Problem with scheduling ECMA Ver1.1 in build 4.1.3496.0 and build 4.1.3479.0

I tried using powershell, vbscript, and c# calls and everytime the ecma is called, the ma run step finishes and never goes to the next run step.
Basically it never returns a run status to whatever calls the schedule and just hangs.
I have several ecmas and 2 of them behave this way, the others are packaged ecmas.
All other schedulng with the fim ma,adma's and the packaged ecmas work fine..
Any ideas? Im running out of them a I have tried rebuilding the ma's.. building packages, rebuilding wmi.. doing a rollup udare and nothing works.. This also occurs in dev.Any help is appreciated.
Thanks
Joe Stepongzi - Identity Management Consultant ilmXframework.codeplex.com

Exports will work if no pending exports.
Hi Joe :) - long time!
The above seems to me to be a clue - is it possible something is being instantiated/connection opened/etc. in your IMAExtensibleCallExport.ExportEntry call that is not being cleaned up? Have you tried debugging, or looking closely at the process monitor
to see what is different between when there IS and ISN'T any pending exports? Perhaps you could temporarily modify ExportEntry to basically do nothing, or write to a file - anything but what it is doing now - and see if the problem persists.
Bob Bradley (FIMBob @
TheFIMTeam.com) ... now using FIM Event Broker for just-in-time delivery of FIM 2010 policy via the sync engine, and continuous compliance for FIM

Similar Messages

Problem with scheduling planned orders in MRP

There is a problem with scheduling planned orders in MRP. SFG is assigned to the BOM of FG. No inhouse production time maintained in the material master of SFG & FG. routing maintained for both . In OPU5 scheduling & capacity reuiremnts tickmarked for detailed scheduling. Scheduling level - via detaied scheduling. Scheduling type - backward. Adjust basic dates , adjust dep. req. to order start set. In MD02 , scheduling is via ' lead time scheduling'.
My problem is the start date & time & finish date & time is same for planned orders of FG & SFG in the detailed scheduling tab of the planned orders. (Duration is same because of same capacity requirements on the same work centre. But how is the finish date same for both SFG & FG?)
(Capacity requirements are being generated.)
What could be the problem ?

Dear,
By scheduling the routing and maintain lot size dependent time in material is best practice and result of scheduling will be consistent.
If you want SFG before FG you need to define lead time offset in BOM or need to maintain the floats before production.
Hope clear to you.
Regards,
R.Brahmankar

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now som

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek Randall

I don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.

Hey, im experiencing problems with itunes. i downloaded the recent itunes update yesterday and today i plugged my iphone in and my computer said there was a trojan horse and now itunes wont open. Help please??

Hey guys, Im expierencing problems with itunes after the latest update yesterday(1/22) and the problem im having is when i plugged my iphone into my PC today a virus detection came up and said a trojan horse was present. I also cant open itunes at all. Im confused and dont know what to do. thanks in advance

Place the device in DFU mode (google it) and restore.

My iPod Touch 3rd Gen is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. Is this a common problem? Is there a fix?

My iPod Touch (3rd Gen) is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. It varies between not responding when I tap the screen and acting as if I double-tap or tap and hold when I tap. Every so often it freezes for a minute or so and then comes back. The scren is constantly changing sizes too such that I often can't see most of the top status bar or other edges. This makes typing almost impossible, ruins most games and generally makes everything difficult, but otherwise the iPod is working correctly. Powering off, shutting down apps, letting it sit have not worked. This has happened once before months ago, but the issue resolved itself somehow. Is this a common problem? Is there a fix?

Try this for the freezing
http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
Or if they don't work put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414

I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB

After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB
How can i do that?

What did you "put as slave?" What Mac model do you have, exactly?

There is a problem with adobe acrobat reader please exit adobe acrobat reader and try again 101:101

I'm trying to access some web PDF files via SharePoint Application but i got this error message "there is a problem with adobe acrobat reader please exit adobe acrobat reader and try again 101:101"
my operating system is Win 7 and I'm using Adobe Acrobat Pro 11.0

I'm having the same problem. Only I have Windows XP and at the end of the error message it shows 103.103. Please let me know if and when you get an answer or remedy to this problem. Thanks!

My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!

My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!

I think many of us need a Defense Against the Podcasts App professor.
Have you looked at this Apple support page?
http://support.apple.com/kb/HT6190?viewlocale=en_US&locale=en_US

I got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

i got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

Did you fix the problem? I have the same problem and it has been pain in the neck.

I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

Hello zukafu,
Welcome to the forums.
In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
Link: http://www.blackberry.com/btsc/KB03621
Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
Thank you
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Hi guys, I have a problem with imessage. My iphone 4S is factory unlocked and i have been using t-mobile carrier. i tried settings - messages - imessage on but there is this 'waiting for activation' thing. Does anyone know how to solve this? Thanks!

Hi guys, I have a problem with imessage. My iphone 4S is factory unlocked and i have been using t-mobile carrier. i tried settings - messages - imessage on but there is this 'waiting for activation' thing. Does anyone know how to solve this?
Thanks!

If you are in the UK:
Please upgrade your plan to Web n Walk plus. One of our users on T-Mobile UK had this to report back to us:
T-Mobile UK are in fact port blocking to ensure fair usage on their base Web and Walk Plan. I have upgraded to Web and Walk Plus and as a result the port blocks are lifted and I get a higher data allowance!
We were also recently contacted by T-Mobile UK, who stated the following:
Any smart phone (iphone, android etc) that is bought directly from T-Mobile should be automatically provisioned with Web n Walk plus, if customers have bought a handset sim free then they will need to call customer services and get this added. It is free of charge for most price plans (including new plans) but some older plans will generate a charge of £5pm for this.

Problems with current version of AIR. Won't load and also can't uninstall

I have recently purchased a new Mac and loaded the most recent version of AIR but now when I try to run it I keep getting the following message
This application requires a version of Adobe AIR which cannot be found.
Please download the latest version of the runtime from
http://www.adobe.com/go/getair,
or contact the application author for an updated version.
I am also getting this message when I try and run the uninstaller so I can I can try and re-install.
Does anyone have any suggestions?
Thanks.

I had AIR 3 on my MacBook Pro before I updated it to Lion. I use AIR 3 to run McMillan Study guides Master your CDCs. when I updated my mac to lion and tried to run the application the application couldn't find AIR 3 on my mac. So I uninstalled it and tried to install it again. when I tried to install it the installer program doesn't open. please help me this program is crucial for my upgrade training.
From: lisachao <[email protected]>
To: A1C PD <[email protected]>
Sent: Monday, October 24, 2011 12:35 PM
Subject: Problems with current version of AIR. Won't load and also can't uninstall
Re: Problems with current version of AIR. Won't load and also can't uninstall created by lisachao in Installation Issues - View the full discussion
Is this the error you are getting when you are installing AIR 3.0? Or is this the error you are getting after you've already installed AIR 3.0 and attempting to run AIR applications? If it's the latter, which applications are you trying to run? Can you please send us your logs so that we can investigate further? Thanks!
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3987820#3987820
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3987820#3987820. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installation Issues by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I having problem with the answer question for the App Store. And I forgot the answer

I having problem with the answer question for the App Store. And I forgot the answer

Pleae call 1800MYAPPLE ask to speak to account security

Having problem with the apple tv, because it still setting date and time and dont finish w the activation

having problem with the apple tv, because it still setting date and time and dont finish w the activation

That means it is having trouble connecting to the network. Make sure location is set correctly. Go to settings - general - network and ensure DNS is set to automatic. Check that your router is up to date. If on wifi try Ethernet.

Problem with scheduling ECMA Ver1.1 in build 4.1.3496.0 and build 4.1.3479.0

Similar Messages

Maybe you are looking for