Problem with saving InDesign newsletter to a print ready PDF in CS6

I am using a PC and created a 4 page newsletter in InDesign, CS6. I have made this newsletter over and over in previous version of CS products and never had a problem. But with CS6, I cannot get it to save as a print-ready PDF with the bleeds and markups the printer needs.
I have the Document Setup set to a bleed of 0.25 all around. I have tried Printing to PDF, Exporting, and Print Booklet. Printing to PDF doesn't show the bleeds and markups. Exporting doesn't show the bleeds and markups. Print Booklet only shows the bleeds and markups if I shrink the file down with a Scale to Fit...which won't work for the printer. I have tried everything thing I can think of, tried changing all kinds of printer settings...I seriously have no idea why this isn't working.
Any suggestions?

Well, the obvious thing is to make sure you've got "Use Document Bleed Settings" checked in the export dialog AND that you've got trim marks turned on. YOu should save a custom preset to do this along with the other settings your printer requires.

Similar Messages

Problem with page breaks in IE when printing to PDF

Hey,
I am having formatting issues with IE when printing to pdf, I have a dynamically created report which has page breaks at the end of each page, if I open this report(report is in html) in firefox and goto print the formatting is correct, if I open the same report in IE and print the report 80% of the pagebreaks are in tact, 20% are ignored which just makes the report look rubbish, my question is,( I know it not directly related to the reader but was unsure on which forum to post) is there a different css or formatting I should use to make IE play ball.
Cheers
Tom.
the style I use to insert pagebreak is
<code>
.breakhere {page-break-before: always;}
code I then use to implement it is.
<TABLE BORDER=0 WIDTH=100% CELLSPACING=0 CELLPADDING=0 CLASS="breakhere">
</code>

You may use a forum for IE.

Problem with text frame dropshadow not completely printing to pdf file.

Hi and thanks for your speedy replies!
I am editing a file that had altered corner text frames with a .25 inset and a drop shadow added, .05 stroke and paper swatch. When I deleted text everything shifted so I had to recreate the special frames on select pages. These new text frames are not showing the top and left sides of the frames when saved to pdf file. The right and bottom drop shadow are showing. What am I missing?
Cheers!

I am using the latest version in CC. I tried several exports directly from ID, PDF/X-3:2002, PDF/X-1a:2001 and the low res setting, all with no changes. None showed the left or top border on the frames in question.
So I was getting the first screen shot instead of the second which other similarly formatted frames showed. I checked every setting I could find and they were all the same. The problem just occurred after the point in the doc that I had made changes resulting in some pages being deleted and the page formatting being thrown off which I corrected with the appropriate saved page formats. But when I went to set up the frame dropshadow and accompanying stroke and swatches, the outline just would not show in the pdf although it appeared to be showing in ID.
I've since discovered a work around for the editing so no pages were deleted, but I need to figure out why this happened and what I am not seeing. Perhaps a setting to show the border? Or maybe it is some overall setting that I need to be looking for? Just weird, weird, weird...

From PSD to Illustrator to PRINT READY PDF getting blurry

Hello Experts,
I got a problem about converting my illustrator file to print ready pdf's. Basically i did my design in Illustrator but some of the graphic elements in my design are in PSD format, i just imported it to illustrator using place command and even embedded it to the main illustrator file, I got not problem with the resolution 'coz i set it to 300dpi CYMK. But the problem occurs when i print it to PDF because those images from psd file i imported are getting blurry, no matter how i set the settings to its maximum i still got those result over and over again. If anyone got a solution to this problem it might a good help to anyone not only me who is experiencing this problem.
Thanks,
erick

Thanks Mylenium, i finally figured it out now how to tweak those blurry stuff. First i tried to set the bicubic downsampling to its maximum pixels per inch and secondly i set the bicubic downsampling off, both settings just works fine. Thanks again. This is a great help.

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

Problems with saving edited photos using Photoshop Elements 5.0 on WIndows 8.

Since a week I can not save the edited photos - when I try the communicate: "Caould not complete your request because of a program error" appeares. I had no problem with saving edited photos before, with the same software. My computer runs on Windows 8, 64 bit version. My Photoshop Elements is version 5.0. Where is the problem?

W dniu 2013-06-16 15:36, dj_paige pisze:
>
Yes, I did it long ago.

Hp3050 says problem with the tricolour cartridge but wont print on black either

my hp 3050 j610 printer says problem with the tri colour cartridge justried printing in black but just sends out a blank sheet

Hi @kennym29,
Welcome to the HP Forums!
I understand that your HP 3050 will not print in black and says you have a problem with your tricolor cartridge. I am sorry to hear this, but happy to help!
I would recommend the following guides:
'Incompatible Print Cartridge' or 'Print Cartridge Problem' Message Displays on the Computer or Prin....
Fixing Print Quality Problems for the HP Deskjet 3050 (J610) All-in-One Printer Series.
Hope these guides are helpful, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I have a problem with downloading Indesign CS 6 part 1 (Mac) , it always stop downloading at 6.8MB !!!

As the title has stated, I have a problem with downloading Indesign CS 6 part 1(Mac) , it always stop downloading at 6.8MB (out of 1.2GB). I tried restarting my mac, using different browser but it is always the same result... Any help???

Try it from this site
Download Adobe CS6 Trials: Direct Links (no Assistant or Manager) | ProDesignTools

Problem with "Saved with Id" in Reports

Hi Group,
I am having problem with "Saved with id" functionality.
1.) I created a Query in sq01 as "query1".
2.) Copied the source code of this query into a z program
ztest_query.
3.) Now executed the report "ztest_query" in background with "Saved with Id" checkbox checked and id as "1234".
4.) Now where/how can I search for this id "1234" to retrieve my list.
5.) Normally if I dont change the report name and use the program aq*query1 which is self generated one, this works and I am able to retrieve the saved list from Transaction
SQ01.
Please let me know how this can be achieved.
Regards
Ankur Bhandari

Ankur,
Did you find a solution for this problem. Not many seem to be using this "Save list to id" functionality.
Thanks
Vyas

I am having problems with the InDesign it won't download it keeps saying extract when its about 30% then it says failed. How can i get it to download all the way?

I am having problems with the InDesign it won't download it keeps saying extract when its about 30% then it says failed. How can i get it to download all the way?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Problems with saving a file

Hello,
Im having problems with saving files on my computer, from Mail and Safari. I have 900gb free diskspace, but i simply cant save anyhow, it says my disk is full.
Have i accidentally locked something up?
Regards,
Niclas

Run disk utility on your hard drive to repair your permissions. http://support.apple.com/kb/HT1452

Problems with Saved Watermarks - Wrong Font Size

Hi,
I am having problems with "Saved" Watermarks, as when I selected them they have the wrong font size.
I created a Watermark (Draft) to be placed on the lower right
corner of a PDF, using font Arial-10. This watermark has been save using the "Save Settings..." in Watermarks.
When I add this this "saved" watermark to a new PDF, the font size is wrong
(much much bigger), even though the Add Watermark windows reports Arial-10. Only by a selecting a different font size and changing it back to the saved font size (10) I get the correct Font Size in the PDF.
I had a similar problem with the placement, but managed to solve that by setting the Preference>User&Guide to the used Unit (Page&Ruler = centimeters). But for the font size I can't find anything in the preference.
Any Help or Suggestions ?

Hi,
Sorry forgot to add, I am using
Acrobat Professional 8.1.2 on Windows XP Prof.
Cheers
Johannes

Error, problem with saving documents, Illustrator

I have a problem with saving documents in Adobe Illustrator (CS6): when I import to my document some jpg, tiff etc (even it isn't huge) Illustrator is crashed ("program to stop working correctly because of a problem. Windows will close the program and notify you if there is a solution available."). Next: program close.
But when I work only with objects from AI - everything is ok - any error, I can save it.
I have reinstalled and updated AI. And nothing changed.
What is a problem?

<moved from Downloading, Installing, Setting Up to Illustrator>

I am trying to create a print ready PDF from a word file with unacceptable results.

I am trying to create a print ready PDF from a word file with unacceptable results.
The word file has a trim size of 6” x 9”. It has been set to mirror margins with the inner, top and bottom margins set to 0.75”, the outer margin is set to 0.5” and the gutter to 0.14”.
It doesn’t matter if I create the PDF from inside Word, or open Acrobat Pro 11.0.9 and click Create From File, while the resulting document size is correct and the odd numbered pages reflect the correct margins, the even numbered pages do not. This results in some text near the outer margin, as well as the page numbers being omitted.
Does anyone know how to correct this?
I just noticed that some of the odd numbered pages' text is also cropped. Apparently Acrobat is refusing to set side margins to smaller than 1" (@ 3cm).

I'm away from my printer, so I'll try it later. Even so, the proposed test is irrelevant. I operate a small publishing house and am trying to upload certain novels to Ingram, the largest book distributor in the world. The specifications I've set are the specifications they've asked for. Since they've said that the results I'm obtaining are unacceptable, and since they demand submission in PDF form, this renders Acrobat Pro for Mac completely unacceptable for anyone in the publication industry. As far as I can tell, Adobe has a serious bug here that it needs to fix—and at once.

Problem with saving InDesign newsletter to a print ready PDF in CS6

Similar Messages

Maybe you are looking for