Problem with return table(adding extra record)

Hi,gurus,
I am facing a probelm with return table, i.e it is adding body record and workarea record also to the data target. so, it is adding the actual record to data target including the workarea record to with the key figure and year values as zeros and spaces. It's quite strange.
Please help me out, thanks a lot.

Hi,
   I have an ODS with the keys fields(ZPS_TXMID,ZPS_NODE，ZPS_NODE) and data fields(ZAU_C108,ZAU_C109,0PROJECT). I have to split one record from datasource to 6 records into my ODS. I'm updating ZAU_C109 with a routine with return table. Here is the code, please check it for me:
<i> data: prj like /BIC/PZPS_TXMID-PROJECT.
data: ls_icube_value like ICUBE_VALUES.
clear ls_icube_value.
select single PROJECT into prj from /BIC/PZPS_TXMID
        where /BIC/ZPS_TXMID = COMM_STRUCTURE-/BIC/ZPS_TXMID.
ls_icube_value-/BIC/ZPS_TXMID = COMM_STRUCTURE-/BIC/ZPS_TXMID.
ls_icube_value-/BIC/ZAU_C108 = COMM_STRUCTURE-/BIC/ZAU_C108.
ls_icube_value-/BIC/ZPS_NODE = '1'.
ls_icube_value-/BIC/ZPS_SNODE = '0'.
ls_icube_value-PROJECT = prj.
ls_icube_value-/BIC/ZAU_C109 = COMM_STRUCTURE-/BIC/ZPS_HJHSJ.
APPEND ls_icube_value TO RESULT_TABLE.
ls_icube_value-/BIC/ZPS_NODE = '1'.
ls_icube_value-/BIC/ZPS_SNODE = '1'.
ls_icube_value-PROJECT = prj.
ls_icube_value-/BIC/ZAU_C109 = COMM_STRUCTURE-/BIC/ZPS_HPSJ.
APPEND ls_icube_value TO RESULT_TABLE.
ls_icube_value-/BIC/ZPS_NODE = '1'.
ls_icube_value-/BIC/ZPS_SNODE = '2'.
ls_icube_value-PROJECT = prj.
ls_icube_value-/BIC/ZAU_C109 = COMM_STRUCTURE-/BIC/ZAU_C101.
APPEND ls_icube_value TO RESULT_TABLE.
ls_icube_value-/BIC/ZPS_NODE = '2'.
ls_icube_value-/BIC/ZPS_SNODE = '0'.
ls_icube_value-PROJECT = prj.
ls_icube_value-/BIC/ZAU_C109 = COMM_STRUCTURE-/BIC/ZPS_TJHSJ.
APPEND ls_icube_value TO RESULT_TABLE.
ls_icube_value-/BIC/ZPS_NODE = '2'.
ls_icube_value-/BIC/ZPS_SNODE = '1'.
ls_icube_value-PROJECT = prj.
ls_icube_value-/BIC/ZAU_C109 = COMM_STRUCTURE-/BIC/ZPS_TDSJ.
APPEND ls_icube_value TO RESULT_TABLE.
ls_icube_value-/BIC/ZPS_NODE = '2'.
ls_icube_value-/BIC/ZPS_SNODE = '2'.
ls_icube_value-PROJECT = prj.
ls_icube_value-/BIC/ZAU_C109 = COMM_STRUCTURE-/BIC/ZAU_C102.
APPEND ls_icube_value TO RESULT_TABLE.
ABORT = 0.</i>
   After loading, I checked the contents of ODS, there are 6 records(0project, ZAU_C108 are blank, other fields are correct) + 1 more record(ZPS_TXMID,0project, ZAU_C108 are correct, other fields are blank), what I expect is only 6 records with all fields being filled properly, no blanks, no extra records. Is it strange? or am I doing sth. wrong?
Your help is appreciated.

Similar Messages

Problem with Return table

Hi all,
Greetings!
I am facing a probelm with return table, i.e it is adding body record and workarea record also to the data target. so, it is adding the actual record to data target including the workarea record to with the key figure and year values as zeros and spaces. I worked with Return table one or two times, but this time amazing it is adding extra record.
Please guide me..
Thanks and Regards
Chand

Hi Chand,
Adding extra rows is kind of strange. It must be either, the records in the data request being duplicated or the logic in the RETUN table must be messed up. If possible just have a snapshot of pseud code may be it could help analyzing the error.
Regards,
Praveen

Problem with maintain table views SM30 Transaction

Hello All,
i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
the ZIV_DP_PLCHAR_LA is the name of my table...
can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
SM30 "maintain table views: initial screen"
if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
to have a new screen?
thanks for all
Bilal

Hi
First delete the old table maintainence generator.
Now Recreate the screen and your table is good to go..
These error messages come when we add new fields and different version of the table maintainence generator in database.

Problem with showing a group of records in dynamic page (PLS-00428 error)

Hi
I have problems with viewing a group of records from db. I've created Page, which "Page Type" attribute is "PL/SQL". In "PL/SQL Code" field, I've written very simple SQL query: "SELECT * FROM PORTAL_DEMO.EMP ;"
I'd like to generate HTML table with it's result. Unfortunately, every time I get the same Exception:
Error 30584: DBMS_SQL has raised an unhandled exception. ORA-06550: line 1, column 7: PLS-00428: an INTO clause is expected in this SELECT statement
Is it necessary to write a COURSOR (and use HTP function) to realize this functionality? I succeed, trying this way - but it is very uncomfortable ( a lot of code ).
What I have done in wrong way?
Please help me.
Best regards
Mario

How do I handle this?

Problems with partition tables

Hi all,
I've got some problems with partition tables. The script at the bottom run but when I wanna insert some values it returns me an error
(ORA-06550: line 1, column 30: PL/SQL: ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored)
and I can't understand why!
There's something incorrect in the script or not?
Please help me
Thanks in advance
Steve
CREATE TABLE TW_E_CUSTOMER_UNIFIED
ID_CUSTOMER_UNIFIED VARCHAR2 (27) NOT NULL ,
START_VALIDITY_DATE DATE NOT NULL ,
END_VALIDITY_DATE DATE ,
CUSTOMER_STATUS VARCHAR2 (255)
PARTITION BY RANGE (START_VALIDITY_DATE)
SUBPARTITION BY LIST (END_VALIDITY_DATE)
PARTITION M200909 VALUES LESS THAN (TO_DATE('20091001','YYYYMMDD'))
(SUBPARTITION M200909_N VALUES (NULL), SUBPARTITION M200909_NN VALUES (DEFAULT)),
PARTITION M200910 VALUES LESS THAN (TO_DATE('20091101','YYYYMMDD'))
(SUBPARTITION M200910_N VALUES (NULL), SUBPARTITION M200910_NN VALUES (DEFAULT)),
PARTITION M200911 VALUES LESS THAN (TO_DATE('20091201','YYYYMMDD'))
(SUBPARTITION M200911_N VALUES (NULL), SUBPARTITION M200911_NN VALUES (DEFAULT)),
PARTITION M200912 VALUES LESS THAN (TO_DATE('20100101','YYYYMMDD'))
(SUBPARTITION M200912_N VALUES (NULL), SUBPARTITION M200912_NN VALUES (DEFAULT)),
PARTITION M201001 VALUES LESS THAN (TO_DATE('20100201','YYYYMMDD'))
(SUBPARTITION M201001_N VALUES (NULL), SUBPARTITION M201001_NN VALUES (DEFAULT)),
PARTITION M201002 VALUES LESS THAN (TO_DATE('20100301','YYYYMMDD'))
(SUBPARTITION M201002_N VALUES (NULL), SUBPARTITION M201002_NN VALUES (DEFAULT)),
PARTITION M210001 VALUES LESS THAN (MAXVALUE))
(SUBPARTITION M210001_N VALUES (NULL), SUBPARTITION M210001_NN VALUES (DEFAULT))
;

Hi Hoek,
the DB version is 10.2 (italian version, then SET is correct).
...there's something strange: now I can INSERT rows but I can't update them!
I'm using this command string:
UPDATE TW_E_CUSTOMER_UNIFIED SET END_VALIDITY_DATE = TO_DATE('09-SET-09', 'DD-MON-RR') WHERE
id_customer_unified = '123' and start_validity_date = TO_DATE('09-SET-09', 'DD-MON-RR');
And this is the error:
Error SQL: ORA-14402: updating partition key column would cause a partition change
14402. 00000 - "updating partition key column would cause a partition change"
*Cause: An UPDATE statement attempted to change the value of a partition
key column causing migration of the row to another partition
*Action: Do not attempt to update a partition key column or make sure that
the new partition key is within the range containing the old
partition key.
I think that is impossible to use a PARTITION/SUBPARTITION like that: in fact the update of "END_VALIDITY_DATE" cause a partition change.
Do u agree or it's possible an update on a field that implies a partition change?
Regards Steve

Problems with a table in PDF`S footer

Dear sirs,
We are having problems when trying to run a PDF with Adobe LiveCycle Designer tool.
We are working with a PDF which is composed of a header, the main body and a footer. We have created a table (table1) at the footer and
another one at the main body (table2). This last table (table2) may overflow therefore it will genarate two pages for our PDF.
On both pages appear the header and the footer correctly but in the last page it does not write the data from the table included in the footer (table1).
We have no problems with the table included in the main body
In the attachments, I send you the screenshots of both pages in which I have marked in red the part where we have error.
May you help us to solve our problem?
Thanks in advance your help.
Edited by: emgaitan on Mar 16, 2010 2:18 PM

Wardell,
Check the data in RSA3 for the extractor that you use to bring data .
You must be using the data source 0CO_OM_CCA_09. Check the data and reconcile and you will get it.
Let me know if you need anything else.
Thanks
Ravi Thothadri
[email protected]

I am getting problem with internal table & work area declaration.

I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
TYPES : BEGIN OF ty_makt,
         matnr TYPE makt-matnr,
         spras TYPE makt-spras,
         maktx TYPE makt-maktx,
         maktg TYPE makt-maktg,
         celltab TYPE lvc_t_styl,
       END OF ty_makt.
DATA : i_makt TYPE TABLE OF ty_makt.
DATA : wa_makt TYPE ty_makt .
    But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.

Hi Nagasankar,
TYPES : BEGIN OF TY_MATNR,
              MATNR TYPE MAKT-MATNR,
              SPRAS TYPE MAKT-SPRAS,
              MAKTX TYPE MAKT-MAKTX,
              MAKTX TYPE MAKT-MAKTG,
              CELLTAB TYPE LVC_T_STYL, " Its Working perfectly fine..
             END OF TY_MAKT.
DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
          WA_MAKT TYPE TY_MAKT.
Its working perfectly fine. if still you are facing any issue post your complete code.
Thanks,
Sandeep

Problem with a table control

Hi gurus,
I´ve a problem with a table control. It has 3 columns which one is a checkbox.
I can fill all fields but in the moment I mark the checkbox this line must be unwritable. How can I do it?
Thanks for all
Dani

Assign a function code to the checkbox column....
so when u check / uncheck any entry, PAI + PBO will be triggered....
In the PBO during the loop of table control, check the checkbox field value. if it is 'X', make the row readonly
by looping at screen and setting screen-input = 0 for rest of the columns.
like ...
LOOP AT tc_itab
       WITH CONTROL tc_test
       CURSOR tc_test-current_line.
   module set_row_readonly. " loop at screen and set input = '0' if checkbox is checked...
ENDLOOP.

Problem with Pivot Table with Graph: Line Bar Combo

Hello people!
I have a problem with pivot table and line bar combo (all in the same view (pivot table))
I have some measures and one dimension in my report.
--------------measure1---measure2---measure3
Dim A.1
Dim A.2
Dim A.3
If I choose my graph line bar combo automatically choose "line" measure 3 (last measure in "Show Controls"). How can I do if I want my measure1 for line and I don't want modify my pivot table?
Thank you very much!

Ok, I'll explain my problem again. In my pivot table I add graph vision and I want in the same view (Pivot table). My graph is "Line Bar Combo" and I don't know how but the last of my measures belongs to right AXIS, if I change order of my measures I can see in my graph the measure that I want in my right axis BUT also it changes the order of my pivot table.
This is my problem. I think that I can do that with different views but I lose my selector view to view graphic and my pivot table at the same time.

Problem with truncate table in procedure ora -00054

hi do anybody know where is mistake ???
the procedure has problem with truncate table
ora - 00054: resource busy and acquire with NOWAIT specified
ora - 06512 at "POVAPSYS.HMAN_P_REFRESH", line 6
ora - 06512 at "POVAPSYS.POVAPSYS", line 6
ora - 06512 at line 1
this is my procedure....
AS
BEGIN
execute immediate 'TRUNCATE TABLE hman_t_max';
INSERT INTO hman_t_max SELECT * FROM hman_v_max;
COMMIT;
END;

2.MAKE SURE THAT OTHER THAN YOU ANYBODY IS TRYING TO
COMPILE AND RUN THE PROCEDUREShould he make sure that anybody is running the procedure?
3.MAKE SURE THAT ANY PARALLEL QUERY IS RUNNING IN THE
SERVER SIDE,THATS KEEPS THE RESOURCE BUSYShould he make sure any parallel query is running in the server side to keep the resource busy?
Gita,
I COULDN'T RESIST HAVING ONE SUGGESTION FOR YOU. Please look at the impact of your English in the reply before posting. Check if that sends reverse message!
Cheers
Sarma.

Problem with the table control BDC in FV60 transaction

Hi All,
I got the problem with the table control in FV60 transaction.
This is working for 900 line items.After 900 line items it is giving the problem like it is 1000th line item.You can post only 999 line items.
I know we can post only 999 line items,but in my file only 920 line items.
Please give me solution,if anybody come across this situation.
Thanks & regards,
rakesh.

Hello Rakesh ,
your file may have only 920 line items , but based on those line items, SAP may create few more new lines ( based on the clearing recon accounts , inter company transaction ...etc )...
regards
Prabhu

Problems with QCM tables in DB export

Hi gurus, I have a problem with an export that I'm performing, the problem is that the R3SETUP is trying to export a QCM table "QCMT066" but this table doesn't exits in the database.
(EXP) ERROR: DbSlExeRead: rc = 107, table "QCMT066"
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
The R3 system is a 4.6C and runs over HP-UX 11 64 bits and Oracle 8.1.7
I read and search SAP notes and inside the SAP forums, but I didn't find anything that could help me.
The transaction SM13 says that --> **** No update records found **** when I execute without client, user and date parameters.
The transaction SE11 says that the table in fact doesn't exits in the database, and if I execute a select sentence (SELECT TABLE_NAME FROM DBA_TABLES WHERE TABLE_NAME LIKE 'QCM%') I can see that there is no table with this name.
In transaction.
The transaction SE14 > Extras> Invalid temp. table show the text " ... List is empty "
So please, Do you know what I could do to solve my problem?.
Thanks and best regards
Edited by: Juan Francisco Estrada Garcia on Sep 3, 2010 11:02 AM

Thank you, that is just what I did.
I found this [tread|r3load export error ORA-00942 for table QCMBTXBLOK; where the people talk about .TKS files, but the version that I'm trying to migrate is too old, and the R3LOAD doesn't use TKS files, so I edited every file(.EXT, .STR, .TOC) that contains references to QCM* tables. I deleted every line related with this kind of tables, and finally everything work and the export ended successfully.
Thanks

Problem with a Table Control Scroll Down.

Hi,
I´m working with a table control in which I select one of the many lines the table contains and I move it into a structure, I delete the data of the table control internal table and I move the selected line back into the internal table to show only that record. My problem is the following:
Whenever I have to scroll down to select a line, the selected line doesn´t appear afterwards. I believe that it´s because the scroll bar disappears and keeps on showing the line where the record I selected used to be and because the selected record is added in the fist line of the TC.
Is there any way of avoiding the disappearrance of the vertical scroll bar? Or how can I show the record added in the first line if the TC only displays the position where the selected record used to be?
This is the logic I use to show the single record.
READ TABLE TI_ASIGLOT WITH KEY PUSH = 'X'.
IF SY-SUBRC = 0.
    MOVE-CORRESPONDING TI_ASIGLOT TO ST_ASIG.
    CLEAR TI_ASIGLOT.
    REFRESH TI_ASIGLOT.
    MOVE-CORRESPONDING ST_ASIG TO TI_ASIGLOT.
    ST_ASIG-CPEND = ST_ASIG-GAMNG.
    MOVE ST_ASIG-CPEND TO TI_ASIGLOT-CPEND.
    APPEND TI_ASIGLOT.
Thank´s and regards.
Lucila

Well, I´m going to anwser my own question. The problem was that in my TC the top field value was the line number of the record I've selected. So the only thing I had to do to fix it was to asign 1 to the field TC-top_line inside the form where I select the record.
READ TABLE TI_ASIGLOT WITH KEY PUSH = 'X'.
IF SY-SUBRC = 0.
    MOVE-CORRESPONDING TI_ASIGLOT TO ST_ASIG.
    CLEAR TI_ASIGLOT.
    REFRESH TI_ASIGLOT.
    MOVE-CORRESPONDING ST_ASIG TO TI_ASIGLOT.
    ST_ASIG-CPEND = ST_ASIG-GAMNG.
    MOVE ST_ASIG-CPEND TO TI_ASIGLOT-CPEND.
    APPEND TI_ASIGLOT.
    W_INI = 1.
ELSE.
    MESSAGE I889(100) WITH TEXT-T07.
    EXIT.
ENDIF.
z_result-top_line = 1.
(z_result is my TC )
Best regards,
Lucila

A problem with return order with free goods

Hello
I am working on ECC 6.0
I am facing a problem with the return order the case is I created an order of 1000 pc with inclusive free goods (w/o item generation) condition record that for every 10 pc over the 100 the customer will take 1 free pc
1 pc = 10 $
100 pcs = 900 $
120 = 1080 $
the problem when I am creating a return order with 30 pcs the system calculate the price as if there are free goods the system returns the 30 pcs with 270 $ instead of 180 $ and it should not calculate the free goods because the remaining items are 90 pcs that should not take a free goods discount
Regards
Jacopo Francios

hi ,
Such scenerios can be tackled by different pricing procedure in return scenerio.
See Pricing procedure Depends on sales area + customer pricing procedure + Document pricing procedure .
So for Return document type please maintain different pricing than the normal scenerio this will solve ur problem.
This is generally done also for tackling such scenerios.
Thanks & Regards

Problem with ADF Table and doDML method.

HI,
I have a problem with ADF Trinidad Table. I have one search form and which i click on search button the result is coming it's working fine, And when i click on CreateInsert button to insert a new row it's adding after entering all the data into the table when i click on button on the page i am getting error like
Messages for this page are listed below.
Error
Missing mandatory attributes for a row with key oracle.jbo.Key[1 ] of type AppModule.CmSubscribersView1
Error
Attribute Name in AppModule.CmSubscribersView1 is required
Error
Attribute CreatedBy in AppModule.CmSubscribersView1 is required
Error
Attribute CreationDate in AppModule.CmSubscribersView1 is required
Here Created By and Creation Date are not available in the table i need to set these data from back end for that i have used doDML() method in the entity object and i written the logic but this method not even invoking as i couldn't able to see the logs in the server.
protected void doDML(int operation, TransactionEvent e) {
super.doDML(operation, e);
System.out.println("^^^^^^^^^^^^^^^^66666Inside entity object^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ");
// AppModuleImpl am=new AppModuleImpl();
// Number userID= am.getUserId();
//System.out.println("User id in the Entity Object Is: "+userID);
oracle.jbo.domain.Date dt = new Date();
if(operation ==DML_INSERT){
EntityDefImpl cmSubscribers=CmSubscribersImpl.getDefinitionObject();
CmSubscribersImpl newSubscribers=(CmSubscribersImpl)cmSubscribers.createInstance2(getDBTransaction(),null);
Number n=new Number(1599);
newSubscribers.setCreatedBy(n);
newSubscribers.setCreationDate(dt);
newSubscribers.setLastUpdateDate(dt);
newSubscribers.setLastUpdatedBy(n);
But still the same problem can any one help me inthis.
Regards,
Edited by: user5802014 on Aug 21, 2009 2:04 PM

Hi,
Modify your method to call super.doDML() after initialization of mandatory attributes as below:
protected void doDML(int operation, TransactionEvent e) {
     oracle.jbo.domain.Date dt = new Date();
     if(operation ==DML_INSERT){
          //PRE-INSERT code begins
       EntityDefImpl cmSubscribers=CmSubscribersImpl.getDefinitionObject();
       CmSubscribersImpl newSubscribers=(CmSubscribersImpl)cmSubscribers.createInstance2(getDBTransaction(),null);
       Number n=new Number(1599);
       newSubscribers.setCreatedBy(n);
       newSubscribers.setCreationDate(dt);
       newSubscribers.setLastUpdateDate(dt);
       newSubscribers.setLastUpdatedBy(n);
       //PRE-INSERT code ends
       super.doDML(operation, e);
       //POST-INSERT code if any
     }else
        super.doDML(operation, e);
}Sireesha

Problem with return table(adding extra record)

Similar Messages

Maybe you are looking for