Problem with SAPbouiCOM.EditText field

Hey Everyone,
I am experiencing a problem with an edit text box on a form that I created. For some reason when I go into the add mode on the form and type into the field the text disappears as soon as I go to another one of the controls on the form.
If i leave the cursor in that text box the text stays. Has anyone experienced this problem before?
Thanks in advance.

Laura,
I had this problem and the reason was about the datasource.
If you item is linked to a UserDataSource, there is no problem.
If you item is linked to a dbdatasource, you have to ensure the datasource contains at least one record.
Can you show us the part of xml file, or VB code that you use to create your item on you form.
the event that you can catch would be et_validate. But I think it's fired when your text box is linked to datasource
HTH
Sebastien

Similar Messages

Problem with a Dynpro field (type numc)

hi everybody.
I'm developping a ModulPool application in wich i have 2 RadioButtons with 2 textbox fields.
What i pretend to do is, when the user clicks a radiobutton and strikes Intro, enable the corresponding textbox field and disable the other one.
My code runs fine, but i have a little problem. When I loop the screen table, to set the appropiate value to the 'input' property, in this case, when i try to disable it (input = '0'), I get a zero character in that field. This field has NUMC type, i'm sure this is the problem
'cos i've got no problem with the other field (type char). But i can't solve it.
Anybody's got an idea?
Thanks

What you are seeing is the normal behavior of a numeric field represented by the SAPgui. This is how all numeric fields are displayed via SAPgui. If you don't want to see the 0, then you just change the field type to CHAR and handle accordingly.
Regards,
Rich Heilman

Problem with the quantity field

hi every one
i am facing a problem with the quantity field (vbap-kwmeng)
as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid.
among all the fields displayed in the alv grid only this quantity field is editable(end user can change this quantity)
once end user changes this quantity and press save button i need to capture this new quantity in my internaltable.
problem is input of length of quantity is 15 and the output length is 19
so when i am pressing save
say my quantity is 50 when i am pressing save '0.050' is coming because of the length difference
how can i capture the original changed value.
vamsi

what about define two fields in you inner table ,one as char and the other as vbap-kwmeng, you can show the char one in the ALV gird , when user input value and press SAVE ,you can move the value to vbap-kwmeng.
you can test it,mybe some one has one better idea.

Problem with adding new field to the mass change screen in FBL5N

Hi,
We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
If you have faced with such a problem, we would be grateful if you give us some tips.
Regards,
Miłosz Włodarczyk

The problem has been resolved: we didn't activate a code in SE80.

Contract - problem with attachements (empty field in LOIO_OBJID)

Hi Guys,
We are using extended classic scenario of SRM 4.0 (SRM Server 500) and our latest support package is SAPKIBKS12. We have the following problem with contracts.
Sometimes when an attachment is added to a contract the system does not fill the following fields in tabel BBP_PDATT.
LOIO_CLASS: Normally filled with BBP_L_DOC
LOIO_OBJID: Normaly filled with a GUID size datastring
Whenever this happens and later on the contract is changed and released the system will raise an abort. We tried the following notes but no good result.
891293,919467,932602,964065. Some other notes that might be possible are 1042826/1085700/1083063 but we also don't have good experience with these ones.
Can anyone give us advice about two things.
1) Is there a way to fill the empty fields in BBP_PDATT so that existing contract will work properly again?
2) Does anyone know why this problem occurs and how to fix it for new contracts?
Hope to hear from you,
Arie

Thankyou for the reply. I have made following changes but still not working. I am creating the inquiry and customer material is not getting populated. Please guide in resolving the issue.
DATA : W_ENQUIRY_ITEM_INX LIKE BAPISDITMX OCCURS 0 WITH HEADER LINE.
W_ENQUIRY_ITEM_INX-ITM_NUMBER = THEAD-ITEMNO.
      W_ENQUIRY_ITEM_INX-UPDATEFLAG = 'X'.
      W_ENQUIRY_ITEM_INX-CUST_MAT22 = 'X'.
APPEND W_ENQUIRY_ITEM_INX.
CALL FUNCTION 'BAPI_INQUIRY_CREATEFROMDATA2'
   EXPORTING
   SALESDOCUMENTIN               =
     INQUIRY_HEADER_IN             = W_ENQUIRY_THEAD
IMPORTING
    SALESDOCUMENT                 = W_NUMBER
   TABLES
    RETURN                        = W_RETURN
    INQUIRY_ITEMS_IN              = W_ENQUIRY_ITEM
    INQUIRY_ITEMS_INX             = W_ENQUIRY_ITEM_INX
     INQUIRY_PARTNERS              = T_INQUIRY_PARTNERS

Problem with non currency field calculations to become curr

Hi guys,
Is there a problem if I have a QUAN field and DEC field forming to become a CURR field? I mean a have this computation below:
v_var1 = v_var2 * v_var3.
where v_var1 type QUAN, v_var2 type DEC and v_var3 type CURR...
would it incur any problem with the calculations?
Thanks!

Hi,
Did you try ?
Worked for me flawlessly
tables bseg.
parameters : qty like bseg-menge,
amt like bseg-dmbtr.
data : result like bseg-dmbtr.
result = qty * amt.
write result.
The only issue is that the result will be rounded upto 2 decimals.
But if you declare result as
data : result(13) type p decimals 3.
Then there will be no issues.
regards,
Advait
Edited by: Advait Gode on Oct 3, 2008 3:59 PM

Problems with the 'Comments' field in iTunes

First, sorry for my english (I'm danish).
I've read a lot of threads here and everywhere else, but can't find a solution for my exact problem. I use Windows Vista and the newest version of iTunes.
Most of my mp3 songs (35.000) are put directly in album folders to the folder 'D:My Music from another computer via a USB drive and the songs already have id3 tag information on them.
I then add the albums to iTunes and most of my tag information is now updated in iTunes. Names, Artists, Genre, Year, everything is okay. By the way the songs have ID3v2.3 tag information. I see that in my Mp3tag v.2.42 application.
But the problem is with the 'Comments' field:
Those tags (originally put to the songs directly in the proberties of the song in Windows Explorer) will simply not transfer to iTunes 'Comments' field. And if I write something in the iTunes 'Comments' field this will not show up in the fields properties in windows Explorer. It looks like the 'Comments' fields in iTunes and in the proberties in the song are not connected at all!?
I then found out, I could let iTunes convert the ID3 codes, but nothing happens except from when using v. 1.0 or 1.1, because then the comments tag are transferres, but unfortunately all the tags will only show 30 characters!!!
And there's also a different story:
A few albums though are put directly on my computer by using iTunes to import the CD. These songs have ID3 v.2.2 tags, so I guess iTunes import files in that format?
And here it's a little different story. If I put comment data directly to the file proberties in Windows Explorer (after the CD's been imported to iTunes), the comments will show up in iTunes, but only as several 0 and 1 digits! On the other hand, if I put information directly in iTunes 'Comments' field it wil show up correctly in the file proberties! But it's only a few songs/albums that are handled that way.
Well, bottom's line, I want to see my comments tags (which are allready there in the song's proberties) when I browse my music in my folders in Windows Explorer and I want to see the exact same comments if I go to browse my music in iTunes. That should not be a problem ... but it is not ...
Can I please get a solution or at least an explanation, and hopefully in not too tecnical terms.

I, too, hope someone will answer this! I am hoping to catalog my entire CD collection in iTunes and I want to include the storage box number somehow, thinking that "comments" would be a good place to do so. If I cannot do that I'll try to find a program other than iTumes to do it. Does anyone have any suggestions on this topic? ...perhaps I need to open a new thread?
THANKS!
Doug

Problem with Update Text fields in Infoset

Hi experts,
Here i would like to rephrase the question. Normaly while working with Infosets, when press "update text fields" button, those fields having text is updated. But one of my field is not updated. I need some help from you for that.
One more question i've that my field is having check table so i would like to know how exactly the text field is updated.
scenario.
Customized IT9320 has field prt_pos added. This field is having check table T528B. But i want text field to be attached is IT1000-STEXT.
How this can be done, because i suspect that just using check table field IT1000-STEXT is not attached to IT9320-prt_pos.
Please help. I'm really got stuck here.
Thanks a lot,
Toral.
Hi,
I'm working on customised Infotype. I need to add one new customised field ie Present Position. This field has number as well as text associated with it. There is a check table attached with this field so that text can be displayed alongwith number.
I need this field in SAP/Adhoc query. But when i go to SQ02 this fields shows only value. Text is disabled for this field. I'm not sure why is it so.
I looked into other infotype which as one field using same data element, and that field shows both value as well as text. Please help me to rectify this issue for present position field.
Thanks,
Toral.
Edited by: Toral Sheth on Jul 4, 2008 2:01 PM

You would be much better off with one multi-line form field.
There are many problems with trying to determine when one is at the end of the display field with text entry.

Problem with long text field.

Hi all,
I have a problem when I try to concatenate two fields.
It seems the new field only is 254 characters long?
Here is my syntax:
data: w_long_text(1000).
clear w_long_text.
 loop at iline.
 concatenate w_long_text iline-tdline into w_long_text separated by space.
 endloop.
I'm sure the text is longer then 254 becuase I can see the text in an Activity in the Sap Crm system.
Best Regards
Frode

Hi thomas
wat i would suggest you is better take an internal table with long_text(255) field .
data : begin of it_text occurs 0,
 long_text(255),
 end of it_text.
clear : w_long_text,it_text.
loop at iline.
concatenate w_long_text iline-tdline into w_long_text separated by space.
it_text-long_text = iline-tdline.
append it_text.
clear it_text.
endloop.
and when displaying the text keep that in a loop and print it.
This way u can display the whole text irrespective of the char length.
Reward points if helpful
Regards
Zarina

Problem with select max(FIELD)

I have a table with the following fields:
PARTID     ART_TYP     AEC     SERVICE     PLANT     STATUS
4711     A     A     2     P     230
4711     A     B     0     P     230
4712     A     B     2     P     230
4713     A     B     0     P     230
I need a sqlscript where I get the records with MAX(SERVICE)
In this example
4711     A     A     2     P     230
4712     A     B     2     P     230
4713     A     B     0     P     230
I tried this with:
select distinct partid,
     art_typ,
     aec,
     max(service),
     plant,
     status
from t_msltmp
group by partid,art_typ,aec,plant,status
But I get both records of partid=4711
Can someone help me with this problem
kind regards
Menk Slot

ROW_NUMBER() requires explicit ORDER BY clause in OVER:
http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96540/functions105a.htm#86312
SQL> select partid, art_typ, aec, mx, plant, status
2 from(select partid,
3                art_typ,
4                aec,
5                max(service) over (partition by partid) mx,
6                row_number() over (partition by partid order by service desc) rn
7                plant,
8                status
9         from t_t)
10 where rn = 1
11 /
    PARTID A A         MX P     STATUS
      4711 A A          2 P        230
      4712 A B          2 P        230
      4713 A B          0 P        230Rgds.
P.S.
Another way to get this (more tedoius):
SQL> select partid,
2 max(art_typ) keep (dense_rank first order by service desc) art_typ,
3 max(aec) keep (dense_rank first order by service desc) aec,
4 max(service) service,
5 max(plant) keep (dense_rank first order by service desc) plant,
6 max(status) keep (dense_rank first order by service desc) status
7 from t_t
8 group by partid
9 /
    PARTID A A    SERVICE P     STATUS
      4711 A A          2 P        230
      4712 A B          2 P        230
      4713 A B          0 P        230Message was edited by:
dnikiforov

Question of possible problem with "display as" field in MS Outlook contact

Are you aware of any problems with an apparent shift of the display as field in MS Outlook contacts after the initial syncing with their iPhone? When preparing to send an e-mail in Outlook, the auto populating of the "display as" field is now linked to incorrect contacts. Therefore, one could unknowingly send an e-mail to the wrong recipient. After seeing this error, it appears that many of my "display as" fields have shifted among contacts within my Outlook contacts. This appears to have happened right around the first time I synced my iPhone. It could be completely unrelated to the iPhone syncing but I am curious if other iPhone / MS Outlook users have experienced similar problems.

There should be no leeway or movement. Return the phone to where you bought it and show them. It should be covered under warranty unless they determine it was dropped or accidental damage.

Is anyone else having problems with Apertures Date fields?

After experiencing a sysems failure I began restoring my images from backups. I have had no end of problems with Image dates. I have come to the determination that Aperture is NOT using either the "Create Date" or "DateTimeOriginal" as the image "Date" or "Date Created" data if other fields have other dates.
Here is a clip from my image metadata using exiftool:
File Modification Date/Time     : 2012:09:23 19:53:15-04:00
File Access Date/Time           : 2013:01:16 11:34:38-05:00
File Inode Change Date/Time     : 2013:01:16 11:31:32-05:00
Create Date                          : 2006:02:20 11:51:12.10
Date/Time Original              : 2006:02:20 16:51:12.10
Modify Date                          : 2006:02:20 11:51:12.10
And here is what Aperture utilized on import
Date:                               9/23/12 7:53:15 PM EDT
Date Created                         9/23/2012 7:53:15 PM
So Aperture utlized the File Modification Date/Time as the Create Date despite that the fact that the Create Date field is present and is properly formatted in the original image.
According to the Aperture mapping table, this shouldn't be happening.
Now, before someone recommends that I use Aperture's Date Adjust utility - I'm talking about slightly over 30,000 images. Editing images one at a time, or in blocks when you don't know what field Aperture is using as the Create Date would require individual inspection of each image followed by manual adjustment of each image. That approach isn't acceptable.

Hmm ok, let me restate the issue then, I thought I was clear. I could have pointed out in my original post however, that only the EXIF and IPTC date fields were displayed from the metadata dump.
The data set presented in my first post is the EXIF dataset from the file which clearly shows the image was captured by digital camera at
Create Date                          : 2006:02:20 11:51:12.10
Date/Time Original              : 2006:02:20 16:51:12.10
(The delta of 5 hours is the result of Zulu versus local time offset)
But, when I ingested it into Aperture, the import routine utilized the IPTC field
File Modification Date/Time     : 2012:09:23 19:53:15-04:00
which is updated by the OS whenever you move the file around outside of Aperture. (a number of image data fields are updated by the OS - filename for example is another.). This resulted in the image date fields being stamped in Aperture as:
Date:                               9/23/12 7:53:15 PM EDT
Date Created                         9/23/2012 7:53:15 PM
Which obviously came form the File Modification Date/Time field and not (either) the Create Date or Date/Time Original fields.

Problems with the interlaced Fields after burning with iDVD

The original quicktimes have interlaced frames and once I burn them with iDVD seams that there is a problem with the fields, like they are in ht ewrong order or something.
Is there something I'm not doing right?
Anyone?
jd

I Have a similar problem my apple health app hasn't worked from day one - I use my fitness pal and no matter what I do it just doesn't communicat or pass information to apples app - ive even tried a different steps app and that doesn't communicat either. Even running on ISO 8.2 hasn't rectified connectivity issues.
I Wonder if apple is aware of these issues lol

Problem with the hierarchial fields in a Purchase order xml report

Hi,
I am having a problem with the hierarchy problem. We are populating attribute 15 of a PO header. some times it can be null. FYI, we are using 11.5.10 instance where oracle supports direct PO template rather than having a rdf file.
And now in the xml report, if attribute15 of po header is not null then it is fine.
But if attribute15 is null, then the template is picking from the next available attribute15 that is from the po lines. As the line level group of "LINES" is between the "PO_DATA" (header group), hence the template is checking for next available attribute15.
Can any one please suggest how to design the template where we can make the template to check only for that tag at the header level group rather than the line level group tag?
Thank You in advance.
Regards,
Srinivas.

Hi
Incase you want to transfer attachements from SRM to R/3, then you try implementing the BADI in SRM side. The BADI which will help in this case is
BBP_CREATE_PO_BACK BADI.
Please read the standard SAP documentation of this BADI using SE18 Transaction, before making any code changes.
Few Important SAP OSS notes to refer in this case ->
Note 989184 - Transferred shopping cart with internal attachments
Note 550071 - FAQ: EBP - Shopping Cart
Note 916347 - Transfer shopping cart with internal attachments
Note 1001130 - FAQ - Attachment questions (Buyside)
Few useful links ->
http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
Re: Attachments to backend
Re: Document Attachments in Shopping Cart
Re: Attachment in SRM
Re: SRM Documents and Attachments
Re: Limit in Attachments of an item in Shopping Cart
Re: return delivery text from material document is not passed to SUS

Do let me know, incase you face any problems.
Regards
- Atul

Problem with Auo Increment field in Database table

HI...
I have a table with Auto increment field.
I am using Sql Server 2000.
I have a Table Component on front end which is binded with that (auto increment) table.
When I call commitChanges() I receive following exception :
Exception Details: java.lang.RuntimeException
Number of conflicts while synchronizing: 1 SyncResolver.INSERT_ROW_CONFLICT row 2 [sunm][SQLServer JDBC Driver][SQLServer]Cannot insert explicit value for identity column in table 'Authorization_Book' when IDENTITY_INSERT is set to OFF.Anybody knows the solution...

The following excerpts are from http://blogs.sun.com/roller/page/jfbrown?entry=using_creator_to_insert_into. Do they help?
What about IDENTITY or AUTOINCREMENT or other database-generated columns?
This is highly database dependent. Some databases require you to obtain the key through vendor-specific means. Others say "set the value to null". Some say to not include the column in the INSERT statement.
So how do I exclude my IDENTITY or other column from the INSERT statement?
Use the RowSet's advanced insertableColumns property. Create a boolean[] array with one value for each column in the result. Use true to include the column in the INSERT statement, otherwise use false. The RowSet's property sheet doesn't allow you to set this property (in Creator2-EA2), so set the property in your java code.

Problem with SAPbouiCOM.EditText field

Similar Messages

Maybe you are looking for