Problem with reusing saved library file due to iTunes version differences

I was running iTunes on my Windows PC with Vista 64-Bit since March 17, 2009. Everything was fine until some operating system file got corrupted two days back, and Microsoft had to wipe out my hard drive and reinstall the Operating System to the factory settings.
I did back up everything, including the iTunes Music files and the Library files to my external hard drive. But, I forgot to note the exact version of my Itunes, except I do remmebr that I had refused all attempts by iTunes over last month or so to install Ver. 8.2 becasue of some bad things I had read in this forum about some of the problems with 8.2. I had a record of the last version I had installed and it was 8.1.0.52.
So, after the operatng system reinstaled, I downloaded iTunes 8.1.1 and installed it. I then copied the iTunes Music files and the libary file to the exatly same folder structure as before.
I hold down the SHIFT key and start up iTunes. And, when I point to the Library file, iTunes says that the libray file can not be accessed because it was made by a newer version of iTunes! I just don't understand how that can be!
In any case, I can use your advice as to what do I do next to be able to use my saved library and start using my iTunes and my iPod!
Thank you.

I downloaded and installed iTunes ver. 8.2.0.23 x64, and now, am very happy to say, that iTunes was able to read my library, and it did recognize my iPod just fine. That's the very good news.
Now, the slight bad news. May be 100 or so, out of some 9000 tracks of music, appear with a '!' to the left of the track listing. It si becasue it does not find it? Why?
Now, I do have to go back to my Album files and identify each of these. Can some one please help me out as to why this problem occured? I certainly did not move any songs to any place and the folder structure is identical to what they were before!
Thank you.

Similar Messages

  • Problem with Search / Find in Files ... in Version 10.1.3.1.0?

    When i use the function Search / Find in Files ... about the Active Application the IDE will be frozen and the JDeveloper hangs and must be killed. Is this a bug or is this only my problem?

    I had a similar problem a while ago.
    It would hang on 'indexing...'
    I think the problem was that i had a package that was called exactly the same as my project.
    For example:
    Projectname: util
    Package: com.example.util
    The problem disappeared when i renamed the project.
    I never came around checking if that was the real problem tough, so i could be completly wrong.
    Regards

  • Problem with RTPExport output video files

    Hi, I have a problem with RTPExport output video files. One side streams H263/RTP(AVTransmit2.java) and other write this steam to a file by RTPExport.java. When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Pls how can I achieve output file that will have the same fps like original one? How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Its there a way to modifi rtpexport or avreceiver to do this? Thanks a lot!

    Trubka wrote:
    When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Okay, first off, the second file is smaller on purpose. RTP intentionally drops packets that are old/out of order in order to make sure real-time video stays as close to real time as it can. This is by design, so there's really nothing that can be done about it.
    How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Technically speaking, what you're getting in the RTPExport is exactly what you got on the receiving end. Any frames that are dropped during transmission will not be seen by the receiver, nor saved by the receiver.
    Pls how can I achieve output file that will have the same fps like original one? I'm not 100% sure that you can, but, you can give the following idea a try. I make no guarentees that it'll work, but it should work for you...
    [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]
    That example is an example of a "custom transport layer" for RTP connections. Essentially, it's some code that's handed the RTP packets on the transmission end, and it's expected to deliver those RTP packets on the other end. And it doesn't care about how they get from A to B, only that they do.
    If you were to replace the UDP socket in that example with a TCP socket, you would be guarenteed not to drop packets due to network reasons. Every RTP packet you were handed by the transmitter, you would then hand to the receiver. There is no guarentee that none of the packets would be cast away as "old" by the RTP protocol itself, but there's also no guarentee any of them would be. It's a crap-shoot at best, but it's certainly worth a try.

  • Problem with Append mode in File Receiver

    Hello,
    I am facing some problem with Append Mode in File Receiver.
    In channel config, i have given :
    Construction Mode : Append
    File Type : Text
    Message Protocol : File Content Conversion
    The size of the file which i am trying to send is about 9.5MB.
    I got this error,
    "Recovering from loss of connection to database; message
    loaded into queue by recover job: System Job (Failover Recovery)".
    So, it would seem that there was a loss of connnection to the database    
    while the file was being written.
    Note -  XI successfully recovered from the connection loss and   
    successfully wrote the file, however since the communication channel  
    was set to append, it appended to the partial file that was written   
    before the database connection loss. This is not correct. The file    
    should have been overwritten after the recovery even though the communication
    channel was configured to append.                                     
    Can anyone help me on this regard.
    Thanks,
    Soorya.

    Hi Venkat,
    I would suggest u to split the file in to chunks if u face any problem in processing at a time in append mode and also
    Memory Requirements are must 4 processing huge files:
    Q: Which memory requirements does the File Adapter have? Is there a restriction on the maximum file size it can process?
    A: The maximum file size that can be processed by the File Adapter depends on a number of factors:
    o The most important one is the size of the Java heap, which is shared among all messages processed at a certain point in time. In order to be able to process larger messages without an out of memory error (OOM), it is recommended to increase the size of the available Java heap and/or to reduce the concurrency in the system so that fewer messages are processed in parallel.
    o Another factor negatively influencing the maximum message size in releases up to and including XI 3.0 SP 13 is an enabled charcter set (encoding) conversion if the message type is set to "Text".
    o Using the transport protocol "File Transfer Protocol (FTP)" also uses more memory for processing than the transport protocol "File System (NFS)" (up to and including XI 3.0 SP 13).
    o If the Message Protocol "File Content Conversion" is used in a File Sender channel, consider that not only the size of the input file affects the File Adapter's memory usage, but even more the size of the XML resulting from the conversion, which is usually a few factors larger than the original plain text file.
    To reduce the memory consumption in this scenario, consider configuring the setting "Maximum Recordsets per Message" for the sender channel. This will cause the input file to be split into multiple smaller mesages.
    Plz do refer the following links:
    U may plan the availability of ur communication channel using "Planning Availability Times" feature
    http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
    /people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
    hi check the below links for reference
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10748ef7-b2f0-2910-7cb8-c81e7f284af5
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7086f109-aaa7-2a10-0cb5-f69bd2affd2b
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cc1ec146-0a01-0010-90a9-b1df1d2f346f
    Regards,
    Vinod.

  • Problem with Preview and PSD files - random gray square

    Hi guys, hope you can help...
    I've got a problem with Preview and PSD files.
    If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
    If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
    I've tried the same psd on my older iMac with leopard...and got no problem at all.
    I suspect it got something to do with my Ati...
    (this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
    Thanks for your help.
    DAve.

    maybe I'm onto something...
    I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
    It seems like the i7 is much faster than the Ati....
    Any more realistic ideas?

  • I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    Is the menu bar missing (the one containing File, View, Edit etc)? If it is, the following link shows how to restore it - https://support.mozilla.com/kb/Menu+bar+is+missing

  • I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

    I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

    Hi Arika,
    The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
    All these drivers are available for downloading on ni.com. To get the drivers, go to ht
    tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
    I hope this information helps.
    Best Regards,
    Wilbur Shen
    National Instruments

  • A problem with importing layered PSD file into Flash

    Hi.
    There's a problem with importing layered PSD file into Flash.
    If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
    If the higher layer has brush or transparent effects, it becomes worse.
    Any help with this problem?
    Thanks.

    How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

  • Problem with Snow Leopard and file sharing

    I mostly work at home where I have an 18 months-old intel iMac 24'' running Leopard and an older iMac G5 20'' (PowerPC) running Tiger. Besides, I have a three months-old MacBook Pro 17" in which I recently upgraded the system to Snow Leopard.
    Before this upgrade I never had a problem with the sharing of files between the three computers (I have them connected via Ethernet and a 5-port D-Link router wich provides flawless internet connection to the three computers). However, after the upgrade it has become impossible to connect the MacBook to the iMac G5 or vice versa via afp. Besides, getting the MacBook to connect to the (Leopard) iMac 24'' is frustratingly slow in either direction.
    A related problem is the fact that after the upgrade the portable is no longer capable of seeing directly my ethernet-connected laser printer (to one of the ports of the D-Link router) although... surprise! it does see it as a shared printer in the iMac G5 and this way it prints alright.
    Any ideas or suggestions to explore the cause of or solve this problem are warmly welcome.
    Emilio Faro

    Same problem here, did you find a solution?

  • Problems with mp4 (h.264) files, colour desaturated.

    Hey guys. I've been having problems with mp4 h.264 files (not quicktime h.264). When playback on windows media player and windows classic media player it looks terrible. the saturation are weird (espesially on colours like yellow and red) and there seems to be this weird blur on the image. For so long I thought there was problem with the export from Premiere Pro, today however when playback on Quicktime player or VLC player it matches the orginal. I exported the file through premiere pro. I don't know what the problem is, maybe it's just the playback on windows media player and window classic media player.
    Playback on quicktime
    Playback on media player
    Can someone tell me what's going on?

    When playback on windows media player and windows classic media player it looks terrible. the saturation are weird (espesially on colours like yellow and red) and there seems to be this weird blur on the image... when playback on Quicktime player or VLC player it matches the orginal...
    On the contrary, with more than high probability playback in QuirkTime shows you wrong colours because of its crooked colour management.
    How do you judge on colour matching between your source file and what you see in media players?
    What is your spec and GPU in particular? Do you use any sort of colour management in its settings?

  • HT204382 Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no d

    Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no diference

    Download and install the free VLC for Mac - that should work:
    http://www.videolan.org/vlc/download-macosx.html

  • Problems with loading native library/missing methods: no ttJdbcCS1121

    Hi guys,
    Im getting this problem in glassfish 2.1, but in glassfish 3 or in tomcat, i dont get this problem. (Windows)
    Any thoughts?
    java.sql.SQLException: Problems with loading native library/missing methods: no ttJdbcCS1121 in java.library.path
    at com.timesten.jdbc.JdbcOdbcConnection.connect(JdbcOdbcConnection.java:1750)
    at com.timesten.jdbc.TimesTenDriver.connect(TimesTenDriver.java:305)
    at com.timesten.jdbc.TimesTenDriver.connect(TimesTenDriver.java:161)
    at java.sql.DriverManager.getConnection(DriverManager.java:525)
    at java.sql.DriverManager.getConnection(DriverManager.java:193)
    at com.summitinvt.mdaq.db.handler.DBConnector.getConnection(DBConnector.java:108)
    at com.summitinvt.mdaq.db.handler.DBConnector.initiateConnection(DBConnector.java:101)
    at com.summitinvt.mdaq.db.handler.DBConnector.<init>(DBConnector.java:34)
    at com.summitinvt.mdaq.db.handler.DBConnector.<init>(DBConnector.java:14)
    at com.summitinvt.mdaq.db.handler.DBConnector$DBConnectorUtil.<clinit>(DBConnector.java:24)
    at com.summitinvt.mdaq.db.handler.DBConnector.getInstance(DBConnector.java:28)
    at com.summitinvt.mdaq.rats.server.CommunicatorImpl.getPnLByCurrency(CommunicatorImpl.java:1074)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at com.google.gwt.user.server.rpc.RPC.invokeAndEncodeResponse(RPC.java:562)
    at com.google.gwt.user.server.rpc.RemoteServiceServlet.processCall(RemoteServiceServlet.java:207)
    at com.google.gwt.user.server.rpc.RemoteServiceServlet.processPost(RemoteServiceServlet.java:243)
    at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
    at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:427)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:315)
    at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:287)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:218)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
    at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
    at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:98)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:222)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:166)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
    at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:291)
    at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:666)
    at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:597)
    at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:872)
    at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
    at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
    at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
    at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:382)
    at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:264)
    at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
    regards
    John

    A similar problem was reported before on this Forum - see
    Re: not able create connection to timesten
    checking the Release Notes I can see 11.2.1.8.0 has been tested against Glassfish 3 but I
    can't see any mention about Glassfish 2 in the v7 or v11 Release Notes (albeit only on a quick
    search).
    In my full install on XP, ttJdbcCS1121.dll is in C:\TimesTen\tt1121_32\bin

  • Problems with loading native library/missing methods:no ttJdbcCS in java.li

    Iam facing one problem while connecting the timesten client to the server The SQL Exception which Iam getting is pasted below:-
    Problems with loading native library/missing methods: no ttJdbcCS in java.library.path
    I am working with MAC OS X 10.7.2 and my timesten client version is 11.2.1.0
    I have also changed the Java Preferences from 64-bit to 32-bit but still whenever i tried to connect with the SQL Developer it gives me the above error.

    I just tried this out. My environment is OS X 10.7.4, Timesten (32-bit) client 11.2.1.9.0, SQL Developer 3.1.07, Oracle Java 1.7.0_04.
    The key things you need to be sure to do (in a terminal window) are:
    1. Be sure to . in the TimesTen environment script <tt_install_dir>/bin/ttenv.sh to set the full TT environment.
    2. Change directory to SQLDeveloper.app/Contents/Resources/sqldeveloper
    3. Run 'sh sqldeveloper.sh -J-d32'
    and all should be fine.
    Note that if you are using Java7 as I am then there is a step 1a. Change the CLASSPATH environment variable to specify ttjdbc6.jar not ttjdbc5.jar. For some reason running the app directly from Finder does not work even if you add -J-d32 into the sqldeveloper launch script. I'm still looking into that.
    Chris

  • Problems with loading native library missing methods ttJdbc1122.dll

    Problems with loading native library/missing methods: C:\TimesTen\tt1122_64\bin\ttJdbc1122.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform
    Hi,
    I have installed TimesTen 11.2.2 64-bit version on 64-bit windows 7.
    I have TimesTen 7 64-bit as well installed on my machice
    When trying to connect to TimesTen (Direct connection) using jdbc from eclipse, I get the following error "Problems with loading native library/missing methods: C:\TimesTen\tt1122_64\bin\ttJdbc1122.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform".
    The JDK version is 1.6.25 - 64 bit version.
    Please help me resolving this error.
    Thanks in Advance,
    Balamurugan

    Are you using SQL Developer?
    There is or used to be a restriction of only being able to using 32 bit. A suggestion might be to try the 32 bit client.

  • I've switched from Google to Firefox because I was so tired of Google crashed all the time. Now I have the same problem with Firefox, Bank id, file down

    Hej!
    I've switched from Google to Firefox because I was so tired of Google crashed all the time. Now I have the same problem with Firefox, Bank id, file downloading, accessing Web pages, none of it works. What is the error?
    Ronnie.

    When Firefox crashes, it usually records information about what was happening at that moment and displays the Mozilla Crash Reporter. Are you seeing that, or is Firefox just freezing and you're killing it?
    Assuming you have crashes, you can submit that data to Mozilla and share it with forum volunteers to see whether it points to the solution. Please check the support article "[[Firefox Crashes]]" (especially the last section) for steps to get those crash report IDs, and then post some of the recent ones here.
    If that's not possible, have you tried Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    Not all add-ons are disabled: Flash and other plugins still run
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Any difference?

Maybe you are looking for