of C partition.
So, I bought a new hard drive.
I connecter it as an external drive.
With a utility of copy partition, I copied the partition ServiceV002 from the old disk to the news disk.
I can't copy the partition C: because there are bad sector.
After, I connected the new hard drive into the laptop.
I try to boot and use Recovery System, but It doesn't work.
I have no DVD of backu, So can I do to use the partition ServiceV002 to restor my computer as a new computer
In advance, Thanks for your help

First you should try to fix the bad sectors, you can use the following command:
chkdsk c: /f /r

FTP problem with FreeBSD 8 and ProFTP version 1.3.2c

My web host just updated my server to FreeBSD 8. The FTP functionality in iWeb stopped working after the update. It appears to be a permission problem, but Transmit works flawlessly.
Any ideas as to why iWeb and my server aren't playing nice?
Thanks!
Micah
Here are the console logs:
2/11/10 4:34:06 PM iWeb[4984] [Error] PUT TRANSACTION t2 failed: Error Domain=FTPKitErrorDomain Code=2 UserInfo=0x16f9c2e0 "The operation couldn’t be completed. Could not change permissions of “feed.xml”."
2/11/10 4:34:06 PM iWeb[4984] [Error] PUT TRANSACTION t5 failed: Error Domain=FTPKitErrorDomain Code=2 UserInfo=0x16f9c2e0 "The operation couldn’t be completed. Could not change permissions of “feed.xml”."
2/11/10 4:34:06 PM iWeb[4984] [Error] FTPKit: Error Error Domain=FTPKitErrorDomain Code=2 UserInfo=0x16f9c2e0 "The operation couldn’t be completed. Could not change permissions of “feed.xml”."
2/11/10 4:34:06 PM iWeb[4984] [Error] PUT TRANSACTION t4 failed: Error Domain=FTPKitErrorDomain Code=2 UserInfo=0x15a9e2a0 "The operation couldn’t be completed. Could not change permissions of “Welcome.js”."
2/11/10 4:34:06 PM iWeb[4984] [Error] FTPKit: Error Error Domain=FTPKitErrorDomain Code=2 UserInfo=0x15a9e2a0 "The operation couldn’t be completed. Could not change permissions of “Welcome.js”."
2/11/10 4:34:07 PM iWeb[4984] [Error] PUT TRANSACTION t6 failed: Error Domain=FTPKitErrorDomain Code=2 UserInfo=0x15a9e180 "The operation couldn’t be completed. Could not change permissions of “Welcome.css”."
2/11/10 4:34:07 PM iWeb[4984] [Error] FTPKit: Error Error Domain=FTPKitErrorDomain Code=2 UserInfo=0x15a9e180 "The operation couldn’t be completed. Could not change permissions of “Welcome.css”."
2/11/10 4:34:07 PM iWeb[4984] [Error] Exception in background publish: CPMessageException: There was an error communicating with the FTP server. Try again later, or check with your service provider.
2/11/10 4:34:07 PM iWeb[4984] Publish error: There was an error communicating with the FTP server. Try again later, or check with your service provider.

Yes, I worked with my web host yesterday to try to figure it out.
Just because Transmit works that doesn't mean that I should have to settle with using it. I like using the built-in functionality in iWeb.
The odd thing is that one works and the other doesn't. Hence my question.

Having a problem with LR5 install and beta version

I uninstalled LR5 beta first, then purchased and installed LR5 on windows 7. Now when I open LR5 I only get the images I download on the beta version and not my LR4 catalogs etc. How do I get LR4 to merge into LR5 new install?

Jan, it sounds like most of your work is in your LR4 catalog? In that case, I would start Lightroom 5, go to File > Open Catalog and point to your Lightroom 4 catalog (like dj_paige said). Lightroom 5 will update your LR4 catalog. Depending on how many images are in your catalog, this could take some time.
Once your Lightroom 4 catalog is completely upgraded, decide if you want to merge your beta catalog into the upgraded catalog or not. If you do, you can do File > Import from Another Catalog and point to your Beta catalog. This will merge it into your newly-updated Lightroom 4 catalog.

HT201364 My 13 inch Macbook pro w retina will not install/download OS X Mavericks because it says I do not have the requirements in order to install it. I purchased my Mac this past month on 11/20/13 so i do not have a problem with it being an older versi

My 13 inch Macbook pro w retina will not install/download OS X Mavericks because it says I do not have the requirements in order to install it. I purchased my Mac this past month on 11/20/13 so i do not have a problem with it being an older version. Please help. This is my first computer so i dont have any experience on how to fix this.

You can't install the App Store version of Mavericks because your model needs a special version. If you ever need to reinstall it, boot into Recovery.

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

Can you install Windows 7, then revert to a backup image of Vista with Rescue & Recovery?

I have a copy of 7 I want to put on my T61. I've partitioned the OS into one partion, and the files into another.
I've made backup copies of the OS with Rescue & Recovery already, so can I install Windows 7 over Vista, then if I find I don't want to stick with it, recover back to Vista?
T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M

When you get to BOOTCAMP, that has to be changed from FAT to NTFS but you have to click Advanced Option.... button in order to change to NTFS.
The GPT error message can happen if you have more than one internal hard drive (say SSD and TB model).
If you didn't use Assistant, and some have managed, undo the partition.
Paragon CampTune $19 can also assist with installing Windows, creating the partition - but may not work with Lion, though you aren't there yet.

Problem with Rescue & Recovery and older version backups

Similar Messages

Maybe you are looking for