Problem with Restricted Key Figures Please Solve
Dear All.
i restrict the key figure on some GL's for Cumulative balance, this RKF show me the result base on the 0CALMONTH which is select in the variable screen.
i created one more RKF with the same GL's but i restrict that RKF also with fix 0Calmonth say DEC2008.
but the problem is when i run the report it shows me that data correct, but when i bring the 0CALMONTH on top of the Key Figure structure it only show me the data for selected month for the fix month RKF the result come empty.
my requirement is that i have to select month range and i need to show every month value minus the Dec2008 value, this only works if i donot bring the 0CALMONTH on top of Key figure structure but i want to keep it on the top of KF structure so i can show each month value - dec2008 value.
Please explain how can i control this.
Kind regards,
Edited by: Zeeshan haider on Nov 11, 2009 9:49 AM
Edited by: Zeeshan haider on Nov 11, 2009 9:59 AM
Dear Chandu.
I am creating the RKF on Cummulative Balance KF by restricting it with some combinations of GL's, let say the name of RKF is TRADE_Accounts.
My requirement is to give Calmonth selection from the variable in interval let say from 01.2009 - 05.2009
i simply want to display TRADE_Account balance for each month in selection but by doing the minus the value of Trade_Account from the same RKF i.e. TRADE_Account_2 which i restrict on DEC2008.
so i created Two RKF for KF cummulative balance one is restricted with 0CALMONTH value for DEC2008 only.
then i create on CKF let TRADE_BALANCE = TRADE_Account2008 - TRADE_Account.
and place the CKF in Key Figure Structure, it work fine but problem comes when i try to bring 0CALMonth on top of key figure structure so i can show the result for each selected month.
when i do this it only shows the Balance for selected months but it did not minus it with the other RKF i.e. TRADE_Account2008.
when for testing i also put the TRADE_Account2008 in Key figure structure it shows empty result when the 0CALMONTH is on top of the Key figure structure.
Please explain how can i achieve this.
Kind regards,
Similar Messages
-
Problem with restricted key figures
Hi all,
I have four restricted key figures in my structure each one is restricted Fiscal period with user entry variable but when i execute the report and check one of the restricted keyfigure is actually not restricting the values.
suppose user entered 10.2006 in the selection for fiscal period then one of the column Goods receipts QTY which is restricted with Fiscal period display values other than that of 10.2006
Did anyone faced such problem earlier?
Please let me know if anyone had a clue.
Thanks in advance
Regards
AjayHi gopi,
Thanks for all of the restricted keyfigures it is "include value".
Regards
Ajay -
Problem with Restricted Key figure!
Hello BW Gurus,
Currently I am having problem with a report that is using a restricted key figure in the formula. When I filter down this restricted key figure, it is working fine but when I use this restricted key figure in formula that calculate greater than value, its giving me wrong figure and when I calculate less then value, its giving me zero total result. I am drilling down this restricted KF on a hierarchy. Did I miss any setting or do I need to do anything extra for this?
Please let me know and thanks in Advance,
Vaghar.In that case create two calculated keyfigures CKF1 and CKF2 such that
CKF1 = ((Count >100)*1 + 0)
CKF2 = (Count<100)*1 + 0)
and then define Greater Count as a formula such that
Greater Count = <b><i>Count</i></b> (CKF1)
and similarly Lesser Count = <b><i>Count</i></b> (CKF2).
where <b><i>Count</i></b> is a data function which gives a value of 1 when the operand <>0 and returns a 0 when the operand = 0.
Hope this helps. -
Problem with restricted key-figure using off-set variable
Hello Gurus,
I have created a query in Bex Query Designer with a key figure restricted. This key figure shows me the 0amount value for the last month. When I select 003.2009, the key figure brings the 002.2009 values. I used an off-set variable to do this
It works!
But when I show this key-figure in Webi, no value shows up on the table.
Any suggestions?
tks
Edited by: Allisson Valverde on Jul 23, 2010 12:12 AMWhich variable are you using in BEx and in WEBI to restrict the month/year?
-
Problem with a key figure restriction
Hi,
I have a problem with one key figure in report: in infocube, this key figure is aggrigated for all the profit centers (summation). In infocube, there is a value '150' for each profit centers (100 pieces) and in the report it is counting 150*100=15000. However, it shouldn't count the sum of all entries in the infocube but show only one value in the report which would be '150'.
I think this should be possible to do but I just don't know how. Hope somebody is able to help me. Thanks in advance.Hi,
If the values are same for all profit center then change the Profit center infoobject property in the query design to show the maximum values for the 'calculation result as' parameter
Regards,
Vishwa,
Edited by: Vishwanath H.E on Sep 3, 2008 9:19 AM -
[sapsem] BI-IP: Documents with restricted key figures in WAD
Hello,
we use documents for characteristics in WAD (BI IP) suscessfully.
We would like to use documents also for restricted key figures.
Example:
0Version has "document property" defined in RSA1
We have a restricted keyfigure ED_K10 with the restriction 0VERSION = 10
We are not able to use it, because document functionality can be used
for characteristics only.
Does anyone have an idea what to customise to be able to use documents
also for restricted keyfigures?
regards and thanks in advance for any feedback
Eckhard LewinHi Eckhard,
I think 0version needs "document property" , too !
regards
Paul -
Query problem with accumulated key figures
Hi BI Gurus!
I have a report problem that I hope you can help me with!
In my report I have 2 key figures. One for accumulated revenue previous year (KF1) and one for accumulated revenue current year (KF2). Both key figures should be presented in a graph in monthly buckets.
January figures from both the key figures shoule be presented in the same bucket. Therfore I can't use 0CALYEAR since we have the "year" information in there. Instead I'm using 0CALMONTH2 which is only two digits, 01 for January. That way I can map figures from both previous year and current year in the same bucket.
I need the figures to be accumulated and this is what I have problem with. When I run the report today in February 2010 it looks like this:
Month KF1 KF2
01 10 15
02 10 20
03 15
04 10
05 20
06 10
07 10
08 15
09 15
10 20
11 20
12 10
This is how I would like the report to look like:
Month KF1 KF2
01 10 15
02 20 35
03 35
04 45
05 65
06 75
07 85
08 100
09 115
10 135
11 155
12 165
I have tried to use the setting "accumulated" for the key figures but then I get this result:
Month KF1 KF2
01 10 15
02 20 35
03 35 35
04 45 35
05 65 35
06 75 35
07 85 35
08 100 35
09 115 35
10 135 35
11 155 35
12 165 35
Since the KF2 is revenue for current year and I run the report in February I don't want any figures to be displayed in Mars...
I have tried to restrict the key figures by 0CALMONTH2 and 0CALYEAR. The KF1 is havein a restriction to only show values for 0CALYEAR - 1 and an interval for 0CALMONTH2 from JAN - DEC.
The KF2 is having a restriction to only show values in the interval "first month in year - current month" (in this example JAN - FEB) for 0CALMONTH2. And current year for 0CALYEAR.
Despite my restrictions for KF2 the numpers repeats itself for every month...
Any suggestion how I can resolve this?
Best regards
Anders FlorinHi Khaled and thank you for trying to help me!
I agree with you and think the users should accept the report as it is. But they are claiming that top management will not accept this and they would really want this to be fixed the whay that they want. I have tried to push back on this and said that I'm not sure that it can be resoleved and that it could cost them a lot of money if I try.
But I will try to resolve it for them if I have spare time in the end of the project. I have not promised them anything but it would really be nice if I could fix it.
So when you say I need to use a structure and a calculated key figure. How should the calculated key figure and the structure be configured?
If I use a structure in the rows I guess I can't use same object in calc.key.figure right? Like if I use 0CALMONTH2 in the structure I'm not able to restrict the key figure with the same object? If that is correct I also have a ZMONTH object, different story why I have that... , that I can use in the same way as 0CALMONTH2. Or is this only a problem when I use "local" formulas within the query and not using a "global" calculated key figure? Cause I have only used the "loacal" formula calculated key figure in this report....
Br
Anders -
Problem with multiprovider key figure
Hi all,
I have Infocubes according to reporting division and a multiprovider built on these Infocubes.
There is a key figure NET_SALES,the value of which differs in the Infocube and multiprovider.When i check the infocube data independently,the value of the key figure looks ok but when i try to display data in multiprovider with the same conditions,the value of the key figure is incorrect.
Can anyone please help me out with this?
Regards,
SuchitraThen make sure that you are analyzing it correctly. Multiprovider will show only values which is coming from the cube.
Do one thing, uncheck the other three and check for only one cube. Now, you match the data. If its correct, do it for all the region. It may help you to diagnose where is the problem.
Thanks...
Shambhu -
Problem with displaying key figures in report
Does anyone have experience with SAP Report Designer for Release 7.0. I want to display key figures in the following manner: 1'500 (Which means 1.500.000) For a billion the value displaye should be 1''000 (1.000.000.000).
1000 = 1.000
0'010 = 10.000
0'100 = 100.000
1'000 = 1.000.000
0''010 = 10.000.000
0''100 = 100.000.000
1''000 = 1.000.000.000
Thus the report always shows 4 digit figures. The problem is that I don't know how to include the apostophe as a separator for the million.
Additionaly to that I want to have the font changed to a smaller number, if the figure is to large for the column. Is there a possibity to change the display of the figure with the scaling? And is there a possibility to change the font? These two parameters have to be decided when running the report. (The scale of the numbers can differ within one column.)there is two way to display the values , one is globally, where u do it the keyfigure and another way is on the query designer level
in keyfigure go to aggregation , there u will get the number display format , u can change there and another way is in the query designer right click on the key figure and select properties and select display format -
Problem with virtual Key Figure in a query
Hi Experts,
I would like to share my problem with the virtual key figure in a query:
I have a query with a virtual key figure and when I eject the query by analyzer, the result sometimes is displayed and sometimes is not displayed (is equal to 0), with the same initials values. And when I eject the query by RSRT always display the result for the virtual key figure.
Why don't always display the result?
Thanks a lotHi,
I think that the problem is the level of support package. We have BI AddOn 7.X (based on 7.20) support package 0.
What do you think?
Regards -
Display Problem with the Key Figures
Hi,
I working on the query where i need to display three Key Figures. I have no problem with the first two Key Figures , but the third Key figure values need to be display by day wise. (0Calday). i.e., the third key figure value should be displayed based no of days 0Calday has.
For Example if 0Calday is holding 4 days... then third keyfigure Value should be display as 4 columns with their respective values by dividing into day wise, remaining first two key figures should not be changed.
When i am trying to call the 0Calday into the Column, all the three Key Figures values are displaying as many as no of days 0calday has.
For Example if 0Calday has 2 day....the three Key Figures are values are breaking into two days values and displaying, so totally we can see 6 Key figure values. But i need first two values should not break but the last key figure should be divide into two days as values and display.
Thanks & Regards
Agama.Hi Venkat
This can be achieved by supressing 0 values.
1) In the Query Designer: Go toquery properties
2) Select Suppress Zeros
3) Select option Active
4) Under Effect On : try with Column or row o (Not infront of system , so cannot exactly remember)
This will allow you to get the exact result as per your requirement. We had the same issue and we could resolve this by following this.
Hope it helps.
Cheers -
Problem with using Key Figure inside IDT
Hii Experts,
I have created an Universe using Information Design Tool(IDT), in which i had created the Key figures whose value are calculated based up on Date i supply and that value is Being Calculated fine according to my need.
But Problem is that when i am going to use that Key figures value in further Calculation, its returning wrong value....
Can anyone please help me, how can i use the Key figure's value in another key figure for further calculation inside the IDT.
Thanks
PrakashHi Prakash,
Can you explain what are you doing exactly and what you wan to do?
Can you provide the expression you wrote? Which database are you using?
Thank you
Didier -
Problems with Calculated Key Figure in Bex
One of our super users have copied a query and trying to do some changes in the new query. In the Query designer, the person was directly dragging a Calculated Key Figure from the left hand side panel into columns and trying to change its properties (Currency conversion key is changed from 'Nothing Defined' to 'Monthly average rate' with variable entry.
Then we get the error 'Abort system error in program and form SET_TCUR-02-' without even getting the variable popup window.
Also when we check the Query properties, we observed that one variable entry (which is displayed in the target currency field in the properties) is displayed twice and came to know that this is the reason for the error.
But why is that displaying twice there? Is there anything wrong in the way we had created the CKF? Do you have any document on how to use CKFs and RKFs?Check here:
http://help.sap.com/saphelp_nw04/helpdata/EN/13/e072abaddb574284d22361f0b824bf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/6f/56853c08c7aa11e10000000a11405a/content.htm
For Currency Translation "How to:, see here:
http://help.sap.com/saphelp_nw04/helpdata/EN/d2/02223c5f00612be10000000a11402f/content.htm
Thanks..
Shambhu -
Problem with Calculated Key Figure and Acumulated
Dear Masters,
I am trying to use cumulated KF in a query. No problem with results. I just flag 'Cumulated'. However I need to use the value of each line in an operation. Let me illustrate it:
Cumulated KF KF1 FINALKF
2 2 2/2=1
3 (2+1) 1 1/1=1
5 (3+2) 4 4/2=2
6 (5+1) 2 2/5=0.4
As you can see above instead divide the KF1 by Cumulated value of a Line, the final result is always KF1/the value that would be the add value. The first line always is right because for the line 1 cumulated value has no accumulation value.
Any idea?
Regards,
GilsonTeixeiraAny idea?
-
Subject : Problem with Virtual key figures for one scenario.
Hi Gurus,
I have implemented Virtual Keyfigures for my Bex report and it is working perfectly bUt for one scenario.
If i give PLANT and MATERIALS in the selection , The report calaculates the Virtual
keyfigure value correctly But if i give Only PLANT
and NO Materials ( A single plant can have 700 materials also!!), The report executes and after sometime
gives me a messsage " Disconnecting from Server"
I executed the report in RSRT . It gives me this error "exception with the type CX_SY_ARITHMETIC_OVERFLOW occurred"
Since the Virtual keyfigure doesnot use Cache memory. Is it restricted by the Physical memory?. How to overcome this
problem?
Please let know if anyone faced this issue and resolved It. Any help or guidance is really appreciated.Hi Oscar,
Thanks for reply,
How can i know the overflow and how can i use the catch for avoiding the short dump?
thanks in advance.
Maybe you are looking for
-
hi there anyone can help me on how to write and read from a file? how can i read one string at a time instead of a char. thank you.
-
ITunes not detecting iPhone 5, Windows 7 64Bit
Hey, so I have had this issue for a while now where iTunes simply won't detect my iPhone. I have tried the following: 1. Rolling back to an earlier version. 2. Following Apple's uninstall guide: iTunes QuickTime Apple Software Update Apple Mobile Dev
-
Can't register my macbook that I bought off ebay
I bought a Macbook Pro from someone off ebay. I have their receipt from when they purchased it, and I wanted to get applecare for it. But when I try to register the Macbook under my Apple ID, I never get a confirmation email, and it does not show up
-
Restart: Outbound Error in SXMB_MONI
Hi ALL I have an error in SXMB_MONI in outbound status. couldnt see any worklogs in PE also. The message status shows success but error in outbound. <u>Howto restart the message.</u> 1. IP is 0 in sxi_cache 2. CC configuration are correct thkx Prabhu
-
Linker error while packaging iOS app with my ANE
While trying to write a iOS Native Extension for ZXingObjC (https://github.com/TheLevelUp/ZXingObjC), the following link error shows up when exporting in Flash Builder 4.x: Error occurred while packaging the application: Undefined symbols for archite