Problem with running Premiere Elements 12 for the first time.

I have just purchased a download version of Premiere Elements 12.0 and have installed it on my PC running on Windows 7 (64 bit). On first running Elements, however, the program gets stuck on loading "mveH264Exporter.prm" and proceeds no further. I've tried uninstalling and reinstalling, but same problem. I previously had Elements 10 installed and that was working. Any advice offered would be appreciated.

First we need to check , whether the LAN settings is set to detect settings Automatically or not.
Follow below steps .
1)Open Control Panel and then click on the option "Network and Internet" .
2)Click on Internet options, click on 'Connections' tab.
3)In the 'Connections' tab, select 'LAN' settings, you will be able to view the Local area network settings box.
4)Check the box-"Automatically Detect Settings" and then "uncheck" all the other check boxes like 'Use automatic configuration script', 'Use a proxy server' , Bypass proxy server' ,then click on ok button .
5)Click on "LAN settings" button again , make sure "Automatically Detect Settings" is the only option selected, keep the LAN properties window open.
Then launch Premiere Elements 12 and try to sign in.
If the settings were already set like that or you face same issue after signing in , let me know

Similar Messages

Trying to open Premiere elements 12 for the first time even though I had it loaded for a while. It gives me a message that I need to be connected to the internet (which I am) or that my clock is off (it is correct). Any suggestions?

Trying to open Premiere elements 12 for the first time even though I had it loaded for a while. It gives me a message that I need to be connected to the internet (which I am) or that my clock is off (it is correct). Any suggestions?

First we need to check , whether the LAN settings is set to detect settings Automatically or not.
Follow below steps .
1)Open Control Panel and then click on the option "Network and Internet" .
2)Click on Internet options, click on 'Connections' tab.
3)In the 'Connections' tab, select 'LAN' settings, you will be able to view the Local area network settings box.
4)Check the box-"Automatically Detect Settings" and then "uncheck" all the other check boxes like 'Use automatic configuration script', 'Use a proxy server' , Bypass proxy server' ,then click on ok button .
5)Click on "LAN settings" button again , make sure "Automatically Detect Settings" is the only option selected, keep the LAN properties window open.
Then launch Premiere Elements 12 and try to sign in.
If the settings were already set like that or you face same issue after signing in , let me know

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

System Failure while running Adobe Dreamweaver CS6 for the first time..Why?

When i downloaded the adobe dreamweaver cs6 and during installation ... there is no wrong except screen resolution (required = 1280*800 but available = 1330 * 768)
But when i tried to run the program for the first time, the system had failed.
Can you help me to know the true cause, please?
note: i use Windows XP sp1

CS6 requires a minimum of Windows XP with Service Pack 3. Your vertical resolution also does not meet the minimum requirements.

Can I sync my 'PC Free' activated iPhone with downloaded apps to iTunes for the first time without loosing data?

I have an iPhone 4 that has been activated over the air, "PC Free" and have used it for a month without ever connecting it to a computer. I have downloaded several apps, taken a few pictures, and even downloaded a few songs. Now I want to connect to my computer and sync and backup. Will I loose all my data?

Before you connect to a new PC, make sure that autosync is disabled in Edit/Preferences/Devices, otherwise her phone will be wiped during the following sync.
If she has data on the phone she wants to save, back up manually:
Disable autosync in iTunes, connect your phone to her new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing. Transfer the purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
About backups and what's saved:http://support.apple.com/kb/HT1766
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Transferring data is also covered here: http://support.apple.com/kb/HT4137

Need help with Adobe Premiere Elements 9 for the Windows XP PC

Just got it today, so I could make my own video and audio files from pre-existing ones. I first used a version of Adobe Premiere back in school in the '90s, and seemed to easily make them there, while not working on school work. There was a row for inserted video, and a row below that for inserted audio. I'm out of college currently, and just bought Elements 9, as said, but am struggling with it. Could someone please tutor me to get me started? Perhaps even talk over the phone? I'm trying to combine different video and audio tracks into a new singular video/audio file.
Thanks in advance.
>>
Welcome to the forum, but unfortunately, you have posted to the Premiere Pro, CS 4 and Earlier forum.
Instead, you should post to the PrElements Forum, as few here will know anything about PrE 9.
Now, the starting secret of PrE is your Source Files. Can you tell us the full details of those?
Next, matching those to the correct Project Preset, is the next step. Can you tell us what you chose at New Project?
For a list of some of the resources for learning PrE, see this ARTICLE.
Good luck,
Hunt
>>
What are Source Files? You mean the videos I'm using? The main one is here:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Two to four additions to it will be used with video parts from here:
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
And my first project is a .prel file. Is that what you meant?
Is it possible I could get assistance over the phone?
Thanks.

I created a more precise list of what I wish to combine to make one new video program:
Audio:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:00 - 0:33) (All)
Video:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:00 - 0:08)
Fade to
Transformers_S2.mpg (0:31 - 0:33)
Fade to
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
Rodimus.mpg (0:00- 0:08) (Note: Should start after grey jet passes by on top of screen (less than a second in), and stop after blue robot tramples over the other two robots, cutting off the part where he's shot at from the sky, and all that afterward.)
http://www.youtube.com/watch?v=5yd1OmZvU8w
(1:34 - 1:38) (Note: Should start as soon as video beings, and end when the four side robots are shooting their laser guns, and the one in the middle shoots his shoulder-cannons, cutting off the part with the bridge and missiles, and everything else afterward.)
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
trypt.mpg (0:15 - 0:16) (Note: Only shows the brief second or two where the five robots quickly transform to one big robot.)
http://www.youtube.com/watch?v=h23kRJ9i058
(5:22 - 5:25) (Note: Should start with all 5 robots appearing onscreen, and end with them, in a combined robot, firing at the screen, cutting off the white laser-shooting base/battle-station and everything else afterward.)
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:23 - 0:33) (Note: Should start with lava-flowing ending, and lined-walkway appears, and goes to the end.)
Not sure if I can get all of these videos in, in the 33 second time limit. I'm willing to cut either the trypt.mpg clip, and/or the youtube link-clip below it.
I have a youtube downloader program, so no worries there. Also need to know how to cut video so I can make these clips that are from youtube and tfarchive.
I also want the video to contain the same quality as shown from each file here, and all fit the size of the largest file (the youtube one, I think it is).
Please LMK how to do this, and if any of this is unclear. Things like this are all I really want to use APE9 for, so I won't be asking much else here.
Thanks.

Another problem when trying to open iTunes8 for the first time

I have just downloaded iTunes8 and after the installation received the message: - "iTunes has been installed successfully./"
However, when trying to open it, I too have a problem and the message I get is: - "iTunes cannot run because some of its required files are missing. Please re-install iTunes."
The previous version ran OK and I have de-installed it and re-installed it 3 times and each time I get the same message that it has been installed successfully but the same message sayind ome files are missing when I try to open it.
I have checked the QTime is up to date and it is. Anyone else had this problem?

I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

HT1338 Problems of getting Windows installed successfully for the first time...

My brand new hardware of Apple imac desktop OS X Mavericks serial no: C0*******8J5 is having a problem of installing Windows 8.1 despite I downloaded many bootcamp and other updates of software as advised by my Singapore Apple specialists. Can you provide me good links of what I should do because I am still struggling for almost one month already?
<Personal Information Edited by Host>

http://www.apple.com/support/bootcamp/

Opening photoshop elements 11 for the first time

There is not enough room to enter the entire seriel number, what do I do?

Hi Sewwatt,
It seems like you are trying to enter the redemtion code in the serial number box.
Please refer to the below link in order to get the serial number.
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
Regards,
Prabs

Trying to sign into Itunes 9.2.1 for the first time

Hi All
Trying to sign in to itunes store (9.2.1) with a new Apple ID for the first time but it says - Apple ID has not been used with Itunes, please review account information but when i hit continue it just says Session has timed out - searched for answers but nothing has worked so far. Anyone experienced this?
We know the new Apple ID is OK because we can sign into the account outside of itunes, and we know itunes store is working OK because we can sign in with a different old Apple ID account.
I'm on a 2.3 Dual G5 running 10.4.11
Many thanks
Russ

They must have given in to pressure and done something about that because 9.2.1 is working fine with the store now.
I fixed the issue - I had deleted the iTunes cookies as i'd seen suggested in other related posts but I had a dumb moment and didn't restart after I'd done it -
For anyone else looking here with the same problem -
Delete cookies
Close itunes
Restart mac
Sign in to iTunes store
Fixed!
seems weird though how it would work fine with one apple ID but not the new one until I did that. .???
Cheers anyway - hope I've helped someone else out with this too
R

I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR

Problem with Adobe Premiere Elements 10 : error DW046

Dear community members,
I have bought Adobe Premiere Elements 10 and installed it from the DVDs on my MAC OSX10.5.8 on december 27, 2013
When creating a new project , I get the following message :
following a serious error, Premiere Elements 10 must stop
Then I click OK and I get a new message :
The Premiere 10 application has closed suddenly after having been rebooted
Then I end up to the error report window. I have sent the error report to Apple ( I can send it to you if you want)
I have also got the following error message :
DW046 : following conflicting process were running, block : dynamiclinkmanager
Notice : it seems this problem is occuring since I underwent a power failure while working on a project. When I want to open an existing project I get the following message :
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
When I say YES, I save it and it comes back to the welcome menu and I cannot see this project.
I have tried to deinstall and reinstall Premiere 10 : this is impossible since I am required to deactivate dynamiclinkmanager that I cannot find.
Notice that Adobe AIR is unable to find a solution whilst it recognizes there is a problem.
Thanks you for your help

AT Romano,
The various links you have provided were very helpful. I could kill the dynamiclinkmanager.
It seems that it is now working.
Thank you, your reply was very quick and your advices very good
Kitaguchi38
Date: Wed, 1 Jan 2014 19:39:00 -0800
From: [email protected]
To: [email protected]
Subject: problem with Adobe Premiere Elements 10 : error DW046
    Re: problem with Adobe Premiere Elements 10 : error DW046
    created by A.T. Romano in Premiere Elements - View the full discussion
kitaguchi38
When you get the message
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
Do you go to the last AutoSave to open that or do you go to the save location of the project file (project.prel) to open that file?
Are you getting message to close the dynamiclinkmanager so that you can move forward?
If so, please check out dynamiclinkmanager location in the following link
http://helpx.adobe.com/photoshop-elements/kb/preference-file-locations -photoshop-elements.html
Have you seen this Photoshop Elements Forum thread with the same DW046?
http://support.muse.adobe.com/message/4771879
More later.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972397#5972397
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972397#5972397
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972397#5972397. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Problem with Adobe Premiere Elements 12 using Scary Halloween template

I'm having a problem with Adobe Premiere Elements 12 using Scary Halloween template under Menu Theme. My problem is the red line is default to Scenes. I would like it to default to Play. How can I do that? Is it a bug?
Side Note: Other template default to Play Movie
Thanks

jeffrey caban
No bug. Just the way the .psd for the Scary Halloween template was put together.
You are going to have to get into the .psd for the Scary Halloween template and rearrange the
Layer Sets. Do you know how to do that? If not, I will give you very specific instructions on how to
do that.
You want the order of the Layer Sets to look like
That is what worked for me just now to get the disc menu Preview to open to the main
menu with the red highlight under Play.
We will be watching for your reply.
ATR

Big problems with installion Premiere Elements und Photoshop Elements 12

Big problems with installion Premiere Elements und Photoshop Elements 12 auf Windows 7, shared technologies not found. Tried all tips and notes from the community (6 hours work), nothing helped./
Habe Riesenprobleme mit Installation Premiere elements und PS elements 12, gemeinsam genutzte Technologien werden nicht installier, habe alle Hinweise aus den Foren bereits probiert (6 Stunden Arbeit). Wer weiß wirklichRat?

Select a topic, then click I STILL NEED HELP to start Premiere Elements Online chat
-http://helpx.adobe.com/contact.html?product=premiere-elements

Problem with running Premiere Elements 12 for the first time.

Similar Messages

Maybe you are looking for