Problem with Screen Painter - Graphical Layout Editor.

Hi Friends,
I have a strange problem with my Graphical Layout Editor. I first had the problem that the alphanumeric Editor gets displayed even the checkbox for Graphical Layout Editor is checked. Then I had gone through sdn forums and found that the eumfcdll.dll was missing.Thanks to sdn forums. When I copied that file into the path specified it worked fine. But the problem is my layout screen is not displayed fully. It is just displayed at the top of the window and only in that region I can drag and drop the elements. Remaining part of the window is uneditable.
what is the problem? Do I need to make any further settings?
Regards,
Raju.

try to re-install GUI patch .
Yeah , its like CNTLALTDEL(restart) , So half of the problems get resolved.
regards
prabhu
Message was edited by: Prabhu Peram

Similar Messages

SAP GUI 7.20 for Windows and problem with Screen Painter

Hello,
I just installed the SAP GUI 7.20 for Windows and it looks good.
But when when I start the Screen Painter for a dynpro I get the following message:
Graphical Layout Editor not available. Continue with alphanumeric editor.
And: EU_SCRP_WN32 Connection broken '..' / CPIC
The SCreen Painter is installed correctly (I can start ist manually from file system) and the RFC destination works.
Any idea?
Regards,
Ole.

Hello,
I've uninstalled all SAP installations, cleaned the registry of Windows XP and deleted all folders with SAP content. Then I've installed the SAP Gui 7.20 again and it works.
And now I will update the Screen Painter with the information from the OSS-Note!
Thank's for your help!
Regards,
Ole.

ABAP : Screen Painter - Graphical layout

Hi Experts ,
I am doing an assignment for the screen painter. but when i click on the layout of it , I am not getting the graphical input. kindly advise. is there some new setting to made.
thanks & regards ,
M.S

Hi M.S,
If the setting is already check, then the problem is in GUI. While installing GUI there is a option for Screen painter. You need to check it at GUI inatall
For patch details refer [Graphical Layout Editor|http://help.sap.com/saphelp_nwmobile71/helpdata/en/d1/801b77454211d189710000e8322d00/frameset.htm]
Regards
Edited by: Rajvansh Ravi on Nov 26, 2009 6:20 AM

Problems with screen painting in safari?

Ever since upgrading to Mountain Lion, I have problems in Safari on a regular basis with the screen not updating/refreshing/repainting properly. It's seem particularly bad when typing in a text box on a web page, for example GMail when composing an email or when using Facebook website. When typing, characters are captured but do not show on screen (they are there...I can shift+backspace and then copy the characters).
Anyone else seen this problem or have suggestions? Using a 15" Macbook Pro late 2011 model.
Thanks!

Here is an example:

Graphical layout editor for screens

I am using SAP gui 6.40 and have installed patch level 23.
Still i cannot see the graphical layout editor in se51 and only alphanumeric editor is available (the flag for graphical layout editor in utilities> settings is checked).
any hints??
regards,
Priyank

Option 1:
In your computer Go to Start > Run> Type gneux.exe > Click OK>A popup message may come containing the message "EUMFCDLL.DLL is missing."
[Note: gnuex.exe is the responsible executable file which allows the graphical layout editor to run. So copy this particular .dll file from any other computer(in SAP system network) in which module pool is perfectly running. How to copy? Suppose in anyone's computer layout editor is running. Just Go to Start>Search results> search for the dll file EUMFCDLL.DLL. From the search result, from the specific path copy that .dll file and take it as backup on any sharable directory or any storage device.]
Copy that EUMFCDLL.DLL file and put it in your own computer's \SAP\FrontEnd\SAPgui location.
Now again check.
Go to Start>Run>Type gneux.exe>Click on OK. This time any popup window containing error message won't come. But, graphical layout editor will open.
This is just for testing.
Now on SE80 open run layout editor. If it doesn't open properly for the first time, then open & close it for 2-3 times. It'll work.
Same problem occured in my computer. And I put the copy of that particular.dll file in my computer's SAPGUI, it worked.

Graphical Layout Editor

Hi,
I am facing a problem with the Screen Painter Editor. When I am changing from the Module to the Layout, the editor is opening in the old fashion editor, so it is too difficult for me to design a screen, espacially when I have to design a StepLoop, etc. I am checking the settings (Utillities->Settings->ScreenPainter) and the Graphical Layout Editor is activated. I have try to deactivate and activate it again, but the result is the same - nothing.
Have anybody any idea? Thanks in advance.
George

Hi
THis is a BASIS Problem , the GUI is not installed Properly, Contact your BASIS Admin
While installing the GUI they need to select the GUI explicitly which they need to look into at
Hope this serve your purpose
Cheers
Ram

GUI Problem in Screen Painter

Hi All,
we are using SAP logon 640. In screen painter we are not getting GUI. we are getting the screen in Alphanumeric mode, But not in Graphical mode. How to resolve this problem.
Thanks in Advance.
Regards,
chandra.
Message was edited by: K Chandra Sekhara Reddy

Hi k chandra,
1. I supppose, the alphanumeric
screen painter comes up.
2. When it comes up,
 UTILITIES------>SETTINGS
3. a new window will come
 TICK the chekbox for
 'Graphical Layout Editor'
4. Then try, it will work.
5. If still it does not work,
 then another problem could be
 SAP GUI Installation.
6. When installting sap gui,
 we have to select the component for
 Screen Painter GUI.
(Probabably it was not selected when
installing on your machine)
7. Then it will come.
regards,
amit m.

Problems in screen painter

Hi,
whenever i used to open my screen painter for editing layout its giving me only alpha screen even i have checked the option in utilities or unchecked tell me what should be the problem

Hi,
Go to menu Utilities of screen painter
User specific settings
Select the tab Screen painter
Select the check box Graphical layout editor.
Hope your problem will be solved.
Reward if helpful.

ABAP Dump - Graphical Layout Editor

Hi...I get an ABAP Dump when I try to start the Graphical Layout Editor (to modify a screen layout). Here are a few lines from the dump:
&INCLUDE INCL_INSTALLATION_ERROR
What happened?
The current program had to be terminated because of an error when installing the R/3 System. The program had already requested 789763632 bytes from the operating system with 'malloc' when the operating system reported after a further memory request that there was no more memory space available.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer termination messages, especially those beyond their normal deletion date.
Set the system profile parameters
- abap/heap_area_dia
- abap/heap_area_nondia to a maximum of 789763632. Then reduce the value by 10.000.000 to be on the safe side.
Then restart the SAP System.

Here's what I know so far:
- I can logon to SAP but can NOT start Graphical Layout Editor from my machine using my user account.
- Other people can logon to SAP but can NOT start Graphical Layout Editor from my machine using their user accounts.
- I can logon to SAP and start Graphical Layout Editor from a DIFFERENT machine using my own user account.
- Other people can logon to SAP and start Graphical Layout Editor from a DIFFERENT machine using their own account.
I have access to more than one SAP systems (different SAP instances) and I have tested the following:
- I can logon to a different SAP system/server (from this same machine) and start the Graphical Layout Editor without error.
- Other people can logon to a different SAP system/server (from this same machine) and start the Graphical Layout Editor without error.
The problem is not likely with low memory on my machine because I have 2 GB RAM whereas these other computers I've tested only have 512 MB or 1 GB memory. I don't see how the problem could be with the SAP server when other people are able to start the Graphical Layout Editor from their machines and even I can start it from their machines. The problem can't be with the SAPGUI files on my machine because I can start the Graphical Layout Editor using a different SAP system/server. I am completely stumped. Any ideas??

I have already done the following:
- Uninstall SAP GUI using the "Add Remove Programs" & reinstall it
- Uninstall SAP GUI using the option provided by SAPGUI setup & reinstall it
- Uninstall SAP GUI using the option provided by SAPGUI setup & rename the folder "C:\Program Files\SAP" then install it again.
- Upgrade from SAPGUI v6.40 to v7.10. I'm now using v7.10
Don't forget that I am able to start the Graphical Layout Editor for a different SAP server using this same SAPGUI from this same computer. I don't think the problem is with SAPGUI but I appreciate your response.

Re:Graphical layout editor not available

Hi SAP gurus
I am not getting Graphical layout editor when I am running transaction code SE51.It is showing only text editor
please solve this issue its an urgent
Sekhar.k

Hi,
If you are not getting the screen with all the options after pressing the from layout for designing the screen and instead you are getting some damp screen. It can be a problem with the SAP GUI. You need to reinstall it in your system. Cannot help it. Contact your administrator.
Jayant Sahu

SAPGUI 710 Graphical Layout Editor not available in LAN

Hi,
I recently installed sneakpreview NW04s for ABAP at home and the SAPGUI 710 software. The graphical layout editor doesn't work. I have checked all requirements such as, required dll and exe files. They are all available. The problem occurs only when I try to start the graphical editor from another pc in my LAN. If I start it on the application server where I have installed NW04s and the SAPGUI, it works fine. Only when I access to the application server from other pc in my home network, it fails to start the graphical editor. I've read that there must be a problem with firewall / port somewhere. I don't know where I can check whether this is the cause. I am using D-Link wireless for my home network.
Can anybody help me with this?
Thanks in advance,
Shahram

I tried SM59 and ran a connection test for EU_SCRP_WN32. It started gnetx.exe, the window appeared shortly. But, the connection failed with the following error message:
ERROR                timeout during allocate
LOCATION             SAP-Gateway on host OFFICE / sapgw00
DETAIL               no connect of TP gnetx.exe from host %%SAPGUI%%
COMPONENT            SAP-Gateway
COUNTER              5824
MODULE               gwr3cpic.c ;
It seems that my laptop cannot establish an RFC connection to the application server. the service file on my laptop has the right entry for the application server.
Any ideas?

Graphical Layout Editor not Available.

when i login to sE51 and execute the program ZAUTHSCR and press the layout button
I am gettign a message that Graphical Layout Editor not Available.
As a SAP Administrator pls let me knwo what has to be installed for this

Hi,
This seems a SAPGUI problem. Please check if all the development components of your SAPGUI are installed (you can do this by running the sapgui installation again and choosing the add-remove components option. From there you can check which components are installed). I think the graphical painter component has not been installed. Also apply the latest patch for your SAPGUI.
Do let us know if it works.
Regards,
Angad

Iam not able to get the GUI Graphical Layout editor

Dear Freinds
can any body let me know what are the support package which has to be applied
to get the Graphical layout editor...........when iam trying to select the Graphical layout editor in Screen painter ( it is givin error) .........as the Gui is not being properly installed.
could anyone letme know which patchi have to apply.
regards
vamsi

Dear Vamsi,
You can contact your Basis team. They would need to apply a patch so that you wan view the GUI Layout Editor.
graphical screen painter layout not working
Regards,
Naveen.

How to increase formUID to a form created with screen painter

Hi,
I've got a problem with my form. I created a form with screen painter but i can't succeed to increase my UID form.
For example, when i open my first form, the UID is always at FP_0.
My script:
private string FormUID = null;
public FP_Form(int NumInstance_)
 this.NumInstance = NumInstance_;
this.FormUID = "FP" + NumInstance.ToString();
 load();
 oDBDataSource = oForm.DataSources.DBDataSources.Add(DBDataSourceTable);
 SBO_Application.ItemEvent += new SAPbouiCOM._IApplicationEvents_ItemEventEventHandler(SBO_Application_ItemEvent);
private void SBO_Application_ItemEvent(string _FormUID, ref SAPbouiCOM.ItemEvent pVal, out bool BubbleEvent)
 BubbleEvent = true;
 try
if (_FormUID == this.FormUID) //here "_FormUID" is increased but "this.FormUID" is still = FP_0
 switch (pVal.EventType)// selon le type d'action executée
 case SAPbouiCOM.BoEventTypes.et_FORM_LOAD:
 if (pVal.BeforeAction == true)
 SAPbouiCOM.ComboBox List_reseau = (SAPbouiCOM.ComboBox)oForm.Items.Item("5").Specific;
 List_reseau.ValidValues.Add("1", "test");
 break;
 case ...
 break;
Please help.
Regards,
Zakia.

Hi J.
The answer is yes You just have to give your form a unique id.
1) Give your form in screen painter a name like BTWO_DYNAMIC_UID (just plain text).
2) Make sure your FormType and appformnumber have a unique number (i.e. 2000060001). You can do this in the xml source.
3) By loading your document replace the BTWO_DYNAMIC_UID with an unique id. I have a counter that's a member of my class and increase that number to get a unique id (BTWO_F_1, BTWO_F_2 etc)
I have added a code sample, SBOApplication is my SAP application object and mFormNumber is a member (integer) of my class.
Succes d'r mee, en als 't nie lukt hoor ik het wel... ;)
Code (C#):
// New xml document
XmlDocument oXmlDoc = new XmlDocument();
private Form LoadUniqueForm(string AMyFile)
// Define your path to
sPath = @"Forms" + AMyFile;
// Load the form
oXmlDoc.Load(sPath);
// Replace the string with an unique id
mFormNumber++;
string sXML = oXmlDoc.InnerXml.Replace("BTWO_DYNAMIC_UID", "BTWO_F_" + mFormNumber.ToString());
// load the XML file in SAP
SBOApplication.LoadBatchActions(ref sXML);
// Return the form
return SBOApplication.Forms.Item("BTWO_F_" + mFormNumber.ToString());

Problem with my amd graphic card

Hi.. I have a problem with my amd graphic card.. The card is amd radeon 6770m.. I did format on my laptop and when I tried to install the catalyst center which includes the driver, it displays a message which say that catalyst center stop working... I have downloaded all the versions of the driver since 2011 when I bought the laptop... But I have the same problem whichever version I try.. I also have updated the bios to the last version but nothing happens..I think maybe graphic card is broken.. Thanks for reading..

Hi @Lefteris93 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your I would uninstall all the software and drivers for AMD High-Definition (HD) Graphics Driver and Catalyst Control from the control panel and the Device manager. Restart the notebook and download from here.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase. This will help update the drivers that have been installed on the Notebook. If you graphics card was damaged or not functioning you would have a black or blank screen.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Problem with Screen Painter - Graphical Layout Editor.

Similar Messages

Maybe you are looking for