Problem with screen brightness P500 after installing Windows 10

I Installed Win 10 yesterday. I can't change the display brightness since then. I have the latest driver for display adaptor ,dated July 2015 , that has been installed by windows 10. I tried to install the older driver for display adaptor from Lenovo site. But, Windows 10 does not accept that. I appreciate if you can help me!

I just installed a driver that solved my problem. Go to this link: http://answers.microsoft.com/en-us/windows/forum/windows_10-other_settings/any-windows-10-intel-core-i5-with-intel-hd-4000/d5b3284b-416c-41a3-8d87-f5766b3406d6?auth=1&rtAction=1440216456209 This is wonderful!

Similar Messages

Problem with switchable graphic cards after installing windows 10

Dear support, after installing windows 10 i lost option to switch my graphic cards. I already have installed new drivers for win10 64-bit. But it doesn't work. New drivers which i downloaded here: http://support.amd.com/en-us/download/desktop?os=Windows+10+-+64 doesn't support my graphic card. So i don't know what to do to get right drivers and be able to switch my graphic cards. Thanks for any help.

Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you installed Windows 10 and that switchable graphics is not working for you. I am happy to help. Unfortunately this is not something that AMD can help with, as it is a customized driver for your notebook. Did you do the Windows 10 installation as an upgrade and if so which operating system did you upgrade from? The existing HP drivers can be found here: HP Pavilion g6-1004ev Notebook PC but they are for Windows 7 or 8 depending on your choices. You could try those and install it using compatibility mode and see if that works. How to: Install and Update drivers in Windows 10 - answers.microsoft.com Let me know if that works for you.

Having problems with Labview 7.0 after installing Windows XP Pro

After updating Windows XP Pro from Windows 98, my programs give me the following error:
The procedure entry point SUnMapLS_IP_EBP_12 could not be located in the dynamic link library KERNEL32.dll
I tried reinstalling Labview 7.0, but to no avail.

Hello Becky,
I performed all the windows xp updates when I installed xp.
Our computer has labview 6.0 and 6.1 on it. I thought maybe they were causing a problem, so I tried uninstalling them. I downloaded msiblast and tried to remove Labview 6.0 and 6.1, but since they used to be on a network, and the university does not carry those programs anymore, they gave me errors. I was able to uninstall 7.0 and reinstall it, but it still gave me the same error as described in the original post.
I went into the registry and removed 6.0 and 6.1, but it still gives me the same error.
I need a way of removing 6.0 and 6.1 so that I can do a clean install of 7.0.
Thanks for your help,
Sergio
Attachments:
Serg_usf_Screen_Shot.doc ‏550 KB

Problems with driver for network after installing windows.

Hi. I have recently installed Windows 7 on my mac pro (from ultimo 2012). I've used boot camp for the installation. However it did not install the driver for my network. How can I get the driver??
I hope there are someone who can help me.

Hello Becky,
I performed all the windows xp updates when I installed xp.
Our computer has labview 6.0 and 6.1 on it. I thought maybe they were causing a problem, so I tried uninstalling them. I downloaded msiblast and tried to remove Labview 6.0 and 6.1, but since they used to be on a network, and the university does not carry those programs anymore, they gave me errors. I was able to uninstall 7.0 and reinstall it, but it still gave me the same error as described in the original post.
I went into the registry and removed 6.0 and 6.1, but it still gives me the same error.
I need a way of removing 6.0 and 6.1 so that I can do a clean install of 7.0.
Thanks for your help,
Sergio
Attachments:
Serg_usf_Screen_Shot.doc ‏550 KB

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

Problem with Itunes and NAS after installing latest version of Itunes

After installing the latest version of Itunes on my new PC (Windows 7 Ultimate) I have problems seeing the music off the Itunes server on my NAS.
I see the name of the NAS under tab SHARED (GEDEELD in dutch), but when I click on it, Itunes is making connection with the NAS but I see the music for less then a second.
Then the display goes back to the tab LIBRARY.
I've searched the web for this problem, checked on my firewall,... nothing to find. On another windows 7 PC, it is still working fine but this is an older version of Itunes.
So what can be the problem ?

No, I had not uninstalled it, I didn't realize I had ever installed it. I don't use it at all, never have. I uninstalled the MobileMe Control Panel then restarted my computer for good measure, and that appears to have resolved the issue! Thanks very much for your help!

Problem with Exchange 2010 scripts after installing PowerShell 4.0

Hi
After installing new updates for MS Exchange 2010 and PowerShell 4.0 I've got problems with PS scripts using buil-in
exchange commands.
I wrote interactive script for searching e-mails. Here is a pice of code where I get error after installing PS v4.
$SearchContent=Read-Host "Write sentence to find"
Get-Mailbox | Search-Mailbox -SearchQuery "$SearchContent" -TargetMailbox "Discovery Search Mailbox" -TargetFolder "Inner box" -LogOnly -Loglevel Full | Out-Null
After installing PowerShell 4.0 I get that bug and report in TargetMailbox is not genereated.
The property keyword isn't supported.
At C:\Administration\Scripts\T-SearchMail.ps1:122 char:1
+ Get-Mailbox | Search-Mailbox -SearchQuery "$SearchContent" -TargetMailbox "Disco ...
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo          : InvalidArgument: (:) [], ParserException
    + FullyQualifiedErrorId : 35E6C841
Using PowerShell 2.0 everything was ok.
How to solve this problem?
Tomasz
Kind Regards Tomasz

But http://blogs.msdn.com/b/powershell/archive/2013/10/25/windows-management-framework-4-0-is-now-available.aspx is dated
October 2013, while the current Windows Management Framework 4.0 System Requirements section states:
Servers that are running the following applications can now run WMF 4.0. The versions listed are the minimum releases required to run WMF 4.0.
Microsoft Exchange Server 2013 Service Pack 1
Microsoft Exchange Server 2010 SP3 with Update Rollup 5
Since
Update Rollup 5 For Exchange 2010 SP3 (KB2917508) was published Febrary 2014, shouldn't Exchange 2010 now be compatible with PowerShell 4.0?

Problems recovering HP Stream 7 after installing Windows 10 TP

Hi all
About a month ago I bought the HP Stream 7. Soon after receiving it, I installed Windows 10 TP, without first creating and saving a System Recovery Image on an external drive. While playing with Windows 10 TP, suddently the touch screen stopped working, as well as WLAN. The SD card is not recognized eiter (and I am unable to boot from it). I now can with Windows only when attaching an external USB keyboard. I am able to enter the BIOS (Power-Volume-Down).
I have been trying to revert to Windows 8.1, so far unsuccessful. I have tried the regular Windows recovery mechanisms - all fail. When booting from a USB 2.0 stick with Windows 8.1 32-bit install source attached to a bus-powered USB hub, I at least am able to boot, and I see that partition 4 is a recovery partition. Yet when mounting the partition (via DISKPART) in order to check for recovery images in the "Windows Images" folder I only get "Access denied".
Does anyone have advice on how to recover my HP Stream 7?
Thanks for reading!
/Maurice
This question was solved.
View Solution.

Yes, I don't think you can delete the partition with DISKPART, I think you should be able to delete all the partitions from the 8.1 installation GUI, select Advanced mode where it shows all the partitions? Delete them all and click Next and it should hopefully install to the clean disk. It works this way for Windows 10 at least. If this fails, you might also wipe the drive clean and install the latest version of 10 and then install the drivers from hp.com, I did that today and everything seems to be working well.
Also, FYI, it is not possible to boot from the micro SD slot, it apparently is not supported in the UEFI firmware.

Problem with getting PDF Options after installing Acrobat Pro 8.0

Hello
I have some problems after installing Acrobat Pro 8.0 on my MacBook Pro.
In the past I worked with Acrobat Pro 7.0.8. Then when I choose the printer Adobe PDF 7.0 I had always a pulldown menu in the Printer Settings. to decided what kind of PDF I want (Best Quality, PDF/1, PDF/3, Low Quality, etc)
After Intallion Acrobat Pro 8.0, I had both Adobe PDF 7.0 & 8.0 availible in the Printer Menu, but either the PDF Options is not availible for both (in some programs) or for both it is visible as "AdobePDFPDE70" but it has a line through it and I cann't select it.
Then I delete Adobe 7.0 & 8.0 from the folder "/usr/libexec/cups/backend/" and started Adobe Acrobat Pro 8.0 again. It recognised that an Adobe PDF need to be installed but again it is not availible or AdobePDFPDE70 has a line through.
I have still installed Adobe Pro 7.08 on my MacBook Pro because their is no PitStop Professional availible for Adobe Acrobat 8.0
Who can help me to make my PDF Options Availible. I also looked at the Adobe Site for a Solutions but I found only 4 Threads for Acrobat 8 in combination with OS X and it was regarding other problems.
I work with German OS X and german Versions of Acrobat and PitStop
Regards
Gerard
MacBook Pro 17" Mac OS X (10.4.8)

Hello
I solved the problem. The files "AdobePDFPDE700.plugin" & "AdobePDFPDE800.plugin" conflict each other.
I solved it in the following way
- quit Adobe Acrobat
- delete Adobe PDF 7.0 & 8.0 From the Printer Manager
- remove the file "AdobePDFPDE700.plugin" & "AdobePDFPDE800.plugin" from /Library/Printers/PPD Plugins/
- restart Adobe Acrobat Pro 8.0 and activate its self repair function from within the Help menu
- quit Acrobat and re-boot your Mac
- a Printer & "Adobe PDF 8.0" will be availible. Now the PDF Options are availible in all the Programs I working with!
I experienced that the Acrobat Pro 7.08 is very unstabil after the Installation of 8.0, let's hope that PitStop will bring very soon a new Version compatible with Acrobat 8.0

Problems with ABAP Keyword Documentation after install Internet Explorer 7

After install Internet Explorer 7 I see left frame with tree in ABAP Keyword Documentation, but don't see right frame.
I find note 857216, but it not approach.
Product Version SAP R/3 ENTERPRISE 47X200
SAP GUI 620 Final Release 6206.6.62.970
Internet Explorer 7.0.5730.11

Once the page is opened, try to refresh the page a few times. I have seen this couple of times but just refreshing the same will solve the problem I believe.
Regards
Kathirvel

I have problem with my macbook pro after installing lion

i have problem with macbook,after i install mountain lion its totaly go bad,its start to stack,get wery wery slow( i have macbook pro with i7 procesor) and its works like computer 20 years back.what shud i do? can i uninstall lion?? i want that my macbook be the same like before.pleas help me!

You can do some basic diagnostics, first open Disk Utility and Repair Disk Permissions. If that does not help I woudl think you got a corrupt download of ML and need to re-download from the Mac App Store and reinstall. Hopefully you have been backing up and have a stable backup system.

Problems with /usr/local/lib after installing

After I installed Leopard, I noticed that some of my files in usr/local/lib seemed to have disappeared. When I tried to open /usr/local/lib I got the following error: 'lib: Too many levels of symbolic links.' and it appeared that there was also a 'lib 1' directory in /usr/local which had all of my files in it. I managed to fix it using:
sudo rm -rf /usr/local/lib
sudo cp -R '/usr/local/lib 1' /usr/local/lib
Just wanted to give a heads up since this was rather annoying to figure out. Other than this I have very few issues with leopard, so far limited to:
-DivX playback doesn't appear to work
-after login it appears to take a while for finder to start
-a few problems mounting external devices, such as my USB drive and iPhone

I’ve found this on my system as well! I had some trouble installing MacFuse under Leopard. The installer just said "Das Installations konnte einige Dateien nicht nach '/' kopieren. Wenden Sie sich an den Hersteller", which basically means that it couldn't write to the root directory.
Then I found out about the /usr/local/lib symlink. This is very disturbing and clearly a major bug. I think it's a problem with the installation process of the developer tools. I’ve upgraded to Leopard two weeks ago. Everything worked. Then I’ve installed XCode 3.0 this and then the problem started. The circular symlink in /usr/local/lib has the timestamp of the XCode 3.0 installation…

Problems with Java 1.5+ after installing new "Software Updates".

I downloaded the regular 'software updates', now my macbook pro won't open Vuze, instead coming up with the message " Cannot launch "Vuze Installer". No compatible version of Java 1.5 available." Then it won't let me "Open Java Preferences". What do I do???

This is silly. Just because you don't know Vuze doesn't mean there's no problem with this update. My friends are having the same issue, of course we are looking at possible problem from Vuze's part but we cannot really say this update has 100% nothing to do with Vuze's launch failure, can we?
P.S. Since Vuze is not banned by law, it's still legal to use it. It's up to people if they want to use it for good or bad.
dogquake

Problem with black screen and crashes after installing windows 7 and bootcamp

K, so I partitioned my internal HD using Bootcamp, installed a new copy of Windows 7 Home, put in my Mac OSX disk and installed the additional stuff. I can successfully log in to Windows and open the browsers I have installed: Comodo dragon and Mozilla FF. McAfee auto installed with FF and I have Comodo Antivirus installed.
However, within minutes of use, my screen goes black, the computer does not shut down and reboot, I have to press the power button and wait a few secs for it to shut down then reboot. This has happened from both browsers while in Windows on Facebook in a game; while trying to save an attachment from an email via webmail and also while checking the inbuilt Windows settings for the display.
The latter produced the following report (below) on reboot and when I hit the "look for a solution" button, the actual window vanished after a few secs.
2 additional bits of info which may or may not be related:
a) running windows troubleshooter I discovered I have prob with:
driver for Inter (r) 5 series /3400 series chipset Family USB Universal Host Contoller - 3B3B
- I Googled this and it seems a common prob. Tried the reinstall, didn't work, so disabled it as suggested on some of the forum posts.
b) The OSX side of my computer seems to run fine most of the time, tho I have had the odd back screen, then wait, press reboot to power on and off in past as related in this post last month: https://discussions.apple.com/thread/4844797 (maybe a kernal panic..???)
Would anyone know what is causing these probs or what I can do about them? My computer is no longer under warranty and the couple of times I had probs while it was, I was told the probs were to do with the power supply and given a new one, I'm not sure if they looked at the logic board. The OSX side has also had an ongoing prob to do with sudden shrinkage of the image content, which I mentioned to the geniuses at the Apple store b4, but as it wasn't acting up there they couldn't do anything about it... ( looks as tho sm1 changed the screen resolution and whatever is in the browser window shrinks, tho desktop, is never effected - if that makes sense!.)
All in all tho, does make me wonder if the prob is based in the graphics switching..???
Problem signature:
Problem Event Name:    BlueScreen
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    2057 Additional information about the problem:
BCCode:    333
BCP1:    0000000000000001
BCP2:    0000000000000002
BCP3:    0000000000000003
BCP4:    0000000000000004
OS Version:    6_1_7601
Service Pack:    1_0
Product:    768_1 Files that help describe the problem:
C:\Windows\Minidump\032413-20872-01.dmp
C:\Users\KittyH\AppData\Local\Temp\WER-166952-0.sysdata.xml Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

When booting up hold down the option key and pick the Mac startup disk. To make it automatic, once in your Mac side go to preferences, startup disk and pick the Mac disk. Next time you boot up it will boot up to Mac OS.

Problem with screen brightness P500 after installing Windows 10

Similar Messages

Maybe you are looking for