Problem with Satellite X200 and keyboard to make @ with AltGR and 2

Ok... Here is my problem.
I have Norwegian Vista, language set to norwegian, and us Ctrl+alt+2 or AltGr+2 to get @.
Now I cant make it work.
Nothing happens if I press those buttons and 2. Both buttons work.
If I press AltGr+8 I get this: [
This happened after my last bios upgrade I think.
Any ideas?
In the language toolbar at bottom language set to Norwegian.

Ok. After pressing all the buttons over and over again I have discovered this.
If I hold AltGr in and then press Alt I can use the 234 buttons to get to these items@£$,
but it should do this without having to press the alt button...
So this is what I have to do.
Hold AltGr and while holding altgr press Alt and still holding altgr press 2347890 depending on what sign I need.
Really annoing.

Similar Messages

When listening to nano 6th gen with dock the audio book will make beeping noises and then switch to a song.

While listening to my 6th gen nano on a JBL dock the audio book will make beep noises and then swith to a song on my nano. Any idea? Thanks.

I saw your other post, but thought I would reply here as well. It is all about getting that headset seated all the way. If you can see any silver of the plug, it is not in far enough. Push harder. If it just won't go in, look in there to see if it is blocked. The bottom of the headset port is white, so if it appears all dark at the bottom... something is in there.
i

Lost all bookmarks, history, and ability to make new bookmarks and record new history

that basically says it.
also lost function of back and forward function and indication of website address . All of this is really pissing me off!

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

What is the default screen brightness setting and keyboard backlight brightness default setting, and how to you go back to default?

What is the default screen brightness setting and keyboard backlight default setting? I just got a new Macbook Air and fiddled a lot with it, and now just want to know how to set the brightness levels back to default. Thanks everyone!

Hey sberman,
I maxed out the screen brightness before I clicked on "restore defaults" in system preferences> energy saver (which has to do with battery, not exactly screen brightness) to see if the screen went back to a "normal" brightness level, but it didn't. I don't think it restored the brightness to default..

HT1918 I changed my info and tried to make a purches and it didn't work

It says iTunes not Available

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Video problem with Satellite X200-25G (PSPB9E)

Hello
I'm having this laptop about a year, and I have this problem with Windows Vista (genuine), Windows XP (with modification with video driver). Video driver is newest without problems, except one.
I'm working with SolidWorks, and the problem is only in this product. You can see the problem, if you see this link http://www.youtube.com/watch?v=wi0gCJTJRrg . Some parts just go missing, even when is one part, just one of the wall of the part go missing (shows like mirror) I tested with any kind of this Product (SolidWorks 2008, 2009) Windows XP, Vista x32, but every time is the same.
Probably the problem is not in the product (SolidWorks), probably it is not in the software, driver and OS (because I tested with two version of nvidia genuine video driver without any problems of installation).
I'm almost sure, that the problem is in that, video card is not suitable with this product, even the purpose of the video is for multimedia and gaming, which is so close with the job which I do.
Can you give me some advice? Thanks in advance, and sorry about my English Skills

I believe that most people here after watching this video will not understand what your problem is.
In my opinion you should visit nearest Toshiba authorized service provider, put your notebook on the desk and explain exactly what kind of problems do you have.
Otherway if you have problems with third part software you should contact manufacturer and ask for help. They have best experience with own product and I believe they can help you about it.
Notebook manufacturer must offers best driver for built-in hardware and offer best graphic performance for usual every day work on this notebook model.
Toshiba and all other notebook manufacturers cannot test several thousand available products and check the graphic card performance.
Try to contact SolidWorks support.
Good luck.

HP Elitebook 6930p - Touchpad and keyboard not working with Windows 7

Hi all,
I have 6930p, installed Vista Bussines from factory installation and upgraded it to Windows 7 Ultimate. It all went fine, all devices worked. After the first restart, keyboard and touchpad stop responding. I attached USB mouse and keyoboard, and found errors in device manager for these two devices. I tryed to uninstall them and reinstall, but all I get is errors:
http://img63.imageshack.us/i/47752933.png/
http://img7.imageshack.us/i/71062213.png/
In device manager I have the same error message, and devices are listed as unknown.
When I try to use windows update, it finds the drivers I need but it can not install them.
http://img193.imageshack.us/i/71145406.png/
The OS is 32bit, Windows 7 Ultimate. I can not get it work, please help or reffer me to some other place where I can try to find a solution.
Thanks in advance.

Hi,
All driver for Win7 are avaible for Your model here.
To solve Your problem with keyboard install HP Quick Lunch Buttons.
To solve Your problem with touchpad install Synaptics touchpad.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

T510 Mouse and Keyboard stops working with Windows Update - unable to roll back, happened twice

My mouse has been working fine for a while but it stopped working followed by the keyboard, I put it down to a Windows update but because Windows 7 keeps bluescreening on a restore point I couldn't recover. I contacted Lenovo got the rebuild disc for my machine, completely rebuilt it, all working fine, then after 2 days same issue, mouse stopped, keyboard stopped, restore points make no difference. Does anyone know what windows update is causing this and if there is a fix aside from rebuilding, I can't keep doing this and I need to understand the cause really, not had it with a laptop before. Gone back to using my old laptop until I can get it sorted. Does anyone have any ideas?

I installed the latest drivers via windows update and got the touchpad back, rebooted, it went again. Netiher the trackpoint or touchpad work. I then thought rather than focus on drivers check the bios. I disabled the trackpoint in the bios, still neither works, however if I disable the touchpad in the bios and enable the trackpoint, the trackpoint does consistently work. I can't explain why the touchpad worked after a touchpad update but now fails, the ultranav driver is installed but if both are enabled in the bios it say it isn't installed, if the trackpoint is enabled it tells me I need to enable both so it clearly knows it's there. What's curious is that this doesn't happen on the complete clean IBM build. I can't not turn off windows updates, I'm a developer so Ioad the laptops up with a vast variety of software and I need many of the windows update fixes, either way I am surprised they are conflicting with the touchpad so dramatically. I can't see it being a virus I'm using two layers of protection and if I blow the machine away and installed the updates via an .iso image (so it's never connected to anything else), I can replicate the problem. It's feasible it's another piece of software causing the conflict. Any one have any idea what could be going on or seen it before?

Satellite X200-25I (keyboard) key

My "End" key has fallen off my keyboard. Does anyone know the part number and/or where to get hold of a spare key? I've had a look on ebay, but there's no x200 keys, but similar looking ones.

I know of such a website which sells individual laptop keys and trust me you dont have to buy a new keyboard for just a single key. They sell genuine keys with their retainer plastic pieces for just $5. Check out
Browse through your brand name, model number and order your required key. Its that simple.
The best part is, you can repair your broken keys yourself by watching the video tutorials on the website.
Hope this helps!
+Message was edited: link has been removed - not allowed+

Mouse and keyboard stop working with Mavericks

This has happened twice now since installing Mavericks.
I'll be working along, and then all of a sudden, I am not able to click with my mouse and my keyboard stops working. I AM able to move the cursor around on the screen. But, I am not able to click on anything and I can't use the keyboard to force quit the finder. The only way to get unstuck is to press the power button on the front of the Mac to shut it down and then restart.
I am using a wired Apple Keyboard and a wireless Apple Magic Mouse. My Mac is a MacPro 2 x 2.3 GHz Quad-Core Intel Xeon Mac.
Like I said. this has never happened before. But it's happened twice since installing Mavericks.

Everytime I restart my computer, especially for updating maverick, my keyboard and attached mouse (both apple for an Imac) stop working. When I plug in an other keyboard, I can get into my Imac again. Would this SMC apply to this problem as well?
What should I do?
thanks, hb

My experience with Satellite X200

Hi everybody,
For those of you who are planning on upgrading your X200 laptops, here's an advice from own experience.
1 - Upgrade your RAM from the stock 2GB to 4Gb. I bought my 4Gb on Ebay for 57 euros.
You'll notice a REAL increase on your system's speed. Specially if you deal with large photos or video, like I do.
Windows Vista only recognizes 3 GB of Ram, but the remaining 1Gb will be reserved for your graphics card. You'll notice a much better graphics performance as I did. No image jumps and more fluid images using big resolutions and heavy settings.
2- Don't spend your money upgrading your 4.200 RPM HDD for a 7.200 unless you REALLY NEED IT.
My computer comes with a 300Gb 4.200 RPM HDD. I installed a 100 Gb 7.200 RPM Seagate Momentus and didn't find a dramatic speed increase, so went back to large drive.
Cheers,
Andre Antunes
X200-1AA
T7700 2,4Ghz CPU
4Gb DDR2
300Gb HDD 4.200 RPM
8700 GT Graphics Card.

Hi andre
Thanks for this advice. I really appreciate it.
Just a small comment regarding the point 1.
As far as I know the Vista recognizes only the 3GB of RAM because of the 32bit OS limitation. But Microsoft released an Vista SP1 Beta version.
Its a beta version and not fully tested but it should solve the issue with the 3GB RAM. After the SP1 installation the Vista should recognize 4GB.
Best regards

5.1 Sound System with Satellite X200

Hi,
this is my first post here since up until now I've been able to solve all issues regarding my laptop. In the meantime, I acquired a 5.1 sound system to connect to my machine thinking it would be pretty straightforward due to all the technology implemented in this model and the SPIDF output and so on and so forth....well it wasn't :)
I've searched online for a solution but nothing obvious came up, and I've tried just sticking the sound system jacks everywhere just to experiment and see what I get but apparently there's always only 2 speakers working plus the bass.
Can anybody give me a hand?
Thanks in advance, best regards from Portugal
Bruno Belo

Boas!
The x200 sound system is a 2.1 system, so to have a 5.1 system you need an external decoder and bypass the internal system using the SPDIF output.
Did you really aquired a 5.1 sound system or just a 5.1 speaker system ? If is really a decoder you should have a digital input to plug the SPDIF output and configure it to play at least 4.1 with an stereo source, an mp3 for example.
If you only have a 5.1 speakers system(even digital) you'll need an 5.1 external sound card, some are USB interfaced others pcmcia.
Regards from Azores ;)

Trouble with Satellite A215-S4757 - websites have been not responding and hanging

I've run computer virus scans, and diagnostic programs and the only thing that comes up is that the intel 82852/82855 gm/gme graphics controller is not working properly. I've updated it in device manager and it says it is up to date. Don't even know if this is the problem. The only code it gives is a code 10. Any help would be appreciated
Solved!
Go to Solution.

Happy to learn all is well, Brian. Thanks for letting us know.
-Jerry

Satellite X200-25H - 3 beeps on start up and wont boot-up

Hi guys, I'm looking for a little advice before I get in touch with Tosh, it might be something I can fix myself hopefully.
I Have a slight issue with my laptop at present. I've turned it on this morning and received 3 beeps on start up (a quieter beep pause then loud beep pause then another loud beep) and fails to boot. I have the power, battery and standby lights on lit and the fans appear to be whirling ever so slightly but I cant get no POST or the Toshiba Screen to appear. On the surface it looks like a hardware fault, the thing is in the few years I've had this laptop, I've not experienced any issues what so ever.
It was fine shutting down last night, the error seems to have appeared from nowhere.
Any idea what these 3 beeps could point to? I've had a quick look this morning ie re-seating the RAM and Hard Drives but I got fed up trying to figure out which of the 100 more screws I needed to undo to get to the GPU's and CPU haha. Just looking for a little direction.
Kind Regards
Tony
Message was edited by: TonyTurbo

Hi
Yes, the single motherboard is very expensive so if warranty is not valid anymore then its not worth to spend the money only for new mobo.
>>It is unfair that after spending lot of cash for the notebook, it didn't last longer than 3 1/2 years completely disappointed with Toshiba now.
Guess what? My dad bought a notebook from another manufacturer; the notebook did not boot up after 3 month of usage. Fortunately the warranty was still valid.
So its just a bad luck dude. Notebook can start to malfunction after some days/weeks of usage of after years or it will run properly the whole time.
Ive got two Toshiba notebooks. Until now everything works properly.

**** Bluetooth and keyboard issues after latest itunes and 10.6.5 update.-

read below
Message was edited by: Paulman!

Have been experiencing intermittent keyboard, trackpad and usb mouse function issues after installing the latest system and itunes updates, which was yesterday or day before.
(Lost even some work because the only way to get things moving was to restart.)
Tried solution (verify and repair disc permissions) that coconutmunk recommends under similar topic from 2007:
http://discussions.apple.com/thread.jspa?threadID=1190210
That solution fixed worst part of the problem: getting all 3 parts irresponsive.
It seems as problem is still not entirely solved as computer has once tried to lock all 3 again, however before I had chance to get concerned it locked up all 3 again by itself.
Yet, usb mouse keeps on getting disconnected every now and then randomly, even after 2 runs with disc permission solution.
Conclusion from 2007topics where people had issues with keyboards and/or mouse devices, was that it was Leopard system having those problems, nothing like that was reported in about Tiger system, as it seems.
Now, those problems were fixed back then with an update, but seems this new update has brought back old issues!
Frankly, I really do not have time with computer issues, on top of Maya being characteristically moody already every now and then, as I have to be done with a pretty big project only within few days!
Please PLEASE, Apple crew, fix this issue asap!
I really need those things working properly quick!
Thanks in advance!

Problem with Satellite X200 and keyboard to make @ with AltGR and 2

Similar Messages

Maybe you are looking for