Problem with sap bw for hospital

dear all,
in need of your help experts, i am new in sap and have been assigned to create some reports for a hospital i work for,
i ve previously created infocubes and reports for another organisation regarding their purchasing so i ve used all the 0PUR infocubes and 2LIS sources etc,
basically what happens here in this case thus i need some information is:
i created an rfc connection between bw and sap R/3 systems and then tried to activate infocubes through BI content, i first activated the purchasing infocube to check everything was working, i did this 'in data flow before' therefore i ended up with all the relevant infosources, transfer rules etc
BUT then i was asked to retrieve all data from the IS-H module the hospital works with, so i read around and went to activate the 0HC infocubes again 'in data flow before' only this time the structure that was created for me includes an infocube (movement for example) the relevant ODS, transfer rules and infosources but that is as far as it goes ie no datasource or sourcesystem exists in the tree under them like it did with purchasing.
another thing is that when i go to rsa6 in my source system i see all the FI, MM etc modules but cant seem to locate IS-H anywhere
i appreciate your help i am really stuck here

Hello again,
Use the help.sap.com it gives you the most detailed info about the InfoCubes, Datasources, etrc. for that area:
[http://help.sap.com/saphelp_bw31/helpdata/en/3e/e7883c18be411ae10000000a114084/frameset.htm]
see the ones that suit you best.
If the cubes are already installed, you don't need to install them again, but even if you did, you don't need to delete them, they will overwrite them.
Hope this helps,
Regards,
Diogo.

Similar Messages

In case of problems with SAP GUI for Java ...

Hello all,
in case of having problems (errors, ABAP dumps etc.) with SAP GUI for Java, please create an OSS message on component BC-FES-JAV with information described in OSS note 326558
http://www.service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700010521522001.
This makes sure our official support channels get aware of your problem.
Thanks and best regards
Rolf-Martin

Hello Rolf-Martin,
i don't have access to this website to view the note.
The version of the Suse libc is:
GNU C Library stable release version 2.3.2, by Roland McGrath et al.
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 3.3 20030226 (prerelease) (SuSE Linux).
Compiled on a Linux 2.4.20 system on 2003-03-13.
Best Regards,
Piotr Brostovski

Problem with SAP GUI for HTML

Hi SDN
I am creating a SAP transaction iView with SAP GUI for HTML. I have give the Transaction code VA01 but when i execute the the iView it is displaying the SAP Easy Access screen in html. Can any one suggest me how to rectify this error and display the required transaction in html.
Thanks in advance.
Regards
Basha

Hi Basha,
Try this in the browser:
http://<host>:<port>/sap/bc/gui/sap/its/va01?sap-client=100(XXX)
1) It will ask for the username and password
2) Enter the credentials and it should directly take you to the VA01 transaction
If it fails again, try this:
http://<host>:<port>/sap/bc/gui/sap/its/vl31w?sap-client=100(XXX)
This should display the "Create Inbound Delivery NotificationTitle Create Inbound Delivery Notification " sreen."
If it faisl again, there is some problem with the way the ITS has set up. Check with your basis.
Thanks,
Sathya

Problem With SAP GUI for HTML iView

Hi All,
I have created a transaction iView(SAP GUI for HTML) for the T code SE12, when I view the iview, it get loaded for the first time and if I log out and when i again login to the portal and view the transaction iview it is not getting loaded. If I clear the cache(By pressing Ctrl+F5) the same iview get loaded.
Could any one help me in solving this problem
Regards
Sivaprasath

Hi Shiva,
For SAP transaction iViews better to use SAP GUi for Windows option instead of SAP GUI for HTML.
Hope it helps for you..
Cheers
Phani

Problem with SAP logon 720 for printng with Citrix.

Hi,
I have a problem with sap logon 720 when printing for Citrix, one time print and other time don't print....
I try to start SAPLPD for prompt comand... it's start but don't print....
i'm write here for look if other people have this problem... I dont know what I can do.....
Thank you very much....

Hi Itmar,
I was having the similar issue on my Windows Server 2003 Terminal Server. At times SAP prints stop working. Then i changed Printer Type to "G" and it had solved the problem. It skips the use of SAPLPD service and calling windows printing service directly.
Just try with that.
Regards,
Gaurav

Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?

hello,
I went to the PAM in the SAP Marketplace to see if SAP GRC AC 5.3 could connect to SAP R/3 4.7 Enterprise but I can't see all the "Add-On Product Version for...", it's cut off.
Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
If I can't is there any proof about it? I have to show it to a client.
Best Regards,
Pablo Mortera,

Pablo,
GRC AC 5.3 works perfectly fine with SAP's R/3 4.6c, mySAP ERP 4.7 and ECC systems. In fact we have two 4.7 Enterprise systems connected to GRC AC 5.3 system.
You can get the details of supported SAP ERP systems under prerequisite section of Info page of GRC AC 5.3 , it can be accessed on marketplace at -
Downloads-->Installations and Upgrades - Entry by Application Group > SAP Solutions for Governance, Risk, and Compliance>SAP GRC Access Control>SAP GRC ACCESS CONTROL>SAP GRC ACCESS CONTROL 5.3
Just ensure to have proper BASIS and ABAP support pack level as mentioned in prerequisites.
Regards,
Amol

Problem with SAP PI7.0 J2ee Engine starting

Hi,
Problem with SAP PI7.0 Server
I am using AIX6.1 and p570
J2ee engine is not starting but I am able to login to ABAP engine.
When I am trying to long in through internet explorer it is not working.
How to check J2ee engine started or not.
If it is not started then how to start J2ee engine.
If J2ee engine problem is there then how to solve the issue and where to check to solve the issue.

Hi,
How to check J2ee engine started or not.
Check the url http://ipaddress:5xx00/index.html
If this url shows you the system info page then you j2ee engine is up.
If it is not started then how to start J2ee engine.
Check your server0.log file.
If J2ee engine problem is there then how to solve the issue and where to check to solve the issue.
Check for the problems in log file and do search in sdn or in the market place you will get plenty of info read them and try to resolve the errors.
Regards,
Vamshi.

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
Steven

Hi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi.

Problem with Revision level for a Material

Hi All,
I have a problem with Revision Levels for a Material.
I want to know the Revision Level for a particular Material for BOM Creation.
Can anyone please let me know from which Table or Funtion Module can I get the Rev Level, once I pass MATNR (Material) and AENNR (Change Number).
<REMOVED BY MODERATOR>
Thanks and Regards,
Harish Kalla
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

HI,
You can use table AEOI.
Hope this helps.
<REMOVED BY MODERATOR>
Regards,
Sipra
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

Haviing problem with the facebbok for 9800

i hava a problem with the facebook for blackberry 9800, i download it many times but i can not see the i con, i used many ways to find out it, but failed to find it,

Hello nomanmahmoo,
Welcome to the forums.
Have a look at this article which may help you out with your issue.
Facebook icon is missing on the BlackBerry smartphone after upgrading to Facebook
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Litlle problem with nokia maps for 5800 xm

hi evryone,
i have a problem with nokia maps for my 5800 xpressmusi which is i cant find my acces point when itry to GO ONLINE
please help thank you

Hi,
When you switch on your device for the first time, the access points may be configured automatically based on the service provider information in your SIM card. Otherwise contact your operator or service provider to receive the access point settings if you cannot find it..

I have a problem with the indicator for power on the side of my HP DV6-1341el.

I have a problem with the indicator for power on the side of my HP DV6-1341el. Insert the adapter's power jack on the notebook in front of the LED battery charging works, windows detects that the battery is charged, but if I use the diagnostic programs, they tell me they found that the computer is running on battery power and not AC mode.
Where is the problem?
I have also made the maneuver for the recognition by the operating system of the battery and does not seem to be there the problem.
If I use the laptop without battery in AC mode happens that led to the side of the notebook blinks twice, three times and then goes off when I put the power jack.

Go into the Device Manager. Expand the battery device, select the ACPI-Compliant Battery Control Method device, right-click it and select uninstall. After you have done that, right-click any device in the Device Manager and select scan for hardware changes. Your operating system will reinstall the ACPI-Compliant Battery Control Method device.
Post your results whether they are negative or positive to keep us posted.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

One more Problem with SAP query

Hi All,
I am having a problem with SAP query
Execution of SAP query transaction is leading to Dump
the dump says Field 'R01' contains no fields, syntax check on the program shows same error.
When I tried regenerating the Query in SQ01
" Query Specification cannot be use to generate list
Ranked list contains only numeric fields
Please help me

Gianpiero Bucchieri wrote:
> So its important to listening the following tables too: Faktura (invoice), Partner Role, Partnernumber and the requierements number. The table are EKKO EKPO AND VRKPA OR vbkd, but if I join this table the query doesn't listining any results. If I cancel this 3 or 4 table and I start the query, the listening are ok.
>
I am not sure what business process you are describing here - is it some kind of third-party sales order? If so, your join is wrong.
From VB E P, firled BANFN and BNFPO you can go to table EBAN, where in field EBELN you will find the number of the purchase order (if somebody already had an MRP+Me58 run over the PR) which will lead you to table EKKO, and EKPO.
So what we have here (essentially is):
VBAK -> VBAP -> VBEP -> EBAN -> EKKO -> EKPO
But that only solves one of your problems - you still have a long way to go to get invoices, partner and partner roles into there and I am beginning to ask myself what exactly it is you want to evaluate.
Care to explain?
Edited by: Mylène Dorias on Apr 1, 2010 2:10 PM

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Hi Chhayank,
the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
~Florian

Problem with sap bw for hospital

Similar Messages

Maybe you are looking for