Problem with SAP knowledge workbench frontend

Hi Gurus,
I tried to connect SAP knowledge workbench from gui suit but failed, it said a lasted version (more than 7.0) is required for ECC 6 connection. but my gui suit is the lasted one already. are there any settings required for this knowledge workbench connection?
Any responses will be awarded,
Regards,
Samson

Hi,
Please check thread
https://forums.sdn.sap.com/thread.jspa?threadID=183867&tstart=0
Thanks
Santosh

Similar Messages

Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?

hello,
I went to the PAM in the SAP Marketplace to see if SAP GRC AC 5.3 could connect to SAP R/3 4.7 Enterprise but I can't see all the "Add-On Product Version for...", it's cut off.
Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
If I can't is there any proof about it? I have to show it to a client.
Best Regards,
Pablo Mortera,

Pablo,
GRC AC 5.3 works perfectly fine with SAP's R/3 4.6c, mySAP ERP 4.7 and ECC systems. In fact we have two 4.7 Enterprise systems connected to GRC AC 5.3 system.
You can get the details of supported SAP ERP systems under prerequisite section of Info page of GRC AC 5.3 , it can be accessed on marketplace at -
Downloads-->Installations and Upgrades - Entry by Application Group > SAP Solutions for Governance, Risk, and Compliance>SAP GRC Access Control>SAP GRC ACCESS CONTROL>SAP GRC ACCESS CONTROL 5.3
Just ensure to have proper BASIS and ABAP support pack level as mentioned in prerequisites.
Regards,
Amol

Problem with SAP logon 720 for printng with Citrix.

Hi,
I have a problem with sap logon 720 when printing for Citrix, one time print and other time don't print....
I try to start SAPLPD for prompt comand... it's start but don't print....
i'm write here for look if other people have this problem... I dont know what I can do.....
Thank you very much....

Hi Itmar,
I was having the similar issue on my Windows Server 2003 Terminal Server. At times SAP prints stop working. Then i changed Printer Type to "G" and it had solved the problem. It skips the use of SAPLPD service and calling windows printing service directly.
Just try with that.
Regards,
Gaurav

One more Problem with SAP query

Hi All,
I am having a problem with SAP query
Execution of SAP query transaction is leading to Dump
the dump says Field 'R01' contains no fields, syntax check on the program shows same error.
When I tried regenerating the Query in SQ01
" Query Specification cannot be use to generate list
Ranked list contains only numeric fields
Please help me

Gianpiero Bucchieri wrote:
> So its important to listening the following tables too: Faktura (invoice), Partner Role, Partnernumber and the requierements number. The table are EKKO EKPO AND VRKPA OR vbkd, but if I join this table the query doesn't listining any results. If I cancel this 3 or 4 table and I start the query, the listening are ok.
>
I am not sure what business process you are describing here - is it some kind of third-party sales order? If so, your join is wrong.
From VB E P, firled BANFN and BNFPO you can go to table EBAN, where in field EBELN you will find the number of the purchase order (if somebody already had an MRP+Me58 run over the PR) which will lead you to table EKKO, and EKPO.
So what we have here (essentially is):
VBAK -> VBAP -> VBEP -> EBAN -> EKKO -> EKPO
But that only solves one of your problems - you still have a long way to go to get invoices, partner and partner roles into there and I am beginning to ask myself what exactly it is you want to evaluate.
Care to explain?
Edited by: Mylène Dorias on Apr 1, 2010 2:10 PM

Problem with SAP PI7.0 J2ee Engine starting

Hi,
Problem with SAP PI7.0 Server
I am using AIX6.1 and p570
J2ee engine is not starting but I am able to login to ABAP engine.
When I am trying to long in through internet explorer it is not working.
How to check J2ee engine started or not.
If it is not started then how to start J2ee engine.
If J2ee engine problem is there then how to solve the issue and where to check to solve the issue.

Hi,
How to check J2ee engine started or not.
Check the url http://ipaddress:5xx00/index.html
If this url shows you the system info page then you j2ee engine is up.
If it is not started then how to start J2ee engine.
Check your server0.log file.
If J2ee engine problem is there then how to solve the issue and where to check to solve the issue.
Check for the problems in log file and do search in sdn or in the market place you will get plenty of info read them and try to resolve the errors.
Regards,
Vamshi.

Problem with SAP Script FAX output

Hi Friends,
I have problem with SAP Script Fax output.
After I issued output using the messge type, the print preview format shows me correct alignments and the right data. But when I go to List display using the menu bar functions from the print preview screen, the list is showing me the right data, but all the alignments at the main window went wrong.
How do I rectify this problem? I need correct alignments in both form display and list display.

Hi Sasidhar,
Have you tried with different fax machine.
Regards,
Atish

SAP Knowledge workbench

Hi all,
i m having SAP KW 7.0 and i want to login to knowledge workbanch through SAP Frontend but it shows error regarding version.
Error: knowledge workbench version not suppotrd by R/3 systm install latest version.
for this error i reffered note: 336968 but i m not sure abt the recommened version. plz favour me in solving this issue.
Regards,
Rakesh Thakkar.

Hi Rakesh,
the version you enter there is the version of the file sapidbw.exe which you find on your frontend (if the KWB is installed) below:
...\sap\frontend\iwb\idbworks
If you enter this version info into table iwbsetting according to the note, you should be able to work (unless you run into another error.
Kind regards,
Carl

Performance problems with SAP GUI 7.10 and BEx 3.5 Patch 400?

Hi everybody,
we installed SAP GUI 7.10 and BEx 3.5 Patch 400 and detected hugh performance problems with this version in comparison to the SAP GUI 6.40 and BEx 3.5 or BEx 7.0 Patch 800.
Does anybody detect the same problems?
Best regards,
Ulli

Most important question when you are talking about performance-issues:
which OC are you working on and which excel version?
ciao
Joke

In case of problems with SAP GUI for Java ...

Hello all,
in case of having problems (errors, ABAP dumps etc.) with SAP GUI for Java, please create an OSS message on component BC-FES-JAV with information described in OSS note 326558
http://www.service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700010521522001.
This makes sure our official support channels get aware of your problem.
Thanks and best regards
Rolf-Martin

Hello Rolf-Martin,
i don't have access to this website to view the note.
The version of the Suse libc is:
GNU C Library stable release version 2.3.2, by Roland McGrath et al.
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 3.3 20030226 (prerelease) (SuSE Linux).
Compiled on a Linux 2.4.20 system on 2003-03-13.
Best Regards,
Piotr Brostovski

Problem with SAP GUI for HTML

Hi SDN
I am creating a SAP transaction iView with SAP GUI for HTML. I have give the Transaction code VA01 but when i execute the the iView it is displaying the SAP Easy Access screen in html. Can any one suggest me how to rectify this error and display the required transaction in html.
Thanks in advance.
Regards
Basha

Hi Basha,
Try this in the browser:
http://<host>:<port>/sap/bc/gui/sap/its/va01?sap-client=100(XXX)
1) It will ask for the username and password
2) Enter the credentials and it should directly take you to the VA01 transaction
If it fails again, try this:
http://<host>:<port>/sap/bc/gui/sap/its/vl31w?sap-client=100(XXX)
This should display the "Create Inbound Delivery NotificationTitle Create Inbound Delivery Notification " sreen."
If it faisl again, there is some problem with the way the ITS has set up. Check with your basis.
Thanks,
Sathya

Problem with sap script table in main window

hi all,
i have created a sap script for which output is in 7 pages.
except first page all the remaining pages are giving the correct output.
the problem with the first page is iam not not getting vertical lines in the table which is in the main window of page 1.
iam getting the vertical lines correctly in the mainwindow table of all the remaining pages.

Hi,
It's simple,
Pre- U should had declared a second page for the same window with header, main & footer.
now
First when u r looping the internal table provide no of rows eg Row 1 TO 10. in the Loop ( Data Tab)
or
when defing TEXT Go to PC Editor and mention all the fields Under PROTECT - ENDPROTECT.
This would solve the issue.
Thanks
Ravi

Problem with SAP logon by VBA

Hi, I'm new in the community and I'm also new with SAP, so sorry for any errors.
For my work I need to open SAP by excel (VBA); and I have found the code below but it don't work.
Sub Work()
Set app = CreateObject("Sapgui.ScriptingCtrl.1")
Set Connection = app.openconnection("my system", True)
Set session = Connection.Children(0)
session.findById("wnd[0]/usr/txtRSYST-MANDT").Text = "Client"
session.findById("wnd[0]/usr/txtRSYST-BNAME").Text = "User"
session.findById("wnd[0]/usr/pwdRSYST-BCODE").Text = "Password"
session.findById("wnd[0]/usr/txtRSYST-LANGU").Text = "Language"
Session.findById("wnd[0]").sendVKey 0
End Sub
When the macro runs there is this error
Can you help me?
Thank you,
ax_salerno

Hi Alessandro - I am sharing an Excel sub that works for me by opening up logon pad, signing on to production, gettting credentials, then going into SAP and doing a transaction, and finally asking the user to click ok to terminate the session. I think this is something that there were questions on how to do the session close nicely but not sure if there is a solution yet.
Hope this helps.
Regards
Umur
Sub Logon()
'starts by executing logon pad, selecting prod, then enters
id/pwd
'works to sign on to sap and then kill the connection.
refers to saplogon.exe in Program Files/SAP71/FrontEnd/SAPGui folder
Dim SAPguiAPP As Object
Dim oConnection As Object
Dim Session As Object
Dim SAPCon As Object, SAPSesi As Object
Dim SapGuiAuto As Object, SAPApp As Object
If SAPguiAPP Is Nothing Then
    Set SAPguiAPP =
CreateObject("Sapgui.ScriptingCtrl.1")
End If
If oConnection Is Nothing Then
    Set oConnection =
SAPguiAPP.OpenConnection("1. Prod", True)
End If
If SAPSesi Is Nothing Then
   Set SAPSesi =
oConnection.Children(0)
End If
Application.DisplayAlerts = False
With SAPSesi
    .FindById("wnd[0]/usr/txtRSYST-MANDT").Text
= "010"
.FindById("wnd[0]/usr/txtRSYST-BNAME").Text = "USER"
.FindById("wnd[0]/usr/pwdRSYST-BCODE").Text =
"PASSW"
'.FindById("wnd[0]/usr/txtRSYST-LANGU").Text = "EN"
.FindById("wnd[0]").SendVKey 0
    'start extraction
.FindById("wnd[0]").Maximize
.FindById("wnd[0]/tbar[0]/okcd").Text = "/Niw33"
.FindById("wnd[0]").SendVKey 0
.FindById("wnd[0]").Maximize
.FindById("wnd[0]/usr/ctxtCAUFVD-AUFNR").Text =
"8762449"
    .FindById("wnd[0]/usr/ctxtCAUFVD-AUFNR").CaretPosition
= 7
.FindById("wnd[0]/tbar[1]/btn[8]").Press
.FindById("wnd[0]/usr/subSUB_ALL:SAPLCOIH:3001/ssubSUB_LEVEL:SAPLCOIH:1107/tabsTS_1100/tabpKOAU/ssubSUB_AUFTRAG:SAPLICO1:1100/tabsTABSTRIP/tabpTS05/ssubVALUES:SAPLICO1:1105/cntlPMCO_SUM_TREE/shellcont/shell/shellcont[1]/shell").HierarchyHeaderWidth
= 162
.FindById("wnd[0]/usr/subSUB_ALL:SAPLCOIH:3001/ssubSUB_LEVEL:SAPLCOIH:1107/tabsTS_1100/tabpKOAU/ssubSUB_AUFTRAG:SAPLICO1:1100/btnPUSH1").Press
    .FindById("wnd[0]/usr/cntlGRID1/shellcont/shell/shellcont[1]/shell").SelectedRows
= "0"
.FindById("wnd[0]/usr/cntlGRID1/shellcont/shell/shellcont[1]/shell").DoubleClickCurrentCell
.FindById("wnd[0]/tbar[0]/btn[3]").Press
.FindById("wnd[1]/usr/btnSPOP-OPTION1").Press
.FindById("wnd[0]/tbar[0]/btn[3]").Press
.FindById("wnd[0]/tbar[0]/btn[3]").Press
.FindById("wnd[0]/tbar[0]/btn[3]").Press
    'etc
End With
     MsgBox
"After clicking OK, this SAP session is terminated."
Application.DisplayAlerts = True
     Set Session =
Nothing
    Set Connection =
Nothing
    Set SAPguiAPP =
Nothing
End Sub

Problem with SAP Screen

Not sure if this is the correct forum.
Okies, a user of mine has a problem with her SAP screens. It seems that she can't view the full screen of CJ20N She has to drag the window bigger to be able to see the content. She uses this window in a split monitor view, i.e. some of the applications are displaying on the laptop window while other applications display on the monitor.
Details of her SAPGUI:
Release 640 Final
File version: 6404.4.16.1015
Build: 774474
Patch Level : 16
Do note that her primary monitor (notebook) is always set to 1280x800 and the secondary monitor is set to 1024x768. Anyone encounter this problem before?

Hi,
This is problem with windows screen resolution. Better to use, maximum supported window size and make sure to use same size for both the screens.
Regards,
Ganesh

Problem with SAP 7.10

I've a problem with download to xlsf rom ALV GRID with SAP 7.10
Can I execute a patch download for resolve thi problem?
Where I can find it?
Best regards.
Cristiano

Hi,
Please have a look in the below link.
Upgrade SAP GUI 6.40 to 7.10 SAPLOGON problem
/message/6593778#6593778 [original link is broken]
OO Splitter ALV grid's Header data Download
Hope this link are helpfull
Thanks
kalyan B

Problem with SAP Content

Hi,
I have standard SAP business content set up to capture the revenue from my R/3 system.
The cube is 0PCA_C01. I run a query on theis cube and the values do not match the corresponding values in my R/3 P&L statement (for the month of September)
There are 5 revenue accounts and when I do an account comparison in R/3, I find that each of the accounts are off by a small amount.
There have been no corrections or incorrect postings in R/3 and the daily delta update to PCA_C01 has never failed.
Note that when I check the previous months (Aug, July etc) the revenue figures match perfectly.
The accounts were closed a few days ago and no transactions have been posted in R/3 since then. The delta updates for the last few days have been running sucessfully.
Please advise where I can start looking for a solution to this issue.
Thanks and Regards,
Dominic

Hi,
You are saying the report is matching with R/3 for month Aug ,July...etc. So I hope, there is no problem with Query and with update rules..etc.
If you are using Aggreagtes, make sure that all requests are rolloed up. And also make sure that no load is failed .
With rgds,
Anil Kumar Sharma .P

Problem with SAP knowledge workbench frontend

Similar Messages

Maybe you are looking for