Problem with sap 4.7ee with 640kirnal

Hi All,
              I installed sap 4.7ee kernal level is 640.
              I am not able to work BRTOOLS. If I am using BRTOOLS it giving error.
              wht to use here
Regards,
Sateesh J

Hi,
Did you also update the dba kernel tools (brtools) to the same patch level?
Did you set the right properly? (executing saproot.sh)
What is your error exactly?
Regards,
Antoine

Similar Messages

  • Problem with printing through SAP

    Hi All,
    We have problem with printing, only one person through SAP can only print the documents successfully and the remaining are getting incomplete print output. This is happening only for transactions GD23 and FB03 (FI related transactions). We have tried with removing Saplpd folder and installing Sprint as suggested by SAP from note 894444. Still problem persists. Please suggest me in this regards.
    Veerendra Kumar.

    Hi Ardhian,
    We are using Front end printing and already installed SAP GUI new version i.e. 7.10.
    Only one user is able to print the document correctly from SAP, and other are getting incorrect print and getting error message "System cannot print the last 80 columns of the report" on one system.
    SAP version we are using is 4.7EE.
    Let me know if any more information needed for analysing the issue.
    VeerendraKumar.
    Edited by: Veerendra Kumar Mutyala on Feb 20, 2009 5:35 AM
    Edited by: Veerendra Kumar Mutyala on Feb 20, 2009 5:37 AM

  • Problem with Send and Receive Emal In SAP System

    Hi gurus!
    I have a following quote:
    Dear !
    I have a problem with send and receive email in SAP system following :
    I want to test send and receive email in local network at my company. I
    had two server
    Server 1 : I setup Exchange Mail Server 2007 with domain controller is
    fes.com
    Server 2 : I setup SAP ERP ECC 6.0
    On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
    and then
    On Server 2: I had configured send and receive email on SAP system
    through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
    e-mail, fax, paging or SMS using SMTP"
    for example :
    I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
    and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
    Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
    For example:
    Login system SAP with Basis01 account (with  u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
    and then
    Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
    To receive email from Basis01 (with u1Afes.com )
    Please help me now
    Thanks
    I replace "@" with "A" because of banning email of this forum.
    This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
    By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
    Regards
    An NLP
    Edited by: An NLP on Apr 6, 2010 7:03 PM

    Hi,
    This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
    So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
    (Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
    (A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
    (A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
    I would definitely NOT recommend this method but the decision is up to you.
    P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
    Hope this helps
    Michael

  • Performance problems with SAP GUI 7.10 and BEx 3.5 Patch 400?

    Hi everybody,
    we installed SAP GUI 7.10 and BEx 3.5 Patch 400 and detected hugh performance problems with this version in comparison to the SAP GUI 6.40 and BEx 3.5 or BEx 7.0 Patch 800.
    Does anybody detect the same problems?
    Best regards,
    Ulli

    Most important question when you are talking about performance-issues:
    which OC are you working on and which excel version?
    ciao
    Joke

  • There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

    Hello,
    I have an issue with connecting client SB1H on Windows, the scenario is as follows:
    1.- Server:
         Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
         NDB and Server are review 69 SP06
    2.- Client:
         Windows 8 Pro Virtual Machine on Microsoft Hyper-V
         SB1H PL 11 version 32bits    
         SAP HANA Studio version 1.0.60
    When I run SB1H the following message appears:
    There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
    Any idea what could be the solution?

    Hi,
    Please check SAP notes:
       1993392 - Server components setup wizard: New default values for certificates and single sign-on option
    1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
    Thanks & Regards,
    Nagarajan

  • Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?

    hello,
    I went to the PAM in the SAP Marketplace to see if SAP GRC AC 5.3 could connect to SAP R/3 4.7 Enterprise but I can't see all the "Add-On Product Version for...", it's cut off.
    Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
    If I can't is there any proof about it? I have to show it to a client.
    Best Regards,
    Pablo Mortera,

    Pablo,
    GRC AC 5.3 works perfectly fine with SAP's R/3 4.6c, mySAP ERP 4.7 and ECC systems. In fact we have two 4.7 Enterprise systems connected to GRC AC 5.3 system.
    You can get the details of supported SAP ERP systems under prerequisite section of Info page of GRC AC 5.3 , it can be accessed on marketplace at -
    Downloads-->Installations and Upgrades - Entry by Application Group > SAP Solutions for Governance, Risk, and Compliance>SAP GRC Access Control>SAP GRC ACCESS CONTROL>SAP GRC ACCESS CONTROL 5.3
    Just ensure to have proper BASIS and ABAP support pack level as mentioned in prerequisites.
    Regards,
    Amol

  • Problem with all ready installed SAP R/3 4.7

    Hi expert,
    well i need ur help.
    i have installed SAP R/3 4.7 in my laptop for learning purpose it was working perfectly but few days ago there was some problem with my booting files. i have installed Windows server on C drive sap data on D drive and Windows XP on F drive. now due to booting problem by mistake my EDP guy has installed xp on C drive without effecting to partition and he found all sap data safe.
    now what is the solution to again start SAP?? like do i need to again install SAP after formatting the laptop?? or i can start it by only reinstalling the Windows server?? kindly help me out i am in big trouble..
    looking for your help.
    Irfan.
    09228466129
    Edited by: Irfan Shersia on Mar 31, 2008 2:59 PM

    hi guys,
    well i m wondering but i have got solution form one system administrator...!! he has simply copy some file from his PC and past in laptop with the help of one software, hardly it takes two minutes and my Windows server & SAP application works perfectly....!!!!!
    still thanks to help.
    Irfan.

  • Problem with create universe on Business Objects XI 3.1 base on SAP Query

    Hello,
    I have a problem with create universe on Business Objects XI 3.1 base on SAP Query.
    The problem is hierarchy. Massage on Busines Objects is :
       OWBS_ELEMT__ISTKOSZT(cube ICPC01/BEX_ICOC01):Exception condition  "HIERARCHY NOT FOUND" raised.(WIS 10901) 
    Query in BEX run OK.
    Best regards.
    Ela.

    Hello,
    Thanks for response.
    When I run BEX QUERY, all works OK.
    All hierarchies was created and activated  on system BW.
    This situation appears after upgrade BW to SAP NetWeaver 7.3.
    Before upgrade I created universe without any problems.
    Regards Ela

  • Problems with posting iDocs from MDM in SAP R3

    Hi,
    I am an MDM consultant, with limited knowledge about SAP R3.
    We send material master data from MDM, via PI to R3 using iDocs.
    We are having problems with posting MATMAS, and it seems the problems are with updating already existing materials.
    In BD87 we get the following warnings:
    The field MARA-ERVOE is not ready for input and was therefore not initialized
    The field MARA-ERVOL is not ready for input and was therefore not initialized
    The field MARA-FERTH is not ready for input and was therefore not initialized
    The field MARA-KZGVH is not ready for input and was therefore not initialized
    The field MARA-XCHPF is not ready for input and was therefore not initialized
    With the last message being:
    No changes made
    I have checked the MDM syndicator, and none of these idoc-fields are linked to the MDM repository.
    So they are syndicated blank.
    If we try to resend the material, it is again stopped and in BD87 I see the same messages.
    Please help me understanding how to solve these issues.
    Thanks,
    Thomas

    Hi,
    Please refer the below threads which talks about the similar problem
    http://scn.sap.com/thread/3180116
    http://scn.sap.com/thread/1374222
    Generally the basic view of the material to be created first. Then the sales, purchasing and other views to be created.
    There are few fields in the other views which gets values from the basic data view.
    Regards,
    Antony

  • Problem with printing graphics in SAP Script

    Hi,
    I am facing problem with printing of graphics in SAP Script. I uploaded a bitmap file from pc to se78. Then I inserted it in SAP script.
    I am able to view it in the printpreview as well as in the spool number. But it is not getting printed.
    Plese tell me the solution.
    Thanks,
    Srinivas

    You need to check your printer settings.Might be drivers are missing.

  • Problem with printing out of sap to printerserver 2008 connected printer

    Hi there,
    one of our customers is using a SAP ECC 6 System on a Windwos 2003 Server and is printing over a windows 2008 Printerserver to the printers.
    We now have the issue, that there is a problem with lpd. The printer is reach- and pingable from SAP system, also on os-level the printer-server is reachable via telnet on port 515. But within printing, we get the following eror
    Status: Incorrect (Failed to connect to LPD)
    Job status: Completed
    Area: Data transfer
    Error: LPD response format invalid
    Any idea?
    thx for help
    Otto

    Hello Otto,
    It seems the problem is in the connection the LPD on the destination host.
    I would check the connection. Please, see note 10758 that can be helpful for this case.
    Regards,
    Blanca

  • Problem with SAP GUI for HTML

    Hi SDN
    I am creating a SAP transaction iView with SAP GUI for HTML. I have give the Transaction code VA01 but when i execute the the iView it is displaying the  SAP Easy Access screen in html. Can any one suggest me how to rectify this error and display the required transaction in html.
    Thanks in advance.
    Regards
    Basha

    Hi Basha,
    Try this in the browser:
    http://<host>:<port>/sap/bc/gui/sap/its/va01?sap-client=100(XXX)
    1) It will ask for the username and password
    2) Enter the credentials and it should directly take you to the VA01 transaction
    If it fails again, try this:
    http://<host>:<port>/sap/bc/gui/sap/its/vl31w?sap-client=100(XXX)
    This should display the "Create Inbound Delivery NotificationTitle Create Inbound Delivery Notification " sreen."
    If it faisl again, there is some problem with the way the ITS has set up. Check with your basis.
    Thanks,
    Sathya

  • Problem with sap script table in main window

    hi all,
    i have created a sap script  for which output is in 7 pages.
    except first page all the remaining pages are giving the correct output.
    the problem with the first page is iam not not getting vertical lines in the table which is in the main window of page 1.
    iam getting the vertical lines correctly in the mainwindow table of all the remaining pages.

    Hi,
    It's simple,
    Pre- U should had declared a second page for the same window with header, main & footer.
    now
    First when u r looping the internal table provide no of rows eg Row 1 TO 10. in the Loop ( Data Tab)
    or
    when defing TEXT Go to PC Editor and mention all the fields Under  PROTECT -  ENDPROTECT.
    This would solve the issue.
    Thanks
    Ravi

  • Problem with SAP logon 720 for printng with Citrix.

    Hi,
    I have a problem with sap logon 720 when printing for Citrix, one time print and other time don't print....
    I try to start SAPLPD for prompt comand... it's start but don't print....
    i'm write here for look if other people have this problem... I dont know what I can do.....
    Thank you very much....

    Hi Itmar,
    I was having the similar issue on my Windows Server 2003 Terminal Server. At times SAP prints stop working. Then i changed Printer Type to "G" and it had solved the problem. It skips the use of SAPLPD service and calling windows printing service directly.
    Just try with that.
    Regards,
    Gaurav

  • Problem with SAP Screen

    Not sure if this is the correct forum.
    Okies, a user of mine has a problem with her SAP screens. It seems that she can't view the full screen of CJ20N She has to drag the window bigger to be able to see the content. She uses this window in a split monitor view, i.e. some of the applications are displaying on the laptop window while other applications display on the monitor.
    Details of her SAPGUI:
    Release 640 Final
    File version: 6404.4.16.1015
    Build: 774474
    Patch Level : 16
    Do note that her primary monitor (notebook) is always set to 1280x800 and the secondary monitor is set to 1024x768. Anyone encounter this problem before?

    Hi,
    This is problem with windows screen resolution. Better to use, maximum supported window size and make sure to use same size for both the screens.
    Regards,
    Ganesh

Maybe you are looking for