Problem with SAPConsole Logon

Hi;
We are using SapConsole for using with a barcode reader, in the browser it shows the logon screen, when we type the user and password and then click the ok button, it stays in the logon screen.
we already check the sapgui configuration and is ok.
this app was working ok until yesterday that it behave that way.
So, what can we do to restore the connection with the sap logon and the tcode..? uninstall and reintall again the sapconsole..?
any advice is wellcome.
Thanks on advance
David Funez
Tegucigalpa, Honduras

it got solved reinstalling the SO in the server.

Similar Messages

Problem with SAP logon 720 for printng with Citrix.

Hi,
I have a problem with sap logon 720 when printing for Citrix, one time print and other time don't print....
I try to start SAPLPD for prompt comand... it's start but don't print....
i'm write here for look if other people have this problem... I dont know what I can do.....
Thank you very much....

Hi Itmar,
I was having the similar issue on my Windows Server 2003 Terminal Server. At times SAP prints stop working. Then i changed Printer Type to "G" and it had solved the problem. It skips the use of SAPLPD service and calling windows printing service directly.
Just try with that.
Regards,
Gaurav

Problem with SAP Logon

Hi alls,
I hope can some help me, I'm trying to connect to SAP via SAPLogon.
I've tried to fix the problem but I dont have success.
SAP Logon Properties:
Description: NSP
Application Server: localhost
SAProuter-String: blank
System-ID:        NSP
System Number:     00
Here is the error message.
Runtime Errors         DBIF_RSQL_INVALID_REQUEST
Date and Time          2007-01-22 19:14:39
Short text
     Invalid request.
What happened?
     The current ABAP/4 program terminated due to
     an internal error in the database interface.
Trigger Location of Runtime Error
    Program         SAPMSYST
    Include         SAPMSYST
    Row             2,556
    Module type     (FORM)
    Module Name     FILL_INFO_TAB
SAP-GUI installation:
Release:      640 Final Release
Dateiversion: 640.5.18.1016
Build:        815416
Patch-Level: 18
Can you help me ?
Thanks a lot in advance ..¡
Ralph Hübner

Hi,
Try to check you DB server installation. It seems to be some issue with your Database server.
With Regards,
Rajesh V.

Problem with SNC logon to Analyzer

Hi friends
We configure SNC for BW system logon. It works fine for GUI. But when we use Analyzer the problem occurs:
Ｍｉｓｓｉｎｇ　ＳＮＣ＿ＬＩＢ＝IN CONNECT_PARAM IN RfcOpenEx
Why this happen?
we have done the checking:
existence of Kerberos dll in /windows/system32
active directory settings for a SAPServiceSID user
advance setting in saplogon
It looks fine. Do we miss sth? Maybe there's some configuration for Analyzer? Thank you very much.

We were attempting standard publishing configuration but it would not work until SNC was installed. Once installed the publishing worked. But that's when the authentication issues started.
We can login to infoview with SAP credientials no problem. But with the SNC turned on in BOBJ, its as if that first login means nothing. If you attempt to execute a report it shows cached paramaters and is apparently not authenticating against our SAP backend system. When you turn the SNC off via the CMC in BOBJ, the reports execute correctly authenticating against SAP backend.
With SNC on, if you try to execute a report, nothing happens. As mentioned above, it's as if it's not communicating with the backend data source. With SNC off, all works well but we just can't do the publishing/bursting.
Thanks again,
Sage

Problem with user logon in b2c webshop

hello,
i have registered as a consumer in BC webshop CRM,soon after creation i could able to logon into the shop,but when i logoff and again logon with the created logon info it says logon is invalid.
Iam using the same same address data which is related to the sales area used in the during webshop creation,even then the problem is persisiting,
one more question,can we create any user in CRm system and use that logon info
to login to b2c webshop,i mean the other wau round will it work,
if yes please answer me how.
thanks
chandu

Hi Chandrashekar,
Please in the backend whether you are credentials are attached to a consumer group.
Also check from your system administrator, whether your user id is in active state and has the required roles.
I don't there could be any problem except. Please revert back.
regards,
Prashil

Problem with Agent logon

Hello,
Rather a question then а problem.
When agent try to logon he gets this message:
An extension on the agent phone is shared with one or more other devices.
This configuration is not supported
Which is normal if the line is shared, but the CUCM doesn't show that the line is used by other device, most likely we remove the line from first device and add it to another one BUT the first device was associated with Application user, and to resolve the problem we have to remove the first device from application user controlled devices (deassociate it) and leave there just the second device
So my question is: is this normal behavior or it's a bug? And do we have to do that all the time when we change the line to other device? Because to do that we have to know the MAC address (Device Name) from first device (old one), find it in Controlled Devices in Application user and remove it. When you already removed the line from some device it's hard to find identificate it, especially if you don't have some clear device name (different then SEP....).

I've seen this happen where the UCM database isn't 100% correct a reboot usually fixes it.
david

Problem with SAP logon by VBA

Hi, I'm new in the community and I'm also new with SAP, so sorry for any errors.
For my work I need to open SAP by excel (VBA); and I have found the code below but it don't work.
Sub Work()
Set app = CreateObject("Sapgui.ScriptingCtrl.1")
Set Connection = app.openconnection("my system", True)
Set session = Connection.Children(0)
session.findById("wnd[0]/usr/txtRSYST-MANDT").Text = "Client"
session.findById("wnd[0]/usr/txtRSYST-BNAME").Text = "User"
session.findById("wnd[0]/usr/pwdRSYST-BCODE").Text = "Password"
session.findById("wnd[0]/usr/txtRSYST-LANGU").Text = "Language"
Session.findById("wnd[0]").sendVKey 0
End Sub
When the macro runs there is this error
Can you help me?
Thank you,
ax_salerno

Hi Alessandro - I am sharing an Excel sub that works for me by opening up logon pad, signing on to production, gettting credentials, then going into SAP and doing a transaction, and finally asking the user to click ok to terminate the session. I think this is something that there were questions on how to do the session close nicely but not sure if there is a solution yet.
Hope this helps.
Regards
Umur
Sub Logon()
'starts by executing logon pad, selecting prod, then enters
id/pwd
'works to sign on to sap and then kill the connection.
refers to saplogon.exe in Program Files/SAP71/FrontEnd/SAPGui folder
Dim SAPguiAPP As Object
Dim oConnection As Object
Dim Session As Object
Dim SAPCon As Object, SAPSesi As Object
Dim SapGuiAuto As Object, SAPApp As Object
If SAPguiAPP Is Nothing Then
    Set SAPguiAPP =
CreateObject("Sapgui.ScriptingCtrl.1")
End If
If oConnection Is Nothing Then
    Set oConnection =
SAPguiAPP.OpenConnection("1. Prod", True)
End If
If SAPSesi Is Nothing Then
   Set SAPSesi =
oConnection.Children(0)
End If
Application.DisplayAlerts = False
With SAPSesi
    .FindById("wnd[0]/usr/txtRSYST-MANDT").Text
= "010"
.FindById("wnd[0]/usr/txtRSYST-BNAME").Text = "USER"
.FindById("wnd[0]/usr/pwdRSYST-BCODE").Text =
"PASSW"
'.FindById("wnd[0]/usr/txtRSYST-LANGU").Text = "EN"
.FindById("wnd[0]").SendVKey 0
    'start extraction
.FindById("wnd[0]").Maximize
.FindById("wnd[0]/tbar[0]/okcd").Text = "/Niw33"
.FindById("wnd[0]").SendVKey 0
.FindById("wnd[0]").Maximize
.FindById("wnd[0]/usr/ctxtCAUFVD-AUFNR").Text =
"8762449"
    .FindById("wnd[0]/usr/ctxtCAUFVD-AUFNR").CaretPosition
= 7
.FindById("wnd[0]/tbar[1]/btn[8]").Press
.FindById("wnd[0]/usr/subSUB_ALL:SAPLCOIH:3001/ssubSUB_LEVEL:SAPLCOIH:1107/tabsTS_1100/tabpKOAU/ssubSUB_AUFTRAG:SAPLICO1:1100/tabsTABSTRIP/tabpTS05/ssubVALUES:SAPLICO1:1105/cntlPMCO_SUM_TREE/shellcont/shell/shellcont[1]/shell").HierarchyHeaderWidth
= 162
.FindById("wnd[0]/usr/subSUB_ALL:SAPLCOIH:3001/ssubSUB_LEVEL:SAPLCOIH:1107/tabsTS_1100/tabpKOAU/ssubSUB_AUFTRAG:SAPLICO1:1100/btnPUSH1").Press
    .FindById("wnd[0]/usr/cntlGRID1/shellcont/shell/shellcont[1]/shell").SelectedRows
= "0"
.FindById("wnd[0]/usr/cntlGRID1/shellcont/shell/shellcont[1]/shell").DoubleClickCurrentCell
.FindById("wnd[0]/tbar[0]/btn[3]").Press
.FindById("wnd[1]/usr/btnSPOP-OPTION1").Press
.FindById("wnd[0]/tbar[0]/btn[3]").Press
.FindById("wnd[0]/tbar[0]/btn[3]").Press
.FindById("wnd[0]/tbar[0]/btn[3]").Press
    'etc
End With
     MsgBox
"After clicking OK, this SAP session is terminated."
Application.DisplayAlerts = True
     Set Session =
Nothing
    Set Connection =
Nothing
    Set SAPguiAPP =
Nothing
End Sub

Problem with sap logon/bex

Hello Peoples,
I have a machine is the same with Windows Vista Home Premium, sap logon 7.10 - patch 11
Access to the SAP system is perfect, but when I try to open the Bex query designer after informing username and password I get the error of communication rfc.
Can you please tell me know how can I fix this error? or if Bex is compatible with Vista Home Premium?
Regards...

Hi,
Yes,BEx is compatible with Vista Home Premium Edition.
You will get an RFC Communication Error,if the backend system is down or if you enter the language as blank(sometimes) in the SAP Logon.
Try opening other tools like WAD,RD and Analyzer and connect with backend and check whether it works or not.Try opening QD from WAD or Analyzer
This is not tool specific anyway.
Rgds,
Murali

Problems with SAP Logon ticket

Hi.
I am trying to send SAP Logon ticket from ECC 6.0 to the backend legacy using Soap adapter in receiver side. I get the following error in SXMB_MONI, so it looks like AF is not accepting the ticket. Can anybody tell me please, how I can identify that the ticket has been received in PI's side?
<Trace level="1" type="T">Principal Propagation connection attributes</Trace>
<Trace level="1" type="T">Host = hostname</Trace>
<Trace level="1" type="T">Port = 12345</Trace>
<Trace level="1" type="T">Transport protocol = HTTP</Trace>
<Trace level="1" type="T">Transport protocol vers = 1.0</Trace>
<Trace level="1" type="T">Message protocol = 003000</Trace>
<Trace level="1" type="T">Path = /MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">Security: Logon Ticket</Trace>
<Trace level="1" type="System_Error">Error while sending by HTTP (error code: 403, error text: Forbidden)</Trace>
</Trace>
Thanks, Jukka

Hi.
I have had some progress. Actually Principal Propagation works well now, thanks to instructions in http://help.sap.com/saphelp_nwpi711/helpdata/en/48/a9bbb97e28674be10000000a421937/frameset.htm
But I think I have now found out that the principal progation might not be a direct answer to my problem. In the end of the day I should be able to deliver UsernameToken in my soap message header. Something like this:
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
|          <wsu:Timestamp wsu:Id="Timestamp-12134742" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
|             <wsu:Created>2007-10-14T12:45:34.656Z</wsu:Created>
|             <wsu:Expires>2007-10-14T12:46:34.656Z</wsu:Expires>
|          </wsu:Timestamp>
|          <wsse:UsernameToken wsu:Id="UsernameToken-33259721" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
|             <wsse:Username>test</wsse:Username>
|             <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">test</wsse:Password>
|          </wsse:UsernameToken>
|       </wsse:Security>
I just have not found any documentation which I could utilize in Abap Proxy - PI 7.1 - Soap Receiver scenario. Just wondering should I create my own customized soap envelope and disable the Pi envelope in SOAP communication channel...
Do you know if there's any "standard way" to configure this kind of configuration?
Br. Jukka

Registry problem with user logon

Hi all: We have moved our Windows 7 clients away from ZCM delivered DLU policies. As such our users need to log into our domain as part of the login sequence. However, when my users go to select the domain (advanced options/windows tab) is always shows their local workstation and not the domain. Changing this to the domain has no affect.
I have traced the problem to "HKLM\Software\Novell\Login\Profiles\Users\usernam e\Default\Tab3" is set to the local machine name. If I manually delete this value my users can login to the domain; I have defined a system default domain setting.
So here is my question: Without knowing the user names under the "Profile" key, how can I automate the remove of this value "HKLM\Software\Novell\Login\Profiles\Users\usernam e\Default\Tab3"? Or is it easier to just delete the entire "User" key and all below it?
Thanks, Chris.

AS always, Thanks.
>>> Craig Wilson<[email protected]> 2/11/2014 11:48 AM >>>
I would recommend posting in the Client Forums as this is a Client Key.
You may be able to whack a whole subkey.
If there is a simple parent key that can be killed, that is simple with
ZCM. However, I'm not sure what is safe. I will leave that the the
Client Chaps.
On 2/11/2014 9:31 AM, cmosentine wrote:
> Hi all: We have moved our Windows 7 clients away from ZCM delivered DLU
> policies. As such our users need to log into our domain as part of the
> login sequence. However, when my users go to select the domain
> (advanced options/windows tab) is always shows their local workstation
> and not the domain. Changing this to the domain has no affect.
> I have traced the problem to
> "HKLM\Software\Novell\Login\Profiles\Users\*userna me*\Default\Tab3" is
> set to the local machine name. If I manually delete this value my users
> can login to the domain; I have defined a system default domain setting.
> So here is my question: Without knowing the user names under the
> "Profile" key, how can I automate the remove of this value
> "HKLM\Software\Novell\Login\Profiles\Users\*userna me*\Default\Tab3"? Or
> is it easier to just delete the entire "User" key and all below it?
> Thanks, Chris.
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Problem with sapdp00 unknown error

Hallo,
I have a problem with sap logon,it gets me the above error when i try log on,
i check the registry at Database path and the link is ok i think,what else could it be,i reistall tha sap gui but it doesnt work again...any solution???

Hi,
I think u did not enter the sapdpxx in services file.Goto below path
<b>C:\WINDOWS\system32\drivers\etc\services</b>
set <b>sapdpxx 32xx/tcp</b> in services file(here xx denotes u r instance number).
i hope it will you
kiran kumar.v

Problem in SAP Logon

Hi,
I am Sikander (J2EE Developer). Currently i am working on SAP ABAP. For this purpose i have downloaded SAP Netweaver 2004 Sneak Preview and SAP GUI. These products are installed sucessfully but i am having problem with SAP logon.
My Computer Name is shahbaz. My System Configurations are :
Description: NSPSIK
Application Server: shahbaz
System ID: NSP
System Number: 00
I am having "partner not reached- connection error" message dialog. Please help me in this regard, i am stuck in this.
Thanks in advance,
Malik Sikander Khan

Hi Sikandher,
step 1:- Check network a) Try to ping your SAP server
sep 2 :- Check ini files and hosts file
copy hosts.txt,saplogon.ini,sapmsg from the working gui system to gui prob system.
Location of file
hosts.txt : c:\windows\system32\drivers\etc
saplogon.ini:c:\windows
sapmsg: c:\windows
note:- before copying the above file , please close all the application on users machine.
check the database path vaue from the registry
Hkey_local_machine/system/services/current/controlset/tcpip/parameter
make sure database path value is c:\windows\system32\etc

Problem with program working on WF Terminal through SAPConsole

Dear all,
I have some WF Terminals, Terminal server with SAPConsole and Z-transaction. The problem is that this Z-transaction works fine on my computer through SAP GUI. But when I start it on WF Terminal (Barcode scanner) it works only till the moment when the data changes (BAPI calls). It writes "Processing" on the screen and after some time the session terminates. I tried to use BDC call of transaction MB1B instead of BAPI - the same result. Works fine on my computer but "Processing" and terminate on Barcode scanner.
May be I should do some tunes for the barcode terminal or something else?
Please, help me!

Here is the solution I have eventually found :
1- Application of the OSS note 559276 which enables the customizing of the workflow variant (the transaction OBWD becomes here effective)
2- Assignment of the documents types, workflow variants and release approval groups with the transaction OBWD.
Therefore, the document types that are not defined in the transaction OBWD will not require validation (no workflow will be launched).
SL

Problem with Policy "Display information about previous logons during user logon"

Hello,
I've a problem with the Policy "Setting Display information about previous logons during user logon".
It is applied correctly on computer, but I can't login anymore and message "Security policies on this computer are set to display information about the last interactive logon. Windows could not retrieve this information. Please contact your network administrator
for assistance" is appearing.
My home test domain has 2008 R2 functionality level since months, and I've raised my company infra level functionality to 2012 this morning. Both domain are making the same error.
This is non-sense, so any idea how to troubleshoot it ? Thanks in advance ! ;-)
PS : I was able to remove it in order to login again, no worries on this one...

Did you follow the guidance in http://technet.microsoft.com/en-us/library/dd446680%28v=ws.10%29.aspx?
Especially the following paragraph - the setting has to be applied to DCs and Members...:
You configure last interactive logon through a GPO. You must configure the following setting for the GPO with domain controllers in its scope of management if you want to report last interactive logon information to the directory service:
Computer Configuration| Policies | Administrative Templates | Windows Components | Windows Logon Options | Display information about previous logons during user logon = Enabled
If you want to display last interactive logon information to the user, you must configure this setting for both the GPO with domain controllers in its scope of management as well as any GPO with Windows Server 2008 and Windows Vista client
computers in its scope of management.
Martin
NO THEY ARE NOT EVIL, if you know what you are doing:
And if IT bothers me - :))
Restore the forum design -
Martin-
I'm struggling with the TechNet article you direct us to. We see in the TechNet article that Last Login Notification works ONLY with Server 2008 R2 and Vista. Do we interpret that correctly?
We need it to work with Server 2003, Server 2008, Win7, Win8, Win8.1, Server 2012, et. al.
What is the work around to enable *Last Login Notifications to Users* functionality for these OSs?
Thanks in advance,
Robin

Problem with the agent console created in the ESSO-Logon Manager 64 bits

Friends,
When I use the installer that I created in the console ESSO-Logon Manager for 32-bit, this I install it on the client side and when I synchronize with the console-Logon Manager ESSO brings me and I can see the agent all the templates I configured.
I have a problem with the agent console created in the Logon Manager ESSO-64bit.
When I use this installer on the client stations and then by the agent does not envision the applications that I have configured in the console.
This causes you can not do single sign on to applications that I have configured in the client stations
To generate this installer use the source name: ESSO-LMx64.msi
Can someone please help me with this problem, this only happens when I use the msi installer on 64-bit client stations.
Thanks.

Jackson_Bill wrote:
What IDE are you using and what platform?Read first.
Moh Bob wrote:
I'm using J2ME platform SDK 3.0
db

Problem with SAPConsole Logon

Similar Messages

Maybe you are looking for