Problem with reverting back
Once I regress from 7.0 back to 6.0 I get the following message:
"The Software for communicationg with the iPod is not installed correctly. Please reinstall iTunes to install the iPod software."
I have the ipod updater from 06-28-2006 and when I launch it it says the following:
'iPod service error"
Any suggestions??
i have a similar problem. am using ipod video 30GB enhanced 5th gen. i tried to sync with itunes 6, but i got something like this - "your device requires the latest version of itunes. please install itunes 7"
the problem is, i installed itunes 7 but i could hardly update my ipod. not even to uncheck the "open itunes when ipod is connected" checkbox. if i do that and click 'Apply', itunes 7 will simply freeze, and after a while it gave me some error message. that was why i reverted to itunes 6.
so, is there any way i could make my ipod to work with itunes 6? it it helps, i NEVER 'sync'ed my ipod with itunes 6 before. i downloaded itunes 7 right after i bought the ipod last week.
Dell Inspiron 630m Windows XP Pro
Similar Messages
-
Problems with Reverting to an Address Book Backup
I keep my address book updated on my iMac at home that is running OS v10.6 Snow Leopard. At work, I am now using a G5 that is running OS v10.4 Tiger. I have created a +Backup of my Address Book+ at home and brought the .abbu file with me to work so that I could +Revert to an Address Book Backup+ on my G5.
I've done it twice already and I'm still missing vCards (mostly recently added). Also, some of the other vCards have old information. Is there something I'm not doing right? If the solution is to highlight all vCards and +Export vCard...+ then what is the point of +Back up Address Book...+Dear Pat,
Thank you. I have received the exact same reply from Amreso.
I thank you both for your replies. If the problem occurs again, I shall follow your advice.
I just need to pluck up the courage. I get so nervous with the computer when it plays up.
Regards
Anthony
Date: Fri, 19 Apr 2013 02:11:29 -0700
From: [email protected]
To: [email protected]
Subject: Problems with reverting to an earlier version
Re: Problems with reverting to an earlier version
created by Pat Willener in Installing Flash Player - View the full discussion
This is a public forum; please do not post your email address (by sending the entire forum notification message with all its headers back to the forum).
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5250122#5250122
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5250122#5250122
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5250122#5250122. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installing Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Problems with reverting to an earlier version
The update with Flash Player was causing problems, so I uninstalled Flash Player 11 and then installed Flash Player 10. But I now have Flash Player 10 Plugin and FlashPlayer 11 Active X on my computer. I am not sure how this happened, but is this OK or is this going to cause me more problems?
Have now just checked again in Control and it also says I now have Adobe 11 plug in. So I guess I am back to where I started.
I saw my original question but could not find out how to attach this question to it. Sorry.
[email address removed]Dear Pat,
Thank you. I have received the exact same reply from Amreso.
I thank you both for your replies. If the problem occurs again, I shall follow your advice.
I just need to pluck up the courage. I get so nervous with the computer when it plays up.
Regards
Anthony
Date: Fri, 19 Apr 2013 02:11:29 -0700
From: [email protected]
To: [email protected]
Subject: Problems with reverting to an earlier version
Re: Problems with reverting to an earlier version
created by Pat Willener in Installing Flash Player - View the full discussion
This is a public forum; please do not post your email address (by sending the entire forum notification message with all its headers back to the forum).
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5250122#5250122
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5250122#5250122
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5250122#5250122. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installing Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Problem with the back camera in iPhone 4 (Black Shadow)
Hi, I have a problem with the back camera. When turned on I can see a black shadow on one side and when I take the photo, appears in all the photos.
I searched on the Internet to resolve this problem but I haven't been successful. A friend told me that maybe it is dirt that was introduced into the cover but I don't think It's true.
The iPhone haven't dropped me for some quite time and don't crashing.
Look here is a photo to show you how the black shadow looks like:
Please, anyone know what the problem can be?It certainly does work.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
Problem with Portlet Backing Context
Hi,
I am having problem with Portlet Backing context.
I have on portlet and one JPF associated with this portlet.
Now in JPF action method i have Portlet Backing context object, using this object
i tried to get the previous portlet state using portletCtx.getPreviousWindowState().
But It always gives me null.
can anyone help me out ? its very urgent.
or you can suggest me anyother option to do this....
Thanks,
Vijay PatelVijay -
You might want to post this to the Portal newsgroup.
Regards,
Kunal
"vijay patel" <[email protected]> wrote:
>
Hi,
I am having problem with Portlet Backing context.
I have on portlet and one JPF associated with this portlet.
Now in JPF action method i have Portlet Backing context object, using
this object
i tried to get the previous portlet state using portletCtx.getPreviousWindowState().
But It always gives me null.
can anyone help me out ? its very urgent.
or you can suggest me anyother option to do this....
Thanks,
Vijay Patel -
My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one? Someone help please.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost -
Problem with OEM backing up on windows system.
Hi to all,
I have a problem with backing up with a specific user.
I am currently running various "test" db's and am planning to back them up.
The Setup:
Host OS is windows 2003 server s2
Grid control 10.2.0.1
Database 10.2.0.2
Target Db is running on a windows 2003 server
The Situation:
From grid control I locate the db in question and go to the maintenance page and the backup settings. First of all I want to test the backup using the tab. Before this of course I enter the Host OS credentials into the system, let’s say "jamie", and add the appropriate password. By this point I have made sure that the user "jamie" is in the local security policy setting "log on as batch job" and that is in the group ora_dba (This is on both the machine I am backing up from and the target db machine.). For security reasons I have limited the share folder location to the user "jamie", making sure that sharing and security has the appropriate privileges to access the share.
I run a test backup using the tab within backup settings and await the results. The results come back unsuccessful. Reading through the log I see that the path to backup share is denied.
So to further the test I change the privileges within the share to "everyone" and that is for both sharing and security, just to see whether or not it’s the path itself rather than restrictions to the user. It is then a success. I checked to see who actually owned the file that was used within the test. It belonged to the local system on the target db, not to the user that I had specified within "Host OS Credentials".
Can anyone explain to me why and what is the reason behind putting in Host OS Credentials when the agent that is committing the back up is using the local domain system user account. I am aware that the Agent is part of a service within windows and belongs to the local domain. Ergo, why have host credentials.
And can anyone help me out with getting round this predicament if I still want security within the systems. I can’t just leave access to the share under "everyone", that'd be a really big hole in the system?!
Any help at all will be gratefully received.
If you’ve got any questions to help me solve the problem, please fire away.You may want to take a look at these metalink notes:
Ref.
Subject: ERROR in RMAN to Write to Shared Drives on Windows NT/2000
Doc ID: Note:246107.1 Type: PROBLEM
Last Revision Date: 08-JUL-2004 Status: PUBLISHED
Subject: How to Configure RMAN to Write to Shared Drives on Windows NT/2000
Doc ID: Note:145843.1 Type: BULLETIN
Last Revision Date: 21-OCT-2005 Status: PUBLISHED
~ Madrid
http://hrivera99.blogspot.com/ -
Problem with the back button in the Alv ouput
i have refresh button in output of my alv report when i click on this it is getting refreshed ,now the problem is with the back button after refresh whn i click on back button it is not going to selection screen , i have to click the back button thrice to come out to the selection screen ,if have refreshed the ouput screen twice .
if i dont refresh the back button is working fine , So i have used "call to selection screen 1000" it coming to selection screen without any problem but in selection screen on clicking on back button it is again going back to output screen ,So please suggest what has to be done here .Hi Brahmananda,
Please try to understand the flow of program and the screen navigation
the click of BACK button triggers PAI and (to the best of my knowledge) you might have called the ALV screen number without any checks ( may be) so it is again taking to the ALV.
try using
in PAI
module exit at exit-command
in program
module exit
case ok_code
when 'BACK'.
LEAVE PROGRAM ( or any thing that you want it to be )
endcase
endmodule
regards
Ramchander rao.K -
Problem with getting back "synchronous" process result!!!
i have created the partner link to my synchronous process which is already on the server, along with the input and output variable for dealing with that particular process...
my input variable matches the xml schema of my synchronous process... when i expand the input variable node, i can see the elements which i'm trying to pass as the input to my synchronous server.
HOWEVER!!! there's a problem with my output variable, clicking expand on the node, it displays nothing (basically it's suppose to be in the format of the xml schema which i have specified).. hence i cannot work with the output of the asynchronous process...
cheers,
Shivek
how do i fix this problem..can you please provide little bit more details? where do you click output variable? are you clicking from bpel console debugger?
-
Im facing problem with my back camera.it's keep on hanging
PLease help me fix my problem regarding my back camera because it keeps on hanging.please help solve this problem.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost -
Hi all,
I need a suggestion on a program created by me, when I launch
the program, which is a transaction in which the inside there are
buttons that are related to the programs, when accessing a program,
if I press the BACK button does not return to main screen of the
transaction but to the main screen of SAP. Taking a ride in debug,
I noticed that because of the management SUBMIT BACK in a sense,
the neglect,
how can I avoid this?
Best regards.i have a similar problem. am using ipod video 30GB enhanced 5th gen. i tried to sync with itunes 6, but i got something like this - "your device requires the latest version of itunes. please install itunes 7"
the problem is, i installed itunes 7 but i could hardly update my ipod. not even to uncheck the "open itunes when ipod is connected" checkbox. if i do that and click 'Apply', itunes 7 will simply freeze, and after a while it gave me some error message. that was why i reverted to itunes 6.
so, is there any way i could make my ipod to work with itunes 6? it it helps, i NEVER 'sync'ed my ipod with itunes 6 before. i downloaded itunes 7 right after i bought the ipod last week.
Dell Inspiron 630m Windows XP Pro -
Problem with exporting back to LR from PS
I exported a photo to PS as always for and edit but when I was done it didn't go back to LR. I can only open from PS. How do I get it back to LR and why did this happen?
Hi Le,
Sound familiar; here in The Netherlands we have the same problem. That is why we use the English versions for XP and Office.
I don’t quite understand how you interface to Excel. Directly with ActiveX or through a CSV file.
Can you explain a bit more ? -
Problems with automatically backing up ebooks
Hi,
I just started using Adobe Digital Edition several days ago with version 1.5. And there is a "ebx_backup" folder under "My Digital Editions" which stores the automatically backed-up ebooks files. But yesterday, after i download the new version 1.6 and purchased several others new ebooks afterward, they are no longer automatically backed up and doesn't appear in the "ebx_backup" folder. Is it a bug? How can i solve it? Or can i manually move the .pdf ebooks from "My Digital Editions" to "ebx_backup" folder?
Thank you.
YiqingHave you had a chance to look at this troubleshooting page? It may be of some help: "Disk cannot be read from or written to" when syncing iPod
-
Problem with holding back button to flash phone
I cant intall xrecovery. I tried many tutorials. It just do not work when i hold/ spam click back button at white sony logo. I cant even reintall my soft using SUS, becouse nothing is going on when i press back button (according to SUS instructions). What am i doing wrong? I have X10 pro mini with 2.1-update1 2.1.1.A.0.6, core version 2.6.29 SEMCUser@SEMCHost #1. Any tutorial i try, i copy xrecovery files to my system/bin foder and pressing back button does not work. I wonder why, in SUS update holding back does not work also... So just standard sony ericsson animation appears after while. Please help me, i am stuck from month now.
*Moved to Android development*
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
Problem with getting back my library after reinstalation
seems sth's wrong with update. My question is if I'll get back my libraries after reinstalation. I copied all of my libraries to my comp to seperate file.
my error also showed dll file missing, after instaling dll fixer my error is 1114 and r6034
PLEASE HELP!!! i spent year selecting music to libraries :-(Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2
Maybe you are looking for
-
4gLTE checking Window Mounts/recharging
I just bought a 4gLTE mobile hot spot and it is fantastic. I am working on it 8 hours a day and it's great. I am noticing one thing that does not work the same on a hard wired connection. I know this will be difficult but I just want to see if an
-
How to assign attribute values to a range of BPs ????
Hi All, While assigning attribute values to business partners we can specify at the most one business partner at a time. My requirement is to assign attribute values to a range of business partners at a time. Is there any customization setting w
-
Iphone 5 WiFi bug....
My Iphone 5 will not connect to my wifi at work, any ideas of how to fix this?
-
I'm working with trial version of Photoshop Elements 12. Layer functions remain grayed out when trying to use them.
-
Hi there, I am struggling a little with the addresses of the business partner. I am aware that the addresses are stored in CRD1 and that the key ADDRESS is identical with the BILLTODEF in OCRD für the Bill-to address. We now have updated the field BI