Problem with Scratch Disk - CS4 - Mac

Under project settings, scratch disks, I have set everything to a folder on my external drive, and it shows me for each item that there is 1TB of space available. I am attempting to capture from my Panasonic camera. As soon as I start capturing, it shows me I only have 27.2MB of space available! This doesn't make any sense at all, and is not even enough space to capture this half-hour of footage; the capture keeps dropping frames and will only capture about 10 min of film.
I don't understand this program. Every time I capture video it seems to take up an unbelievably HUGE amount of space on my internal hard-drive. I have deleted everything I can find to delete on my internal drive, and deleted the trash as well, and it does show that I have 15 gigs available internally, but Premiere just can't seem to find enough space.
WHY, when I'm giving it 1 terabyte of space to use, does it tell me I only have 27MB of space available?? This should have taken me only half an hour to capture (I did one earlier that was just fine, but that seems to have taken the last bit of space available) and instead I have wasted the past 4 hours trying to figure this out.
Please help!!!

OMG - even tried rebooting my computer to clear RAM etc... and STILL it is showing me "Remaining disk space: 27.22 MB." I just cannot figure this out! And why did it capture just fine prior to trying this one (can't remember how much disk space it was showing me then, but I recall it was a lot more than 2 megabytes)? I didn't change any settings...
The program will only capture 9min ~25sec, then it says something like "unexpected recorder error" and stops the capture.
I really need to be able to capture this stuff - HELP, please???!!!

Similar Messages

Problem with scratch disk in CS4

Hi
I used Premiere Pro CS4 on my MacBook to import from my Panasonic DC-TM700 HD camera and set the scratch disks to an external disk.
But now there´s nothing on the external disk, and I got 8GB less space on my internal hard drive.
So it seems like all my footage was imported to the internal hard drive, but the promblem is: I can´t find it!
I´ve searched my mac for capture, scratch, log and premiere, but I still can´t find the folder. It´s not in the Premiere-folder in documents eather.
Where can this folder be?
Thanks
Lise

I used Premiere Pro CS4 on my MacBook to import from my Panasonic DC-TM700 HD camera and set the scratch disks to an external disk.
But now there´s nothing on the external disk, and I got 8GB less space on my internal hard drive.
sounds like you imported from your panasonic camera. Also sounds like you have no clue where they were being imported TO. There is one clue....which is having less space on your internal hard drive now ( 8gb). Leads us to believe that maybe you imported the video to your internal HD.
If you have any idea at all what sort of file extension your imported video would have ( eg. AVI, MOV, MPEG, etc ) you could do a "search" on that hard drive for any files that have the extension you saved the video as.
Once you find them on your hard drive you can do what you want with them.

The problem with scratch disk space.

I have been using Priemere products for over ten years now and have run into a problem recently using Premiere Pro that surprised me. I was editting a project last week that required me to reuse a lengthy clip several times. I would set a different in/out point with each use because the clip was not broken up into separate pieces when it was captured. This is the first time that I have had to do this with such a long clip so I never encountered this problem before. After saving a considerable amount of different versions of the same clip, I received a notice that the hard drive that I was saving the project in was full.
When I checked the project file I found that with each use of the long clip, Premiere would save the entire clip under the preview files sub-folder. This meant that in no time at all I had compiled a total of 35 gig of video files from a single 1.2 gig original. I determined after the fact that I could have redefined a different in/out point on the same original clip without having to reinsert it each time. This would have resulted in a much smaller preview file size.
I have two questions. First, is there some way for me to easily back out all of the duplicate clips from the project window of Premiere so that the preview sub-folder size decreases? Second, will Premiere always duplicate every clip that I select for the timeline in the scratch disk file? This seems like a tremendous waste of space even though it is suppose to improve realtime preview. I always thought that the project file just recorded the locations of the clips and when and where to use them. Maybe I have been wrong all of these years or maybe Adobe Premiere has become more demanding over the years. Either way, some clarification on these points would be greatly appreciated.

Consider a single clip that may contain 45 minutes of video. I wanted to use numerous segments from within that large clip in my video. So, I imported the same clip into the project window of Premiere for each segment that I wan't to use. Each time I imported the file I would set a different in/out point on it and drag that to my Timeline. After about the 10th import, Windows informed me that I had exceeded the storage capacity of the hard drive that my scratch disk was on. I have done numerous videos with both static and video images in the past and have never run into this problem. That was the nature of my inquiry.

Problem with FileUtils::CopyFile() CS4 Mac

Hi all,
I'm trying to copy some files from within my plugin into the Script Folder but the files don't get copied. I can create files within the folder and I also reach the files within the plugin (I think). Where is my mistake?
// The code
     const int MAXITEMS = 12;
          PMString scriptfiles[MAXITEMS] = {
               "scriptfile01.jsx",
               "scriptfile02.jsx",
               "scriptfile03.jsx",
               "scriptfile04.jsx",
               "scriptfile05.jsx",
               "scriptfile06.jsx",
               "scriptfile07.jsx",
               "scriptfile08.jsx",
               "scriptfile09.jsx",
               "scriptfile10.jsx",
               "scriptfile11.jsx",
               "scriptfile12.jsx"};
          PMString newscriptfiles[MAXITEMS] = {
               "newscriptfile01.jsx",
               "newscriptfile02.jsx",
               "newscriptfile03.jsx",
               "newscriptfile04.jsx",
               "newscriptfile05.jsx",
               "newscriptfile06.jsx",
               "newscriptfile07.jsx",
               "newscriptfile08.jsx",
               "newscriptfile09.jsx",
               "newscriptfile10.jsx",
               "newscriptfile11.jsx",
               "newscriptfile12.jsx"};
for (int i = 0; i < MAXITEMS ; i++) {
// go to the the source files
               IDFile theSource;//scriptfiles[i];
               FileUtils::GetPackageFolder(&theSource);
               FileUtils::AppendPath(&theSource, PMString("Versions"));
               FileUtils::AppendPath(&theSource, PMString("A"));
               FileUtils::AppendPath(&theSource, PMString("Resources"));
               FileUtils::AppendPath(&theSource, PMString(scriptfiles[i]));
// if i call the files within the package
// he seems to find them
               //PMString filename = theSource.GetFileName();
               //CAlert::InformationAlert(filename);
// go to the the target files
               IDFile theTarget;
               FileUtils::GetAppInstallationFolder(&theTarget);
               FileUtils::AppendPath(&theTarget, PMString("Scripts"));
               FileUtils::AppendPath(&theTarget, PMString("Scripts Panel"));
               FileUtils::AppendPath(&theTarget, PMString("MPO Launcher"));
//if the folder doesn't exist
               FileUtils::CreateFolderIfNeeded(theTarget,kTrue);
// get the new names
               PMString fn( newscriptfiles[i]);
               FileUtils::AppendPath(&theTarget, fn);
// if i use OpenFile it creates the files
//FileUtils::OpenFile(theTarget, "w");
// and this doesnt work. Why?
FileUtils::CopyFile(theSource, theTarget);

Found my error.
               FileUtils::GetPackageFolder(&theSource);
doesn't return the folder of the plugin.

I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes

I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes: I downloaded the last version (it's free), but I cannot do the same with iphoto, and more important: I need to know what is happening!!! Please help me!

Applications should not disappear all by themselves.
If they are then that coud indicate serious problems with your hard drive.
Backup everything up as quickly as possible.
Using Disk Utility verify your system disk.
Allan

Problem With Target Disk Mode

Folowing upgrade of my Mini and Powerbook to Tiger I have a problem with target Disk Mode when I attempt to eject the transfer to disk following transfer of my user file. I get an error message to the effect that files are in use and the disk can not be ejected. I try force quit (finder only is running) usually to no effect. Sometimes attempting to verify disk permissions in disk utility will clear the problem and allow me to eject the disk. One time it took close to an hour attempting to eject the disk. Is there another way?
PB Mac OS X (10.4.3)

I had this problem with external volumes like ZIP discs and also external hard drives. Sometimes it was an app used on one of the external files still being open (eg. Word for a text file) which had to be quitted first. The "trackpad" button equals the mouse button which is on the PowerBook. Repairing the target disk via disk utility might also help.

Problem with photoshop on my mac

Hey...
I have some problem with photoshop on my mac...
When i open the photoshop my screen change his color...
The screen changes such delicate blue color.
and when i close the app the color has back to the original color.
photoshop cs 6 (master collection)
macbook pro 15"
OS X Mountain Lion
2.3 i7
4 giga ram
Have a nice day

Not sure which screen you mean, but maybe your seeing the Application Frame in photoshop cs6.
You can turn that off in photoshop cs6 under Window>Application Frame.
If that's not it, could you post a screenshot?

I have problem with starting up my Mac Pro ?

Dear ,
I'have a problem with starting up my Mac Pro , please advice me how to start it

This may help.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now som

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek Randall

I don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

Why are there so many problems with the early 2008 Mac Pro ???

Hi everybody out there using Mac Pro's early 2008,
I found out there is a lot of problems with the early 2008 Mac Pro.
My early 2008 Mac Pro has been repaired ones under warranty and now it stopped working again ! Also see under: Mac Pro early 2008 no chime and does not start up. Why is this ????
It worked well for about 2 years and then it just fails and i had this failing issue twice already !!! Is this just a BAD Apple product or how do you think I need to approach this. Let’s face it, these machine don’t come cheap and you at least expect them to work without problems for 4-5 years. What is happening here ???
Cheers, Kavango

go to a black screen after 15 minutes or a couple hours
That is probably an indication that you need to find a new graphics card.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

Strange problem with color measure in Mac.

Hello, I am having a strange problem with color measure in Mac. For example i create a gradient in Photoshop from color 200 200 200 to color 240 240 240. When i measure the color of the gradient with the color measure tool of Photoshop or with the built in OS X color measure tool the measured color is from 200 199 197 to 240 240 238. I have measured the same gradient with Photoshop for PC and the values are OK (the same values that i create).
I dont know what is the problem, but i belive that the colors that i create would be the same that i measure after creating them, and also the same values between Mac and PC. I will appreciate it a lot any help or information that you could give me that helps me to understand what is happening here.
Thank you for your time
Marcelo.

Yep you got it, proof as monitor basicaly strips out any profiling and just delivers it straight.
is there any way to make the OS X color measure tool to measure the original color values
You mean the document colors - No, like I said photoshop is filtering your image through document profile, proof setup and monitor profile. Why do you want to use Digital color meter anyway for this?
i dont understand what is the point to measure color values that will change every time a calibrate my monitor.
Because color values are 'bigger' than whats on your monitor. Your monitor (via photoshop) is only doing the best it can to display those values - which can be anything from LAB colors outside the gamut of your monitor - to CMYK colors. Calibrating it is the only way to allow your monitor to do this in any way accurately. (not ever really possible) Monitors have a certain gamut and are only dispays/representations of the REAL colors that a document, with a profile, holds. So there's only one good reason to measure monitor values, and that's to generate a monitor profile.

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps freezing and Crashing. A simple thing like leaving the project idle for about 15 minutes, you come back and find that it has frozen. Also if you drag out a clip on the timeline you will find that the whole application freezes. Any possible solutions would be much appreciated.

Could be several factors at play here. This ARTICLE might give you some tips on getting your computer ready for an editing session. Note that there are some added tips on Win7, thanks to Black Viper, near the end.
If nothing is helping, then the tips in this ARTICLE might help you find some clues amongst the breadcrumbs left behind with a hang, or crash.
The link in this ARTICLE will give you some general troubleshooting tips.
If nothing improves, then please post back with more details. This ARTICLE will give you tips on what would be helpful.
Good luck,
Hunt

When login, i see a error message saying " there is a eminent problem with hard disk " smart check

G72-250US Notebook , Win 7 64 Home Premium,
Error :
When i login " There is a eminent problem with Hard disk, SMART check faled" ,Prmary hard disk self test failed .
Please help me with ths problem

Hi,
If this message is coming up in a black screen.
Then the harddrive in the system is about to go bad or already bad.
If you are able to boot to windows, FIRST BACKUP DATA.
Also run a startup test by tapping F2 as soon as you power on the system.
The smart test is a BIOS feature in most of the computer which is designed to keep cust informed if the HDD is about to go bad. But their are instances where the SMART will only let you know that the HDD is bad only when the HDD has bad.
More Info: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443317&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Although I am an HP employee, I am speaking for myself and not for HP.

I'm having problem with hard disk problem. I recently purchased HP pavilion G series notebook.

There is error displaying that there is a problem with hard disk please back up your data and contact manfature. I purchased these recently in 2011 december in india. Please help me what to do.

The error usually means what it says. Back up your data to a thumb drive or something before it crashes and call HP Support for a hard drive replacement.

Problem with Scratch Disk - CS4 - Mac

Similar Messages

Maybe you are looking for