Problem with running cpu at the rite speed!!

hi everyone,
i just change my mb to KT3-Ultra a month ago( i had a asuu A7V266-E before) with amd Athlon 1700+ everything work fine and runs very smooth on my windows xp ...but! i just find out that my cpu is just running at 1.10 ghz. after i change the setting in bios to 1.53 ghz which i believe is the rite speed for athlon 1700+, i was unable the finish 3d mark2001 se testing and the xp become unstable ( had a radeon 7200 card, i could finish the testing in 1.10 ghz and only have 256 ddr ram rite now...low score)so....i was wondering why is this happening and what else can i do to run my system stable at 1.53 ghz.....btw i was running 1.53 ghz on my asus board.....thx alot!!

Hi!
The normal speed for the 1700+ is 1.46 GHz, and that is also the speed you will get if you will set fsb to 133, instead of 100 (1.10 * 133). You will not arrive at 1.53 GHz.
Hans

Similar Messages

My MacBook Pro is running slowly. I run Mountain Lion on it. I received the following report from Etrecheck. Can someone help me decipher it and provide me with steps to fix the slow speed?

My MacBook Pro is running slowly. I run Mountain Lion on it. I received the following report from Etrecheck. Can someone help me decipher it and provide me with steps to fix the slow speed?
Problem description:
slow computer
EtreCheck version: 2.0.11 (98)
Report generated November 15, 2014 2:57:16 PM EST
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 - VRAM: 384 MB
NVIDIA GeForce GT 650M - VRAM: 512 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 6 days 7:45:47
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (25.67 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Rowmote Helper.app
[loaded] com.regularrateandrhythm.driver.RowmoteIREmu (1.0 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.smarttech.iokit.SMARTBoard (11) Support
[not loaded] com.tectona.driver.PL2303 (1.3.0) Support
[loaded] com.webroot.driver.WebrootSecureAnywhere (54 - SDK 10.7) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.accountsd.plist
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.lookupd.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.coresymbolicationd.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.smarttech.boardservice.plist Support
[running] com.smarttech.floatingtools.plist Support
[running] com.smarttech.ink.plist Support
[running] com.smarttech.SBWDKService.plist Support
[running] com.smarttech.smartnotification.plist Support
[running] com.smarttech.systemtrayicon.plist Support
[running] com.webroot.WRMacApp.plist Support
[running] com.webroot.WRMacBackNSync.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.regularrateandrhythm.rowmotehelperaide.plist Support
[running] com.webroot.security.mac.plist Support
[running] com.webroot.webfilter.mac.plist Support
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service UNKNOWN (missing value)
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Spotify Application (/Applications/Spotify.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
Rowmote Helper Application (/Applications/Rowmote Helper.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
npwebroot: Version: 2.0.15 Support
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.1
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 4.5.1f3 - SDK 10.6 Support
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 51 Check version
Safari Extensions: ℹ️
Password Manager
webfilter
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
SMART Board Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      3% WindowServer
      2% iPhoto
      2% mds
      2% mdworker
      1% Google Chrome
Top Processes by Memory: ℹ️
382 MB Mail
275 MB WebProcess
107 MB Google Chrome
103 MB WindowServer
99 MB Google Chrome Helper
Virtual Memory Information: ℹ️
270 MB Free RAM
1.50 GB Active RAM
1.30 GB Inactive RAM
1.22 GB Wired RAM
20.97 GB Page-ins
8.64 GB Page-outs

Hi Linc
I hope this is what you were after. Looking forward to hearing your feedback.
Thanks, Susanna.
11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9b606ce0> { count = 2, contents =
"query" => <string: 0x7fbb9b605720> { length = 109, contents = "com_apple_ats_name_postscript == "Roboto-Regular" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9a41d950> { count = 2, contents =
"query" => <string: 0x7fbb9a41d2e0> { length = 108, contents = "com_apple_ats_name_postscript == "Roboto-Medium" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9b102580> { count = 2, contents =
"query" => <string: 0x7fbb9b100580> { length = 107, contents = "com_apple_ats_name_postscript == "Roboto-Light" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9a41d1d0> { count = 2, contents =
"query" => <string: 0x7fbb9a41d2e0> { length = 106, contents = "com_apple_ats_name_postscript == "Roboto-Bold" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91723 [cfprefsd]
11/16/14 12:36:03.784 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91721]) Exited: Killed: 9
11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91721 [SleepServicesD]
11/16/14 12:36:08.471 PM com.apple.launchd.peruser.501[159]: (com.apple.tccd[91730]) Exited: Killed: 9
11/16/14 12:36:08.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91730 [tccd]
11/16/14 12:36:09.592 PM com.apple.launchd[1]: (com.apple.xpcd.F5010000-0000-0000-0000-000000000000[91727]) Exited: Killed: 9
11/16/14 12:36:09.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91727 [xpcd]
11/16/14 12:36:13.129 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[91728]) Exited: Killed: 9
11/16/14 12:36:13.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91728 [XType.FontHelper]
11/16/14 12:36:14.996 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91739]) Exited: Killed: 9
11/16/14 12:36:14.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91739 [SleepServicesD]
11/16/14 12:36:20.120 PM com.apple.launchd[1]: (com.apple.cfprefsd.xpc.daemon[76618]) Exited: Killed: 9
11/16/14 12:36:20.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76618 [cfprefsd]
11/16/14 12:36:23.433 PM com.apple.launchd.peruser.501[159]: (com.apple.cfprefsd.xpc.agent[76616]) Exited: Killed: 9
11/16/14 12:36:23.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76616 [cfprefsd]
11/16/14 12:36:26.261 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91752]) Exited: Killed: 9
11/16/14 12:36:26.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91752 [SleepServicesD]
11/16/14 12:36:37.691 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91764]) Exited: Killed: 9
11/16/14 12:36:38.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91764 [SleepServicesD]
11/16/14 12:36:48.938 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91777]) Exited: Killed: 9
11/16/14 12:36:49.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91777 [SleepServicesD]
11/16/14 12:37:01.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91788 [SleepServicesD]
11/16/14 12:37:00.821 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91788]) Exited: Killed: 9
11/16/14 12:37:04.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91706 [distnoted]
11/16/14 12:37:15.656 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91795]) Exited: Killed: 9
11/16/14 12:37:15.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91795 [SleepServicesD]
11/16/14 12:37:27.016 PM ReportCrash[91819]: Failed to create CSSymbolicatorRef for Webroot SecureAnywhere[264]
11/16/14 12:37:27.125 PM ReportCrash[91819]: Failed to create dSYM-less CSSymbolicatorRef for Webroot SecureAnywhere[264]
11/16/14 12:37:27.487 PM com.apple.launchd.peruser.501[159]: (com.webroot.WRMacApp[264]) Job appears to have crashed: Segmentation fault: 11
11/16/14 12:37:30.336 PM com.apple.launchd[1]: (WSDaemon[61]) Exited abnormally: Broken pipe: 13
11/16/14 12:37:34.295 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
11/16/14 12:37:34.594 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.30 seconds (server forcibly re-enabled them after 1.00 seconds)
11/16/14 12:37:37.648 PM ReportCrash[91819]: Saved crash report for Webroot SecureAnywhere[264] version 8.0.7.78 (8.0.7.78) to /Users/landerson/Library/Logs/DiagnosticReports/Webroot SecureAnywhere_2014-11-16-123737_lukes-MacBook-Pro.crash
11/16/14 12:37:42.660 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
11/16/14 12:37:43.632 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.97 seconds (server forcibly re-enabled them after 1.00 seconds)
11/16/14 12:37:50.783 PM WSDaemon[91822]: CGSRegisterConnectionNotifyProc called with invalid connection
11/16/14 12:38:09.909 PM Problem Reporter[91853]: launch_msg returned m

Hello , please am having a problem with my iphone 5 , the battery runs out quickly , also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out , and my final problem is that is "no service " appears a lot can you help ?

Hello , please am having a problem with my iphone 5 , the battery runs out quickly ,another problem also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out . My final problem is that "no service " appears a lot especially when opening wifi or 3G , can you help ?

Your battery is running quickly because your cellular data connection is weak.
Is your phone carrier a supported carrier: Wireless carrier support and features for iPhone in the United States and Canada - Apple Support
For your no service issues: If you see No Service in the status bar of your iPhone or iPad - Apple Support

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

Hi Arika,
The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
All these drivers are available for downloading on ni.com. To get the drivers, go to ht
tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
I hope this information helps.
Best Regards,
Wilbur Shen
National Instruments

Problem with running the midlet class (Error with Installation suite )

hi everyone...
i have problem with running the midlet class(BluetoothChatMIDlet.java)
it keep showing me the same kind of error in the output pane of netbeans...
which is:
Installing suite from: http://127.0.0.1:49296/Chat.jad
[WARN] [rms ] javacall_file_open: wopen failed for: C:\Users\user\javame-sdk\3.0\work\0\appdb\delete_notify.dat
i also did some research on this but due to lack of forum that discussing about this,im end up no where..
from my research i also find out that some of the developer make a changes in class properties..
where they check the SIGN DISTRIBUTION...and also change the ALIAS to UNTRUSTED..after that,click the EXPORT KEY INTO JAVA ME SDK,PLATFORM,EMULATOR...
i did that but also didnt work out..
could any1 teach me how to fix it...
thanx in advance... :)

actually, i do my FYP on bluetooth chatting...
and there will be more than two emulators running at the same time..
one of my frens said that if u want to run more than one emulator u just simply click on run button..
and it will appear on the screen..

I have problem with my iphone 5 the battery still running so fast

i have problem with my iphone 5 the battery still running so fast

Click the link below choose your country then choose service and see if you have an Apple Authorised Service Provider in your country.
https://locate.apple.com/au/en/
If you dont have any Apple Authorised Service Providers near you either then contact AppleCare and ask them for options for postage in your country/region. You can find the number for your country below:
http://support.apple.com/kb/HE57
Hope this helps

I ve a problem with running the javabeans

dear all
i ve a problem with running javabean in forms 9i all codes, program units are correct. i think there is something with classpath which i dont where to put the path of bean jar files. however the simple code for the Colorpicker and keyFilter dont work when clicking the button to fire the trigger to bring the bean up.
thank you
Walaa eddien

Walaa,
Make sure you've entered the implementation class (do not append the class extension). For example, if you have a class example.class in the package otn.oracle.forum, the implementation class should be: otn.oracle.forum.example
Make sure you place the containing java archive in <OH>/forms90/java and do not forget to update the configuration section (default or app specific) parameter archive_jini accordingly.
Jeroen van Schaijk

Hallo Apple, what does it mean this Message0x7fff7500b300 resumeBackgroundConversion: background conversion started/resumed for lv 82832E6C-B6AC-46A6-8836-715414EBE8F4. Because I have a Problem with my CPU: Kernel_task and corestoraged

Hallo Apple,
what does it mean this Message0x7fff7500b300 resumeBackgroundConversion: background conversion started/resumed for lv 82832E6C-B6AC-46A6-8836-715414EBE8F4.
Because I have a Problem with my CPU: Kernel_task and corestoraged.

I'm having this same issue. I also have this line in my log, which is curious:
12/14/14 7:13:07.822 PM netbiosd[16766]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.smbd
Is this related to the problem? What does it mean?
My 2010 27" iMac running Yosemite won't wake up from sleep.

MacBook Pro 15 with Windows 8.1 installed via Boot Camp problem with keys "@" and " " of the keyboard

Hello,
I have a MacBook Pro Retina Maverick in 2013 on which I installed Windows via Boot Camp 8.1.
The installation went well but when I am running Windows 8.1, I have a problem with "@" and "<" keys on the keyboard.
When I type the "@" key, I get "<"
When I type the "<" button, I get "@"
I have reinstall Boot Camp from Windows 8.1 for reinstall the drivers and see if it would solve the problem but it was not the case.
Someone of you has he encountered the same problem?
Thank you.

The language of my Keyboard is French

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions?

Oh no! Lets ensure that you are connected. Have you tried to reset the Network Extender? Are other devices able to connect to the Extender? Is your Internet service up and running?
Share details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

Problem with InDesign CC redrawing the screen too slow while using Zoom tool

Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).

Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
The lasso tool should then work normally.

Problem with runas command. Elevation error

Running on Win 8.1 Pro I'm facing a problem with runas.
What I'm trying to do is launch an mmc as my domain admin account.
Therefore I type this command from an elevated cmd (Right-click "Run as Administrator"):
runas /user:Contoso\MyDomainAdmin /noprofile mmc
This worked like a charm in Windows 7, and on my Win81Pro client it yields:
RUNAS ERROR: Unable to run - mmc
740: The requested operation requires elevation.
The account I'm logged in with, is local admin, and the UAC slider is set in the bottom.
In the eventviewer, I only see some special logons where my normal account is trying to impersonate my domain admin account, and the next event, the domain admin's session is destroyed.
If this is by design, how would I then run mmc as my domain admin and at the same time avoid its credentials being stored on the local machine?
Thanks in advance!

yes, you need to be local admin to be able to elevate!
I've tested this on a system here and I reproduce the issue you encountered. Some investigation showed running a program that requires elevation using runas is not possible http://msdn.microsoft.com/en-us/library/bb756922.aspx
MCP/MCSA/MCTS/MCITP

Problems with Photoshop cs4 for the Mac

I am having all kinds of problems with Photoshop CS4 for the Mac. When I boot the software it seems to work for a while then, I am unable to open upf a file in Photoshop. I drag a photoshop file over the application icon, the whole screen flickers and nothing happens. I am unable to quit Photoshop as the quit choice is grayed out and command-q will not make it quit. I have to force quit. I can repeat this pattern over and over. What is happening? How do I solve this problem?
--Kenoli

Thanks for the reply. I am using Photoshop 11.0.1. I am using the latest version of Snow Leopard. I have found both Photoshop and Dreamweaver to be pretty buggy for several versions now. My suspicions were that they were really engineered for Windows and never really fully implemented for the Mac. Dreamweaver crashes or hangs on me three or four times a day if I us it all day and does various annoying things like refusing to respond to the delete key after I have used it for a while. I have pretty much stopped using it to some degree for that reason and also because there is other software that does a lot of coding things I do much more directly and simply. Also Dreamweaver always seems to struggle to quit when I tell it to quit (that is, it takes a long time and gets hung up at places before it quits) and once it does quit, I always get a message saying that it has unexpectedly quit (even when I have told it to quit).
The problems with Photoshop (starting with just taking a long time to load) have escalated to the point I described today, which makes it almost unusable. I just reinstalled Snow Leopard to see if there was anything buggy in the system software. I will report if problems go away.
Regarding both the refusal to open image files and the grayed out quit command, made me think something like you, i.e. there was some dialogue box open somewhere. However, I couldn't find anything and I don't use two monitors.
So . . . Adobe just seems to be getting more expensive and more buggy.
Incidentally, why is it still running in Rosetta rather than natively? Adobe now has a real Intel processor to work with.
--Kenoli

Problems with "no color" in the "Fill and Stroke"

I am having problems with “no color” in the “Fill and Stroke” function of Flash CS4 Pro.
I had been using CS4 for 10 days and everything worked fine. Then I tried experimenting with various color combinations (along with “no color”) for “Fill and Stroke” for a simple button. Suddenly CS4 locked up on me while I was working with the “color panel”. A second color panel appeared in the upper left corner and the program was not responding. All I could do was to end the CS4 task.
After that, whenever I created even a simple rectangle, at first the colors would appear as indicated for “Fill and Stroke”, but when I selected the object to see its properties, either the stroke or the fill color box would have a red slash line, indicating a “no color”, and I couldn’t select the color box to change it using the ink bottle tool, although the other box worked fine.
Rebooting did not help. So I uninstalled CS4 (and didn’t keep the preferences), rebooted, then reinstalled it. The problem was still there. Logging on as another user didn’t help. I tried restoring the Windows system to before I installed CS4 and resinstalling it and that didn’t work. I have a disfunctional CS4 now and I don’t know what to do to fix it. Please help me. Thank you.

Have you updated flash to 10.0.2? Have you played around with a bunch of different selections, objects, and so forth to see if this box is always incorrect? I think there's some particular selection (order of selecting things, and so on), where the color swatches in one location don't work as expected. However, it should not happen all the time and from what I recall it was fairly easy to work around (I can't even figure out what this was - so probably not it, as it seems hard to run into or perhaps now fixed).
Also make sure you have the stroke selected - if you don't have everything selected, either the fill or stroke will show no color and dim depending on the selection.

[SOLVED] Problem with running GUI apps as root

Hi,
I have a serious problem with running any kind of software having GUI as root, which is indispensable for editing system files. For example I want to edit /etc/pacman.conf file with KWrite, and here's what I get
[zbyszek@barca ~]$ xhost +
access control disabled, clients can connect from any host
[root@barca zbyszek]# kwrite /etc/pacman.conf
kwrite(11282): Session bus not found
KCrash: Application 'kwrite' crashing...
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
sock_file=/root/.kde4/socket-barca/kdeinit4__0
Warning: connect() failed: : Nie ma takiego pliku ani katalogu
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
drkonqi(11284): Session bus not found
Can anyone help me with this? Can anyone tell me how to login as root?
Thank you in advance.
Last edited by Zibi1981 (2010-10-05 19:30:20)

O.K., but how to run KWrite as root on my account??? That was my main question
karol wrote:
Try running 'xhost +' as root.
https://bbs.archlinux.org/viewtopic.php?pid=817674
Maybe vim is in edit mode when you press 'i' but it doesn't show '-- INSERT --' at the bottom of the screen.
Here you are
[root@barca zbyszek]# xhost +
access control disabled, clients can connect from any host
[root@barca zbyszek]# kwrite /etc/pacman.conf
kwrite(12941): Session bus not found
KCrash: Application 'kwrite' crashing...
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
sock_file=/root/.kde4/socket-barca/kdeinit4__0
Warning: connect() failed: : Nie ma takiego pliku ani katalogu
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
drkonqi(12942): Session bus not found
Last edited by Zibi1981 (2010-09-25 10:19:50)

Problem with running cpu at the rite speed!!

Similar Messages

Maybe you are looking for