Problem with saving & publishing

I can't do anything.

Hi,
Please make sure the TREX processes are up and running. Restarting TREX may help you.
Regards,
Masa

Similar Messages

  • Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

    Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

    More information about this issue can be found here:
    https://forums.adobe.com/thread/1672655
    A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
    Then download each of the individual updates and run them sequentially. 
    I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
    You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
    http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
    Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
    Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
    Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
    Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
    Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
    Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
    Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
    Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
    Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

  • Problems with saving edited photos using Photoshop Elements 5.0 on WIndows 8.

    Since a week I can not save the edited photos - when I try the communicate: "Caould not complete your request because of a program error" appeares. I had no problem with saving edited photos before, with the same software. My computer runs on Windows 8, 64 bit version. My Photoshop Elements is version 5.0. Where is the problem?

    W dniu 2013-06-16 15:36, dj_paige pisze:
    >
    Yes, I did it long ago.

  • Problem with "Saved with Id" in Reports

    Hi Group,
    I am having problem with "Saved with id" functionality.
    1.) I created a Query in sq01 as "query1".
    2.) Copied the source code of this query into a z program
    ztest_query.
    3.) Now executed the report "ztest_query" in background with "Saved with Id" checkbox checked and id as "1234".
    4.) Now where/how can I search for this id "1234" to retrieve my list.
    5.) Normally if I dont change the report name and use the program aq*query1 which is self generated one, this works and I am able to retrieve the saved list from Transaction
    SQ01.
    Please let me know how this can be achieved.
    Regards
    Ankur Bhandari

    Ankur,
    Did you find a solution for this problem. Not many seem to be using this "Save list to id" functionality.
    Thanks
    Vyas

  • Problems with saving a file

    Hello,
    Im having problems with saving files on my computer, from Mail and Safari. I have 900gb free diskspace, but i simply cant save anyhow, it says my disk is full.
    Have i accidentally locked something up?
    Regards,
    Niclas

    Run disk utility on your hard drive to repair your permissions.  http://support.apple.com/kb/HT1452

  • Problems with Saved Watermarks - Wrong Font Size

    Hi,
    I am having problems with "Saved" Watermarks, as when I selected them they have the wrong font size.
    I created a Watermark (Draft) to be placed on the lower right
    corner of a PDF, using font Arial-10. This watermark has been save using the "Save Settings..." in Watermarks.
    When I add this this "saved" watermark to a new PDF, the font size is wrong
    (much much bigger), even though the Add Watermark windows reports Arial-10. Only by a selecting a different font size and changing it back to the saved font size (10) I get the correct Font Size in the PDF.
    I had a similar problem with the placement, but managed to solve that by setting the Preference>User&Guide to the used Unit (Page&Ruler = centimeters). But for the font size I can't find anything in the preference.
    Any Help or Suggestions ?

    Hi,
    Sorry forgot to add, I am using
    Acrobat Professional 8.1.2 on Windows XP Prof.
    Cheers
    Johannes

  • Error, problem with saving documents, Illustrator

    I have a problem with saving documents in Adobe Illustrator (CS6): when I import to my document some jpg, tiff etc (even it isn't huge) Illustrator is crashed ("program to stop working correctly because of a problem. Windows will close the program and notify you if there is a solution available."). Next: program close.
    But when I work only with objects from AI - everything is ok - any error, I can save it.
    I have reinstalled and updated AI. And nothing changed.
    What is a problem?

    <moved from Downloading, Installing, Setting Up to Illustrator>

  • Problem with AUTO PUBLISH nd update NEW POLICY to Client .

    To : who may concern , which really need urgent help .
    after few days of setting up the ZESM , but then i was unable to find is there any setting which can "AUTO PUBLISH " into the Client side . Without the Client need to use the manual "UPDATE POLICY " button ?
    Because , we find it that to make it silent update without the CLIENT side need to manually click the UPDATE POLICY , so i would wonder is there any way to have the AUTO UPDATE the policy from SERVER side ?
    thank alot first .
    From : NX ( which this few days has been keep on try and explore the ZESM 3.5 , 4.0 , 4.1IR )
    Which really need help in here , due to we are almost to the end of the setup server and the IT infrastructure .

    I would recommend that you READ and UNDERSTAND the Installation and Administration guides from the Documentation (somebody took the job to write those, so be kind enough to read it)
    Main Doc
    http://www.novell.com/documentation/zesm41/
    Your question is answered here:
    http://www.novell.com/documentation/...a/bnk7bdx.html
    See "Update Interval".
    Lastly, this is a public support forum, served on a best-effort basis from the community. As such, there's no guarantee that you'll get an answer, and if you get one, that works and is correct. So, if you have un urgent or important issue, go ahead an open a support ticket with Novell Technical Services in order to be served by professional support engineers backed up by the engineers who wrote the code.
    http://support.novell.com/contact/
    >>>
    From: nxgame<[email protected]>
    To:novell.support.zenworks.endpoint-security-management
    Date: 12/11/2010 3:06 pm
    Subject: problem with AUTO PUBLISH nd update NEW POLICY to Client .
    To : who may concern , which really need urgent help .
    after few days of setting up the ZESM , but then i was unable to find
    is there any setting which can "AUTO PUBLISH " into the Client side .
    Without the Client need to use the manual "UPDATE POLICY " button ?
    Because , we find it that to make it silent update without the CLIENT
    side need to manually click the UPDATE POLICY , so i would wonder is
    there any way to have the AUTO UPDATE the policy from SERVER side ?
    thank alot first .
    From : NX ( which this few days has been keep on try and explore the
    ZESM 3.5 , 4.0 , 4.1IR )
    Which really need help in here , due to we are almost to the
    end of the setup server and the IT infrastructure .
    nxgame
    nxgame's Profile: http://forums.novell.com/member.php?userid=99703
    View this thread: http://forums.novell.com/showthread.php?t=427947

  • Problem with iWeb publishing to IE

    Hello, I am experiencing a problem with iWeb '08 publishing content to Internet Explorer. The images and web pages look fine in Safari and in Firefox, but a lot of the web page images are mirrored in IE, covering up large parts of the text. Please don't tell me I have to spend $79.00 on upgrading to iLife '09. I just upgraded my iWorks to '09, but would upgrading to '09 in this instance even be the answer? Please advise. I fear that I will alienating any of my IE web surfers. Any help and advice would be greatly appreciated. Thank you.

    Hello and welcome to the board.
    IE is a terrible browser to render pages made with IWeb (I'm not sure upgrading to ILife 09 will fix your problem).
    I decided to somewhat "alienate" my IE visitor by putting a message on my home page that recommend them to use a compatible browser. Check my page (using IE here: http://www.wesdotphotography.com/Home.html) and look at the message. Also if you use any other browser you will not see my message and will experience a better browsing. It is not the fault of IWeb but more like Microsoft not writing a proper browser. a lot of people will confirm my say.
    Search this forum and you will see a lot of complaints about IE.
    Good luck
    Thierry
    PS: post you website so we can take a look.
    +Disclaimer: I may receive compensation via Google ads if you visit my website.+

  • Problems with saving decimal data

    Hello!
    I was faced with problem during saving decimal data via Excel input schedules. We use BPC 7.0 MS, SQL Server 2008.
    One of the main customer demands is using decimal comma (",") due to Russian regional settings and standards. We've switched server regional options and one of the client machine's regional options into Russian, all integer data is sent to SQL correctly but during saving decimal data we got error - Type mismatch.
    Do you mind how to solve this issue? Or it is possible only using English standarts?
    Thanks for your help.
    Regards, Maksim.

    Hi Maksim,
    To understand if you have set correct regional settings for you SAP BPC server you have to check the follow keys:
    HKEY_USERS\.Default\Control Panel \ International
    HKEY_USERS\S-1-5-18\Control Panel \ International
    HKEY_USERS\S-1-5-19\Control Panel \ International
    HKEY_USERS\S-1-5-20\Control Panel \ International
    HKEY_USERS\S-1-5-21\Control Panel \ International
    HKEY_USERS\S-1-5-21.....\Control Panel \ International
    should have all the keys for English US.
    Kind Regards
    Sorin Radulescu

  • Problem with saving pdf files to Mac

    Hi All
    I'm having a problem with pdf files.  When I get sent a pdf fielder email I can open it with no problems but I cannot seem to save it successfully to my Mac. I've tried opening file and doing a 'save as', copy and pasting and dragging and dropping but I keep getting the following message
    Adobe Reader could not open 'filename.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
    Any ideas how I sort this out?

    Can you use your email client's Save Attachments feature to save the file?

  • Lightroom 4.1 problems with book publishing at Blurb

    I've done a travel book using the Lightroom 4.1 bookmaking function with Blurb.  This has been a major headache.  The book is large landscape (13 X 11 inches) with a hardcover image wrap.  It is 124 pages on Proline Pearl Photo paper.  There are 412 images.  Once the book was created I took the time to resize all images to their use in the book to keep the book file to Blurb under the 2 geg limit.  It turned out to be 1.1 geg.
    I created  the book in Lightroom without too much trouble.  Replacing each image with the smaller duplicate was a pain.  Unfortunately Blurb can't deal with my Lightroom 4.1 book file.  They've spent a significant amount of time trying to figure out the problem with this book file. With the book completed I tried to upload multiple times.  The images and pages uploaded ok.  It would then stall out and give a server communication error after 3 or 4 hours had passed. There are evidently some problems with Blurb and Norton, so I turned that off, with no success. I exported the book as a pdf file, trying to get around the server upload issues.  Unfortunately the only choice of pdf version in Lightroom is 1.6.  Blurb only works with X-3, so that did not work.
    After extensive discussions with Blurb individuals I exported the book as a catalog.  This was sent with the images and the .lrcat file to Blurb's drop box. 
    The information below is their email back to me after Blurb worked with the Lightroom book file.
    "Thanks for your patience.
    I was able to open your book project without any issues in Lightroom - unfortunately, I wasn't able to upload it to your account or even export it as a PDF or JPG. As a matter of fact, you had more success with it, as the files never even went through the render process for me. To troubleshoot this, I tried the following:
    - deleting the cover images/text and choosing a new cover layout.
    - deleting the first half of the book project.
    - deleting the second of the book project.
    - deleting all pages of the book, added 20 blank pages, removed the cover image.
    - renaming the project.
    - duplicating the project, then renaming it.
    After each of these, I tried exporting to PDF and uploading to Blurb, but I had no luck. Unfortunately, it seems that your Lightroom book project may have some sort of corruption in it and that your best bet is to contact Lightroom support directly from the link below. They should have more detailed information on helping you with this problem, as Blurb only handles the actual printing of your file.
    http://www.adobe.com/support/imaging/supportinfo/
    I'd be interested in hearing what you find out.
    I apologize again for the inconvenience."
    I appears to me at this point that using Lightroom 4.1 for book production is a lost cause, and it appears to be a Lightroom problem.  Do others have these issues also.  My plan now is to manually redo the book with the resized images using Blurb's own software.  This has been an painful education and my one major disappoinment with Lightroom.
    --Gerry

    Just got off Adobe Live Chat.  A quick summary is contact Blurb.  How is that for a run around.  This is a major disappointment with Adobe  support.

  • Problem with saving a new document

    hey i just wrote a new document and when i try to save it, it says "the file 'untitled' can not be opened because it has been deleted" which is really confusing me because i am not trying to save it as untitle nor am i trying to open anything.
    Thanks

    Welcome to Apple Discussions
    This is a problem with no specific cause. It usually is fixed by using Disk Utility to repair permissions and deleting the AppleWorks 6 preferences. See my user tip, AppleWorks has stopped working correctly, for more on the preferences.

  • Problems with saving in Illustrator CS3 - Windows

    I'm using Illustrator CS3, Windows XP. Even the smallest files take a very long time to save. I try to save and it initally appears as if nothing is happening. If I click again, a portion of my screen goes white and the hour glass sits for what feels like forever while "Not responding" appears next to Illustrator in the bar. Eventually it finishes. Have run into the same problem with PhotoShop a couple times as well. Seems to have started after my upgrade to CS3. Can anyone help?

    "it initally appears as if nothing is happening" - no-no, disk indicator should be bright and nearly no-blinking!
    Solutions are (depending on the problem severity):
    1. Make more layers (even for the same kind of objects, especially for texts)
    2. Use RAID 5 disks for scratch files (VelocyRaptor is the best choice)
    3. Use i-RAM for scratch files (if the project not too big)
    4. Use RIndMA disk (http://hardwareforall.com/ww/serverRAMdisk.html) for scratch files

  • Problems with saving Word 2007 table as PDF

    I have a table in MS Word 2007 with some merged cells. If I use the Save as ... PDF or XPS option in Word 2007 to save this document as a PDF, the resulting PDF has a table with a discontinuous table grid. The table lines around the cells are broken.
    Is this a problem with the Word table or does the Save as PDF command not work well with tables.
    Thanks,
    Karl Smith

    What versions of both programs and how did you create the PDF? Can you post an example of the PDF?

Maybe you are looking for