Problem with saving secondary corrections...possible bug??
Alright, when working in color on the secondaries, I save the look that I want in the secondaries room. That's all fine and good. However, if I make any more changes, then hit save again, it will SOMETIMES overwrite the previous correction, and I would have to hit the save button again to get a new saved thumbnail. This doesn't happen in the grade save window as I always get a new saved grade. Is this normal or a possible glitch? Can anyone else confirm this happening?
this is something that has always been the case when you save anything. Primary Room, Secondary Room, Grade Bin and Still Store. Basically what is happening is when you click on a still or a grade that grades name pops up in the file box so if you hit save you are saving something with the same name and writing over the old with the new. So by deleting the name in the box or entering a new name you will not be replacing your original grade. Yes a tedious extra step, but it will solve the problem.
Similar Messages
-
Problems with Saved Watermarks - Wrong Font Size
Hi,
I am having problems with "Saved" Watermarks, as when I selected them they have the wrong font size.
I created a Watermark (Draft) to be placed on the lower right
corner of a PDF, using font Arial-10. This watermark has been save using the "Save Settings..." in Watermarks.
When I add this this "saved" watermark to a new PDF, the font size is wrong
(much much bigger), even though the Add Watermark windows reports Arial-10. Only by a selecting a different font size and changing it back to the saved font size (10) I get the correct Font Size in the PDF.
I had a similar problem with the placement, but managed to solve that by setting the Preference>User&Guide to the used Unit (Page&Ruler = centimeters). But for the font size I can't find anything in the preference.
Any Help or Suggestions ?Hi,
Sorry forgot to add, I am using
Acrobat Professional 8.1.2 on Windows XP Prof.
Cheers
Johannes -
Error, problem with saving documents, Illustrator
I have a problem with saving documents in Adobe Illustrator (CS6): when I import to my document some jpg, tiff etc (even it isn't huge) Illustrator is crashed ("program to stop working correctly because of a problem. Windows will close the program and notify you if there is a solution available."). Next: program close.
But when I work only with objects from AI - everything is ok - any error, I can save it.
I have reinstalled and updated AI. And nothing changed.
What is a problem?<moved from Downloading, Installing, Setting Up to Illustrator>
-
Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.
More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages AdbeRdrSecUpd11008.msp -
Problems with saving edited photos using Photoshop Elements 5.0 on WIndows 8.
Since a week I can not save the edited photos - when I try the communicate: "Caould not complete your request because of a program error" appeares. I had no problem with saving edited photos before, with the same software. My computer runs on Windows 8, 64 bit version. My Photoshop Elements is version 5.0. Where is the problem?
W dniu 2013-06-16 15:36, dj_paige pisze:
>
Yes, I did it long ago. -
Problem with "Saved with Id" in Reports
Hi Group,
I am having problem with "Saved with id" functionality.
1.) I created a Query in sq01 as "query1".
2.) Copied the source code of this query into a z program
ztest_query.
3.) Now executed the report "ztest_query" in background with "Saved with Id" checkbox checked and id as "1234".
4.) Now where/how can I search for this id "1234" to retrieve my list.
5.) Normally if I dont change the report name and use the program aq*query1 which is self generated one, this works and I am able to retrieve the saved list from Transaction
SQ01.
Please let me know how this can be achieved.
Regards
Ankur BhandariAnkur,
Did you find a solution for this problem. Not many seem to be using this "Save list to id" functionality.
Thanks
Vyas -
Problems with the secondary click after updating to 10.7.4
Hi there,
since my update to 10.7.4 on my MacBook Air I have a problem with the secondary click. I configured it to "click on right side", but some times and espacially after wake-up my MBA the secondary click is not working. So I have to switch to the System Preferences and remove the hook at secondary click and set it again. Than everything is working again.
Has some one the same problem or even know how to solve this?
ThanksI have had the issue with a Snow Leopard but never with Lion.
Can you go to System Preferences>Displays>Color and select your profile.
I had made 3 profiles and they are all still there and my iMac is still using the same one I previously selected -
Hello,
Im having problems with saving files on my computer, from Mail and Safari. I have 900gb free diskspace, but i simply cant save anyhow, it says my disk is full.
Have i accidentally locked something up?
Regards,
NiclasRun disk utility on your hard drive to repair your permissions. http://support.apple.com/kb/HT1452
-
Problems with saving decimal data
Hello!
I was faced with problem during saving decimal data via Excel input schedules. We use BPC 7.0 MS, SQL Server 2008.
One of the main customer demands is using decimal comma (",") due to Russian regional settings and standards. We've switched server regional options and one of the client machine's regional options into Russian, all integer data is sent to SQL correctly but during saving decimal data we got error - Type mismatch.
Do you mind how to solve this issue? Or it is possible only using English standarts?
Thanks for your help.
Regards, Maksim.Hi Maksim,
To understand if you have set correct regional settings for you SAP BPC server you have to check the follow keys:
HKEY_USERS\.Default\Control Panel \ International
HKEY_USERS\S-1-5-18\Control Panel \ International
HKEY_USERS\S-1-5-19\Control Panel \ International
HKEY_USERS\S-1-5-20\Control Panel \ International
HKEY_USERS\S-1-5-21\Control Panel \ International
HKEY_USERS\S-1-5-21.....\Control Panel \ International
should have all the keys for English US.
Kind Regards
Sorin Radulescu -
LR4 Beta...another problem with using Lens Correction
Not sure if it's me or the beta. I'm trying to do a lens correction on a file that was edited in CS5. The photos were taken in 2009/10. They are importing as Process 2012.
I'm using the Lens Correction in manual. About 15 seconds after I start using the sliders, my LR stops working and I have to close the program (white outs the screen with the note saying the program has to be closed).
I do know there can be problems with a beat so I wanted to post this problem in case it is a bug in the system.I have the same probem if I try to push the scale slider down below about 87%. It is quite annoying when it keeps happening on the same photo. It's not something I use a lot but it can be necessary with tall buildings when the correction pushes the top out of the frame.
JW -
Problem with saving pdf files to Mac
Hi All
I'm having a problem with pdf files. When I get sent a pdf fielder email I can open it with no problems but I cannot seem to save it successfully to my Mac. I've tried opening file and doing a 'save as', copy and pasting and dragging and dropping but I keep getting the following message
Adobe Reader could not open 'filename.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
Any ideas how I sort this out?Can you use your email client's Save Attachments feature to save the file?
-
Problem with saving a new document
hey i just wrote a new document and when i try to save it, it says "the file 'untitled' can not be opened because it has been deleted" which is really confusing me because i am not trying to save it as untitle nor am i trying to open anything.
ThanksWelcome to Apple Discussions
This is a problem with no specific cause. It usually is fixed by using Disk Utility to repair permissions and deleting the AppleWorks 6 preferences. See my user tip, AppleWorks has stopped working correctly, for more on the preferences. -
Problems with saving in Illustrator CS3 - Windows
I'm using Illustrator CS3, Windows XP. Even the smallest files take a very long time to save. I try to save and it initally appears as if nothing is happening. If I click again, a portion of my screen goes white and the hour glass sits for what feels like forever while "Not responding" appears next to Illustrator in the bar. Eventually it finishes. Have run into the same problem with PhotoShop a couple times as well. Seems to have started after my upgrade to CS3. Can anyone help?
"it initally appears as if nothing is happening" - no-no, disk indicator should be bright and nearly no-blinking!
Solutions are (depending on the problem severity):
1. Make more layers (even for the same kind of objects, especially for texts)
2. Use RAID 5 disks for scratch files (VelocyRaptor is the best choice)
3. Use i-RAM for scratch files (if the project not too big)
4. Use RIndMA disk (http://hardwareforall.com/ww/serverRAMdisk.html) for scratch files -
Problem with playback distortion. Possible latency buffer issue?
I have noticed a few other posts in the same vain as this but with no clear answers so here is my take on the problem:
I am experiencing a distorted slowed down playback through logic pro 8 only occasionally which can only be fixed wit a full system restart. It sounds very much like a latency/buffer issue but to be honest I am not too great at fixing this myself. I have tried to change the buffer size to no avail. Recording seems to be fine mostly but it is just on playback. Although today i did experience the same sound issues when recording.
I am using a brand new macbook 2.4 ghz with a behringer xenix 1622 mixing desk and a usb audio device. I have only just switched to a mac and have recorded before on my pc with the same desk and interface for over 2 years without a problem, so I am positive it is not the external hardware that is at fault.
I am getting exactly the same problem when I use Garageband.
Is it just the apple products which do this?
Is this a common problem with an easy fix?
I just dont know to be honest with you, i dont pretend to be an expert in the field, it is infuriating.
Is there a problem with my machine? If so I can change it no problem.
Please if anyone knows how I can sort this please let me know.
I am gutted because I bought a mac thinking they were designed for music production, i dont want a pc again!
Thanks.Can you be more specific on your usb device; Make & model... USB2? Visit the manufacturer's website, check compatibility & make sure you've got the latest driver. If you haven't already, run "Software Update" (under the Apple logo in the top left of your screen) & download the updates... this will take a while, so go & get yourself a coffee! Make sure you turn Airport off when you want to use Logic.
If you're still having prob's check out this link;
http://docs.info.apple.com/article.html?artnum=304970
It's written for Logic 7, but most of it's in the same place.
Hope this helps.
Cheers... -
Problems with saving Word 2007 table as PDF
I have a table in MS Word 2007 with some merged cells. If I use the Save as ... PDF or XPS option in Word 2007 to save this document as a PDF, the resulting PDF has a table with a discontinuous table grid. The table lines around the cells are broken.
Is this a problem with the Word table or does the Save as PDF command not work well with tables.
Thanks,
Karl SmithWhat versions of both programs and how did you create the PDF? Can you post an example of the PDF?
Maybe you are looking for
-
Report launchpad is not working under MSS
Hi, We are configuring MSS and now the report launchpad is showing errors like Role: MSS instance: REP NOT_FOUND. I know we need to configure the MDT scenario and then change the iView property. But I could not find the documentation on which propert
-
HP scanner no longer working with Mac?
My HP C4680 scanner/printer used to work with my Mac. The printer still works fine, but after upgrading to Mac OS X 10.6.8 the scanner is no longer working. I receive a message - scanner not found. Anyone know how to fix this to make the compatibl
-
I am a 20 year Mac user. I downloaded a book from iTunes moments ago. in iTunes, under the left hand margin "Books" when I select the book and double click on it, it doesn't open. How do I read this book? It won't give me an option to open with o
-
How to compare two files in Java & uncommon text should print in Diff text
Hi All, can any one help me to write a java program.. How to compare two files in Java & uncommon text should print in Diff text file.. Thanks Sam
-
Organizational Management Plan Version Lock
While planning personell costs we use several plan versions in addition to our active version 01. We would like to block or lock access to the plan versions once our budget is complete. Does anyone have any ideas on locking OM versions? Thanks for th