Problem with SB Live! Value & Dell 8

I recently reinstalled a fresh copy of XP on my Dell 8200 PC. When I start the PC, the SB Li've! Value card isn't "enabled". I have to go into Device Manager to "enable" it so I have sound. What needs to be done to correct his annoying problem? Thanks.

Suggestions anyone?

Similar Messages

  • Iphone 3GS - windows 7 - syncing problems with windows live mail

    I brought a new iphone 3gs last week and tried to sync it with my new dell PC running windows 7 (with windows live mail).
    It wouldnt sync, so I read the forums and reset the sync history through itunes.
    This worked, and synced my iphone to the computer. It appears to have backed up all my contacts on the iphone to somewhere on the PC (cant find where) but it hasnt copied the contacts from windows live mail to the iphone
    Have I confused anyone??

    have you tried using imap instead?
    if you can access your email from the web page then sounds more like a problem with windows live mail and not your BT account
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Problems with Windows Live Mail send/recieve after upgrading Firefox

    I recently upgraded Firefox and since then I get this:
    An unknown error has occurred.
    Server: 'smtp.frontier.com'
    Windows Live Mail Error ID: 0x80070057
    Protocol: SMTP
    Port: 25
    Secure(SSL): No

    have you tried using imap instead?
    if you can access your email from the web page then sounds more like a problem with windows live mail and not your BT account
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Problems with SB Live Dell Version for the Dimension 8200

    I recently spent almost 6 hours looking in and out of forums looking for a driver because none of the ones supplied on dell were working
    The one I found was a modded driver, which installed perfectly, my sound icon on the toolbar finally displayed volume, whereas before, it didn't detect my sound card at all.
    But my problem now is that it is not outputting any sound to my speakers!
    Any help is appreciated

    I have the same problem with the SB li've 5. surround card. My computer installs the SB li've game port but not the multimedia - audiocontroller.
    It's a oem card can anyone help me what to do because no I don't have any sound at all .
    Greetings Chrizzzzz

  • .MSG files. Problem with getting requested values from crawled properites

    Hi
    I have a lot of msg files on my file server. I use SharePoint Enterprise Serach engine to crawl all these MSGs.
    I would like to get extra managed properties out of these files. I am most interested in getting Mail:5(text) / Mail:12(Date and Time) / Mail:53(Date and Time) from MAIL category in Managed Properties.
    This thread is very similar to one already posted by SpinnerUp:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/82d69df0-5cb2-4e51-a485-34209e111f4b/problem-with-crawling-msg-files-doesnt-seem-to-return-requested-values-from-crawled-property
    Please be aware that I do not use Public Folders. These MSGs are exproted from Outlook and are stored on File Server not Exchange.
    I tried to link Crawled Properties to new property however I cannot get any results back.
    Thank you for you help.
    Regards, Marcin (Please mark as helpful or answered if it helps)

    Thank you for your replay.
    However I am not keen to write custom connector at this stage.
    Is it possible to simply get "Subject", "Sent", "Received" info from msg file and then map it to managed properties.
    Does SharePoint create any crawled properties which contain information about let's say "Subject" which then can be used to create managed properties?
    I tried playing with "MAIL" properties however I cannot get them to work. I guess this is because the file is a msg file rather than mail which is stored in Exchange Public Folder.
    Regards, Marcin (Please mark as helpful or answered if it helps)

  • Problem with mouse-over value on a column chart (by Series)

    Hi.
    First of all thanks for any offered tip.
    I am having a problem with a column chart.
    When I move the mouse over a column it should show a small pop-up (or tip) with the column name (series name) and the value (series value). The problem is that it displays an extra '1' just like the following:
    SeriesName
    1
    X.XXX
    How can I remove the extra '1' and only show the name and the value ?
    The data is populated by series (manually added).
    Mihai.

    Hi,
    Thanks for the tip Shanthakumar KA.
    Yes. It looks like the '1' is coming from the X Axis labels. The chart that I have built does not require any labels on the X Axis, so this was not set (X-Axis labels: Empty). I tried setting this to an empty cell, but the '1' still appears in the mouse-over tip.
    It is very weird. If I leave the X-Axis labels empty, I still get the '1' displayed which is very annoing.
    Are there any solutions for this except the re-building the tip with a label a.k.a. '[customize the mouse over values|http://xcelsiusandme.blogspot.com/2009/07/xm-sample-7-customizing-mouse-over.html].'
    Regards,
    Mihai.

  • Problems with SB live 5.1 digi

    for some time, I have has each start of my PC, echo in my speakers. the only way of making it leave is going in audio HQ parameters and to double click on "No effect"... how resolve this problems ?
    my second question is: I have a SOUND BLASTER li've 5. digital (non Dell) and all of drivers i can found are makes to the dell edition... where can i found drivers for my audio card?
    thank's for helping me... Message Edited by guizmo4 on 03-30-2005 2:20 AM

    I have the same problem with the SB li've 5. surround card. My computer installs the SB li've game port but not the multimedia - audiocontroller.
    It's a oem card can anyone help me what to do because no I don't have any sound at all .
    Greetings Chrizzzzz

  • Problem with getting actual value in Row row=iter.getCurrentRow();

    hi,
    the use case is as follows:
    in master-details, on detail table there are 2 columns with checkbox and username.
    when user clicks checks, the username text item is populated with current user value in respective row.
    <af:column sortProperty="#{bindings.DcaRegisterLinesV1.hints.Selected.name}" filterable="true"
    sortable="true" headerText="#{bindings.DcaRegisterLinesV1.hints.Selected.label}" id="c1"
    width="30">
    <af:selectBooleanCheckbox value="#{row.bindings.Selected.inputValue}"
    label="#{row.bindings.Selected.label}" autoSubmit="true"
    valueChangeListener="#{registerBean.socSelectedChangeListener}"
    shortDesc="#{bindings.DcaRegisterLinesV1.hints.Selected.tooltip}" id="sbc1">
    <!--af:setPropertyListener from="#{securityContext.userName}"
    to="#{bindings.ProcessedUser.inputValue}"
    type="attributeChange"/-->
    </af:selectBooleanCheckbox>
    </af:column>
    <af:column headerText="#{bindings.DcaRegisterLinesV1.hints.ProcessedUser.label}" id="c17" width="80"
    sortProperty="#{bindings.DcaRegisterLinesV1.hints.ProcessedUser.name}" filterable="true"
    sortable="true">
    <af:outputText value="#{row.ProcessedUser}" id="ot17"/>
    </af:column>
    the bean's code is below:
    public void socSelectedChangeListener(ValueChangeEvent valueChangeEvent) {
    BindingContainer dcbindings = getBindings();
    AttributeBinding at;
    DCBindingContainer dc=(DCBindingContainer) dcbindings;
    DCIteratorBinding iter=dc.findIteratorBinding("DcaRegisterLinesV1Iterator");
    BindingContext bindingctx = BindingContext.getCurrent();
    BindingContainer bindings = (BindingContainer)bindingctx.getCurrentBindingsEntry();
    Row row=iter.getCurrentRow();
    String AgreementId=row.getAttribute("AgreementId").toString();
    System.out.println(" AgreementId="+AgreementId);
    it always prints the first row's values.
    even though i click on different rows on the table prior clicking checkbox.
    what's wrong? seems like the model is not refreshed because what? autosubmit=true ?..
    how can i get the actual row values?
    please help
    the

    Hi,
    lets clean up your code first:
    public void socSelectedChangeListener(ValueChangeEvent valueChangeEvent) {
    BindingContainer dcbindings = getBindings();
    //AttributeBinding at;
    DCBindingContainer dc=(DCBindingContainer) dcbindings;
    DCIteratorBinding iter=dc.findIteratorBinding("DcaRegisterLinesV1Iterator");
    //BindingContext bindingctx = BindingContext.getCurrent();
    //BindingContainer bindings = (BindingContainer)bindingctx.getCurrentBindingsEntry();
    Row row=iter.getCurrentRow();
    String AgreementId=row.getAttribute("AgreementId").toString();
    System.out.println(" AgreementId="+AgreementId);No to the possible problem. Check if the table SelectListener is set. It should have an EL string that ends with ".makeCurrent". This however makes only sense for single row select cases.
    Frank

  • S/B Live Value Dell OEM CT4

    Calling all expertsI have a Sound Blaster Value Dell OEM? CT4780 card that I kept from my old Dell Dimension XPS T500. I?built a budget PC using an MSI? MS-6533XG mobo with P4. 2.8GHz Northwood 533 FSB.Using?XP Pro SP2? and Altec Lansing ADA880 speakers.
    The original Dell drivers?need replacing. The old Dell had an SPDIF feeding the Sub-Woofer. I no longer have the SPDIF source.Does any one know which drivers will get my sound up and running.

    Did you check dell's web site?

  • Problem with field-symbol values not updating

    H i ,
          I have following piece of code :
    Assigning Dynamic Table to Field Symbol
        ASSIGN ist_dyn_table->* TO <gs_dyn_table>.
    *   Creating Structure for dynamic table
        CREATE DATA gs_dyn_line LIKE LINE OF <gs_dyn_table>.
    *   Creating line type for the Dynamic Values
        ASSIGN gs_dyn_line->* TO <gs_line>.
    *   Populating values in the dynamic table
        LOOP AT ist_pwcl_main INTO wa_pwcl_main.
          ASSIGN COMPONENT gc_fld_werks OF STRUCTURE <gs_line> TO <gs_field>.
       1   IF sy-subrc EQ 0.
       2        <gs_field> = wa_pwcl_main-werks.
       3      ENDIF.
       5  IF <gs_field> IS ASSIGNED.
       6     <gs_field> = wa_pwcl_main-vbeln.
          ENDIF.
      7 IF <gs_field> IS ASSIGNED.
      8  <gs_field> =  wa_pwcl_main-posnr.
          ENDIF.
       IF <gs_field> IS ASSIGNED.
            <gs_field> = wa_pwcl_main-quant.
          ENDIF.
    on debugging  at line 2 <gs_filed> contains the value of werks .
    but at line 6 <gs_field> contains value of vbeln as 0 and at 8 of posnr as 0 .
    What can be the problem ? Other values are getting assigned properly .
    Plz help ...
    Regards .

    Hi,
    Assigning Dynamic Table to Field Symbol
        ASSIGN ist_dyn_table->* TO <gs_dyn_table>.
      Creating Structure for dynamic table
        CREATE DATA gs_dyn_line LIKE LINE OF <gs_dyn_table>.
      Creating line type for the Dynamic Values
        ASSIGN gs_dyn_line->* TO <gs_line>.
      Populating values in the dynamic table
        LOOP AT ist_pwcl_main INTO wa_pwcl_main.
          ASSIGN COMPONENT gc_fld_werks OF STRUCTURE <gs_line> TO <gs_field>.
       1   IF sy-subrc EQ 0.
       2        <gs_field> = wa_pwcl_main-werks.
       3      ENDIF.
       5  IF <gs_field> IS ASSIGNED.
       6     <gs_field> = wa_pwcl_main-vbeln.
          ENDIF.
      7 IF <gs_field> IS ASSIGNED.
      8  <gs_field> =  wa_pwcl_main-posnr.
          ENDIF.
       IF <gs_field> IS ASSIGNED.
            <gs_field> = wa_pwcl_main-quant.
          ENDIF.
    Based on your coding above, <gs_field> has been assigned with data type 'WERKS' (i'd assume component gc_fld_werks found from structure <gs_line> is a plant typed), which is a CHAR(4) data type.
    Meaning, if <gs_field> is assigned with Plant type value, e.g. <gs_field> = '1000', field symbol <gs_field> will contain 4 character only.
    At line 6, if wa_pwcl_main-vbeln = '0000201000', <gs_field> is only capturing '0000' only. This is also happened to line 8.
    However, it looks like that <gs_field> is getting over-write if ASSIGNED statement returns SY-SUBRC = 0.
    Hope this helps.
    Regards,
    Patrick

  • Scanning Problem with Mavericks, CS3, and Dell 2155cn

    New MB Pro running Mavericks.  Adobe CS3 loaded.  Acrobat Pro will print to network Dell 2155CN, but will not scan.  Same installation on older MBP running Lion scans from Acrobat with no problem.  Does Mavericks have a problem with the Dell driver?S

    Might be the driver. I don't see a Mavericks compatible driver > http://ftp.dell.com/Pages/Drivers/dell-2155cn-cdn.html
    It just says Mac OS X. That's rather vague.
    Try this workaround.
    Image Capture can scan for you. It's in your Applications folder.
    Mac Basics: Using a scanner

  • Problems with windows live mail

    Hi there,
    Today I received my blackberry 8520, but i've got one problem with my windows live mail account. I only receive the e-mails on my live account after i checked them on my computer.
    I did receive an announcement that when i use an e-mailclient, in my situation microsoft outlook, i have to change the settings of this client. If the client doesn't save my e-mails on the server, blackberry is unable to deliver them to my device.
    I unsterstand the problem but i can't solve it. Is there anybody who knows how to solve my problem?
    Many thanks,
    Chantal

    Hi and Welcome to the Forums!
    Outlook has settings that dictate what it does when you have it grab your email from the server. The location is variable depending on Outlook version...I can only give you the steps for my version (2K7). From within Outlook:
    Tools > Account Settings > select the account > Change > More Settings > Advanced
    On that screen, you must change the "Delivery" options so that the messages are left on the server for BIS to be able to retrieve them. BIS grabs email every 15 minutes. If you have Outlook running and have it grabbing email every 5 minutes AND have it (via this screen) removing the email from the server when it does so, then there will be nothing for BIS to grab when it makes its next scheduled attempt. You need to change these settings to something that allows BIS to have something to grab from the server when it tries.
    What to set these to is a function of your needs and your email providers policies. Typically, if you set Outlook to Leave messages on the server yet remove them after 1 day, you can stay within all needs and policies.
    Hope that helps!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Tecra S2: Problems with Linux Live CDs after BIOS upgrade

    Hi all,
    a short while ago I flashed the BIOS of my Tecra S2. My current BIOS version now is 2.80. Unfortunately no I have got problems with booting Linux Live CDs like Knoppix or Kanotix. The boot process freezes, when the PCMCIA module is tried bo be started.
    What i want to do now is to downgrade my BIOS version. Does anyone know how that stuff works and does anyone have an old BIOS version from 2005? I couldn`t found older versions on the Toshiba support sites.
    Thanks for all answers!
    biberkopf

    Youre right. On the Toshiba page you will find only the newest version of the BIOS and the older versions are not available on the page.
    In my opinion if you want to downgrade the BIOS you have to ask the authorized service provider in your country for the help.
    But did you check this useful site:
    http://newsletter.toshiba-tro.de/main/
    There you can check the area machine installation help
    It provides some useful tips with the device configuration

  • Problems with MBP late 2009 + Dell U2711 + DVI Dual-Link

    Hi!
    I'm new to Apple Communities. I've been using for quite a long time my MBP with my Dell U2711 monitor. Sometimes it works perfect. But other times, just after bootup or reasume the display doesn't work properly.
    Some times it doesn't detect the signal of the MBP and doesn't start.
    Other times it displays the right image but with something like "noise" in every color.
    The only solution I found is to turn off and on the display or if it doesn't start, forcing it touching the menu button to start up. If it appears noise and I just change the source and put it back again it works fine.
    It has only happened me with this computer. I have also used it with a custom made computer with a GTX280 and never had a problem with it.
    I tried to boot up with the 2 different graphics cards my MBP has, and with both I have the problem. I even had the problem using the "normal" DVI adapter. I suppose it must be something of the computer firmware. Some times, if I restart the computer using only the U2711 display. The bootup logo and loading is displayed fine. But when it displays the login window the noise starts.
    I've always had this problem. It isn't something that started happening one day. I even reinstalled Mac OS X.
    I'ts really strange and I found nobody who has the same problem. I hope someone has a solution.
    If someone doesn't understand what I call "noise", please, tell me and I will post a photo of it.
    Thanks in advance (and sorry for my English)

    Double posting. Everyone, ignore this here and follow that one instead.

  • Asset Transfer - problems with incorrect depreciation values/period

    Hi,
    I'm trying to do an asset transfer between two company codes with transaction ABT1N using the gross method.
    My problem is that when the asset is transferred the number of depreciation periods restart in the receiving company but with the net value from the sending company.
    Example:
    Company 1100:
    Asset 1:
    Aquired: january 2005
    Value: 10 000 $
    Depreciation time: 5 year x 12 months = 60 periods
    Transfer to company 1200 on july 2007...
    Depreciation in 1100 so far = 5 000 $
    Net value to be transferred to CoCode 1200: 5 000 $
    Here comes the problem, when I look at the depreciation time in company 1200 after the transfer, I see that the system now wants to depreciate the net value of 5 000 $ on another 60 periods period. This means that the asset will have a lifetime of 7,5 years in total instead of 5 years.
    What I want to do is that after the transfer the depreciation should only by the the number of periods that is left from the original depreciation start in company 1100. This means that after the transfer there should only be 30 depreciation periods left in company 1200 on the transferred asset.
    Thanks for response! I will add a lot of points to thoose that provides me with solution solving info.
    Best regards
    Carl-Johan

    Carl,
    This is where you can influence the fileds to be transfered in the transfer variant [1-Gross in your case].
    Asset Accounting>Transactions>Intercompany Asset Transfers>Automatic Intercompany Asset Transfers>Define Transfer Variants-->Specify Transfer of Fields (for New Asset in Target CoCd)
    Select the variant 1-Gross method and then click on the Depreciation area on the left bar. The system will display the all the Depreciation area for the Chart of Depr in question. Here for each depreciation area you can dictate what values from the old asset need to be trf to the new asset.
    In your case, the system is not transfering the remaining useful life. Precisely you need to transfer the field group 19-Expired useful life and 20-Expired life in periods.
    That should do the needful for you.
    Have a nice day.
    Vishal Thakur.

  • Problems with Xbox live & WRT120N.

    Post-script: I've already read just about every thread having to do with Xbox live. None helped me at all.
    Well, I just got a WRT120N router recently and I love it. It's fast, and the WiFi range is phenomenal.
    Bt, Xbox live doesn't work. I just CAN'T connect. Plain and simple. I get no error message or reason,
    just suggestions that don't work. I've probably reset my router/modem 20 times today. No joke.
    I've got one of those Wireless N Network adapters for my 360. With my old connection, I could connect.
    It was slow, and it sucked, but I could still connect. I don't know what the problem is. My laptop
    picks up the internet and I ALWAYS have a full connection anywhere in the house. The wired computers work great,
    What do I do? If there are any questions or suggestions for me, go on ahead. I'll do whatever it takes to get this working.

    Try this..
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    On the set-up tab change the MTU Size to 1365 and click Save Settings...Click on "Administration" tab and disable the option UPnP and click Save Settings...
    Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
    1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
    2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
    3)Click on the Status tab and take note of DNS1 and DNS2 Addresses...
    4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your XboxIP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
    5) Also assign the DNS Addresses on the Xbox
    Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
    6) Turn off your modem, router, and Xbox...Wait for a minute...
    7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

Maybe you are looking for