Problem with same layout (variant) for two ALV Grid and ALV Tree
Hello!
I have two docking containers on the screen. On the left i have cl_gui_alv_tree, on the right cl_salv_table.
When a user set a default layout for ALV Grid (or ALV Tree), raport starts and sets this layout in both objects (tree and grid).
How to avoid this?
Hi,
Take Two radio buttons.
First radion button display the two containers in grid format,
second radio button display the two containers in tree format base on user selection.
CREATE OBJECT G_DOCING_CONTAINER
EXPORTING PARENT = G_CUSTOM_CONTAINER."G_CONTAINER.
DISPLAY THE DATA IN GRID FORMATA
CREATE OBJECT r_grid
EXPORTING
i_parent = G_DOCING_CONTAINER
CALL METHOD g_docing_container->set_width
EXPORTING
width = 1300.
DISPLAY THE GRID DATA IN SECOND CONTAINER
CREATE OBJECT r_grid1
EXPORTING
i_parent = G_DOCING_CONTAINER
CALL METHOD g_docing_container->set_width
EXPORTING
width = 1300.
OTHERWISE WE CAN DISPLAY THE TWO CONTAINERS DATA IN A GRID FORMAT
CREATE OBJECT g_tree
EXPORTING
parent = g_docing_container"g_custom_container
IF R1 = 'X'. "FOR GRID DISPLAY
CALL METHOD r_grid1->set_table_for_first_display
CALL METHOD r_grid2->set_table_for_first_display
ELSE.
************TREE DISPLAY
ENDIF.
regards,
muralii
Similar Messages
-
Display totals on the first line in ALV grid and ALV LIST
Generally we wll display totals at the end..
bu the requirement is to display it in the first line of the column.
how to display the totals in the first line?
I have used ALV GRID and ALV LIST (choice) using function modules.
Plz help me
.for example : Po qty : Should display total po qty on the first line of the Po line item.IN LAYOUT
ILAYOUT-totals_before_items = 'X'.
REGARDS
SHIBA DUTTA -
ALV Grid and ALV List difference?
Hello,
Can you help me differentiate ALV List and ALV grid and the low-level definition or context of each?
Also, can you give me a transaction code that outputs an ALV list as well as a tcode for ALV grid?
Thanks,
JennahHi Kirtish,
Thanks but I havent done any function module stuff as I am not an ABAPer but anyway can you guide me through thios?
"I hope this might slove your query. For more please refer to documentation on ALV and also implement the ALV LIST and GRID reports. By using class Class CL_GUI_ALV_GRID, Function module REUSE_ALV_LIST_DISPLAY , REUSE_ALV_GRID_DISPLAY and some more functions like that only."
I will give you some tcode can you please try tcode FBL1n? then execute the report. What is the output is it an ALV list?
I wish to see an ALV list also an ALV grid to see difference.
Tjhakns,
Jennah -
Problems with Time Machine backup for two machines to one external drive
I have a brand new WD 500GB USB My Book external drive plugged into my Intel Mac Mini running 10.5.1 to use as a TM backup drive (TM reformatted it to HFS+ journaled). The Mini's connected by ethernet to the Airport Extreme. It works great. I setup my wife's MacBook Pro 17" Dual Core 2 w. 10.5.1 for TM using the Mac Mini's TM backup drive and it works fine (a little slower at 811.n wi-fi speeds, but OK). I have the Mac Mini setup in Energy Saver to shut down at night and restart in the morning. The morning after I setup my wife's MacBook Pro for TM I found a big black & white message (in half a dozen languages) on the Mac Mini saying start up failed and I need to reboot using the power button. I did and everything was cool. Now comes the problem, it's done it three days in a row so it looks like there is a problem with the TM setup. It didn't do this before I setup my wife's computer for TM.
Any thoughts on what is causing this? We've had minimal problems with Leopard setup (short of a brief hunt for an Airport Extreme Drive and a couple of network printers during initial setup).1 mistake @ a time wrote:
I works fine over a network if the TM drive is attached to another Mac running Leopard. It won't work with an Airport drive (Apple deep sixed that feature in the final release).
We have an Airport Extreme base station, and we plan to add an Airport Express to boost the power to reach the second floor. We are ordering 4 iMacs, 20", plus I have the Macbook 13" that I have had for a few months.
We thought we could connect one large external drive via firewire cable to one of the iMacs and use it to back up all five computers via Time Machine.
Is that possible, or does everybody need their own external drive?
Thanks!
susan -
I have a friend from Montreal, Canada who is in U.S.A. for 3 months. Her old iPad is not working very well and she thinks about buying a new iPad. Is there any compatibility problem between iPad sold in the States and those one sold in Canada?
http://www.apple.com/ipad/specs/
http://www.apple.com/ipad/LTE/ -
HI all,
Diff between ALV GRID and ALV LIST?
sachin.Hi,
ckeck these differences.
first one is for list display and second one is for grid display.
For all practical purposes, they are the same.
2. Some differences:
a) from abap coding point of view,
alv list is done with Function modules,
alv gris can also be done with FM,
but can also be done using OO concepts.
b) Alv grid (using oo concept) requires
designing the screen layout .
Hence, in one screen, we can show more
then one alv grid
(we cannot show more than
one alv list on one screen)
c) ALV grid uses ActiveX controls
present on the Presentation Server.
Hence, it consumes More Memory
on the presentation server.
d) ALV LIST is Display Only.
Whereas
ALV Grid Can Be made EDITABLE for entry purpose.
e) In alv grid, these options are possible,
but not in alv list.
without horizontal lines
without vertical lines
without cell merging during sorts
display total lines above the entries
ALV LIST Can be coded using only FMs
ALV GRID Can be coded using FMs and object oriented concepts
ALV LIST Can be displayed hieraicharlly
ALV GRID cannot be displayed hierarichally.
reward points if hlpful. -
Multiple ALV Grid Controls per report - problem with default displ.variant
Hi,
I have a report with few screens called sequentialy. Each one of the screens has implemented own instance of ALV Grid Control within custom container, means:
- screen 100 has container Cont100 and grid control "grid100",
- screen 110 has container Cont110 and grid control "grid110"
- screen 120 has container Cont120 and grid control "grid120"
and so on...
Each one of the grid controls is initialized with own field catalog table, with own layout and variant structure definitions. My problem occurs when the user changes the display variant for some of the grid controls and save the layout variant using "default setting" checkbox. In this case next time the program is started all other grid controls behaves like they don't have their own variant definitions, but uses the default setting of the mentioned screen. This leads (usualy) to unsuable grid controls by default, because usualy different controls have no equal field-definition tables. I have the same behaviour even when there are more than 1 ALV grids on a single screen (for example - 2).
For now I don't provide variant variables at selection screen, but it seems there is no way to provide such variables for each one of the grid-controls.
Is anyone aware how to control this? Means no matter if there is default setting in use for some of the grid-controls, how to manipulate other grid-controls not to use this default setting?
Many thanks in advance.
Regards,
Ivaylo Mutafchievcheck this sample code which displays 4 grids in 4 different tabs and with 4 different handles
PROGRAM sapmzsdpp MESSAGE-ID z1.
Table Declarations *
TABLES:
vbpa, " Sales Document: Partner
kna1, " Customer Master
vbap. " Sales Document: Item Data
Tab Strip Declarations *
CONTROLS:
tabstrip_sdpp TYPE TABSTRIP. " Tabstrip
Constants declarations *
CONSTANTS:
c_rep_zm(2) TYPE c VALUE 'ZM', " Outside Sales Representative
c_rep_ve(2) TYPE c VALUE 'VE', " Inside Sales Representative
c_rep_zi(2) TYPE c VALUE 'ZI', " Sales Manager
c_abgru_08(2) TYPE c VALUE '08', " Reason for Rej: SO Not Closed
c_stock_ind_e TYPE c VALUE 'E', " Stock Idctr : Orders on hand
c_gauge(5) TYPE c VALUE 'GAUGE', " Characteristic Name - GAUGE
c_width(5) TYPE c VALUE 'WIDTH', " Characteristic Name - WIDTH
c_gauge_metric(12) " Character Name - GAUGE_METRIC
TYPE c VALUE 'GAUGE_METRIC',
c_width_metric(12) " Character Name - WIDTH_METRIC
TYPE c VALUE 'WIDTH_METRIC',
c_eng_metric(14) " Charac Value - ENGLISH_METRIC
TYPE c VALUE 'ENGLISH_METRIC',
c_coil(4) TYPE c VALUE 'COIL', " For Value COIL
c_spec_bf(7) TYPE c VALUE 'SPEC_BF'," Charac value SPEC_BF
c_wadat_ist(8) " Actual Goods Movement Date
TYPE c VALUE '00000000',
c_mcha(4) TYPE c VALUE 'MCHA', " Database Table 'MCHA'
c_classtype_022(3)
TYPE c VALUE '022', " Class Type : BATCH
c_pipe(2) TYPE c VALUE '06', " Material Pricing Group: Pipes
c_item_ctgry_ztam(4)
TYPE c VALUE 'ZTAM', " Item Cat:Certificate Mnfctr
c_lab_result(10) " Charac Value LAB_RESULT
TYPE n VALUE '0000001392',
c_none_reqd(10) " For Value NONE REQD
TYPE c VALUE 'NONE REQD.',
c_passed(6) TYPE c VALUE 'PASSED', " For Value PASSED
c_pending(12) TYPE c " For Value TEST PENDING
VALUE 'TEST PENDING',
c_bundling(13) " For Value TEST BUNDLING
TYPE c VALUE 'TEST BUNDLING',
c_normal(2) TYPE c VALUE '01'. " Priority: Normal
Internal Table Declarations *
DATA :
Internal table to hold common data for all reports
BEGIN OF t_common_data OCCURS 0,
kunnr LIKE vbak-kunnr, " Customer Number
vbeln LIKE vbap-vbeln, " Sales Document Number
posnr LIKE vbap-posnr, " Sales Document Item Number
ihrez_e LIKE vbkd-ihrez_e, " Mill Order Number
matnr LIKE vbap-matnr, " Material Number
pstyv LIKE vbap-pstyv, " Sales Document Item Category
kwmeng LIKE vbap-kwmeng, " Cumulative Order Quantity
lprio LIKE vbap-lprio, " Delivery Priority
werks LIKE vbap-werks, " Plant
kondm LIKE vbap-kondm, " Material Pricing Group
aedat LIKE vbap-aedat, " Date of Last Change
cuobj LIKE vbap-cuobj, " Configuration
saldata LIKE vbap-zzcust_req_avail,
" Required Availability Date
END OF t_common_data,
Internal table to hold Customer Number
BEGIN OF t_cust_temp OCCURS 0,
kunnr LIKE vbak-kunnr, " Customer Number
END OF t_cust_temp,
Internal table to hold stock details
BEGIN OF t_stock OCCURS 0,
vbeln LIKE mska-vbeln, " Sales Document Number
posnr LIKE mska-posnr, " Sales Document Item Number
matnr LIKE mska-matnr, " Material Number
werks LIKE mska-werks, " Plant
charg LIKE mska-charg, " Batch Number
kalab LIKE mska-kalab, " Valuated Stock
ersda LIKE mska-ersda,
END OF t_stock,
Internal table to hold deliveries
BEGIN OF t_delivery_data OCCURS 0,
vbeln LIKE lips-vbeln, " Delivery Document Number
vgbel LIKE lips-vgbel, " Document No of Ref Document
vgpos LIKE lips-vgpos, " Item No of Ref Item
END OF t_delivery_data,
Internal table to hold released tons & released days
BEGIN OF t_released_tons_days OCCURS 0,
vbeln LIKE likp-vbeln, " Delivery Document Number
btgew LIKE likp-btgew, " Total Weight
bldat LIKE likp-bldat, " Document Date in Document
END OF t_released_tons_days,
Internal table to hold Pre-Production-Pending Orders (Report-1)
BEGIN OF t_pre_prod_ord OCCURS 0,
sortl1 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e1 LIKE vbkd-ihrez_e, " Mill Order Number
salord1(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
days_entry LIKE zlgcyinfo-days_since_entry,
" Days Since Entry
dept LIKE zlgcyinfo-bklog, " Department
notes1 LIKE zcsimemo-text, " CSI File Memo Text
*/ Request No. DV2K904687
chng_date LIKE vbap-aedat, " Date of Last Change
END OF t_pre_prod_ord,
Internal table to hold Delinquent Orders (Report-2)
BEGIN OF t_delinquent_ord OCCURS 0,
sortl2 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e2 LIKE vbkd-ihrez_e, " Mill Order Number
salord2(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
saldata LIKE vbap-zzcust_req_avail,
schdate LIKE vbep-edatu, " Schedule Line Date
days_late LIKE zlgcyinfo-dayslate,
" Days Late
unit LIKE zlgcyinfo-unit, " Status of Consolidation Units
days_at_unit LIKE zlgcyinfo-daysatunit,
notes2 LIKE zcsimemo-text, " CSI File Memo Text
END OF t_delinquent_ord,
Internal table to hold Processed Material Orders (Report-3)
BEGIN OF t_processed_ord OCCURS 0,
sortl3 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e3 LIKE vbkd-ihrez_e, " Mill Order Number
salord3(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
order_tons LIKE vbap-kwmeng, " Cumulative Order Quantity
fin_tons LIKE mska-kalab, " Val.Stock With Unres Usage
fin_days TYPE i, " Finished Days
rel_tons LIKE likp-btgew, " Total Weight
rel_days TYPE i, " No.of.Days Order is Released
status(15) TYPE c, " Status Of Stock
tb_tons LIKE zlgcyinfo-tons, " Tons
notes3 LIKE zcsimemo-text, " CSI File Memo Text
END OF t_processed_ord,
Internal table to hold Flagged Orders (Report-4)
BEGIN OF t_flagged_ord OCCURS 0,
sortl4 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e4 LIKE vbkd-ihrez_e, " Mill Order Number
salord4(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
saldata LIKE vbap-zzcust_req_avail,
unit LIKE zlgcyinfo-unit, " Status of Consolidation Units
tons LIKE zlgcyinfo-tons, " Tons
priority LIKE vbap-lprio, " Delivery Priority
notes4 LIKE zcsimemo-text, " CSI File Memo Text
END OF t_flagged_ord,
Internal table to hold CSI memo file data
BEGIN OF t_csi_memo_data OCCURS 0,
vbeln LIKE zcsimemo-vbeln, " Sales Document Number
posnr LIKE zcsimemo-posnr, " Sales Order line item
text LIKE zcsimemo-text, " CSI File Memo Text
END OF t_csi_memo_data,
Internal table to hold Customer Codes
BEGIN OF t_customer_code OCCURS 0,
sortl LIKE zcustcode-sortl, " Sort Field
kunnr LIKE zcustcode-kunnr, " Customer Number
END OF t_customer_code,
Internal table to hold schedule line dates
BEGIN OF t_schedule_line_date OCCURS 0,
vbeln LIKE vbep-vbeln, " Sales Document Number
posnr LIKE vbep-posnr, " Sales Document Item Number
edatu LIKE vbep-edatu, " Schedule line date
END OF t_schedule_line_date,
Internal table to hold Characteristic values
t_configuration
TYPE TABLE OF conf_out
WITH HEADER LINE,
Internal tables to hold legacy data
t_lgcyinfo TYPE TABLE OF zlgcyinfo
WITH HEADER LINE.
Work variables declarations *
DATA:
gv_parvw LIKE kupav-parvw, " Partner function
gv_abgru LIKE vbap-abgru, " Reason to eject sales order
gv_gauge LIKE conf_out-atwtb, " Charac Value Description
gv_width LIKE conf_out-atwtb, " Charac Value Description
gv_ok_code LIKE sy-ucomm, " Usercommand
gv_okcode LIKE sy-ucomm, " User Command
gv_number LIKE sy-dynnr
VALUE '0101', " Initial Sub Screen Number
gv_vbeln LIKE vbak-vbeln, " Sales Order
gv_posnr LIKE vbup-posnr, " Sales Item
*/ Request No. DV2K904687
gv_del_prio LIKE vbap-lprio, " Delivery Priority
gv_obj_key LIKE inob-objek, " Object Key
gv_config LIKE inob-cuobj, " Configuration
gv_lab_result LIKE ausp-atwrt, " Lab Result Value
gv_pass_stock LIKE mska-kalab, " Finished Stock
gv_fail_stock LIKE mska-kalab, " Failed Stock
gv_tp_tons LIKE mska-kalab, " Test Pending Tons
gv_csi_stock LIKE mbew-lbkum, " CSI Stock On Hand
gv_val_stock LIKE mska-kalab, " Valuated Stock
gv_fin_tons LIKE mska-kalab, " Finished Tons
gv_fin_days TYPE i, " Finished Days
gv_rel_tons LIKE likp-btgew, " Released Tons
gv_rel_days TYPE i, " Released Days
gv_no_delivery " Number of Delivery Documents
TYPE i,
gv_bund_tons LIKE zlgcyinfo-tons, " Bundling Tons
gv_net_weight LIKE mara-ntgew, " Net Weight
gv_tb_tons LIKE zlgcyinfo-tons, " Test/Bundling Tons
gv_date LIKE mska-ersda, " Date
gv_tabix LIKE sy-tabix, " Table Index
gv_flg TYPE c, " Flag Variable
gv_exit TYPE c. " For Parameter Exit
Constant declarations for ALV Grid *
CONSTANTS:
c_cont_pre_prod_ord
TYPE scrfname VALUE 'CUST_PPP',
" Custom Container for Report-1
c_cont_delinquent_ord
TYPE scrfname VALUE 'CUST_DIP',
" Custom Container for Report-2
c_cont_processed_ord
TYPE scrfname VALUE 'CUST_PMS',
" Custom Container for Report-3
c_cont_flagged_ord
TYPE scrfname VALUE 'CUST_FLGORD',
" Custom Container for Report-4
c_handle1(3) TYPE c VALUE 'G_1', " Handle for PPP rpt Grid
c_handle2(3) TYPE c VALUE 'G_2', " Handle for DIP rpt Grid
c_handle3(3) TYPE c VALUE 'G_3', " Handle for PMS rpt Grid
c_handle4(3) TYPE c VALUE 'G_4', " Handle for FLGORD rpt Grid
c_true TYPE c VALUE 'X', " For value 'X'
c_save TYPE c VALUE 'A'. " User-Defd & Global Variants
Selection Screen *
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-014.
PARAMETERS :
p_osr RADIOBUTTON GROUP g1
DEFAULT 'X', " Outside Sales Representative
p_isr RADIOBUTTON GROUP g1, " Inside Sales Representative
p_s_mgr RADIOBUTTON GROUP g1. " Sales Manager
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-005.
SELECT-OPTIONS:
s_pernr FOR vbpa-pernr
OBLIGATORY, " Employee Number
s_kunnr FOR kna1-kunnr, " Customer Number
s_sortl FOR kna1-sortl, " Customer Search Term
s_kondm FOR vbap-kondm. " Material Pricing Group
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-006.
PARAMETERS:
p_open RADIOBUTTON GROUP g2
DEFAULT 'X', " Open Orders
p_closed RADIOBUTTON GROUP g2. " Closed Orders
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-007.
PARAMETERS:
p_var1 LIKE disvariant-variant, " Variant For Report-1
p_var2 LIKE disvariant-variant, " Variant For Report-2
p_var3 LIKE disvariant-variant, " Variant For Report-3
p_var4 LIKE disvariant-variant. " Varinat For Report-3
SELECTION-SCREEN END OF BLOCK b4.
SELECTION-SCREEN END OF SCREEN 500.
*/ Begin of Modification - Request No. DV2K904687
Selection Screen for Changing Sales Order Priority
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS WINDOW.
SELECTION-SCREEN BEGIN OF BLOCK b5 WITH FRAME TITLE text-044.
PARAMETERS p_sonum LIKE vbap-vbeln." Sales Order Number
SELECT-OPTIONS s_item FOR vbap-posnr." Sales Order Item
PARAMETERS p_delpr LIKE vbap-lprio." Delivery Priority
SELECTION-SCREEN END OF BLOCK b5.
SELECTION-SCREEN END OF SCREEN 1100.
*/ End of Modification - Request No. DV2K904687
CLASS lcl_gv_event_receiveriver DEFINITION *
CLASS lcl_event_receiver DEFINITION DEFERRED.
ALV Grid - Work Variables Declarations *
DATA:
gv_cont_pre_prod_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-1
gv_cont_delinquent_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-2
gv_cont_processed_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-3
gv_cont_flagged_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-4
gv_grid_pre_prod_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-1
gv_grid_delinquent_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-2
gv_grid_processed_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-3
gv_grid_flagged_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-4
gv_event_receiver TYPE REF
TO lcl_event_receiver,
" Object For Local Class
gs_lay_pre_prod_ord TYPE lvc_s_layo,
" Work Area for Grid layout
gs_lay_delinquent_ord TYPE lvc_s_layo,
" Work Area for Grid layout
gs_lay_processed_ord TYPE lvc_s_layo,
" Work Area for Grid layout
gs_lay_flagged_ord TYPE lvc_s_layo,
" Work Area for Grid Layout
gs_var_pre_prod_ord TYPE disvariant,
" Layout Structure
gs_var_delinquent_ord TYPE disvariant,
" Layout Structure
gs_var_processed_ord TYPE disvariant,
" Layout Structure
gs_var_flagged_ord TYPE disvariant,
" Layout Structure
t_fcat_pre_prod_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-1
t_fcat_delinquent_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-2
t_fcat_processed_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-3
t_fcat_flagged_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-4
t_exclude TYPE ui_functions,
" Function Code Table
gs_exclude TYPE ui_func. " Function Code Structure
CLASS lcl_gv_event_receiver DEFINITION *
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_hotspot
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id es_row_no,
handle_top_of_page
FOR EVENT print_top_of_page OF cl_gui_alv_grid,
*/ Begin of Modification - Request No. DV2K904687
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
*/ End of Modification - Request No. DV2K904687
ENDCLASS. " LCL_EVENT_RECEIVER DEFINITION
CLASS IMPLEMENTATION *
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_hotspot.
CASE e_column_id-fieldname.
WHEN 'SALORD1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_pre_prod_ord-salord1.
WHEN 'SALORD2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_delinquent_ord-salord2.
WHEN 'SALORD3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_processed_ord-salord3.
WHEN 'SALORD4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_flagged_ord-salord4.
WHEN 'SORTL1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_pre_prod_ord-sortl1.
WHEN 'SORTL2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_delinquent_ord-sortl2.
WHEN 'SORTL3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_processed_ord-sortl3.
WHEN 'SORTL4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_flagged_ord-sortl4.
WHEN 'IHREZ_E1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_pre_prod_ord-ihrez_e1.
WHEN 'IHREZ_E2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_delinquent_ord-ihrez_e2.
WHEN 'IHREZ_E3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_processed_ord-ihrez_e3.
WHEN 'IHREZ_E4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_flagged_ord-ihrez_e4.
WHEN 'NOTES1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call zsd00087 program to edit CSI Memo Text
PERFORM edit_notes USING t_pre_prod_ord-salord1.
WHEN 'NOTES2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call zsd00087 program to edit CSI Memo Text
PERFORM edit_notes USING t_delinquent_ord-salord2.
WHEN 'NOTES3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call zsd00087 program to CSI Memo Text
PERFORM edit_notes USING t_processed_ord-salord3.
WHEN 'NOTES4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call zsd00087 program to CSI Memo Text
PERFORM edit_notes USING t_flagged_ord-salord4.
ENDCASE. " CASE E_COLUMN_ID ...
ENDMETHOD. " HANDLE_HOTSPOT
METHOD handle_top_of_page.
PERFORM write_report_header.
ENDMETHOD. " METHOD HANDLE_TOP_OF_PAGE
*/ Begin of Modification - Request No. DV2K904687
METHOD handle_toolbar.
DATA: ls_toolbar TYPE stb_button.
append a separator to normal toolbar
CLEAR ls_toolbar.
MOVE 3 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
CLEAR ls_toolbar.
append a button for Change Delivery Priority
MOVE 'CHNG_PRIO' TO ls_toolbar-function.
MOVE 'Change SO Delivery Priority'(048)
TO ls_toolbar-quickinfo.
MOVE 'Change SO Priority'(049) TO ls_toolbar-text.
MOVE 0 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD. " handle_toolbar
METHOD handle_user_command.
DATA: t_sel_row TYPE lvc_t_roid,
gs_sel_row TYPE lvc_s_roid,
gs_flagged_ord LIKE t_flagged_ord,
lv_lines TYPE i.
CASE e_ucomm.
WHEN 'CHNG_PRIO'.
REFRESH t_sel_row.
CLEAR e_ucomm.
CALL METHOD gv_grid_flagged_ord->get_selected_rows
IMPORTING
et_row_no = t_sel_row.
CLEAR: t_flagged_ord,
gv_vbeln,
gv_posnr,
gv_del_prio.
DESCRIBE TABLE t_sel_row LINES lv_lines.
IF lv_lines GT 1.
MESSAGE i001 WITH 'Select only one row'(043).
ELSEIF lv_lines EQ 1.
READ TABLE t_sel_row INTO gs_sel_row INDEX 1.
READ TABLE t_flagged_ord INTO gs_flagged_ord
INDEX gs_sel_row-row_id.
IF sy-subrc EQ 0.
SPLIT gs_flagged_ord-salord4 AT '-' INTO gv_vbeln gv_posnr.
gv_del_prio = gs_flagged_ord-priority.
CLEAR: s_item, s_item[].
p_sonum = gv_vbeln.
p_delpr = gv_del_prio.
s_item-low = gv_posnr.
APPEND s_item TO s_item.
CLEAR s_item.
ENDIF. " IF sy-subrc EQ 0
ENDIF. " IF lv_lines GT 1
IF lv_lines LE 1.
CALL SELECTION-SCREEN '1100' STARTING AT 30 2
ENDING AT 110 7.
LEAVE TO SCREEN 100.
ENDIF.
ENDCASE. " CASE e_ucomm
ENDMETHOD. " handle_user_command
*/ End of Modification - Request No. DV2K904687
ENDCLASS. " LCL_EVENT_RECEIVER
" IMPLEMENTATION
Form WRITE_REPORT_HEADER *
This subroutine displays Report Header which includes *
Report Name, Executed by, Execution date, Execution Time *
There are no parameters to be passed to this subroutine *
FORM write_report_header.
DATA lv_rep_tit(72) TYPE c.
FORMAT COLOR COL_KEY.
MOVE sy-title TO lv_rep_tit.
CONDENSE lv_rep_tit.
SKIP 1.
WRITE: /3 sy-repid,
25 'California Steel Industries, Inc.'(040),
75 'Page'(041),
80(4) sy-pagno.
WRITE: /3 sy-uzeit,
25 lv_rep_tit,
75 sy-datum.
FORMAT RESET.
ENDFORM. " WRITE_REPORT_HEADER
At selection-output *
AT SELECTION-SCREEN OUTPUT.
CLEAR sy-ucomm.
IF sy-dynnr EQ '0500'.
Initialize layout variant for report-1
CLEAR gs_var_pre_prod_ord.
gs_var_pre_prod_ord-report = sy-cprog.
gs_var_pre_prod_ord-handle = c_handle1.
PERFORM initialize_layoutvariant CHANGING gs_var_pre_prod_ord.
p_var1 = gs_var_pre_prod_ord-variant.
Initialize layout variant for report-2
CLEAR gs_var_delinquent_ord.
gs_var_delinquent_ord-report = sy-cprog.
gs_var_delinquent_ord-handle = c_handle2.
PERFORM initialize_layoutvariant CHANGING gs_var_delinquent_ord.
p_var2 = gs_var_delinquent_ord-variant.
Initialize layout variant for report-3
CLEAR gs_var_processed_ord.
gs_var_processed_ord-report = sy-cprog.
gs_var_processed_ord-handle = c_handle3.
PERFORM initialize_layoutvariant CHANGING gs_var_processed_ord.
p_var3 = gs_var_processed_ord-variant.
Initialize layout variant for report-4
CLEAR gs_var_flagged_ord.
gs_var_flagged_ord-report = sy-cprog.
gs_var_flagged_ord-handle = c_handle4.
PERFORM initialize_layoutvariant CHANGING gs_var_flagged_ord.
p_var4 = gs_var_flagged_ord-variant.
*/ Begin of Modification - Request No. DV2K904687
ELSEIF sy-dynnr EQ '1100'.
DATA t_exclude TYPE TABLE OF sy-ucomm.
SET PF-STATUS 'MENU_1100'.
To use your own GUI status for a selection screen
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
EXPORTING
p_status = 'MENU_1100'
TABLES
p_exclude = t_exclude.
ENDIF. " IF sy-dynnr EQ '0500'
*/ End of Modification - Request No. DV2K904687
At Selection Screen *
AT SELECTION-SCREEN.
*/ Begin of Modification - Request No. DV2K904687
CASE sy-dynnr.
WHEN '1100'.
IF sy-ucomm IS INITIAL.
CLEAR sy-ucomm.
LEAVE TO SCREEN 1100.
ENDIF. " IF sy-ucomm IS INITIAL
CASE sy-ucomm.
WHEN 'SAVE'.
CLEAR sy-ucomm.
Change Delivery Priority using BAPI method
PERFORM change_del_priority.
CLEAR: sy-ucomm,
gv_vbeln,
gv_posnr,
gv_del_prio,
p_sonum,
s_item,
s_item[],
p_delpr.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
CLEAR: sy-ucomm,
gv_vbeln,
gv_posnr,
gv_del_prio,
p_sonum,
s_item,
s_item[],
p_delpr.
LEAVE TO SCREEN 0.
ENDCASE. " CASE sy-ucomm
WHEN '0500'.
IF sy-ucomm EQ 'CRET'.
LEAVE TO SCREEN 100.
ELSEIF sy-ucomm IS INITIAL.
LEAVE TO SCREEN 500.
ENDIF. " IF SY-UCOMM EQ 'CRET'
ENDCASE. " CASE sy-dynnr
*/ End of Modification - Request No. DV2K904687
Selection Screen: Validations *
AT SELECTION-SCREEN ON s_pernr.
Validate Employee Number
PERFORM validate_employee_number.
AT SELECTION-SCREEN ON s_kunnr.
Validate Customer Number
IF NOT s_kunnr IS INITIAL.
PERFORM validate_customer_number.
ENDIF. " IF NOT S_KUNNR IS INITIAL
AT SELECTION-SCREEN ON s_sortl.
Validate Search Term
IF NOT s_sortl IS INITIAL.
PERFORM validate_search_term.
ENDIF. " IF NOT S_SORTL IS INITIAL
AT SELECTION-SCREEN ON s_kondm.
Validate Product
IF NOT s_kondm IS INITIAL.
PERFORM validate_product.
ENDIF. " IF NOT S_KONDM IS INITIAL
Validate p_var1
AT SELECTION-SCREEN ON p_var1.
CLEAR gs_var_pre_prod_ord.
gs_var_pre_prod_ord-report = sy-cprog.
gs_var_pre_prod_ord-handle = c_handle1.
gs_var_pre_prod_ord-variant = p_var1.
IF p_var1 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_pre_prod_ord.
ENDIF. " IF P_VAR1 IS NOT INITIAL
Validate p_var2
AT SELECTION-SCREEN ON p_var2.
CLEAR gs_var_delinquent_ord.
gs_var_delinquent_ord-report = sy-cprog.
gs_var_delinquent_ord-handle = c_handle2.
gs_var_delinquent_ord-variant = p_var2.
IF p_var2 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_delinquent_ord.
ENDIF. " IF P_VAR2 IS NOT INITIAL
Validate p_var3
AT SELECTION-SCREEN ON p_var3.
CLEAR gs_var_processed_ord.
gs_var_processed_ord-report = sy-cprog.
gs_var_processed_ord-handle = c_handle3.
gs_var_processed_ord-variant = p_var3.
IF p_var3 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_processed_ord.
ENDIF. " IF P_VAR3 IS NOT INITIAL
Validate p_var4
AT SELECTION-SCREEN ON p_var4.
CLEAR gs_var_flagged_ord.
gs_var_flagged_ord-report = sy-cprog.
gs_var_flagged_ord-handle = c_handle4.
gs_var_flagged_ord-variant = p_var4.
IF p_var4 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_flagged_ord.
ENDIF. " IF P_VAR4 IS NOT INITIAL
Selection Screen: Value Request for ALV GRID Variants *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var1.
CLEAR gs_var_pre_prod_ord.
gs_var_pre_prod_ord-report = sy-cprog.
gs_var_pre_prod_ord-handle = c_handle1.
PERFORM f4_variant CHANGING gs_var_pre_prod_ord
gv_exit.
IF gv_exit NE c_true.
p_var1 = gs_var_pre_prod_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
F4 help for variant p_var2
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var2.
CLEAR:
gs_var_delinquent_ord,
gv_exit.
gs_var_delinquent_ord-report = sy-cprog.
gs_var_delinquent_ord-handle = c_handle2.
PERFORM f4_variant CHANGING gs_var_delinquent_ord
gv_exit.
IF gv_exit NE c_true.
p_var2 = gs_var_delinquent_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
F4 help for variant p_var3
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var3.
CLEAR:
gs_var_processed_ord,
gv_exit.
gs_var_processed_ord-report = sy-cprog.
gs_var_processed_ord-handle = c_handle3.
PERFORM f4_variant CHANGING gs_var_processed_ord
gv_exit.
IF gv_exit NE c_true.
p_var3 = gs_var_processed_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
F4 help for variant p_var4
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var4.
CLEAR:
gs_var_flagged_ord,
gv_exit.
gs_var_flagged_ord-report = sy-cprog.
gs_var_flagged_ord-handle = c_handle4.
PERFORM f4_variant CHANGING gs_var_flagged_ord
gv_exit.
IF gv_exit NE c_true.
p_var4 = gs_var_flagged_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
Form validate_employee_number *
This subroutine validates Employee Number *
There are no parameters to need be passed to this subroutine *
FORM validate_employee_number.
DATA lv_pernr LIKE vbpa-pernr.
SELECT SINGLE pernr
INTO lv_pernr
FROM vbpa
WHERE pernr IN s_pernr.
IF sy-subrc NE 0.
MESSAGE e001 WITH text-010.
ENDIF. " IF SY-SUBRC NE 0
CLEAR lv_pernr.
ENDFORM. " VALIDATE_EMPLOYEE_NUMBER
Form validate_customer_number *
This subroutine validates Customer Number *
There are no parameters need to be passed to this subroutine *
FORM validate_customer_number.
SELECT SINGLE kunnr
INTO t_common_data-kunnr
FROM kna1
WHERE kunnr IN s_kunnr.
IF sy-subrc NE 0.
MESSAGE e001 WITH text-011.
ENDIF. " IF SY-SUBRC NE 0
CLEAR t_common_data-kunnr.
ENDFORM. " VALIDATE_CUSTOMER_NUMBER
Form validate_search_term *
This subroutine validates Search Term *
There are no parameters need to be passed to this subroutine *
FORM validate_search_term.
SELECT SINGLE sortl
INTO t_customer_code-sortl
FROM kna1
WHERE sortl IN s_sortl.
IF sy-subrc NE 0.
MESSAGE e001 WITH text-012.
ENDIF. " IF SY-SUBRC NE 0
CLEAR t_customer_code-sortl.
ENDFORM. " VALIDATE_SEARCH_TERM
Form validate_product *
This subroutine validates Product *
There are no parameters need to be passed to this subroutine *
FORM validate_product.
SELECT SINGLE kondm
INTO t_ -
Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics. -
SAP VIM Integrated Invoice Cockpit - single default layout variant for all exceptions
Dear all,
I hope some one has found the solution for this problem we are experiencing in SAP Vendor Invoice Management 600:
For the Integrated Invoice Cockpit ( transaction /OPT/VIM_IIC ) we want to be able to define ONE global layout variant ( available for all users) that is available for all exceptions in the ICC. This so we only have to define and maintain one layout variant centrally.
However this seems not possible: we tried to do so with the transaction /OPT/VIM_EIIC_ADM but it appears that it is only possible to define global layout variants for each exception in the ICC separately ( which is a lot of maintenance work)
Is there a solution available for this ?
Many thanks in advance for your help.
Kind Regards,
ArjanDear all,
I hope some one has found the solution for this problem we are experiencing in SAP Vendor Invoice Management 600:
For the Integrated Invoice Cockpit ( transaction /OPT/VIM_IIC ) we want to be able to define ONE global layout variant ( available for all users) that is available for all exceptions in the ICC. This so we only have to define and maintain one layout variant centrally.
However this seems not possible: we tried to do so with the transaction /OPT/VIM_EIIC_ADM but it appears that it is only possible to define global layout variants for each exception in the ICC separately ( which is a lot of maintenance work)
Is there a solution available for this ?
Many thanks in advance for your help.
Kind Regards,
Arjan -
How to map same sales unit for two keyfigures
hi,
i am using two key figure with reference of one sales unit(0SALESUNIT) but in update rules i am getting only one key figure the other key figure is not showing in update rules.
i want to use the same sales unit for two different key figure.
How to do it.
AnkitHi Ankit,
if you have 2 key figures that are not defined as a reference of another key figure, but just use 0SALES_UNIT as their unit, you should have no problems with the update rules. The system will show both key figures in the update rule (or transformation).
Also then the logic you map for 0SALES_UNIT will apply to both key figures in a transformation. For an update rule the same applies, unless you map the 2 key figures differently on purpose.
I am not sure if your question was saying that you have defined a key figure as a reference to another key figure. If you have that situation, you should still be fine. If not try the approach above, after all there is not much benefit in creating a reference key figure in contract to creating a reference Characteristic (sharing master data, etc.)
Best,
Ralf -
Problems with the Layout Priority in KM
Hello, I have some problems with the Layout Priority in KM..
I'm using a KM Navigation Iview with "<i>Layout Set</i>"=NewsBrowser (this Layout Set uses a Collection renderer that sorts the folder's contents by "last modified") and "<i>Layout Set Mode</i>"=exclusive.
In the KM folder I setted in <i>Details->Settings->Presentation</i> as "<u>rndSortProperty</u>"=name because I need to order my files by FileName property.
Despite that in see that the contents showed in my iview are ordered by Last Modified...
The "<i>Layout Set Mode</i>" exclusive gives the higher priority to the Folder Settings..
I don't understand..
Thank you in advance.Thank you Shyja,
your post was helpful, but another issue is occurred.
Maybe en example could be useful..
My scenario:
- I need to show a km folder with layout set "<i>ConsumerExplorer</i>" on root folder (no "property of sorting" setted on its collection renderer) and "<i>TabExplorer</i>" (no "property of sorting" setted on its collection renderer).
- I need to sort files and folders by "last modified". By default seems that they are sorted by "name".
- With my administrator user I open my folder details (in Content Admin->KM Content is used the Layout "<i>AdminExplorer</i>"), and in "Settings->Presentation->Additional Parameters" I add two parameters "<i>rndSortOrder</i>=descending" and "<i>rndSortProperty</i>=modified" (the others are parameters of AdminExplorer Layout).
- Then I check "Apply Settings to All Subfolders" and "Use Settings for All iViews (Preferred Presentation)".
result:
I see the "<i>ConsumerExplorer</i>" on root folder, the subfolder are sorted by "last modified" (everything ok).
I click on a subfolder, the "TabExplorer" si showed, the Tabs and the content are sorted by "last modified" BUT..
.. into the tabs are showed <u>nameFolders</u> (in link style), <u>the action command</u>, and the properties of "<u>author</u>" and "<u>last modified</u>" (normally into the tabs are showed just the folderNames in text style)...
Why?? Is possible that the "AdminExplorer" parameters of the km folder affect the Tab component??
Thank you -
Same number range for two different series groups?
Dear all,
There are two scenarios
1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case) as per excise legal requirement
Ie running number is for series group 20 is 300016
For the above deemed exp case (second scenario)it should pickup 300017
And again when they do under bond case(first scenario), it should pick up 300018 like that
Is it possible to maintain the same number range for two different series groups(20 and 30)?
Even if you maintain the same number range for 30, as per running number range of 20
Will the system update simultaneously the same number range for 20 and 30 series groups?
Please suggest the way.With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
Regards,
Aroop -
HT4759 can you use the same apple id for two phones on the cloud?
can you use the same apple id for two phones on the same verizon account and if so can you keep there contacts etc. separate?
If you want to keep your contacts and other data you sync with iCloud separate, you'll have to create separate iCloud accounts, which will require different IDs. If you share the same iCloud account/ID on multiple devices, the synced data will be merged and will appear on all devices syncing with the shared account.
You can still share the same ID for iTunes; it doesn't have to be the same as the one used for iCloud. -
HELP!
I couldn't download any app into my iPAD. Puzzled by this strange condition, I tried downloading the same chosen app into my iPhone. It worked!
I use the same Apple ID for both my iPAD and iPhone. So why is it not working for my iPad? Previously, both devices were working fine!
I hope that somebody can help me solve this problem.Do the apps show as installed on the Purchased tab in the App Store app ? If they show as installed, then have you got any restrictions set on Settings > General > Restrictions (e.g. Allowed Content > Apps) that might be hiding them ?
You could try closing the App Store app completely and then seeing if it downloads after you re-open it : from the home screen (i.e.not with the App Store app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the App Store app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
You could also try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
And try logging out, and then back in, with your iTunes account : Settings > Store -
I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not happy?
By "game center account", do you mean Apple ID?
If so, you can change it.
1. Tap settings and navigate to iTunes and App Stores
2. Tap "Apple ID" and then tap "Sign Out"
3. Log in with a different ID.
Maybe you are looking for
-
How to pull PO line item with "Block" indicator
Hi all In ME2N, how do I pull all the PO line items with the "block" indicator set? I couldn't find a field in dynamic selection. Thanks in advance!
-
Center Chanel Not Working: SB ZS 2 Gamer & Klipsch ProMedia
Not sure which section is appropriate for this answer but it could fall under speakers or the soundcard I've read a few things on here about getting my center channel to work, but no luck. I have Audigy ZS gamer and for speakers I have Klipsch ProMed
-
hi all, i have a problem with my N79, wen i turn on it ok 2or 4 min later it will be bloked, i don't know what can i do to fix it up,
-
Hi all, Is it possible to create more than po's for one Purchase requisition?If so,will it allow us to post GR against both PO's? Waiting for your reply regards, Mona
-
Severe driver-crashes with N580GTX Lightning! [v3xx series]
Hello everyone! i just registered here after a while of scouring the forum a bit. i'll try to present info about the issue in accordance with the posting guidelines as far as possible, as well as try to be concise in it. my system-specs can be seen i