Problem with SAP B1 mobile for Android connection
Hello guys,
I used to have SAP B1 application in my Android celphone and after I installed SAP B1if it just stopped working, after I connect, the system gets into an infinite loading status.
What can be happening?
Thank you very much in advance.
Hi Thibault,
What installer are you using? The simple one or the complex using Setup and Deployment project from .NET?
Is is strange the * in your directory name.
What namespace did you pointed to during the installation of B1DE?
I can see in my directory "C:\Documents and Settings\MyUserID\Local Settings\Temp\$$B1ADDONINSTALL$$" a directory called "SAP_$$SAP_App1$$" where "SAP" is my namespace and "App1" the name of my addon. Inside this directory the exe of my .NET setup project is copied. I think this is something relating to .NET Setup and Deployment projects.
The only problem I can see is your namespace = "*"...
Can it be?
Hope it helps
Trinidad.
Similar Messages
-
Problem with SAP logon 720 for printng with Citrix.
Hi,
I have a problem with sap logon 720 when printing for Citrix, one time print and other time don't print....
I try to start SAPLPD for prompt comand... it's start but don't print....
i'm write here for look if other people have this problem... I dont know what I can do.....
Thank you very much....Hi Itmar,
I was having the similar issue on my Windows Server 2003 Terminal Server. At times SAP prints stop working. Then i changed Printer Type to "G" and it had solved the problem. It skips the use of SAPLPD service and calling windows printing service directly.
Just try with that.
Regards,
Gaurav -
Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
hello,
I went to the PAM in the SAP Marketplace to see if SAP GRC AC 5.3 could connect to SAP R/3 4.7 Enterprise but I can't see all the "Add-On Product Version for...", it's cut off.
Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
If I can't is there any proof about it? I have to show it to a client.
Best Regards,
Pablo Mortera,Pablo,
GRC AC 5.3 works perfectly fine with SAP's R/3 4.6c, mySAP ERP 4.7 and ECC systems. In fact we have two 4.7 Enterprise systems connected to GRC AC 5.3 system.
You can get the details of supported SAP ERP systems under prerequisite section of Info page of GRC AC 5.3 , it can be accessed on marketplace at -
Downloads-->Installations and Upgrades - Entry by Application Group > SAP Solutions for Governance, Risk, and Compliance>SAP GRC Access Control>SAP GRC ACCESS CONTROL>SAP GRC ACCESS CONTROL 5.3
Just ensure to have proper BASIS and ABAP support pack level as mentioned in prerequisites.
Regards,
Amol -
Problem with Progress DB while using to connect using JDBC Adapter
Hi,
I am facing Problem with Progress DB while using to connect using JDBC Adapter. I am getting the following error in auditlog file like,
Error during database connection to the database URL jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db using the JDBC driver "com.progress.sql.jdbc.JdbcProgressDriver" : com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL " jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db "
I tried using the following all URLs,
1. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.
2. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.db
3.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.
4.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db.
Can anyone please help me out in solving this issue.
May be the cause for this is :
1) The Wrong URL format
2) CLASSPATH is not setted properly..
Can you look more into this stuff.
Thanks,
Soorya.Hi,
To access any database fromm XI, using the JDBC adapter, the corresponding drivers have to be installed on the XI server.
Just check this note 831162.
Also, check this PDF to install Drivers in XI,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10 -
Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"
Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be. -
I have a problem with my apple mobile device support file
Hey guys!
i'm really having a problem with my apple mobile device..
whenever i connect my cable to my computer WITHOUT the apple mobile device support file/program..my ITOUCH can sync and it WORKS!
but ITUNES doesnt sync in with my itouch because ITUNES doesn't work without the apple mobile device support program.. SO...
i reinstalled my ITUNES
i reinstalled my mobile device support file/program
i even changing it to AUTO (what they said about control panal, program, service, thingy)
I RESTARTED everything.. i think i did almost everything there is in apple support!
with NO LUCK! was it able to connect my computer.. UNLESS i take the apple mobile device support program OUT! @.@
i really need your help guys D:
P.S i dont have a Virus! i have a really good computer that is stable, so i'm certain i dont have a virus doing this.. but do you happened to know why it's causing this? Also how can i fix it?
BTW.. IT IS A CODE 52 i don't know what that means..
PLEASE AND THANKS YOU GUYS~ <3All I can suggeset is:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Have you looked at the AMDS topic of:
iOS: Device not recognized in iTunes for Windows
Do you have han image capture programs linstalled like for a camers or scanner? -
I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be...
I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!
Assuming you entered the correct WiFi password for your network, see these articles:
iOS: Troubleshooting Wi-Fi networks and connections
iOS and OS X: Recommended settings for Wi-Fi routers and access points -
I have a problem with my PC mobile device that the keyboard stop working and the mouse also
I have a problem with my PC mobile device that the keyboard stop working and the mouse also
All I can suggeset is:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Have you looked at the AMDS topic of:
iOS: Device not recognized in iTunes for Windows
Do you have han image capture programs linstalled like for a camers or scanner? -
Hi, I'm new in the community and I'm also new with SAP, so sorry for any errors.
For my work I need to open SAP by excel (VBA); and I have found the code below but it don't work.
Sub Work()
Set app = CreateObject("Sapgui.ScriptingCtrl.1")
Set Connection = app.openconnection("my system", True)
Set session = Connection.Children(0)
session.findById("wnd[0]/usr/txtRSYST-MANDT").Text = "Client"
session.findById("wnd[0]/usr/txtRSYST-BNAME").Text = "User"
session.findById("wnd[0]/usr/pwdRSYST-BCODE").Text = "Password"
session.findById("wnd[0]/usr/txtRSYST-LANGU").Text = "Language"
Session.findById("wnd[0]").sendVKey 0
End Sub
When the macro runs there is this error
Can you help me?
Thank you,
ax_salernoHi Alessandro - I am sharing an Excel sub that works for me by opening up logon pad, signing on to production, gettting credentials, then going into SAP and doing a transaction, and finally asking the user to click ok to terminate the session. I think this is something that there were questions on how to do the session close nicely but not sure if there is a solution yet.
Hope this helps.
Regards
Umur
Sub Logon()
'starts by executing logon pad, selecting prod, then enters
id/pwd
'works to sign on to sap and then kill the connection.
refers to saplogon.exe in Program Files/SAP71/FrontEnd/SAPGui folder
Dim SAPguiAPP As Object
Dim oConnection As Object
Dim Session As Object
Dim SAPCon As Object, SAPSesi As Object
Dim SapGuiAuto As Object, SAPApp As Object
If SAPguiAPP Is Nothing Then
Set SAPguiAPP =
CreateObject("Sapgui.ScriptingCtrl.1")
End If
If oConnection Is Nothing Then
Set oConnection =
SAPguiAPP.OpenConnection("1. Prod", True)
End If
If SAPSesi Is Nothing Then
Set SAPSesi =
oConnection.Children(0)
End If
Application.DisplayAlerts = False
With SAPSesi
.FindById("wnd[0]/usr/txtRSYST-MANDT").Text
= "010"
.FindById("wnd[0]/usr/txtRSYST-BNAME").Text = "USER"
.FindById("wnd[0]/usr/pwdRSYST-BCODE").Text =
"PASSW"
'.FindById("wnd[0]/usr/txtRSYST-LANGU").Text = "EN"
.FindById("wnd[0]").SendVKey 0
'start extraction
.FindById("wnd[0]").Maximize
.FindById("wnd[0]/tbar[0]/okcd").Text = "/Niw33"
.FindById("wnd[0]").SendVKey 0
.FindById("wnd[0]").Maximize
.FindById("wnd[0]/usr/ctxtCAUFVD-AUFNR").Text =
"8762449"
.FindById("wnd[0]/usr/ctxtCAUFVD-AUFNR").CaretPosition
= 7
.FindById("wnd[0]/tbar[1]/btn[8]").Press
.FindById("wnd[0]/usr/subSUB_ALL:SAPLCOIH:3001/ssubSUB_LEVEL:SAPLCOIH:1107/tabsTS_1100/tabpKOAU/ssubSUB_AUFTRAG:SAPLICO1:1100/tabsTABSTRIP/tabpTS05/ssubVALUES:SAPLICO1:1105/cntlPMCO_SUM_TREE/shellcont/shell/shellcont[1]/shell").HierarchyHeaderWidth
= 162
.FindById("wnd[0]/usr/subSUB_ALL:SAPLCOIH:3001/ssubSUB_LEVEL:SAPLCOIH:1107/tabsTS_1100/tabpKOAU/ssubSUB_AUFTRAG:SAPLICO1:1100/btnPUSH1").Press
.FindById("wnd[0]/usr/cntlGRID1/shellcont/shell/shellcont[1]/shell").SelectedRows
= "0"
.FindById("wnd[0]/usr/cntlGRID1/shellcont/shell/shellcont[1]/shell").DoubleClickCurrentCell
.FindById("wnd[0]/tbar[0]/btn[3]").Press
.FindById("wnd[1]/usr/btnSPOP-OPTION1").Press
.FindById("wnd[0]/tbar[0]/btn[3]").Press
.FindById("wnd[0]/tbar[0]/btn[3]").Press
.FindById("wnd[0]/tbar[0]/btn[3]").Press
'etc
End With
MsgBox
"After clicking OK, this SAP session is terminated."
Application.DisplayAlerts = True
Set Session =
Nothing
Set Connection =
Nothing
Set SAPguiAPP =
Nothing
End Sub -
Problem with SAP PI7.0 J2ee Engine starting
Hi,
Problem with SAP PI7.0 Server
I am using AIX6.1 and p570
J2ee engine is not starting but I am able to login to ABAP engine.
When I am trying to long in through internet explorer it is not working.
How to check J2ee engine started or not.
If it is not started then how to start J2ee engine.
If J2ee engine problem is there then how to solve the issue and where to check to solve the issue.Hi,
How to check J2ee engine started or not.
Check the url http://ipaddress:5xx00/index.html
If this url shows you the system info page then you j2ee engine is up.
If it is not started then how to start J2ee engine.
Check your server0.log file.
If J2ee engine problem is there then how to solve the issue and where to check to solve the issue.
Check for the problems in log file and do search in sdn or in the market place you will get plenty of info read them and try to resolve the errors.
Regards,
Vamshi. -
Problemas with file "ns_emails.xml" for SMTP EXCHANGE
Hi,
I have problems with my ns_emails configuration for a SMTP EXCHANGE Mail Server.
I configured Outlook with this parameters and works: Autenthication: yes, SSL: yes, port: 25, host: gmail.smtp.com.
In my BPEL process is a right msg, but the email doesn`t arrive:
<2008-01-27 19:19:51,781> <INFO> <default.collaxa.cube.services> <Utils::initNotificationMode> Notification via voice, fax, SMS, IM or pager will be sent. Emails will be sent with the current settings. If you would like to enable them, please configure accounts in ns_iaswconfig.xml and then set the NotificationMode attribute in ns_emails.xml to either NONE, EMAIL or ALL.
Please, ¿do you see something wrong with this file?
<EmailAccounts xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"
EmailMimeCharset=""
NotificationMode="EMAIL">
<EmailAccount>
<Name>Default</Name>
<GeneralSettings>
<FromName>Laura</FromName>
<FromAddress>[email protected]</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>smtp.gmail.com</SMTPHost>
<SMTPPort>25</SMTPPort>
<AuthenticationRequired>true</AuthenticationRequired>
<UseSSL>true</User>
<UserName>[email protected]</UserName>
<Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">mypass</Password>
</OutgoingServerSettings>
</EmailAccount>
</EmailAccounts>
Thanks,
LauraHi,
I know about domain.log file. In my first post, I put the message that I get.
The problema is with the SMTP Exchange MS Server.
I tried with a Local Mail Server with this parametes and its right.
<GeneralSettings>
<FromName>Laura Garcia</FromName>
<FromAddress>testuser@lgrico-port</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>lgrico-port</SMTPHost>
<SMTPPort>25</SMTPPort>
<UserName>testuser@lgrico-port</UserName>
<Password>laura</Password>
</OutgoingServerSettings>
But with this configuration its wrong:
<OutgoingServerSettings>
<SMTPHost>smtp.gmail.com</SMTPHost>
<SMTPPort>25</SMTPPort>
<AuthenticationRequired>true</AuthenticationRequired>
<UseSSL>true</UseSSL>
<UserName>[email protected]</UserName>
<Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">pass</Password>
</OutgoingServerSettings>
My company has the same kind of mail server than gmail, so I,m trying to configure this first.
This is domain.log and it`s right, I can´t see where is the problem.
<2008-01-29 09:26:05,006> <INFO> <default.collaxa.cube.services> <Utils::initNotificationMode> Notification via voice, fax, SMS, IM or pager will be sent. Emails will be sent with the current settings. If you would like to enable them, please configure accounts in ns_iaswconfig.xml and then set the NotificationMode attribute in ns_emails.xml to either NONE, EMAIL or ALL.
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Creating connection pool for java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory initial size 20
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Fetched a queue connection from pool java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory, available connections=19
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start of send(type,caller,message) type = email caller = BPEL
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Notification ID 50d528357d42a957:-4d67d6df:117c49fc103:-7fcf
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start Persisting notification in database
<2008-01-29 09:26:05,100> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> End Persisting notification in database
<2008-01-29 09:26:05,100> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start of send(type,caller,message)
<2008-01-29 09:26:05,100> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Released queue connection to pool java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory, available connections=20
Thanks for your answers,
Laura -
When I plug My device To Pc(Windows Xp) It says Problem With Your Apple Mobile Device Drive ,I cheak in Device manger Its shows "This device cannot start. (Code 10)" Help pls..
All I can suggeset is:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Have you looked at the AMDS topic of:
iOS: Device not recognized in iTunes for Windows
Do you have han image capture programs linstalled like for a camers or scanner? -
i use captivate 8, the problem when i make app for android. the sound not heard.
i use android4.4. how i do?
i use phonegap online.
thank youYes I do spend a lot of time in China but I have had problems in other countires as well. I am in China right now.
I have two Gmail accounts and one Cox account. Cox is my intranet provider back home. I have had problems with all three accounts.
I have tried several outgoing port settings. 993, 995 465, 587 are some that I can remember trying.
Sometimes my accounts will go offline without me doing anything. This is all a mystery to me. I don't have any idea why I have trouble like this. A few minutes ago I changed my Cox account outgoing port and took the account on line and I got my incoming email but when I tried to forward an email that I got it would not go out.
Any ideas you have would be helpful. -
Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.
Maybe you are looking for
-
HT1766 How can I keep two versions of backup of the same IOS device in iTunes?
HI, I wish to keep two versions of the same iPad backup in iTunes. Is it possible? Pl. advice. Thanks. K.V.Ramani
-
Not sure how to explain- website difficulties
Okay so here's the problem. I have had a website for a number of years for a film I produced. I am now selling dvd's on Amazon and wanted to update. The web designer said she would not do updates and when I asked how to she said by dreamweaver. Well
-
Como hago para iniciar mi Mac OS si hice una partición y ahora solo me sale la parte de Windows?
Como hago para iniciar mi Mac OS si hice una partición y ahora solo me sale la parte de Windows?
-
Hi, I've tried EVERY SINGLE method ive found online, no luck, here's the deal : I have a 160gb iPod since iTunes 11, im unable to get it work. When i sync it, there are 2-3 alternatives what happens. 1. Music synced but 'No Music' seen on my iPod 2.
-
Hi everybody! Great update with OS 3.0, but have a question. FIND IPHONE........is that in the update or only on the new Iphone 3G S? If it is in the update, where is it........I can't find it. Regards Lonni