Problem with reseting (restoring forgotten) passwo...

Can't reset password on account esina_nat, both temporary links and link to a page where I should enter hash code redirect to a main Skype page >_<

have same problem mate! trying to recover my mom's pass, but redirecting on main page.

Similar Messages

My iphone 4s is not charging beyond 44% n if at all charges, it stuck's at 77%,done with reset,restore backup ...but no use

my iphone 4s is not charging beyond 44% n if at all charges, it stuck's at 77%,done with reset,restore backup ...but no use
reset done
restore backup done
changed charger
restarted many times
but no use
...in some blogs i av found that itz a problem of ios 7 which doesnt support apple 4s ...is it true?
kindly solve the issue...
.thanx in advance
regards
ajay
frm hyderabad

Hi nikkiyoung,
If the reset is not helping, you may need to try the recovery mode.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
5. If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
6. If the above steps do not resolve the issue, contact Apple.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Note you will want a backup as, "Recovery mode erases your device and restores it".
Thank you for visiting Apple Support Communities.
Nubz

I was resetting my macbook pro 17 (early 2009) to factory settings but does not restore due to a problem with the restore disk. Please advice me on what to do next.

I was resetting my macbookpro 17 (early 2009) to factory settings but was indicating problems on the restore disk. I erased my macintosh hd drive so the hd is empty. What do I do next?

Get an external drive and make a clone of your internal, erase the internal, set it for 1 partition (OSX Journaled) and restore the clone.

Problems with a Restore after trying to resolve problems with Yosemite

Hi there,
I stupidly upgraded my OS to Yosemite without waiting a month or so for any problems to be fixed.
After the upgrade which went really well, or so I thought, all my apps worked, and I was very happy with it until I switched to Bootcamp to to find that I didn't have the option to select Bootcamp as startup. Although I had the BC icon on my Mac desktop, and I could access it from my Mac, I couldn't switch over.
So I did a restore to a timestamp just before my Yosemite upgrade - and this went... sort of well... I panicked when I thought I'd lost all my 10's of thousands of emails but the rebuild went well. The problems I have with my restore are that some of my applications are missing - I just get a '?' in the dock and it tells me what the apps are when I hover my pointer on them. The apps are;
System Preferences
Safari
Preview
Skype
Vox
VLC
uTorrent
Tunnelblick
Quicktime Player
My Pages documents no longer open - it says The required index.xml file is missing but it does manage to show me a quick view in spotlight
I have seen on this forum that this can be due to having more than one version Pages but I can only find one version in Application/iWork '09
I can't see why Safari wouldn't be present because I thought it was part of the operating system, as in Preview as well. I thought that maybe they are still on my Mac but need some sort of reset or something...
My bootcamp problem has been resolved by the way and I can switch to my Windows apps that I use regularly.
So I would really be grateful for help in restoring the apps above. I was thinking that apps I downloaded like Skype and Vox say, I can download again, but maybe I need to delete files etc. before reinstalling these missing ones.
Many thanks, Maz

Hmmm, problem resolved by restoring forward to my Yosemite backup.
It's the lesser of two evils and I have my Windows apps on my old PC...
So come on Apple and get this fixed - it's absolutely disgraceful that this should happen... absolutely disgraceful!
Maz

Problem with reset in cs5

with ctrl alt shift to reset, i noticed this created problem with normal setup.
things i noticed are that you can't open new file, it returns error message and you have to go to prefence and off open gl drawing to fix them.
and other thing if the mask black/white erasing doesn't work so well.
seems the hardness for brushes whether its 100 or 25, looks the same, i don't remember seeing this before in cs5, should reflect strenght between stronger /weaker erasing.

things i noticed are that you can't open new file, it returns error message and you have to go to prefence and off open gl drawing to fix them.
That just means that your video card driver has some bugs, and needs to be updated.
The error messages tell you that there is a problem with your video card driver.

Problem with reset SMC

hello guys .. i have problem by resetting the smc in yosemite system . ... i've did it for a twice now .. and it didn't make any sense like it doesn't change anything in settings or in touch pad or in sounds
or anything ... and when it was rebooting i've never heard sound of the fan ?? so what i have to do ?
and p.s : i've pressed Shift+ctrl+alt with the power button for a 5 seconds .. and i've released the shift+ctrl+alt buttons and i turn on the lap again ...
so what i have to do to reset it correctly ?
Model Name: MacBook Pro
Model Identifier: MacBookPro8,1
Processor Name: Intel Core i5
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.68f99
Serial Number (system): C17FFQEKDH2G
Hardware UUID: FF9040EB-AAF5-5D01-BC5E-006BFC34890F
Sudden Motion Sensor:
State: Enabled

and it still like i don't made any reset !!
If I deciphered the tortured sentence, I suggest you read what I posted instead of deciding that there was no reset. THERE IS NO VISUAL CONFIRMATION OF A SMC RESET!
Barry
P.S. I am definitely not your "bro."

Content missing and problems with resync / restore functions

Since this morning (it's early evening now), my iPod touch (3G, 64 GB, updated to iOS4 as soon as it was possible from Spain) is not working properly. It started while playing some music. It suddenly stopped without having to. I checked that the ipod was ignoring some songs, whose artwork appeared on screen, as if it couldn't find them. It jumped from one song to the next, and if it couldn't play it either, it stopped.
After a little investigation, I reached the "Settings -> Information" section, where I saw that, although the ipod said it had 4000+ songs loaded, it had more than 50 Gigabytes free, which was impossible, since it was slightly more than 32 GBs free the last time I sync'ed it, and the songs in my library weight about 25 GBs.
Once I arrived home, I tried to resync it, and then iTunes showed that most of the pod was empty and tried to reload all music, but it stopped due to an error after some 200 songs.
Then I tried to restore the ipod, but after a few minutes iTunes displayed an error again.
I'm trying now to resync it again. The process of reloading the songs is being painfully slow. It takes more or less 10 seconds for each song.
Can anyone wonder what migt be happening?
I bouht the ipod in March so it is under guarantee, but I'm going to start my summer holidays this week and I would hate to spend them without the ipod until Apple Services repairs/replaces my iPod.
Thanks in advance for your help.
Message was edited by: gwydno
Message was edited by: gwydno

Hmmm, problem resolved by restoring forward to my Yosemite backup.
It's the lesser of two evils and I have my Windows apps on my old PC...
So come on Apple and get this fixed - it's absolutely disgraceful that this should happen... absolutely disgraceful!
Maz

Problems with resetting ipod touch

I wanted to reset my ipod touch to factory settings and I followed the instructions to do so; however, it's been approximately 5 hours since I've tried to reset it. All I see is the black screen with the apple sign in the middle. It turns off completely then goes back to the black screen with the apple sign about every 10-15 minutes. What should I do?

I've got that problem too. I did it earlier today, and its been about 5 hours, and its saying its trying to verify the ipod restore.

Problems with reset password

Hi all, I wanna ask support for my other account Skype where I can't reset my password. I try to reset it with my email and when I inserit new password the system give me problem and I can't log in to my account. Why? Why I can't use it anymore? Pls help me! It's a week that I can't use it! I can't remember all of my data to ask support for email... How I can do? I'm really desperate!

The passcode you need is the four digit number that you enter after an Autolock on your device or when you first turn it on. If you can't remember that code you'll have to restore your iPad before you can do the update.
http://support.apple.com/kb/HT1212

Problem with firmware restoration CD

I have a dead MacBook Pro (mid-2010 15" i5) that went through a failed firmware update. I found and burned the Firmware Restoration CD 1.7 that is needed to reset the firmware.
The problem I have is with the procedure itself as described here: http://support.apple.com/kb/DL77
7. Turn on the computer and continue holding the Power button. The sleep LED will blink rapidly, then slowly, then rapidly (3 quick blinks, 3 slow blinks, 3 quick blinks). On Macs that don't have a sleep LED, tones are used instead. Hold down the power button until you hear 3 long tones, then 3 short tones, then 3 long tones.
8. Insert the Firmware Restoration CD while the lights are blinking or tones sounding, then release the Power button. A long tone is played once the recovery process has started.
The MBP does not have this behaviour with the sleep LED. I hold down the power button, the sleep LED flashes rapidly for about 1-2 seconds and the I hear the boot chime and the MBP tries to boot normally from the HD. If I try to insert the CD while the light is flashing, the MBP just spits it out.
What is the right procedure to restore the firmware with this particular MBP model? Thank you!

The MacBook Pro 15" Mid 2010 has a model identifier "MacBookPro 6,2" and isn't listed at the link you provided, it's the wrong firmware your using.
Here's the correct version
http://support.apple.com/kb/DL1098

Problems with system restore points in Win 8.1 (keep increasing in size)

Hi,
I was sent here by Microsoft Support who seem to have no idea of the mechanics of System Restore and what could interfere with it. I've no idea where to post this, so I hope you can help in that.
I have the problem that my System Restore point (only a single point) keeps increasing rapidly in size from a few Mb to many Gb and even fills the C drive if I don't stop it. Setting a limit to the size doesn't help (in System Restore or VSS), as it ignores
it and increases the limit. I have tried all the usual (sfc, DISM, chkdsk, several antivirus and malware programs) with no success.
Obviously, I can turn off System Restore, but that isn't really something I want to do.

When you say "system backup", do you mean generation of system restore points or an actual backup? i don't use MSBackup.
Hi,
What I meant system backup is system backup feature that it would create restore point when you enable system backup automatically.
I made a test in our testing enviroment. limit restore point disk space usage to minize, create some restore point. When I create a seconde restore point, it would replace the former time point. The maxize disk space usage won't more than the limiation.
Therefore, please check the size of Restore Point in C:\System Volume Information if it's larger than system limiation.
Roger Lu
TechNet Community Support

Problems with Full restore using Time Capsule backup???

For some reason my MacBook Pro recently crapped out completely, and I am trying to do a complete restore of the OS via a full backup I made with using Time Machine onto my Time Capsule disk, but I am running into some problems doing so and I was hoping someone might have some insight as to how I should deal with things at this point...
Here's where things get messy...
- I insert my Mac OS X 10.5 Installation DVD into my Macbook and boot from the drive, and I immediately choose the menu option to 'Restore from Time Capsule Backup'...
- After logging into my Time Capsule and then choosing the proper .sparseimage file to restore from, I click 'continue' and it brings me to the screen where I choose where I want to restore to (which in my case, is the one and only internal HD inside my Macbook Pro)
- The bottom of this window tells me that it's "Calculating space required to restore data..." but it simply hangs at the point with a spinning wheel indicating its still doing the calculating, but never actually presents me with the space required, not does it allow me to click continue to perform the restore?? I've allowed it over an hour to calculate the space required and it still just spins its status wheel...
This is where I am stuck at this point, and I have no idea how to get it to proceed to the next step to allow me to perform the restore??
Any suggestions would be greatly appreciated, as I will have no choice but to do a complete reinstall (including all apps and data) if I can't get the backup restored... Thanks!

I had the same problem when installing a new HDD in my Macbook. The solution I found was to reinstall Leopard onto the new HDD from the install CD, then reboot off the install CD once I had done this. I was then able to choose the 'Restore from Time Capsule' option and get my HDD to show up in the window.
A word of warning, once you have reinstalled Leopard and it starts asking you for all you info, as if for the first time to set up your computer, there is an option at the end of that process to restore your data from a Time Capsule backup. While this did restore all my files and so forth, it did not update any of the 'Apple' apps, i.e. iTunes, iPhoto, Quicktime, or the operating system itself, suggesting a 500Mb download via 'Software Update' to update the system. It was faster for me to reboot of the install CD and restore via the process outlines above. That way you get all your system updates included.
Not sure if this is the 'approved' method but it worked for me! The restore process took about 75 minutes for about 100Gb of data from my external backup drive connected to my Macbook via a Firewire cable.
Hope this helps!

Problems with Backup restore after HD replacement

Hi All,
I recently had my HD replaced on my Powerbook through Apple and I am having some significant problems trying to get everything running properly again. Prior to sending my computer out, I did have everything backed up on an external HD using Backup.
When I received my laptop back, I ran the "Restore" function in Backup but things didn't seem to restore properly.
For example, when I open up a Finder window and click on "Documents", I get the following error message: The Volume Documents can not be found". I get the same message when I click on "Movies".
When I open iTunes and iPhoto, none of my music or photos show up.
It appears that the data is on the HD though. From the Finder window, I click on the HD and then on the Users folder and I can see the data in a folder with my old User Name. I just can't seem to associate the data with my current account user name.
I am wondering if this has to do with the fact that they didn't rebuild my accounts that I had set up.
Any suggestions would be greatly appreciated.
Thanks!

Welcome to Apple Discussions, Rick.I did have everything backed up on an external HD using Backup.
That is fortunate, you can manually move those folders over to your new user. Do not move Desktop. Documents, Library. Movies, etc but rather copy and replace with the folders from your backup.
Here is a list of where your important data is stored ("~" stands for "home"):
Your data in ~/documents
~/library/application support/addressbook (copy the whole folder)
~/library/application support/iCal(copy the whole folder)
Also in ~/library/application support (copy whatever else you need)
~ /library/keychains (copy the whole folder)
~/library/mail (copy the whole folder)
~/library/preferences/com.apple.mail.plist *This is a very important file which contains all email account settings and general mail preferences.
~ /library/itunes (copy the whole folder)
~ /library/safari (copy the whole folder)
~ /library/imovie (copy the whole folder)
~/pictures/iphoto library
~/music/itunes
~/movies/imovie
If you want cookies:
~/library/cookies/cookies.plist
~/library/application support/webfoundation/HTTPcookies.plist
For Entourage users:
Entourage is in documents/microsoft user data
Also in ~ /library/preferences/microsoft
internet explorer favorites are in ~/library/preferences/explorer/favorites.html
EDIT: I am wondering if this has to do with the fact that they didn't rebuild my accounts that I had set up.Yes.
-mj

Problem with reset button

Hello All,
I have a form which has several fields. There is a reset button at the top of the Page -1 of the form which should clear/rest the form. But I have several checkboxes, out of which if some clicked few text fields / drop downs associated with it becomes mandatory. Suppose one clicks Checkbox -1 and the field TextField -1 associated with becomes mandatory.If the user clicks the reset button after clicking the checkbox (which makes the field mandatory) then though the checkbox is unchecked the field remains as mandatory. How to get over it with ? I have placed the script in the change event as well as in the click event of the text box as there are conditions to met (Suppose there are 3 check boxes associated with a text field and the field becomes mandatory if one of them is clicked) Any help would be greatly appreciated.
Thanks.
Bibhu.

Hi Bibhu,
It is difficult to say without seeing the form, but a couple of things:
Try testing against null as well.
Check the binding on the checkbox on page1 that it has binding of '1' and '0'.
Double check the object reference for the checkbox on page1, eg is it in another subform.
Use the JavaScript Console (Control+J when previewing) to see are there any errors when exiting the textfield.
I would agree with the script being in the exit event.
I have an aversion to naming design pages with a capital 'P', as this is used for Master Pages, so I would generally use page1, ... page5. This isn't the problem here, just a comment.
Good luck,
Niall

Problem with reset to factory settings.

I have a go notebook with the product number D1E89UA#ABA. I am wanting to reset this computer to factory settings but it won't let me. It has windows 8 on the computer so I click change pc settings and go down to general. Then I scroll down to where it says remove everything and reinstall windows. Then I click get started the I click next, then it says preparing. Then I click on fully clean the drive because I want it to be 100% factory settings. Then I have it plugged into the charger and click reset to reset the computer. Then every single time it says there's a problem no changes are made. Then I click check solutions to this problem and it never pops up any solutions. Please help!!

Hello @Rkaeden,
I understand that you are trying to recover your computer back to factory settings. I am providing you with an HP Support document: Performing an HP System Recovery (Windows 8), which will walk you through the process of doing a Factory Recovery on your computer.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Problem with reseting (restoring forgotten) passwo...

Similar Messages

Maybe you are looking for